Effect of endoxylanases on dough properties and making performance of Chinese steamed bread

Two kinds of endoxylanase (XYL), one is a solid-phase enzyme (S-XYL) and the other a liquid-phase enzyme (L-XYL), were used to test their effect on the properties of dough and the quality of Chinese steamed bread (CSB). The textural properties of wheat dough made with the two enzymes were investigated. Parameters from the texture profile analysis (TPA) were determined after mixing the dough at 0th, 5th, 10th, 15th and 20th min, respectively. Both enzymes decreased farinograph parameters. They also influenced mixograms including decreasing time to peak and peak height. It was apparent that the decrease in hardness of the dough by adding S-XYL and L-XYL, respectively was more than that of the control sample and the sample with added yeast. It was found that the longer the time of fermentation, the lower the hardness of the dough. The mixing time was reduced by adding L-XYL by about 27.5%. The fermentation time was decreased by adding S-XYL or L-XYL. The addition of S-XYL and L-XYL on CSB resulted in increased specific volume, spread ratio and decreased crumb softness. A decreasing trend in L* value, a slightly increasing tendency in a* value and a slightly decreasing trend in b* value exist in crumb colour.     

Effect of oat β‐glucan and its oxidised derivative on the quality characteristics of sponge cake

The objective of this study was to investigate the characteristics of sponge cakes containing native oat β‐glucan (BG‐B) and its oxidised derivative with TEMPO (2, 2, 6, 6‐tetramethyl‐1‐piperidine oxoammonium ion) (Oxi‐B). BG‐B and Oxi‐B were substituted at 1% (w/w) into a formulation, and then the effects of BG‐B and Oxi‐B addition on the pasting properties of wheat flour and the physicochemical and textural properties of sponge cakes were determined. The pasting parameters of wheat flour were increased by BG‐B, whereas they were decreased in wheat flour with added Oxi‐B. The cake containing Oxi‐B had a lower volume, and a higher symmetry and uniformity than the BG‐B cake. The Oxi‐B cake exhibited smaller L* and b* values and a higher a* value than the control in crumb and crust colour. According to texture profile analysis, the BG‐B cake had increased hardness, chewiness and gumminess, whereas the Oxi‐B cake had decreased hardness.     

Effects of dietary humate supplementation to broilers on performance,slaughter, carcass and meat colour

BACKGROUND: This experiment was designed to examine the effect of dietary humate supplementation primarily on pH and colour parameters of carcasses, breast fillets and drumsticks and, secondarily on performance and carcass characteristics in broilers. RESULTS: A total of 240 male broiler chicks (Ross‐308) were randomly allocated to four dietary treatments varying in supplemental humate level (0, 0.1, 0.2 and 0.3% for H₀, H₁, H₂ and H₃). Dietary humate supplementation did not affect performance traits and slaughter, hot carcass weights and yields. Carcass‐related variables (pH, L*, a*, b*, H* and C*) were responsive to the dietary treatments. The L*, a*, b*, and C* values for drumstick muscles were higher than those for breast muscles. Except for the L* value, meat colour parameters changed due to packaging. The a* value was higher and b* value was lower for vacuum packaged breast and drumsticks than for those aerobic packaged. Storage period affected colour parameters; while L*, b*, H* and C* values were higher for drumstick skin than for drumstick meat; the a* value was greater in drumstick meat than in skin. CONCLUSION: pH and colour parameters of carcasses, breast fillets and drumsticks of broilers were improved by dietary humate supplementation. However, responses of broiler performance and slaughter and carcass characteristics were minimal. Copyright © 2008 Society of Chemical Industry     

Influence of particle characteristics and E/Z‐isomer ratio on the colour of concentrated β‐carotene dispersions

The influence of particle concentrations (0.02–0.40%), mean particle sizes (0.45–1.5 μm) and all‐E‐isomer ratios (95–30%) on the CIELAB colour coordinates (L*, a*, b*) of concentrated β‐carotene dispersions was investigated. Particle concentration between 0.06% and 0.40% had a slight impact on the colour parameters. However, with decreasing the mean particle size from 1.50 to 0.45 μm, there were increases in ΔL* = 8.0, in Δa* = 2.26 and in Δb* = 13.1. And with decreasing the all‐E‐isomers ratio from 95% to 30%, there were increases in ΔL* = 8.66, in Δb* = 17.51 but decrease in Δa* = 7.42. The experimental results were explained in terms of the scattering and absorption of light by dispersions. These findings have important implications for food industry as they offer a means to control and optimise the colour of food dispersions.     

Fortification of Wheat Bread with Agroindustry By‐Products: Statistical Methods for Sensory Preference Evaluation and Correlation with Color and Crumb Structure

The use of agroindustry by‐products (BP) for fortification of wheat bread can be an alternative to waste disposal because BP are appealing sources of dietary fiber. Moreover, it may also contribute to indirect income generation. In this study, sensory, color, and crumb structure properties of breads fortified with fiber rich fraction recovered from four types of agroindustry BP were tested, namely orange (OE), pomegranate (PE), elderberry (EE), and spent yeast (YE). Statistical models for sensory preference evaluation and correlation with color and crumb structure were developed. External preference mapping indicated consumer preferences and enabled selection of the concentrations of BP fibre‐rich fraction with best acceptance, namely 7.0% EE, 2.5% OE, 5.0% PE, and 2.5% YE. Data collected from image analysis complemented sensory profile information, whereas multivariate PLS regression provided information on the relationship between “crust color” and “crumb color” and instrumental data. Regression models developed for both sensory attributes presented good fitting (R²Y > 0.700) and predictive ability (Q² > 0.500), with low RMSE. Crust and crumb a* parameters had a positive influence on “crust color” and “crumb color” models, while crust L* and b* had a negative influence.     

Relating raw rice colour and composition to cooked rice colour

BACKGROUND: The whiter the rice, the more it is preferred by consumers and the more value it has in the market place. The first objective of this study was to determine the interrelationships of raw colour, cooked colour, amylose content and protein content in rice. The second objective was to assess whether or not the colour of cooked rice can be predicted from raw rice colour in conjunction with amylose and protein contents. RESULTS: Protein and amylose contents were not significantly correlated with the colour measurements for raw rice. Protein and amylose showed moderate, significant associations with L* and a* and a*, b* and C* respectively for cooked rice. Only the colour variable a* of cooked rice could be predicted using protein, amylose and raw rice colour with high enough precision to be useful, and this was only for modelling using samples cooked in the same manner (rice cooker). Cooking method (rice cooker versus excess water) affected the colour of cooked rice. CONCLUSION: Being able to predict a* in cooked rice is likely of limited value. Only the model that used samples where postharvest handling conditions were controlled (US‐grown rice) was able to predict C*, a more useful measure, and then with only moderate ability. L*, a measure of brightness/whiteness, was not predicted well by any of the models. Copyright © 2011 Society of Chemical Industry     

Comparison of Minolta colorimeter and machine vision system in measuring colour of irradiated Atlantic salmon

BACKGROUND: Minolta and machine vision are two different instrumental techniques used for measuring the colour of muscle food products. Between these two techniques, machine vision has many advantages, such as its ability to determine L*, a*, b* values for each pixel of a sample's image and to analyse the entire surface of a food regardless of surface uniformity and colour variation. The objective of this study was to measure the colour of irradiated Atlantic salmon fillets using a hand‐held Minolta colorimeter and a machine vision system and to compare their performance. RESULTS: The L*, a*, b* values of Atlantic salmon fillets subjected to different electron beam doses (0, 1, 1.5, 2 and 3 kGy) were measured using a Minolta CR‐200 Chroma Meter and a machine vision system. For both Minolta and machine vision the L* value increased and the a* and b* values decreased with increasing irradiation dose. However, the machine vision system showed significantly higher readings for L*, a*, b* values than the Minolta colorimeter. Because of this difference, colours that were actually measured by the two instruments were illustrated for visual comparison. Minolta readings resulted in a purplish colour based on average L*, a*, b* values, while machine vision readings resulted in an orange colour, which was expected for Atlantic salmon fillets. CONCLUSION: The Minolta colorimeter and the machine vision system were very close in reading the standard red plate with known L*, a*, b* values. Hence some caution is recommended in reporting colour values measured by Minolta, even when the ‘reference’ tiles are measured correctly. The reason for this discrepancy in colour readings for salmon is not known and needs further investigation. Copyright © 2009 Society of Chemical Industry     

Development of a colour scale for colour evaluation of beef carcasses at 60 min post mortem

The pectoralis profundus muscles of 200 selected beef carcasses were measured to develop a standard colour scale for evaluating beef carcasses at the time of classification (approximately 60 min post mortem). Five lightness (L*) values were chosen ranging from 22 to 42 with intervals of five L* units. Corresponding a* and b* values were calculated. Based on regressions between the actual reflection spectra and the L*, a* and b* values, spectra of the five chosen colours for the colour scale were predicted. The L*, a* and b* values accurately predicted the reflection spectra. A paint company imitated the five reflection spectra. Spectra could not be matched exactly, without metamerism occuring. Therefore, the colour scale should be used with specific light sources. The scale is recommended in The Netherlands to classify the colour of beef, as a supplement of SEUROP‐system for conformation and fatness. © 1999 Society of Chemical Industry     

Colour evaluation of a phycobiliprotein‐rich extract obtained from Nostoc PCC9205 in acidic solutions and yogurt

BACKGROUND: Phycobiliproteins are coloured proteins produced by cyanobacteria, which have several applications because of their colour properties. However, there is no available information about the colour stability of phycobiliproteins from Nostoc sp. in food systems. The aim of this work was to study the colour stability of a purple‐coloured phycobiliprotein‐rich extract from the cyanobacterium Nostoc PCC9205 in acidic solutions and yogurt. RESULTS: Variations of pH for Nostoc PCC9205 extract have shown stability for the L* (lightness) and a* (redness) indexes in the range 1.0–7.0. The b* index (blueness), however, increased at pH values below 4.0, indicating loss of the blue colour. The Nostoc PCC9205 extract was used as colorant in yogurt (pH 4.17) stored for 60 days. Instrumental colour analysis showed no changes for the L* and a* indexes during storage, whereas the b* index changed after 20 days of storage. A multiple comparison test showed colour instability after 20 days of storage. A hedonic scale test performed on the 60th day of storage showed acceptability of the product. CONCLUSIONS: The red component of the phycobiliprotein‐rich extract from Nostoc PCC9205 presented an improved stability in acidic media and yogurt compared with the blue component of this extract. Copyright © 2011 Society of Chemical Industry     

Influence of pH on colour and iron content of peptide fractions obtained from bovine Hb concentrate hydrolysates

The effect of pH on colour and iron content (Fe) of peptide fractions obtained from bovine haemoglobin concentrate (BHC) hydrolysates was studied. Four hydrolysates were obtained using three enzymes: Protex‐6‐L (P), Fungal–Protease–Concetrate (FC) and Flavourzyme (F). BHC and its hydrolysates (P, FC, P + F, FC + F) were fractioned at pH 4.5, 7.0 and 9.5. Solubility and Fe from different fractions were measured. Correlations between CIELAB colour parameters and Fe from different fractions were analysed. The colour from different fractions varied from red to yellow (a* and b* positives). Lightness values (L*) ranged from twenty‐four to seventy. FC4.5 and FC + F4.5 fractions were the clearest and yellow (higher L*, b*, h), while BHC9.5 and P + F9.5 fractions had the lowest values of L*, b* and h. There was an inverse linear relationship between b* and L* parameters and Fe from fractions. This relationship could be associated with the pH of extraction. As pH increases Fe significantly increases and lower b* and L* values were obtained.     

Proteolysis in dry‐aged loins manufactured with sonicated pork and inoculated with Lactobacillus casei ŁOCK 0900 probiotic strain

Selected parameters related to proteolysis were evaluated in dry‐aged loins manufactured with sonicated pork and inoculated with Lactobacillus casei ?OCK 0900 probiotic strain. Dehydration, pH, water activity and total nitrogen content were not affected by ultrasound treatment. Neither sonication nor inoculation has an influence on L* and a* colour parameters. Sonication significantly influenced the pattern of proteolysis providing higher nonprotein nitrogen content (NPN) and proteolysis index (PI). The highest intensity of proteolysis, as assessed by NPN and PI, occurred in an inoculated sample. Neither sonication nor inoculation with L. casei had a significant effect on total viable counts. Loins inoculated with L. casei had the highest lactic acid bacteria count, followed by the sonicated and nonsonicated control. This research shows that sonication followed by inoculation with L. casei ?OCK 0900 could be used as an effective measure to speed up the proteolytic changes in dry‐aged meat cuts.     

Modelling the biological variance of the yellow aspect of Granny Smith apple colour

BACKGROUND: The yellow aspect of colour is usually not considered for produce with a green‐to‐red or a green‐to‐yellow transition upon ripening. The magnitude of change is simply too small and, additionally, masked by a large variation. The colour of ‘Granny Smith’ apples, harvested from three orchards at two stages of maturity, was measured individually using the CIE L*a*b* system during storage in a regular atmosphere at three temperatures: 1, 4 and 10 °C. A model was developed based on a simplified mechanism, consisting of two consecutive reactions, to describe the development of the apple colour expressed as b* and L* values during storage. RESULTS: Monitoring individual apples made it possible to include and describe the biological variance of colour in batches of apples and to extract information on chilling injury, as a process active at 1 °C. All variations could be attributed to a single source related to the amount of yellowing compounds at the moment of harvest, indicating differences in state of maturity between individual apples. The obtained explained part (R²_adj), using nonlinear mixed effects regression analysis was well over 90% for all data combined over more than 3000 observations. CONCLUSION: Orchard location had a slight effect on the mean initial colour value, indicating differences in development stage, most probably due to differences in assessing the harvest date. The magnitude of the variation in these colour values was, however, the same for all three orchards. The behaviour of the green colour aspect (a* value) has been reported separately, as this represents the major change in perceived colour. The changes in b* and L* values are rather small, while the biological variation between the individual fruit is at least of the same magnitude. The model presented here is, as far as known, the first model on b* and L* values for green‐coloured products. Analysing b* and L* data using this model provides additional information with respect to the stage of maturity at harvest in a batch or for an orchard of Granny Smith apples. All the variation in the yellow colour aspects could be attributed exclusively to the initial level of yellow compounds. Copyright © 2010 Society of Chemical Industry     

The effect of kefir addition on microstructure parameters and physical properties of porous white bread

The effect of kefir concentration on the quality of porous white bread has been investigated. Quality evaluation was done using flatbed scanning (FBS) for measuring crumb porosity, instrumental texture profile analysis (TPA), crust and crumb color (L ^* a ^* b ^*), moisture, specific volume, and density determination techniques. The correlations between porosity, brightness, and firmness were also investigated. Long fermentation time of the sourdough changed significantly (p<0.05) the cell mean area (mm²), cell mean perimeter (mm), firmness (N), chewiness (N), light reflectance, and specific volume (ml/g). A strong correlation was found between microstructure of porous white bread, brightness (L), and firmness from TPA test. Kefir prolonged the shelf life of bread.     

Effects of gas composition in modified atmosphere packaging on the meat quality of Spanish Manchega lamb

The effects of four types of packaging atmosphere, each with a different gas composition (20–80% CO₂), on the meat quality of Spanish Manchega lamb were examined in order to suggest a gas composition for optimal preservation. Meat quality was assessed by pH, colour (L*,a* and b* values), water‐holding capacity (WHC), cooking loss (CL) and shear force (SF). Gas composition affected all parameters except L* and SF. The pH values decreased significantly in samples packed with 80% CO₂ but remained constant in the other groups. The b* values were lower in samples packed without O₂ than in the other groups and increased with time. However, the a* values decreased in all groups with time. Samples packed in low‐CO₂ atmosphere tended to lose more water (ie to have less WHC and show more CL). The SF values decreased with time, and similar values of this parameter were observed for all treatments. © 2001 Society of Chemical Industry     

Effect of gamma irradiation on the physico‐chemical and sensory properties of raw shelled peanuts (Arachis hypogaea L.) and pistachio nuts (Pistacia vera L.)

Backround The present study evaluated the quality of raw peanuts and pistachio nuts as a function of irradiation dose in order to determine dose levels causing minimal undesirable changes to these products. Physico‐chemical (colour, peroxide value, hexanal content, fatty acid composition, volatile compounds) and sensory (colour, texture, odour, taste) properties of raw peanuts and pistachio nuts were determined after irradiation at doses up to 7 kGy. Results Results showed an eight‐ and seven‐fold increase in peroxide value and a twelve and five‐fold increase in hexanal content after irradiation at a dose of 7 kGy for peanuts and pistachio nuts, respectively. An increase was also observed in saturated fatty acids (20.51–28.28% and 15.24–24.87%) with a parallel decrease in unsaturated fatty acids (79.49–71.72% and 84.76–75.13%) for peanuts and pistachio nuts, respectively. Likewise, volatile compounds such as aldehydes, alkanes, ketones and alcohols comprising secondary oxidation products of peanut and pistachio nut lipids increased after irradiation. Pistachio nut colour parameter a* and to a lesser extent parameters, L* and b* decreased after irradiation leading to a slight but noticeable darkening in product colour while colour parameter L*, b* and a* of raw peanut remained unchanged by irradiation up to 7 kGy. Conclusion Based on sensory evaluation, peanuts and pistachio nuts become unacceptable for consumption when irradiated at doses higher than 3 kGy. Copyright © 2009 Society of Chemical Industry     

CIELAB coordinates in response to berry skin anthocyanins and their composition in Vitis

Abstract: Berry skin color OIV index, anthocyanin composition, and content of 78 grape cultivars were surveyed using a CIELAB system and high‐performance liquid chromatography (HPLC)‐mass spectrometry (MS) coupled with photodiode array detection. There were high correlations between L*, b*, and color, while a* was not a representative parameter. L* and b* values declined as berry skin color OIV became darker, and a* increased as berry skin color OIV became darker in pink and red grape cultivars only. The composition and content of anthocyanins varied widely among the cultivars. Total anthocyanins and types of anthocyanins were significantly correlated with color OIV parameters. Through multiple linear regression analysis, cyanidin derivatives had a positive effect on values of L* and b*. Delphinidin derivatives had positive effects on the value of a*. The CIELAB system gave good results for differentiation of grape berry skin color OIV.     

Physical,functional and pasting properties of different maize (Zea mays) cultivars as modified by an increase in γ‐irradiation doses

Physical, functional and pasting properties of six maize (Zea mays) cultivars as modified by an increase in γ‐irradiation doses were investigated. From the L*, a* and b* measured, deltachroma, colour intensity and hue angle were calculated. Functional and physicochemical properties of maize flours were determined using standard methods and Rapid Visco Analyser, respectively. Often, the effect of γ‐irradiation on L*, a* and b* values within each cultivar was almost never significant but pronounced between the yellow and white cultivars. Generally, deltachroma, colour intensity and hue angle decreased with increased γ‐irradiation dose. Mean seed bulk density and 100 kernel weight varied from 0.73–0.77 g cm^?3 and 23.13–35.42 g, respectively. Loose and packed bulk densities, and water (WAC) and oil absorption capacities of the maize flours were not significantly affected by γ‐irradiation. WAC of nonirradiated and γ‐irradiated maize flours ranged from 1.54–1.62 and 1.09–1.70 g g^?1, respectively. Peak, trough, breakdown, final and setback viscosities decreased significantly (P < 0.05) with increased γ‐irradiation dose.     

Comparative effect of red yeast rice (Monascus purpureus), red beet root (Beta vulgaris) and betanin (E‐162) on colour and consumer acceptability of fresh pork sausages packaged in a modified atmosphere

Fresh pork sausages containing natural colorants, red yeast rice powder (Monascus purpureus; Frame^®) or a crude red beet root (Beta vulgaris) juice or commercial betanin (E‐162), at different concentrations, were packaged in an atmosphere containing 80% O₂ and 20% CO₂ and stored in the dark for 20 days. The following parameters were measured at 4 day intervals: instrumental colour (CIE L*, a*, b*, a*/b*, C* and h*), reflectance spectra, sensory discoloration (trained panel) and acceptability and willingness to purchase (habitual and non‐habitual consumer panels) under two different lighting displays (standard fluorescent and Promolux^® lamp). The use of colorants improved the colour properties of fresh pork sausages. Sausages with red yeast rice, red beet root juice and betanin had lower L* and h* and higher a* and a*/b* values than control samples. The colour properties of sausages with red beet root were the closest to control sausages, while sausages with red yeast rice had significantly lower b* values. Both natural colorants and betanin protected sausages from discoloration and extended acceptability and willingness to purchase by about 4 days, according to evaluation by habitual consumers under two different types of lighting display. Therefore, red beet root juice may be envisaged as the most suitable natural colorant for use in fresh pork sausages. Copyright © 2005 Society of Chemical Industry     

Possibilities of enhancing the colour of egg yolk

BACKGROUND: This study attempts to compare two possibilities of enhancing the colour of egg yolk. One of them is based on the ecological rearing of laying hens on natural green grass whereas the other uses a feeding dose supplemented with natural pigments in laying hens reared in individual cages. Is it possible to distinguish these two technologies using yolk colour determination in the CIELAB system? RESULTS: Yolk colour parameters such as L*, a*, and b* in the group of grazed hens are significantly different (α = 0.001) from those observed in hens reared in cages. The yolk colour shows a darker, redder and more yellow colour. The greatest difference was seen in the red colour parameter, a*, that increased more than twice. Visually, this means a shift towards a more orange colour. Compared to grazing in the meadow (ΔE* = 13.257), the addition of artificial pigments in the feed resulted in a more significant increase in the parameter ΔE* (CIE total colour difference), with the greatest value of ΔE* being observed with the use of both pigments (ΔE* = 24.265). CONCLUSION: Grazing increases the parameter a* whereas the values of the parameter C*_ab remain relatively low. The parameter ΔE* is significantly lower in the case of grazing as compared to the supplementation of the feed with pigments. However, colourity parameters cannot be used as a specific standard to identify a particular grazing technology as their values vary during the laying period. Copyright © 2011 Society of Chemical Industry     

Changes of colour and pH in fish musculature after ionizing radiation exposure

Irradiation of meat causes sensory changes as do other technological methods. The most significant sensory and quality indicator of meat is colour; therefore, the effect of irradiated pieces of fish was studied in relation to colour changes. Colour was measured at the musculature of Oncorhynchus mykiss. The parameters of colour, L*, a* and b*, were determined with the portable Superchroma S-Spex (Braive) spectrophotometer in the CIELAB system before irradiation (3 h post mortem) and after irradiation (⁶⁰Co source, a dose of 3 kGy and a dose rate of 3.33 kGy h^–1) (5 h post mortem). The change of L* was identical for both irradiated and nonirradiated samples. This change may be caused by maturation of fish flesh. a* was identical and b* decreased. This effect differs from that of irradiated pork. The decrease of the pH was identical for both irradiated and nonirradiated samples. This change may be caused by maturation of fish flesh.