Electronic transport properties of Ni-doped CoSb<Subscript>3</Subscript> prepared by encapsulated induction melting

Ni-doped CoSb₃ skutterudites were prepared by encapsulated induction melting and their thermoelectric and electronic transport properties were investigated. The negative signs of Seebeck and Hal coefficients for all Ni-doped specimens revealed that Ni atoms successfully acted as n-type dopants by substituting Co atoms. The carrier concentration increased as the Ni doping content increased, and the Ni dopants could generate excess electrons. However, the carrier mobility decreased as the doping content increased, which indicates that the electron mean free path was reduced by the impurity scattering. The Seebeck coefficient and the electrical resistivity decreased as the carrier concentration increased, as the increase in carrier concentration by doping overcame the decrease in the carrier mobility by impurity scattering. The Seebeck coefficient showed a negative value at all temperatures examined and increased as the temperature increased. The temperature dependence of electrical resistivity suggested that Co_1−xNi_xSb₃ is a highly degenerate semiconducting material. Thermal conductivity was considerably reduced by Ni doping, and the lattice contribution was dominant in the Ni-doped CoSb₃.     

Transport properties on Sn-filled and Te-doped CoSb<Subscript>3</Subscript> skutterudites

Sn-filled and Te-doped CoSb₃ skutterudites (Sn_xCo₈Sb_23.25Te_0.75) were synthesized by the encapsulated induction melting process. Single δ-phase was successfully obtained by subsequent heat treatment at 823 K for 6 days. Structural characterizations were carried out through X-ray diffraction studies. Transport properties such as the Seebeck coefficient, electrical resistivity, thermal conductivity, carrier concentration and mobility were measured and analyzed. The unfilled Co₈Sb_23.25Te_0.75 sample showed n-type conductivity from 300 K to 700K. However, the Sn-filled Sn_xCo₈Sb_23.25Te_0.75 showed n-type conductivity for z=0.25 and 0.5, and p-type conductivity for z=1.0 and 1.5 from 300 K to 700 K. Thermal conductivity was reduced by the impurity-phonon scattering. The dimensionless figure of merit (ZT) was remarkably improved over that of untreated CoSb₃. However, the ZT value decreased when filling with z≥1.0 because the conductivity type was changed from n-type to p-type, thereby allowing bipolar conduction. The details are discussed in terms of the two-band model and the bipolar thermoelectric effect.     

Effects of dopant content on optical and electrical properties of In<Subscript>2</Subscript>O<Subscript>3</Subscript>: W transparent conductive films

The In2O3:W (IWO) films with different W content were deposited on glass substrate using direct current sputtering method. The structure, surface morphology, and optical and electrical properties were investigated. Results showed that both the carrier concentration and carrier mobility were increased with the doping of W. The IWO film with the lowest resistivity of 1. 0× 10-3 Ω· cm, highest carrier mobility of 43. 7 cm2. W-1. s-1 and carrier concentration of 1. 4× 1020 cm-3 was obtained at the content of 2. 8 wt. ％. The average optical transmittance from 300 nm to 900 nm reached 87. 6％.     

Cr doping effect in B-site of La<Subscript>0.75</Subscript>Sr<Subscript>0.25</Subscript>MnO<Subscript>3</Subscript> on its phase stability and performance as an SOFC anode

La_0.75Sr_0.25Cr _y Mn_1−y O₃ (LSCM) (y = 0.0–0.6) composite oxides were synthesized by a complexing process of combining ethylene diamine tetraacetic acid (EDTA) and citrate. X-ray diffraction (XRD), temperature-programmed reduction, electrical conductivity, I–V polarization, and impedance spectroscopy were conducted to investigate the Cr doping effect of La_0.75Sr_0.25MnO₃ on its phase stability and electrochemical performance as a solid-oxide fuel cell (SOFC) anode. The chemical and structural stabilities of the oxides increased steadily with increasing Cr doping concentration, while the electrical conductivity decreased on the contrary. At y ≥ 0.4, the basic perovskite structure under the anode operating condition was sustained. a cell with 0.5-mm-thick scandia-stabilized zirconia electrolyte and La_0.75Sr_0.25Cr _y Mn_1−y O₃ anode delivered a power density of ∼15 mW·cm⁻² at 850°C.     

Thermoelectric properties of n-type Bi<Subscript>2</Subscript>Te<Subscript>2.7</Subscript>Se<Subscript>0.3</Subscript> compounds prepared by spark plasma sintering

In this study, the thermoelectric properties of 0.1 wt.% Cdl₂-doped n-type Bi₂Te_2.7Sb_0.3 compounds, fabrieated by SPS in a temperature range of 250°C to 350°C, were characterized. The density of the compounds was increased to approximately 100% of the theoretical density by carrying out consolidation at 350°C. The Seebeck coefficient, thermal conductivity, and electrical resistivity were dependent on a hydrogen reduction process and the sintering temperature. The Seebeck coefficient and the electrical resistivity increased with the reduction process. Also, electrical resistivity decreased and thermal conductivity increased with sintering temperature. The results suggest that carrier density and mobility vary according to the reduction process and sintering temperature. The highest figure of merit, 1.93×10⁻³ K⁻¹, was obtained for the compound consolidated at 350°C for 2 min.     

Effects of Sc doping on electrical conductivity of BaZrO<Subscript>3</Subscript> protonic conductors

BaZr1-xScxO3-0.5x (x=0.07,0.10,0.13,0.16) powders were prepared by solid-state reaction method,and ZnO was used as sintering aid.Samples with different amount of ZnO additive were sintered at 1450 ℃ for 6 h in air.Single cubic perovskite phase proton conductors were obtained.Conductivity was measured by electrochemical workstation.It was shown that Sc doping could increase conductivity through enhancing the carrier concentration in the material,but excessive Sc content might decrease the carrier concentration because of its charge compensation.ZnO had an influence on carrier concentration and mobility and affected the electrical conductivity.2 mol％ ZnO and 13 mol％ ScO1.5 doped sample showed the highest DC conductivity of 3.6 × 10-3 S·cm-1 tested at 800 ℃ in wet hydrogen atmosphere.     

Thermoelectric Properties of Cu-doped Bi<Subscript>2−x</Subscript>Sb<Subscript>x</Subscript>Te<Subscript>3</Subscript> Prepared by Encapsulated Melting and Hot Pressing

P-type Bi_2?xSb_xTe₃:Cu_m (x = 1.5–1.7 and m = 0.002–0.003) solid solutions were synthesized using encapsulated melting and were consolidated using hot pressing. The effects of Sb substitution and Cu doping on the charge transport and thermoelectric properties were examined. The lattice constants decreased with increasing Sb and Cu contents. As the amount of Sb substitution and Cu doping was increased, the electrical conductivity increased, and the Seebeck coefficient decreased owing to the increase in the carrier concentration. All specimens exhibited degenerate semiconductor characteristics and positive Hall and Seebeck coefficients, indicating p-type conduction. The increased Sb substitution caused a shift in the onset temperature of the intrinsic transition and bipolar conduction to higher temperatures. The electronic thermal conductivity increased with increasing Sb and Cu contents owing to the increase in the carrier concentration, while the lattice thermal conductivity slightly decreased due to alloy scattering. A maximum figure of merit, ZT_max = 1.25, was achieved at 373 K for Bi_0.4Sb_1.6Te₃:Cu_0.003.     

The distinct role of transition metal doping for LiFePO<Subscript>4</Subscript> cathode material

This study addresses the controversial issue of the effect of metal ion doping on the electrochemical performance of LiFePO₄. Metal doping is claimed to be a possible cause for the capacity improvement of LiFePO₄ as carbon coating. Results obtained inthis study show that dry-milled LiFePO₄ and LiFe_0.9Cr_0.1PO₄ deliver 119 mAh g⁻¹ and 101 mAh g⁻¹, while wet-milled LiFePO₄ and LiFe_0.9Cr_0.1PO₄ deliver 149 mAh g⁻¹ and 138 mAh g⁻¹, respectively. This indicates that the capacity improvement by metal doping is due to the carbonaceous materials produced during fabrication and not by the enhancement of ion diffusion. On the other hand, cycle test results show that metal doping enhances the rate capability at high C-rates by accelerating lithium ion diffusion.     

Electrochemical properties of carbon-coated LiFePO<Subscript>4</Subscript> and LiFe<Subscript>0.98</Subscript>Mn<Subscript>0.02</Subscript>PO<Subscript>4</Subscript> cathode materials synthesized by solid-state reaction

Olivine structured LiFePO4/C (lithium iron phosphate) and Mn2+-doped LiFe0. 98Mn0. 024/C powders were synthesized by the solid-state reaction. The effects of manganese partial substitution and different carbon content coating on the surface of LiFePO4 were considered. The structures and electrochemical properties of the samples were measured by X-ray diffraction (XRD), cyclic voltammetry (CV), charge/discharge tests at different current densities, and electrochemical impedance spectroscopy (EIS). The electrochemical properties of LiFePO4 cathodes with x wt. ％ carbon coating (x=3, 7, 11, 15) at γ=0. 2C, 2C (1C=170 mAh·g-1) between 2. 5 and 4. 3 V were investigated. The measured results mean that the LiFePO4 with 7 wt. ％ carbon coating shows the best rate performance. The discharge capacity of LiFe0. 98Mn0. 02PO4/C composite is found to be 165 mAh·g 1 at a discharge rate, γ=0. 2C, and 105 mAh·g-1 at γ=2C, respectively. After 10cycles, the discharge capacity has rarely fallen, while that of the pristine LiFePO4/C cathode is 150 mAh·g-1 and 98 mAh·g-1 at γ=0. 2 and 2C, respectively. Compared to the discharge capacities of both electrodes above, the evident improvement of the electrochemical performance is observed, which is ascribed to the enhancement of the electronic conductivity and diffusion kinetics by carbon coating and Mn2+-substitution.     

Thermoelectric properties of In<Subscript>z</Subscript>Co<Subscript>4</Subscript>Sb<Subscript>12</Subscript> skutterudites

In this study, indium-filled CoSb₃ skutterudite is synthesized via encapsulated induction melting and subsequent annealing at 823 K for six days, and the crystal structure, lattice constant, filler position, phase homogeneity and stability were investigated. All of the In-filled CoSb₃ samples were n-type conducting samples. The temperature dependence of the electrical resistivity showed In_zCo₄Sb₁₂ is a highly degenerate semiconducting material. The thermal conductivity was reduced considerably by In filling. The highest thermoelectric figure of merit value was achieved when the In filling fraction is 0.25. It was found that the ZT of the In-filled CoSb₃ (In_zCo₄Sb₁₂) was higher than that of the In-substituted CoSb₃ (Co_3.75In_0.25Sb₁₂ and Co₄Sb_11.75In_0.25). This is mainly due to the lower thermal conductivity and higher Seebeck coefficient.     

Enhanced photoluminescence properties of CaYBO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>,Al<Superscript>3+</Superscript> by doping Al<Superscript>3+</Superscript> for plasma display panel applications

The effect of photoluminescence properties for (CaY)_1−x−yTb_xAl_yBO₄ phosphors was studied, considering the doped Al³⁺ and Tb³⁺ contents. The emission intensity of the Al³⁺-doped (CaY)_0.915Tb_0.06Al_0.025BO₄ phosphors under VUV excitation was more than two times stronger than that of the Al³⁺-free (CaY)_0.94Tb_0.06BO₄. The contents of Tb³⁺ showing the strongest emission for the (CaY)_0.975−xTbxAl_0.025BO₄ and (CaY)_1−xTb_xBO₄ phosphors were x = 0.1 and 0.12, respectively. The results confirm that incorporating Al³⁺ in (CaY)_1−xTb_xBO₄ phosphors is highly favorable for improving emission characteristics, along with production cost-effectiveness.     

Synthesis of nano-sized Co<Subscript>3</Subscript>O<Subscript>4</Subscript> powder by spray conversion method for anode material of lithium battery

A nano-sized Co₃O₄ powder was prepared using a spray conversion method that could be applied for mass production. The spray-conversion process consisted of spray drying of a metallic liquid solution, a calcination treatment, and a ball milling process. The calcined Co₃O₄ powder consisted of agglomerated spherical clusters with nano-sized particles. After milling for 24 h, agglomerated powders were fragmented into fine powders sized below 60 nm. The lithium/cobalt oxide cell was charge-discharged at a constant current density of 0.2 mAcm⁻² and showed a first discharge capacity of 1100 mAhg⁻¹. The discharge capacity of the Li/Co₃O₄ cell drastically decreased with cycle number. By increasing the carbon content of the anode, the cycle life was improved. For a Co₃O₄ electrode containing 40 wt.% carbon, the discharge capacity was over 400 mAhg⁻¹ after 50 cycles. The spray conversion method might be a useful method to prepare nano-sized Co₃O₄ powder for the anode material of lithium batteries.     

Solvothermal synthesis and thermoelectric properties of skutterudite compound Fe（0.25）Ni（0.25）Co（0.5）Sb3

Nanostructured skutterudite-related compound Fe_0.25Ni_0.25Co_0.5Sb₃ was synthesized by a solvothermal method using FeCl₃, NiCl₂, CoCl₂, and SbCl₃ as the precursors and NaBH₄ as the reductant. The solvothermally synthesized powders consisted of fine granules with an average particle size of tens of nanometers. The bulk material was prepared by hot pressing the powders. Transport property measurements indicated a heavily doped semiconductor behavior with n-type conduction. The thermal conductivity is about 1.83 W·m⁻¹·K⁻¹ at room temperature and decreases to 1.57 W·m⁻¹·K⁻¹ at 673 K. The low thermal conductivity is attributed to small grain size and high porosity. A maximum dimensionless figure of merit of 0.15 is obtained at 673 K.     

Thermodynamic optimization of the Na<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript> pseudo-binary system

The Na₂O-B₂O₃ system is thermodynamically optimized by means of the CALPHAD method. A two-sublattice ionic solution model, (Na⁺¹)_P(O⁻²,BO₃ ⁻³,B₄O₇ ⁻²,B₃O_4.5)_Q, has been used to describe the liquid phase. All the solid phases were treated as stoichiometric compounds. A set of thermodynamic parameters, which can reproduce most experimental data of both phase diagram and thermodynamic properties, was obtained. Comparisons between the calculated results and experimental data are presented.     

Oxidation Behavior of TiAl<Subscript>3</Subscript>/Al Composite Coating on Orthorhombic-Ti<Subscript>2</Subscript>AlNb Based Alloy at Different Temperatures

This paper reports the oxidation behavior of TiAl₃/Al composite coating deposited by cold spray. The substrate alloy was orthorhombic-Ti-22Al-26Nb (at.%). The oxidation kinetics of the coating was tested at 650, 800, and 950 °C, respectively. The parabolic rate constant for the coating oxidized at 650 °C was k _p = 7.2 × 10⁻² mg·cm⁻²·h^−1/2 for the tested 1200 h. For the coating oxidized at 800 °C, the oxidation kinetics could be separated into two stages with k _p value of 39.8 × 10⁻² mg·cm⁻²·h^−1/2 for the initial 910 h and 17.7 × 10⁻² mg·cm⁻²·h^−1/2 for the stage thereafter. For the coating oxidized at 950 °C, the oxidation kinetics can be separated into three stages with k _p of 136.9 × 10⁻² mg·cm⁻²·h^−1/2 in the first 100 h, followed by 26.9 × 10⁻² mg·cm⁻²·h^−1/2 from 100 to 310 h, and 11.8 × 10⁻² mg·cm⁻²·h^−1/2 from 310 to 1098 h. XRD, SEM, and EPMA were used to study the microstructure of the coating. The results indicated that the oxidation took place throughout the entire coating instead of only at the surface. The aluminum phase in the composite coating was soon oxidized to Al₂O₃ in all tested cases. The aluminum in TiAl₃ phase was depleted gradually and oxidized to Al₂O₃ along with the degradation of TiAl₃ to TiAl₂ and TiAl as the temperature increased and time proceeded. AlTi₂N was also a typical oxidation product at temperature higher than 800 °C. The experimental results also indicated that the protection of the coating was attributed greatly to the interlayer formed between the coating and the substrate.     

High temperature thermoelectric properties of skutterudite-Bi2Te3 nanocomposites

Nanocomposite engineering has been proved effective in diverse regimes of material research to attain a performance beyond each constituent phase. In this work, Yb-filled CoSb₃ (bulk matrix/host)-Bi_0.4Sb_1.6Te₃ (secondary inclusion) thermoelectric nanocomposites have been synthesized via an ex situ process. Bi_0.4Sb_1.6Te₃ inclusions are mainly distributed at the grain boundaries of Yb_0.2Co₄Sb₁₂ matrix in the composites. In particular, Te diffuses in situ from Bi_0.4Sb_1.6Te₃ through Yb_0.2Co₄Sb₁₂ matrix during the hot pressing process. This, combined with the grain boundary effect, results in favorable changes in the carrier concentration, carrier mobility, electrical resistivity, Seebeck coefficient, and thermal conductivity. Such synergistic changes are notably absent in the stand-alone Te-doped Yb-filled CoSb₃, suggesting the key role of diffusion and grain boundaries. As a result, a maximum ZT value of 0.96 has been attained for Yb_0.2Co₄Sb₁₂-2 wt% Bi_0.4Sb_1.6Te₃ at 650 K. The present work opens a new avenue towards high performance thermoelectric composites via controlled inter-constituent diffusion and grain boundary effect.     

Kinetics of forward extraction of Ti（IV） from H_2SO_4 medium by P_（507） in kerosene using the single drop technique

The kinetics of forward extraction of Ti(IV) from H2SO4 medium by P507 in kerosene has been investigated using the single drop technique.In the low concentration region of Ti(IV),the rate of forward extraction at 298 K can be represented by F(kmol·m-2·s-1)=10-5.07 [TiO 2 + ][H+]-1 [NaHA 2 ](o)·Analysis of the rate expression reveals that the rate determining step is(TiO)(i)2+ +(HA 2)(i)-[TiO(HA2)](i)+.The values of Ea,H±,S±,and G±298 are calculated to be 22 kJ·mol-1,25 kJ·mol-1,-218 J·mol-1·K-1,and 25 kJ·mol-1,respectively.The experimental negative S± values indicate that the reaction step occurs via SN2 mechanism.     

Electronic structures of new tunnel barrier spinel MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: first-principles calculations

The electronic structures of spinel MgAl2O4 and MgO tunnel barrier materials were investigated using first-principles density functional theory calculations. Our results show that similar electronic structures are found for the MgAl2O4 and MgO tunneling barriers. The calculated direct energy gaps at the Γ-point are about 5. 10 eV for MgAl2O4 and 4. 81 eV for MgO, respectively. Because of the similar feature in band structures from Γ high-symmetry point to F point (△ band), the coherent tunneling effect might be expected to appear in MgAl2O4-based MTJs like in MgO-based MTJs. The small difference of the surface free energies of Fe (2. 9 J. m-2) and MgAl2O4 (2. 27 J·m-2) on the {100}orientation, and the smaller lattice mismatch between MgAl2O4 and ferromagnetic electrodes than that between MgO and ferromagnetic electrodes, the spinel MgAl2O4 can substitute MgO to fabricate the coherent tunneling and chemically stable magnetic tunnel junction structures, which will be applied in the next generation read heads or spintronic devices.     

Synthesis and thermoelectric properties of CoSb3/WO3 thermoelectric composites

In this study, nano-sized WO₃ powder was dispersed into CoSb₃ powder by ball milling and CoSb₃/WO₃ thermoelectric composites were fabricated using hot-pressing sintering. The results showed that the WO₃ phase distributed uniformly in the form of clusters and the average size of cluster was lower than 4 μm. As the content of WO₃ increased, the electrical conductivity and Seebeck coefficient of CoSb₃/WO₃ composites decreased. The thermal conductivity of composites decreased obviously which resulted from the phonon scattering by the WO₃ inclusions locating on the grain boundaries of CoSb₃ matrix. The highest thermoelectric figure of merit ZT = 0.40 was achieved at 650 K for CoSb₃/2%WO₃ composite.     

Porous Y<Subscript>2</Subscript>O<Subscript>3</Subscript> microcubes: synthesis and characterization

In this work, a facile route using a simple solvothermal reaction and sequential heat treatment process to prepare porous Y₂O₃ microcubes is presented. The as-synthesized products were characterized by X-ray powder diffraction (XRD), scanning electronic microscope (SEM), energy dispersive spectrometer (EDS), thermogravimetric analysis (TG), and differential thermal analysis (DTA). The thermal decomposition process of the Y₂O₃ precursor was investigated. SEM results demonstrated that the as-prepared porous Y₂O₃ microcubes were with an average width of about 20 μm and thickness of about 8 μm. It was found that the morphology of the Y₂O₃ precursor could be readily tuned by varying the molar ratio of S₂O₈²⁻ to Y³⁺. Y₂O₃:Eu³⁺ (6.6%) microcubes were also prepared and their photoluminescence properties were investigated.