An investigation of matches of bottom fermented red beers with cheeses

This study was designed to explore the hedonic response of consumers to cheese and beer pairings by tasting in a typical social environment of consumption. Ninety-six regular beer and cheese consumers hedonically rated all fifty-six pairings of eight bottom fermented red beers and seven cheeses (Parmigiano Reggiano, Fontina, Taleggio, Smoked Provola, Mozzarella, Caprino, and Gorgonzola).Preference varied across samples (p < 0.001). One consumer out of two appreciated all of the pairings, yet pairings with Mozzarella were liked moderately. One consumer out of three appreciated pairings with Parmigiano, were neutral in their hedonic response to pairings with Fontina and disliked moderately the remaining pairings but those including mozzarella were extremely unappealing to them. One consumer out of six disliked all the pairings tested but some matches with Parmigiano were liked slightly. Liking of cheese and bottom fermented red beer pairings is biased by the type of cheese partnered with beer (Parmigiano most liked and Mozzarella least liked); by the type of beer partnered with cheese, and by the liking of the sensory properties of the beers and of the cheese tasted alone. However, consumers do not simply enjoy a combination of their most preferred beer and cheese. They identified some flavors that harmonize better than do others. Also, significant correlations between mean liking scores and sensory characteristics of the fifty-six pairings were found. Beer flavor is modified largely by prior cheese consumption. Each cheese has an effect on beer flavor and this effect is consistent over the eight different beers. In general all of the cheeses decreased the intensity of fruitiness, sweetness, perceived level of carbonation, perceived level of alcoholicity, caramel-like, licorice-like and burnt notes. Bitterness, astringency, and burnt notes were reduced by most of the cheeses but Fontina and Smoked Provola increased the perception of these attributes. For brewers to profitably exploit the potential of the science of cheese and beer pairing the choice of a suitable beer and of a suitable cheese in terms of liking and sensory properties and the identification of a proper target audience familiar to the beers paired with cheese are essential.     

Effect of hot water treatment of in-shell pecans on physicochemical properties and consumer acceptability of roasted pecan kernels

The effect of hot water pre-treatment of in-shell pecans on physicochemical properties, consumer acceptance and purchase intent of dehulled and roasted kernels was evaluated. In-shell pecans were first subjected to hot water at 70, 80 and 90 °C for 8.6, 6.6 and 4.6 min respectively and kernels were later dry roasted at 160 °C for 10 min. The physicochemical properties of hot water treated and untreated nuts, before and after roasting were determined. Furthermore, consumer acceptance and purchase intent of the roasted kernels were determined. Hot water treatment, alone and subsequent roasting had minimal effect on pecans’ physicochemical properties. Consumers liked (P < 0.05) the colour and aroma of treated pecans. No effect (P > 0.05) of pre-treatment was observed on the acceptability of other sensory attributes. Safety claim increased treated pecans’ overall liking; however, it decreased purchase intent. Hot water treatment showed promise as a post-harvest microbial intervention strategy without affecting the physicochemical properties and consumer acceptability.     

A preliminary study of the quality attributes of a cloudy wheat beer treated by flash pasteurization

Flash pasteurization (37 and 100 pasteurization units, PU) and conventional tunnel pasteurization (15 PU) processing of wheat beers were evaluated by examining their impacts on microorganisms, colour, colloidal haze and flavour stability during 84 days of storage at 20°C. The results revealed that the microbiological stability of 37 and 100 PU flash‐pasteurized beers was comparable with that of the 15 PU sample, and the development of both yeast and lactic acid bacteria was inhibited for 84 days of storage. The conventional tunnel‐pasteurized wheat beer resulted in a higher thermal load relative to the flash‐pasteurized samples based on the results of oxidative stability. These three pasteurized beers showed a similar decrease in haze intensity throughout the storage period. Meanwhile, flash‐pasteurized beers had better colour and colloidal haze stability than the tunnel‐pasteurized beer. It was also found by dynamic light scattering analysis that the temperature in the flash pasteurizer has the desired effect on the protein denaturation and particle size distribution. Therefore, flash pasteurization is a promising method to increase the shelf‐life of wheat beers instead of conventional tunnel pasteurization. Copyright © 2017 The Institute of Brewing & Distilling     

A preliminary study about the influence of high hydrostatic pressure processing on the physicochemical and sensorial properties of a cloudy wheat beer

High hydrostatic pressure (HHP) (400 MPa/15 min, 500 MPa/10 min, 600 MPa/5 min at 20 °C) and heat (60 °C/15 min) processing of wheat beers were evaluated by examining their impacts on microorganisms, colloidal haze, flavour, foam stability and shelf‐life prediction during 84 days of storage at 20 °C. The results obtained showed that the microbiological stability of HHP beers was comparable with heat‐treated samples, and the development of both aerobic bacteria and lactic acid bacteria was inhibited for 84 days of storage. The main parameters of the wheat beer, such as ethanol content, original extract, pH, bitterness and viscosity, were scarcely affected by either treatment compared with the control samples; however, heat pasteurization increased the colour value. Heat‐pasteurized beer resulted in an increase in the phenethyl alcohol concentration and a decrease in isoamyl acetate and ethyl acetate levels compared with the HHP samples. These treatments did not affect the amount of 4‐vinylguaiacol and 4‐vinylphenol in the beer. The HHP‐treated beers had higher colloidal haze and foam stability values than the heat‐pasteurized beers. Dynamic light scattering analysis showed that HHP treatments at 500 MPa/10 min resulted in smaller and more uniform particle sizes, which had a positive effect on beer haze stability during storage. Copyright © 2016 The Institute of Brewing & Distilling     

Different Oils and Health Benefit Statements Affect Physicochemical Properties,Consumer Liking,Emotion, and Purchase Intent: A Case of Sponge Cake

Effects of different oils on physicochemical properties, consumer liking, emotion, and purchase intent of sponge cakes were evaluated. Three healthy oils (extra virgin coconut oil, EVCO; extra virgin olive oil, EVOO; rice bran oil, RBO) compared with butter (the control), were used at 20% (w/w, wheat flour basis) in sponge cake formulations. Five positive (calm, good, happy, pleased, satisfied) and 3 negative (guilty, unsafe, worried) emotion terms, selected from the EsSense Profile^® with slight modification using an online (N = 234) check‐all‐that‐apply questionnaire, were used for consumer testing. Consumers (N = 148) evaluated acceptability of 9 sensory attributes on a 9‐point hedonic scale, 8 emotion responses on a 5‐point rating scale, and purchase intent on a binomial scale. Overall liking, emotion, and purchase intent were evaluated before compared with after health benefit statement of oils had been given to consumers. Overall liking and positive emotion (except calm) scores of sponge cake made with EVCO were higher than those made with EVOO and RBO. Specific volume, expansion ratio, and moisture content of control, EVCO, and EVOO were not significantly different, but higher than RBO sponge cake. JAR results showed that sponge cake made with RBO had the least softness that was reflected by the highest hardness (6.61 to 9.69 compared with. 12.76N). Oil (EVCO/EVOO/RBO) health benefit statement provided to consumer significantly increased overall liking, positive emotion, and purchase intent scores while decreased negative emotion scores. Overall liking and pleased emotion were critical attributes influencing purchase intent (odds ratio = 2.06 to 3.75), whereas calm and happy became not critical after health benefit statement had been given.     

Influence of functional information on consumer liking and consumer perception related to health claims for blueberry functional beverages

The objective of this study was to investigate the impact of functional labelling on the consumers acceptability and purchase intentions of blueberry functional beverages (BFB). A 2‐day consumer acceptance test was conducted independently with functional information (n = 60) and without any information (n = 80). The presence of functional labelling did not influence the liking attributes of BFBs (P > 0.05). However, functional information positively affected consumer perception of health‐related perceptions associated with BFBs, such as ‘aiding eye health improvement’ and ‘eye fatigue relief’. Subjects perceived more health‐related perceptions when informed test was conducted. The first‐order effect was observed, in which the degree of the first‐order effect was greater for BFBs that had a thicker mouthfeel. Findings from the results can practically guide product developers and marketers in the functional drink industry by providing the strategy for how to evaluate reformulated functional beverages for the consumer acceptance test by warning a counter‐balanced sample presentation.     

Personality traits and bitterness perception influence the liking and intake of pale ale style beers

Bitterness is classically considered undesirable in foods and beverages. Yet, widespread commercial success of beers (like Bitters in the UK or IPAs in the US) indicate bitterness is desirable for some consumers. Here, we tested whether personality traits influence beer liking and intake. Under laboratory conditions, beer consumers (n = 109) rated liking and intensity of 2 pale ales and a lager, and intensity of two bitter solutions (quinine, Tetralone®). Participants also completed intake and personality questionnaires (Sensation Seeking, Sensitivity to Punishment and Reward, and Food Involvement). A liking ratio for each beer was calculated from each participant’s liking for that specific beer and their total liking for all beers. Participants were classified as weekly, monthly, or yearly pale ale consumers using intake data. Using intensity ratings, personality measures, and other parameters, hierarchical linear regression was used to predict liking ratios, and logistic regression was used to predict beer intake frequency. A significant interaction between Sensation Seeking and quinine bitterness (p = 0.03) was found for the liking ratio of a pale ale. The interaction revealed liking of the pale ale increased with Sensation Seeking but only if quinine bitterness was also high. Intake models showed increased odds of frequent pale ale intake with greater quinine bitterness and lower liking for lager beer. These data suggest liking and intake of pale ales is positively related to Sensation Seeking and bitter taste perception. Contrary to findings in other bitter foods and beverages, the high bitterness found in pale ales may be desirable for some consumers.     

Effects of colorant concentration and ‘natural colour’ or ‘sodium content’ claim on saltiness perception,consumer liking and emotion,and purchase intent of dipping sauces

Natural colorant (no colorant, NC = 0%; moderate colorant, MC = 1.2%; high colorant, HC = 3.6% w/w) and salt (regular salt, RS = NaCl; reduced sodium, ReS = KCl; no salt, NS) were added in mayonnaise‐based dipping sauces to evaluate effects of colorant concentration and ‘natural colorant’ or ‘sodium content’ claim on saltiness expectation, consumer liking and emotion, and purchase intent (PI) of these products. Regardless of the salt type and content, increasing colorant concentration decreased colour liking scores while saltiness expectation tentatively increased as indicated by higher % of ‘too much’ responses for saltiness on a JAR (Just‐About‐Right) scale. At a given salt type and content, liking scores of salty taste decreased with increasing colorant concentration, both before and after the ‘sodium content’ claim was given to consumers. Emotion scores elicited by consuming dipping sauces were affected by colorant concentration. Positive emotions (good, interested, satisfied) decreased while negative emotions (guilty, unsafe, worried) increased with increasing colorant concentration. Statements of ‘natural colorant’ and ‘sodium content’ claim had minimal effects on elicited emotions and PI.     

Perception of Beer Flavour Associates with Thermal Taster Status

Beer flavour, and thus much of the consumer experience of beer, is determined by the sensations elicited when it is taken into the mouth. Thus, individual differences in the perception of these oral sensations may contribute to the variation in consumer behaviour. A new taste phenotype shown to associate with the intensity of oral sensations elicited by simple solutions is thermal taster status (TTS). Thermal tasters (TTs) perceive ‘phantom’ tastes with thermal stimulation of the tongue, while thermal non‐tasters (TnTs) do not. Here, we investigate the effect of TTS on the perceived intensity of bitterness, sourness, sweetness, fullness, carbonation and overall flavour intensity elicited by seven beers representing classic styles — wheat beer, brown ale, pale ale, low‐alcohol lager, standard lager, high‐alcohol lager and stout. A strong trend was observed for TTs (n = 20) to rate attributes higher than TnTs (n = 20) for all beers except the stout, with these differences significant in many instances (ANOVA or binomial analysis). It is concluded that TTS may be an important determinant of individual differences in the perception of beer flavour, but beer liking and preference are more complex phenomena than can be accounted for by this phenotype alone.     

The influence of unmalted barley on the oxidative stability of wort and beer

The aim of this study was to investigate the influences of unmalted barley on the brewing process and the quality of the resulting beer‐like beverages, with the main focus on the oxidative stability, using traditional beer analyses, GC‐MS for the determination of aging compounds and electron paramagnetic resonance spectroscopy to determine free radical activity. For the investigation, brews with different barley proportions and 75% barley brews with a colour malt addition, to compensate for a lower colour using barley, were produced. In general, it can be said that beers with a proportion of up to 50% barley achieved a comparable or higher extract yield and final attenuation owing to the combined effectiveness of the malt and microbial enzymes. Although all analytical values were within the normal range according to Methodensammlung der Mitteleuropäischen Brautechnischen Analysenkommission (MEBAK), a slight decrease in total polyphenols and free amino nitrogen content was observed. Also in response to higher barley portions, an increase of higher molecular weight proteins and β‐glucan was detected. Barley is not exposed to heat and oxidative stress in the malting plant, which explains the lower values of the thiobarbituric acid index and colour as an indicator of Maillard reaction products in the resulting wort and beer. Additionally, the results demonstrate a slower increase of aging compounds during beer storage with increasing barley proportions. Furthermore, it was observed that higher barley proportions led to a better oxidative stability indicated by a lower radical generation (T₄₅₀‐value) in wort and an increasing beverage antioxidant index/endogenous antioxidative potential (BAX/EAP value) in the final beverage. The case of ‘barley beers’ showed that the positive effect of barley on the oxidative beer stability was greater than the negative effect of the addition of colour malt, to adjust the colour of a 100% malt beer. In sensory comparison with beer produced with 100% malt, the beers brewed with a barley proportion up to 50% showed a slight flavour preference and up to a 75% equivalent evaluation. Copyright © 2012 The Institute of Brewing & Distilling     

A novel approach for the production of a non‐alcohol beer (≤0.5% abv) by a combination of limited fermentation and vacuum distillation

Despite the increasing demand, the production of non‐alcohol beers is still limited by unsatisfactory or artificial flavour and taste. In this study, a novel approach to producing non‐alcohol beer is presented, in which the alcohol‐reducing techniques, limited fermentation and vacuum distillation were combined. Starting from barley and wheat malts, wort with a low level of fermentable sugars was prepared by infusion mashing and lautering. Limited fermentation was carried out by Saccharomycodes ludwigii at 18°C. When the level of fermentable sugar was reduced by 25%, the fermented wort was quickly cooled from 18 to 0°C and held at that temperature for two days. The young beer was obtained after degassing and removal of yeast and was then subjected to vacuum distillation at 0.06 MPa to remove the alcohol. The concentrated extract is suitable for storage and transportation. The final product of non‐alcohol beer was obtained by dilution with deoxygenated water and carbonation with 6.0 g/L CO₂, followed by addition of 8–12% of regular beer and equilibration for 2–3 days to develop normal beer aroma. The results showed that the non‐alcohol beer had several favourable properties, including the alcohol level of <0.5% (v /v), colour 7.0 (EBC), thiobarbituric acid value of 1.05 and ratio of alcohols to esters of 1.08. Compared with other methods for the production of non‐alcohol beer, this novel approach produced a favourable alternative to regular beers with similar flavour characteristics and satisfactory stability. Copyright © 2017 The Institute of Brewing & Distilling     

Volatile compounds isolated from rice beers brewed with three medicinal plants

The volatile compounds and physicochemical properties of rice beers brewed with three medicinal plants, namely Acanthopanax senticosus (Siberian ginseng), Scutellaria baicalensis (baikal skullcap) and Cornus officinalis (Japanese cornel) were analysed. The rice beers were produced and fermented from unhulled ground rice, malt, and medicinal plant extracts. The medicinal plant extracts, used at 5 and 10 % (v/v) were blended with wort before fermentation. Compared with a draft beer fermented without rice, the rice beers had lower levels of pH, acidity, amino acid content and reducing sugars. Of the rice beers, the beer with the addition of 10% Japanese cornel had the highest colour value and foam stability. The volatile compounds of the rice beers were extracted using a solvent‐assisted flavour evaporation apparatus and analysed by gas chromatography–mass spectrometry. The rice beer with 10% Siberian ginseng showed the most diverse volatile profile, in that 54 kinds of volatile compounds were detected. The rice beer with 10% Japanese cornel had the highest relative amount of volatile chemicals of all of the rice beers. Lactones such as γ‐hexalactone, γ‐nonalactone and γ‐decalactone were detected in all of the rice beers. Copyright © 2013 The Institute of Brewing & Distilling     

The Impact of the Appearance of Beer on its Perception

The appearance of beer influences the perception of its flavour. Three separate studies were performed. Two studies using United States residents comparing beers ranked for different attributes showed that differences in colour, head and levels of lacing impacted the perception of a number of other attributes. Rankings for best to worst poured, best to worst handled, best to worst brewed, best to worst head, most to least stable foam, highest to lowest quality foam, best to worst overall flavour, best to worst overall appearance, and most to least likely to buy all showed significant differences in rankings for both colour and levels of head and lacing. A third study using Scottish participants, comparing beers differing only in levels of head and lacing complements the American findings, suggesting that the appearance of a beer greatly influences consumer perception.     

The Impact of Lightstruck and Stale Character in Beers on their Perceived Quality: A Consumer Study

The relative liking or disliking that beer drinkers have for characteristics generally regarded as off‐flavours by brewers, namely lightstruck and stale, has been explored in a consumer trial where products are presented branded and unbranded. Drinkers display a significant preference for fresh over lightstruck product, irrespective of branding. By contrast, drinkers seemed to be less clear about their liking or otherwise for stale character, although in this case they clearly prefer the branded product over the unbranded product when the beers are fresh and vice‐versa when the beer is aged. A stale version of a beer that consumers are familiar with fails to meet expectations for that product. Significant numbers of drinkers do declare a liking for lightstruck and aged character.