Chiral surfactants in micellar electrokinetic capillary chromatography

Most biologically active molecules contain one or more chiral centres, giving rise to stereoisomeric forms which can behave differently in a chiral environment. Thus, only one of the enantiomers may show the desired physiological activity, whereas the other enantiomers may either be considerably less active or even show undesireable side effects. Establishing that a chiral drug consists of one single enantiomer is nowadays essential before it can be given to patients. Analytical tools that can discriminate between enantiomers play a very important role in determining the stereoisomeric composition of chiral molecules. Until recently chromatographic techniques were the most popular for enantiomeric separations. The increased use of capillary electrophoresis (CE) has provided complementary methodology for chiral discrimination. One mode of CE that has been used for this purpose is micellar electrokinetic capillary chromatography (MECC), where natural or synthetic chiral surfactants are added to the separation buffer.     

Separation of five antipyretic analgesics by micellar electrokinetic capillary chromatography

The derivatives of antipyrine and phenylbutazone are important antipyretic analgesics commonly used in clinical medicine. Although high performance liquid chromatography has been the conventional method used for the analysis of these drugs, in recent years capillary electrophoresis was validated to be a useful method in the analysis of antipyretic analgesics. However, there has been no report on the separation of antipyrine (AP), 4-aminoantipyrine (4-AAP), aminopyrine (APY), dipyrone (DIP) and phenylbutazone (PHE) in the literature. In this paper, a micellar electrokinetic capillary chromatographic (MECC) separation method was described for the five antipyretic analgesics.     

Separation of reduced and oxidized glutathione by micellar electrokinetic capillary chromatography

The separation of reduced and oxidized glutathione at an absolute sensitivity of about 100 pg by micellar electrokinetic capillary chromatography without derivatization is described. The time required for the separation is less than 10 min (the time between two following injections is about 15 min). The separation is characterized by high efficiency and good reliability. A partition mechanism is responsible for the high resolution observed. The method was utilized for the analysis of commercial preparations of glutathione and a good agreement with the expected results was obtained; the oxidation of the commercial glutathione in solution was easily analysed.     

Quantitative analysis of synthetic dyes in lipstick by micellar electrokinetic capillary chromatography

The separation of synthetic dyes, used as color additives in cosmetics, by micellar electrokinetic capillary chromatography (MEKC) is described in this study. The separation of seven dyes, namely eosine, erythrosine, cyanosine, rhodamine B, orange II, chromotrope FB and tartrazine has been achieved in about 3 min in an untreated fused silica capillary containing as background electrolyte a 25 mM tetraborate/phosphate buffer, pH 8.0, and 30 mM sodium dodecyl sulfate. The electrophoretic method exhibits precision and relatively high sensitivity. A detection limit (LOD, signal/noise = 3) in the range of 5-7.5 X 10(-7) M of standard compounds was recorded. Intra-day repeatability of all the studied dye determinations (8 runs) gave the following results (limit values), % standard deviation: 0.24-1.54% for migration time, 0.99-1.24% for corrected peak areas, 0.99-1.24% for corrected peak area ratio (analyte/internal standard) and 1.56-2.74% for peak areas. The optimized method was successfully applied to the analysis of a lipstick sample where eosine and cyanosine were present.     

Analysis of cefadroxil by micellar electrokinetic capillary chromatography: development and validation

A method is developed and validated for analysis of the antibiotic cefadroxil using micellar electrokinetic capillary chromatography. It permits cefadroxil to be completely separated from ten of its known related substances within 15 min (including the washing procedure). The separation is performed in an acetate buffer (50 mM, pH 5.25) containing sodium dodecyl sulfate (SDS; 110 mM). The fused-silica capillary was 44 cm long (36 cm effective length), 50 microm ID; the voltage, 18 kV; temperature, 15 degrees C; and the detection wavelength; 254 nm. The influence of the type of buffer, buffer pH and concentration, and of the SDS concentration was investigated. The robustness of the method was examined by means of a full-fraction factorial design. The parameters for validation such as linearity, precision, limit of detection and limit of quantitation are also reported.     

The separation and determination of quinine in bitter drinks by micellar electrokinetic capillary chromatography

OBJECTIVE: To study fetal erythroblasts (FE) from maternal peripheral blood for the diagnosis of fetal aneuploidies. METHODS: FE expressing the glycophorin A(GPA) were isolated from 13 pregnant women with male fetus (8-14 w) by fluorescence-activated cell sorting(FACS), FE were identified by oligonucleotide primed in situ labelling (PRINS) with Y centromeric satellite DNA primer. The concentration of pregnancy-associated plasma protein A (PAPP-A) was measured by enzyme-labelled immunosorbent assay (ELISA) in serum samples of 41 normal pregnant women (8-14 w). In 5 pregnant women suspicious of fetal Down's syndrome (10-13 w) the serum and FE were examined by PAPP-A, GPA/FACS and PRINS with 21 chromosome centrometric primer. RESULTS: Detection of flow sorted FE from 13 pregnant women by Y primer showed 14.5% of GPA positive signal. There was no difference in serum level of PAPP-A between 5 pregnant women and 41 normal controls, and all GPA positive cell nuclei of the 5 cases displayed two signals with 21 chromosome. CONCLUSION: Measurement of fetal erythroblasts from maternal blood for the diagnosis of genetic fetal aneuploidies is a promising non-invasive, rapid and reliable technique.     

Separation of cardiac glycosides by micellar electrokinetic chromatography and microemulsion electrokinetic chromatography

The interest of micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC) for the resolution of four cardiac glycosides is demonstrated. First, the influence of some parameters on the resolution of the solutes in MEKC such as the concentration of the surfactant, pH, addition of organic modifiers and urea is discussed. Then, results are compared with those obtained in MEEKC using different microemulsion compositions. Results indicate that MEEKC possesses several advantages over MEKC for the separation of relatively hydrophobic compounds such as digitalic compounds. First, microemulsions allow a better manipulation of the migration time window and of the retention of the solutes. Moreover, efficiency is improved with shorter analysis time.     

Application of micellar electrokinetic capillary chromatography to the analysis of illicit drug seizures

The application of micellar electrokinetic capillary chromatography (MECC) to the analysis of illicit drug seizures is presented. Areas investigated include general screening and qualitative and, in some instances, quantitative analysis of various drugs, including heroin, opium, cocaine, amphetamines, LSD and anabolic steroids. Due to its high efficiency, high selectivity and general applicability, MECC is well suited for forensic drug analyses.     

Strategies for the monitoring of drugs in body fluids by micellar electrokinetic capillary chromatography

Electrokinetic capillary techniques can exploit numerous separation principles, making them flexible and easily applicable to a variety of separation problems. In recent publications, this emerging technology has been shown to be well suited for monitoring drugs and metabolites in body fluids, including serum, saliva and urine. Most attention has been focused on micellar electrokinetic capillary chromatography (MECC) because it permits the separation and determination of drugs with discrimination being largely based on differences in hydrophobicity. An overview of literature data on the MECC of drugs in body fluids and recent data obtained with antiepileptics in serum and saliva, with model mixtures of illicit drugs, and with extracts from urine specimens that tested positively for opiates and cocaine metabolites are presented. Emphasis is focused on buffer selection and simple sample preparation procedures, including direct injection of body fluids, ultrafiltration and solid-phase extraction.     

pH-dependent isoform transitions of a monoclonal antibody monitored by micellar electrokinetic capillary chromatography

Within the pH range 2-12, the monoclonal chimeric antibody BR96 can be separated into one to five isoforms by micellar electrokinetic capillary chromatography (MECC). The distribution of the immunoglobulin between these isoforms is pH dependent and apparently reversible. Some of the changes in the electrophoretic profile are represented by alterations in the immunoglobulin secondary structure. MECC and CD data demonstrate that, in other cases, differences in electrophoretic mobilities of the intact and acid-stressed antibody molecules were not due to differences in the ionization of the protein functional groups or changes in secondary structure, but rather resulted from differences in the exposure of the molecule's structural elements to the solvent. The results indicate that the interaction of the isoforms with sodium dodecyl sulfate micelles plays a crucial role in MECC isoform separations. The formation of analyte-micelle complexes was postulated to make electrophoretic mobilities, especially of large protein molecules, susceptible to subtle conformational changes that are not detectable by other methods.     

Application of micellar electrokinetic capillary chromatography for the determination of benzoic acid and its esters in liquid formula medicines as preservatives

We described a method for the simultaneous determination of preservatives including benzoic acid, methyl-, ethyl- and propyl-benzoate by micellar electrokinetic capillary chromatography (MECC). The factors affecting the reproducibility in the quantitative analysis of pharmaceuticals by MECC were investigated by varying the running buffer and washing condition in-between runs. Preservatives in liquid formula medicines have been determined by optimum MECC condition using p-hydroxy benzoic acid as an internal standard. The reproducibility of this method was acceptable as a validate method for the quality control of pharmaceuticals (RSD < 2%). Routine quantitative analysis of pharmaceuticals using MECC could be possible with well characterized reproducible procedure.     

Separation and determination of anthraquinone derivatives in rhubarb and its preparations by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatographic method was set up for the quality control of rhubarb and its preparations. Anthraquinone derivatives were separated successfully within 10 min in the buffer solution of 50 mmol/L H3BO3-NaOH (pH 11) containing 25 mmol/L sodium deoxycholate. The established method, with a recovery of extraction of over 90%, has good linear relationship and reproducibility. The contents of anthraquinone derivatives in rhubarb and a tablet of Niu-huang-jie-du differed significantly, showing that the quality control of rhubarb and its preparations is necessary.     

Stacking of neutral analytes in micellar electrokinetic chromatography

On-line concentration techniques for neutral analytes by sample stacking in micellar electrokinetic chromatography are reviewed. Discussions regarding the fundamentals and practical applications are conveyed. A high gain in sensitivity of 10- to more than 100-fold using normal capillary cell dimension is provided without crucial loss of resolution by the techniques. More than 1000-fold gain in sensitivity (lowering limits of detection to the nM range) is obtained together with an extended pathlength cell.     

Optimization of selectivity and resolution in micellar electrokinetic capillary chromatography with a mixed micellar system of sodium dodecyl sulfate and sodium cholate

Selectivity and resolution were studied for the separation of seven corticosteroids by micellar electrokinetic capillary chromatography (MEKC) using a mixed micellar solution of sodium dodecyl sulfate (SDS) and sodium cholate (SC), buffered with 3-(N-morpholino)propanesulfonic acid (MOPS) or 3-[(1,1-dimethyl-2-hydroxyethyl)amino]-2-hydroxypropane sulfonic acid (AMPSO). The changes in selectivity were compared for the AMPSO-SDS-SC system by varying the pH and the concentrations of AMPSO, SDS and SC. The experimental design started with the central composite design and continued in a sequential manner. The optimum selectivity for the separation of the corticosteroids was calculated from the analyte migration times and the analyte velocities, by using empirical quadratic regression models. Satisfactory regression fits and coefficients of determination for prediction were obtained with cross-validated models. To optimize the resolution, the physical parameters of capillary length and analysis time were varied under the conditions optimal for the selectivity. In both the selectivity and the resolution, optimization the overall optimum was determined by using the desirability function technique. Analysis times were controlled by using 1,3-diaminopropane to influence the electroosmotic flow velocity (veo). The voltage was kept constant, which resulted in higher electric field strength in shorter capillaries. No changes in the selectivity were observed when 1,3-diaminopropane was used to control the electroosmotic flow velocity. Such an optimization technique, where the chemical and physical factors affecting the separation are treated independently, seemed to be effective for finding the best possible resolution for the corticosteroids.     

Characterization of interactions between bile salts and drugs by micellar electrokinetic capillary chromatography. Part I

PURPOSE: The general properties of micellar electrokinetic capillary chromatography (MECC) were utilized to characterize the strength of interactions between bile salts and biological active substances. METHODS: For that purpose various bile salts were used as micellar pseudostationary phase in the background electrolyte. Furthermore, a physicochemical model was applied and the effective partition coefficients between micellar and water phase were calculated in order to evaluate the strength of interactions between bile acids and the drugs. RESULTS: It was found that the interactions between the selected drugs and bile salts depend both on the lipohilicity of the drugs and on the charge of the components. Only hydrophobic, cationic drugs such as quinine and propranolol are able to interact with these surface active agents. CONCLUSIONS: MECC is a valuable method to characterize interactions such occurring between drugs and bile salts.     

Analysis of the transformation of nitroaromatic compounds in wastewater by bacteria using micellar electrokinetic capillary chromatography

A rapid micellar electrokinetic capillary chromatographic method is described for the analysis of nitroaromatic and nitramine explosives using sodium dodecyl sulfate-borate buffer with application to analyze specifically the biodegradation products of trinitrotoluene. The method is fast, in expensive, offers better resolution, and saves on the consumption of organic solvents used in a comparable reversed-phase HPLC method.     

Determination of 5-aminolaevulinic acid dehydratase activity in erythrocytes and porphobilinogen in urine by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatographic (MECC) method has been developed and optimised for the separation of 5-aminolaevulinic acid (ALA) and porphobilinogen (PBG). The running buffer consisted of a mixture of 20 mM sodium phosphate and 20 mM sodium borate containing 50 mM sodium dodecyl sulphate (SDS) adjusted to pH 9.5 with 1 M NaOH. The running voltage and temperature were 20-25 kV and 30 degrees C, respectively. The MECC method for the analysis of PBG is fast and simple and is useful for the screening of PBG in the urine of patients suspected to have acute intermittent porphyria (AIP), and for the confirmation of lead exposure by measuring red-cell ALA-dehydratase (ALA-D) activity with ALA as the enzyme substrate.     

Evaluation of capillary zone electrophoresis and micellar electrokinetic capillary chromatography with direct injection of plasma for the determination of cefotaxime and its metabolite

Quantitative aspects of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MECC) were investigated for the determination of cefotaxime (C) and its deacetyl metabolite (DA) in human plasma in a concentration range of therapeutic interest. For CZE, plasma samples spiked with C and DA were injected after deproteinization with acetonitrile, and analytes were separated in a fused silica capillary using a borate buffer at pH 9.2 as electrolyte; no suitable internal standard was found. For MECC, plasma samples spiked with C, DA, and theobromine as internal standard were directly injected after dilution with water and analyzed using a phosphate buffer, pH 8.00, containing 165 mM SDS as separation electrolyte and a fused silica capillary. Both methods gave satisfactory interday precision with respect to migration times (RSD < 1%) and gave linear responses over the concentration ranges investigated (5-100 mg L-1 C and 5-20 mg L-1 DA). For CZE, intraday RSD (n = 4 graphs) between the slopes of the calibration graphs was acceptable (5.7%) for C. The corresponding figures for interday precision (n = 4 days) were fair (16.1%) in comparison to those obtained with MECC, for which the RSD was 1.49% when theobromine was used as internal standard. A satisfactory interday precision between slopes was also obtained with MECC even without the use of an internal standard (RSD = 4.38%), which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 2 mg L-1 (CZE) and 1 mg L-1 in plasma (MECC) for C and DA. MECC was shown to be superior with regard to simplicity, rapidity, precision, and sensitivity.     

On-line coupling of micellar electrokinetic chromatography to electrospray mass spectrometry

The possibility of selectivity enhancement in capillary electrophoresis-mass spectrometry (CE-MS) by hyphenating micellar electrokinetic chromatography (MEKC) and electrospray mass spectrometry (MS) is described for two quaternary ammonium compounds. Direct coupling of MEKC to MS is hazardous because of the contamination of the ion source due to presence of an excess of micelle forming agent in the MEKC buffer. Therefore, a coupled-capillary setup with the possibilities of voltage switching and buffer renewal has been designed. Such a system allows on-line heartcutting of the zones of interest in the MEKC capillary with subsequent transfer via a second capillary to the mass spectrometer.     

Characterization of partitioning behavior of cephalosporins using microemulsion and micellar electrokinetic chromatography

Electrokinetic chromatography (EKC) was introduced to determine the partitioning behavior of various cephalosporins (cefpim, cefpirom, cefaloridin, cefaclor, cephalexin, cefuroxim, cefotaxim) in microemulsions (ME) and micellar (MC) systems. The partitioning behavior of cephalosporins in microemulsions was characterized calculating the capacity factor. The required parameters for the determination of the capacity factor (micro(aq) and micro-me are the electrophoretic mobilities of the solutes in the aqueous phase and the microemulsion phase, micro(eff) is the effective mobility in the microemulsion solution) were measured by EKC using cationic and anionic microemulsion systems consisting of the surfactants/n-heptane/1-butanol/10 mM phosphate buffer solution, pH 7.0. Electrokinetic chromatography was shown to be a useful method to quantify the partitioning behavior of drugs in oil/water microemulsion. The logarithm of the capacity factor was correlated with the logarithm of the 1-octanol/water partitioning coefficients.