苯乙烯改性快干树脂漆的研制

介绍了苯乙烯改性快干醇酸树脂的合成机理，着重叙述了快干树脂的合成工艺及中控质量指标，最后介绍了快干漆的配方及性能。     

气压瓶盖注射模具设计

分析了气压瓶盖的结构及工艺特点，介绍了瓶盖注射模具的结构和工作过程，并详细介绍了模具浇注系统，凸凹模及侧向分型与抽芯机构的设计。     

冷箱及膨胀机试车运行情况分析

介绍中海化学二期装置原始开车以来，冷箱、膨胀机试车及运转情况，并介绍针对存在的一些问题，进行了调整及采取的改造措施。     

维通氟橡胶的进展

本文介绍了维通氟橡胶的性能，类型，硫化体系及命名方法的进展，简要介绍了其各牌号的特点及应用。     

裂解炉技术改造与节能（二）

对裂解炉技术改造的目的、方向、方案制定及部分改造实例作了介绍，为裂解炉技术改造方案的选定提供了借鉴。同时，文中阐述了裂解炉节能操作的重要性，介绍了裂解炉节能的原理、途径及发展，为裂解炉的设计及操作提供了可供参考的意见。     

发展中的触变型光纤松套填充料

详细介绍了触变型光纤松套填充料的触变原理，保护光纤机理及技术特性，并对其应用及市场情况进行了介绍，预测了该产品的应用及发展方向。     

新型无机抗菌剂的研究现状和展望

介绍了无机抗菌剂的国内外发展现状，评述了各种无机抗菌剂的结构特点及抗菌机理，介绍了无机抗菌剂在陶瓷、塑料、纤维等方面的应用，同时探讨了无机抗菌剂存在的问题及发展趋势。     

超临界流体技术在微孔发泡聚合物制备中的应用

介绍了超临界流体技术和微孔聚合物的概念及优点。着重介绍了超临界流体技术在微孔聚合物制备中的应用及发展状况，并简单介绍了制备微孔聚合物的影响因素，最后阐述了对超临界流体技术的展望和建议。     

铁系磷化技术及应用

本作论述了铁系磷化的机理，特点及工艺，介绍了国外在铁系磷化方面的研究进展，讨论了促进剂及金属离子对铁系磷化膜耐蚀性的影响，介绍了国内外新开发的取代铁系磷化的锆盐处理工艺，还介绍了一种新开发的耐蚀铁系磷化液。     

塑料涂装

从塑料结构入手，介绍了塑料涂装的特点、塑料用涂料的性能要求及涂料的选择，介绍了塑料制品涂装前的表面处理及涂装工艺设计。     

乙烯酮(双乙烯酮)下游产品废水的治理技术

乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。     

Semi-empirical equation of state of metals. Equation of state of aluminum

A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO₂) of density 0.08 g/cm³. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008.     

水泥水化热测定方法综述

水泥水化热是中、低热水泥和核电工程用水泥的一项关键的技术指标。全球范围内测定水泥水化热的方法有溶解法、直接法/半绝热法、等温传导量热法三种。本文总结了中、美、欧相关方法标准,对其测试原理、仪器设备、试验过程等方面进行了比对,并对其在领域的应用做了简单的概括。     

几种乙炔加压设备性能的比较

阐述并比较了几种加压设备在乙炔加压清净过程中的性能和特点。     

三种煤样燃烧热的测定

本文通过三个厂家提供的三种煤样燃烧热的测定,由测定结果综合得出3号煤样燃烧最完全、燃烧热也最大,是三个煤样中最好的一种。     

Calorimetric and Computational Study of Enthalpy of Formation of Diperoxide of Cyclohexanone

A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out.     

小议汽车涂装工艺设计对涂装成本的影响

论述了涂装工艺设计对涂装设备投资、涂装生产成本的影响。     

气化给煤系统故障分析

气化给煤装置自投运以来,出现了气化煤仓堵煤、称重给煤机输送皮带因跑偏而损伤以及清扫装置故障频繁等问题,多次造成气化系统减负荷运行。通过对出现的各种问题进行分析,找到了产生这些问题的原因,并有针对性地采用配煤和改进清扫链等措施,使出现的问题得到了极大的改善。     

Measurement of the gradient of viscosity with composition of mixtures of non-ideal gases

A perturbation viscometer is a differential capillary viscometer that measures the logarithmic viscosity gradient of the viscosity-composition curve for gas mixtures. Measurements are made at different gas mixture compositions. Integration of the logarithmic viscosity gradients measured over the full composition range gives the mixture viscosity relative to the viscosity of one of the pure components of the gas mixture. This method is attractive because, for measurements of equal precision, integration of the gradients is potentially an order of magnitude more precise than measurement of the viscosities directly. It can also work at high and low temperatures and perhaps high pressures.The perturbation viscometer has been used to make measurements on ideal gas mixtures at ambient and elevated temperatures. The situation is more complicated when the gas mixtures are non-ideal. Extra effects due to density differences, molar volume change on mixing and differential thermal expansion may be measured in addition to the desired viscosity change producing systematic errors in the results. Thus, a more sophisticated apparatus is required. The standard perturbation viscometer has been modified to separate out the extra effects to permit measurement of the true change in viscosity. In addition, the theoretical operation of the modified apparatus has been revised to account for the design changes to permit calculation of the viscosity-composition profiles from the results.The apparatus has been tested using helium-HFC-125 mixtures and two new viscosity-composition profiles are presented for these mixtures at 23 and . Internal consistency tests have been used to confirm that the data produced are of high quality with an estimated uncertainty in the viscosity ratio data at of 0.9% and at of 1.5%.     

醋酸纤维素取代基分布与性质的关系

分析了以吡啶为溶剂的醋酸纤维素的13C-NMR核磁共振谱,得出了三种不同位置羟基的取代度。结合X—射线和DSC分析,初步说明具有相同取代度但未经水解和经过水解的醋酸纤维素(CA) 性质上的差异是由于三个羟基上的取代度分布不同及消晶程度差异所致。