Effect of Ni precursor salts on Ni-mayenite catalysts for steam methane reforming and on Ni-CaO-mayenite materials for sorption enhanced steam methane reforming

In view of climate change containment, sorption enhanced steam methane reforming (SESMR) appears as an interesting production route for H₂ with the additional advantage of CO₂ capture application performed by high-temperature solid sorbents. CaO is largely employed as CO₂ sorbent because of its low-cost mineralized forms (limestone and dolomite), of its high sorption capacity in the high temperature range compatible with steam methane reforming (SMR). Many recent studies have proposed purposely synthesized Ni-based reforming catalysts, used with high-temperature CO₂ solid sorbents, or combined sorbent-catalyst materials (CSCM). For this last purpose, we studied the effect of Ni salt precursor (Ni nitrate hexahydrate or Ni acetate tetrahydrate) on properties and reactivity of Ni-mayenite catalysts or Ni-CaO-mayenite CSCM, synthesized by an already validated sequence of wet mixing (for sorbents synthesis) and wet impregnation (for catalysts and CSCM synthesis) methods. Although Ni acetate tetrahydrate was often reported as the best choice to improve textural properties, our study identified Ni nitrate hexahydrate as a definitely more suitable precursor than Ni acetate tetrahydrate in the purpose of developing efficient materials for SESMR. The dissimilar behaviors observed in reforming reactivity are related and explained by the differences in textural properties, Ni species dispersion, and reducibility.     

Comparative exergy analysis of sorption enhanced and conventional methane steam reforming

Exergy efficiency analysis tool is used to evaluate sorption enhanced steam reforming in comparison with the industrial hydrogen production route, steam reforming. The study focuses on hydrogen production for use in high pressure processes. Thermodynamic sensitivity analysis (effect of reforming temperature on hydrogen yield and reforming enthalpy) was performed to indicate the optimum temperature (650 °C) for the sorption enhanced reforming. The pressure was selected to be, for both cases, 25 bar, a typical pressure used in the industrial (conventional) process. Atmospheric pressure, 1000 °C and CO₂ as inert gas were specified as the optimum operating parameters for the regeneration of the sorbent after performing exergy efficiency analysis of three realistic case scenarios. Aspen Plus simulation process schemes were built for conventional and sorption enhanced steam reforming processes to attain the mass and energy balances required to assess comparatively exergy analysis. Simulation results showed that sorption enhanced reforming can lead to a hydrogen purity increase by 17.3%, along with the recovery of pure and sequestration-ready carbon dioxide. The exergy benefit of sorption enhanced reforming was calculated equal to 3.2%. Analysis was extended by adding a CO₂ separation stage in conventional reforming to reach the hydrogen purity of sorption enhanced reforming and enable a more effective exergy efficiency comparison. Following that analysis, sorption enhanced reforming gained 10.8% in exergy efficiency.     

Modelling of H2 production via sorption enhanced steam methane reforming at reduced pressures for small scale applications

The production of H₂ via sorption enhanced steam reforming (SE-SMR) of CH₄ using 18 wt % Ni/Al₂O₃ catalyst and CaO as a CO₂-sorbent was simulated for an adiabatic packed bed reactor at the reduced pressures typical of small and medium scale gas producers and H₂ end users. To investigate the behaviour of reactor model along the axial direction, the mass, energy and momentum balance equations were incorporated in the gPROMS modelbuilder^®. The effect of operating conditions such as temperature, pressure, steam to carbon ration (S/C) and gas mass flow velocity (G_s) was studied under the low-pressure conditions (2–7 bar). Independent equilibrium based software, chemical equilibrium with application (CEA), was used to compare the simulation results with the equilibrium data. A good agreement was obtained in terms of CH₄ conversion, H₂ yield (wt. % of CH₄ feed), purity of H₂ and CO₂ capture for the lowest (G_s) representing conditions close to equilibrium under a range of operating temperatures pressures, feed steam to carbon ratio. At G_s of 3.5 kg m⁻²s⁻¹, 3 bar, 923 K and S/C of 3, CH₄ conversion and H₂ purity were up to 89% and 86% respectively compared to 44% and 63% in the conventional reforming process.     

Comparative analysis on sorption enhanced steam reforming and conventional steam reforming of hydroxyacetone for hydrogen production: Thermodynamic modeling

The chemical thermodynamics of sorption enhanced steam reforming (SESR) of hydroxyacetone for hydrogen production were investigated and contrasted with hydroxyacetone steam reforming (SR) by means of Gibbs free energy minimization principle and response reactions (RERs) method. Hydrogen is mainly derived methane steam reforming reaction from and water gas shift reaction. The former reaction contributes more than the latter one to hydrogen production below 550 °C and at higher temperature the latter one tends to dominate. The maximum hydrogen concentration is 70% in SR, which is far below hydrogen purities required by fuel cells. In SESR, hydrogen purities are over 99% in 525–550 °C with a WHMR greater than 8 and a CHMR of 6. The optimum temperature for SESR is approximately 125 °C lower than that for SR. In comparison with SR, SESR has the advantage of almost complete inhibition of coke formation in 200–1200 °C for WHMR ≥ 3.     

The operation types and operation window for high-purity hydrogen production for the sorption enhanced steam methane reforming in a fixed-bed reactor

The operation types and operation window for high-purity H₂ production for the sorption enhanced steam methane reforming (SE-SMR) with Ni/Al₂O₃ catalyst and CaO sorbent in a fixed-bed reactor are investigated by an experimentally verified 2D numerical method. Four chemical reactions including steam reforming, water gas shift, global steam reforming, and CO₂ sorption are considered. The operation window is defined as the H₂ and CO molar fractions at outlet satisfying both y_H2,out ≥ 90% and y_CO,out ≤ y_CO,allow (= 1%, 2% or 3%) in dry base. Under the conditions of y_H2,out and y_CO,allow, there are six operation types, of which 2 types are within the operation window and 4 types are not within the operation window as the temperature, weight hourly space velocity (WHSV) and steam to methane (S/C) molar ratio vary. For a common case of S/C = 3, the operation windows for y_CO,allow = 3% at WHSV = 8.5 h^?1 and 42.5 h^?1 are located at 570–670 °C and 640–690 °C respectively, based on the parameters in this work. The operation window of temperature is wider with decreasing WHSV, and it becomes wider remarkably as the S/C ratio increases. The lowest temperature inside the operation window is 550 °C. The effects of the temperature, WHSV and S/C ratio on the operating types, y_H2,out and y_CO,out are also presented and discussed in details.     

Synthetic CaO-based sorbent for high-temperature CO2 capture in sorption-enhanced hydrogen production

Calcium precursor and surfactant addition on properties of synthetic alumina-containing CaO-based for CO₂ capture and for sorption-enhanced steam methane reforming process (SE-SMR) were investigated. Results showed that the sorbent derived from calcium d-gluconic acid (CG-AN) offered CO₂ sorption capacity of 0.38 g CO₂/g sorbent, which is greater than 0.17 g CO₂/g sorbent of the sorbent derived from calcium nitrate (CN-AN). Addition of CTAB surfactant during synthesis was found to enhance CO₂ sorption capacity for CG-AN but not for CN-AN sorbents. Stability tests of the modified sorbents for 10 cycles showed that CG-AN-CTAB provided higher CO₂ sorption capacity than CN-AN-CTAB for each corresponding cycle. Incorporation of CG-AN with Ni catalyst (Ni-CG-AN) using wet-mixing technique offered the longest pre-breakthrough period of 60 min for average maximum H₂ purity of 88% at 600 °C and a steam/methane molar ratio of 3.     

Hydrogen production by sorption enhanced steam reforming of propane: A thermodynamic investigation

Thermodynamic features of hydrogen production by sorption enhanced steam reforming (SESR) of propane have been studied with the method of Gibbs free energy minimization and contrasted with propane steam reforming (SR). The effects of pressure (1-5 atm), temperature (700-1100 K) and water to propane ratio (WPR, 1-18) on equilibrium compositions and carbon formation are investigated. The results suggest that atmospheric pressure and a WPR of 12 are suitable for hydrogen production from both SR and SESR of propane. High WPR is favourable to inhibit carbon formation. The minimum WPR required to eliminate carbon production is 6 in both SR and SESR. The most favourable temperature for propane SR is approximately 950 K at which 1 mol of propane has the capacity to produce 9.1 mol of hydrogen. The optimum temperature for SESR is approximately 825 K, which is over 100 K lower than that for SR. Other key benefits include enhanced hydrogen production of nearly 10 mol (stoichiometric value) of hydrogen per mole of propane at 700 K, increased hydrogen purity (99% compared with 74% in SR) and no CO₂ or CO production with the only impurity being CH₄, all indicating a great potential of SESR of propane for hydrogen production.     

Production of high purity hydrogen by sorption enhanced steam reforming of crude glycerol

Here we report effective production of pure hydrogen from crude glycerol by the one-stage sorption enhanced steam reforming (SESR) process. This process yielded H₂ up to 88% with a very high purity (99.7 vol%) at atmospheric pressure and at 550–600 °C with a steam/C = 3 in a fixed-bed reactor over a mixture of Ni/Co catalyst derived from hydrotalcite-like material (HT) and dolomite as CO₂ sorbent. The concentration of methane is lowest at 575 °C, while the CO concentration increases concurrently with increasing temperature from 525 to 600 °C. The high coking potential of glycerol and fatty acid methyl esters (C₁₇–C₁₉) resulted in the increased formation of coke, thus lower hydrogen yield. The reaction rates of methane reforming and water–gas shift reactions are much higher than the steam reforming of crude glycerol on Co–Ni catalysts. The high purity of hydrogen can be obtained even at low spatial times with low crude glycerol conversions. Our work reveals a great potential to directly convert biomass derived complex mixtures to the most clean energy carrier of hydrogen with high yield and purity.     

Solar steam reforming for enriched methane production: Reactor configurations modeling and comparison

A solar low-temperature steam reforming process for the production of an Enriched Methane (EM) mixture composed by CH₄ and H₂ (20%vol) exploiting the solar energy stored in a Molten Salt stream heated up by a Concentrating Solar Plant (MS-CSP) is presented and simulated through a two-dimensional steam reforming reactor model.     

Sorption-enhanced ethanol steam reforming on Ce-Ni/MCM-41 with simultaneous CO2 adsorption over Na- and Zr- promoted CaO based sorbent

In this study, sorption-enhanced ethanol steam reforming (SEESR) is investigated using a Ce-Ni/MCM-41 as a catalyst in the presence of Na or/and Zr promoted CaO-based adsorbents. Ce-Ni/MCM-41 and promoted sorbents were synthesized by wet impregnation method. The catalyst was characterized by XRD, FTIR, TGA, EFSEM, TEM, H₂-TPR and N₂ adsorption/desorption and promoted sorbents were studied by XRD, EFSEM, BET, TEM and TGA analysis. Sorption experiments were performed to verify sorbent activity for CO₂ removing. The results indicated that with doping different promoter on CaO sorbent and also with increasing Na loading, there was an increase in BET surface area, the reduction in particle size and thereupon an enhancement in CO₂ sorption capacity. Higher BET surface area, smaller particle size, and superior CO₂ sorption capacity were obtained on Na-Zr-CaO sorbent. Sorption-enhanced steam reforming process of ethanol on synthesized catalyst and sorbents were performed at 600 °C and water to ethanol molar ratio of 6. The effect of sorbent to catalyst ratio and the arrangement of sorbent and catalyst (like two separated layers and the mixture of sorbent and catalyst in a single layer) were also studied. The best results were demonstrated on Na-Zr-CaO sorbent and with the separated array. Hydrogen production via a SEESR process with Na-Zr-CaO as sorbent was ∼94% that is 24% more than that of conventional ethanol steam reforming (ESR) reaction.     

Catalytic performance of a high-cell-density Ni honeycomb catalyst for methane steam reforming

The catalysis of methane steam reforming (MSR) by pure Ni honeycombs with high cell density of 2300 cells per square inch (cpsi) was investigated to develop efficient and inexpensive catalysts for hydrogen production. The Ni honeycomb catalyst was assembled using 30-μm-thick Ni foils, and showed much higher activity than that of a Ni honeycomb catalyst with cell density of 700 cpsi at a steam-to-carbon ratio of 1.36 and a gas hourly space velocity of 6400 h^?1 in a temperature range of 873–1173 K. Notably, the activity increased approximately proportional to the increasing geometric specific surface area of the honeycombs. The turnover rate of the Ni honeycomb catalyst was higher than that of supported Ni catalysts. The changes in chemical state of the Ni catalyst during hydrogen reduction and MSR reaction were analyzed by in situ X-ray absorption fine structure spectroscopy, which revealed that deactivation was mainly due to oxidation of the surface Ni atoms. These results demonstrated that the high-cell-density Ni honeycomb catalyst exhibits good performance for MSR reaction, and easy regeneration of the deactivated Ni honeycomb catalyst is possible only via hydrogen reduction.     

Sorption enhanced steam reforming of ethanol for hydrogen production,over Mg/Al hydrotalcites modified with K

Sorption-enhanced ethanol steam reforming is an interesting alternative, to produce high purity H₂. In this study, potassium promoted hydrotalcites are compared for sorption-enhanced ethanol steam reforming reaction under cyclic operation, performing sorbent regeneration at reaction temperature which is a great advantage to reduce process energy requirements. It is found that potassium promoted hydrotalcites have higher CO₂ sorption capacity compared to unpromoted ones, due to the higher concentration of intermediate and strong basic sites. The hydrotalcite modified with 15 wt% potassium shows the best performance on multicyclic CO₂ sorption-desorption (sorption capacity = 0.167 mol_CO2/kgsorbent). Therefore, there is an optimum loading of potassium, for which the opposite effects of reduction in surface area and enhanced basicity are balanced. Finally, potassium promoted hydrotalcites are tested under cyclical ethanol reforming process with simultaneous adsorption of CO₂ followed by regeneration in N₂ at reaction temperature (500 °C). At short reaction times (<5 min), H₂ purities higher than 95% are achieved, with CO₂ purities near 0%.     

Transient reaction phenomena of sorption-enhanced steam methane reforming in a fixed-bed reactor

The transient chemical reaction phenomena of the sorption-enhanced steam methane reforming (SE-SMR) by using Ni/Al₂O₃ catalyst and CaO sorbent in a tubular fixed-bed reactor were numerically investigated by an experimentally verified unsteady 2D model. Four chemical reactions are involved in SE-SMR including steam reforming (SR), water gas shift (WGS), global steam reforming (GSR), and CO₂ sorption. The reaction process in time is divided into period 1, transient period, and period 2. The high-purity H₂ is produced in period 1 which is defined as the outlet molar fractions of H₂ ≥ 90% and CO ≤ 1% (dry basis) in this work. In the first half of period 1, the endothermic reaction rates of SR and GSR are dominant in the entrance region of catalyst/sorbent bed. The WGS and CO₂ sorption reactions are triggered by SR and GSR reactions. The heat transfer from the wall plays an important role. Higher CaO conversion, temperature, and reaction rates appear first near the wall region, then they gradually expand to the central region.In the second half of period 1, a sharp wave-shaped curve of strong CO₂ sorption reaction occurred in downstream becomes dominant and it moves to downstream almost at a constant speed, as time progresses. The peak value of the CO₂ sorption reaction is more than twice larger than that of SR or WGS. The SR and WGS reaction rates are significantly enhanced by CO₂ sorption reaction. The great sorption, WGS, and SR reactions result in a high-purity H₂ production with the outlet molar fractions of 95.8% H₂, 0.998% CO, and 0.73% CO₂ at the end of period 1, based on the parameters used in this work such as reactor temperature of 600 °C. The maximum CaO conversion is about 76% in end of period 1 and the average CaO conversion in the reactor is 51%. The 2D distributions of CaO conversion, temperature, and reaction rates are also presented and discussed.     

Thermodynamic analysis of H2 production from CaO sorption‐enhanced methane steam reforming thermally coupled with chemical looping combustion as a novel technology

In this novel paper, a technique for hydrogen production route of CaO sorption‐enhanced methane steam reforming (SEMSR) thermally coupled with chemical looping combustion (CLC) was presented (CLC‐SEMSR), which perceived as an improvement of previous methane steam reforming (MSR) thermally coupled with CLC technology (CLC‐MSR). The application of CLC instead of furnace achieves the inherent separation of CO₂ from flue gas without extra energy required. The required heat for the reformer is provided by thermally coupling CLC. The addition of CaO sorbents can capture CO₂ as it is formed from the reformer gas to the solid phase, displacing the normal MSR equilibrium restrictions and obtaining higher purity of H₂. The Aspen Plus was used to simulate this novel process on the basis of thermodynamics. The performances of this system examined included the composition of reformer gas, yield of reformer gas (Y_Rg), methane conversion (α_M), the overall energy efficiency (η), and exergy efficiency (φ) of this process. The effects of the molar ratio of CaO to methane for reforming (Ca/M) in the range of 0–1.2, the molar ratio of methane for combustion to methane for reforming (M(fuel)/M) in the range of 0.1–0.3, and the molar ratio of NiO to methane for reforming (Ni/M) in the range of 0.4–1.2 were investigated. It has been found to be favored by operating under the conditions of Ca/M = 1, M(fuel)/M = 0.2, and Ni/M = 0.8. The most excellent advantage of CLC‐SEMSR was that it could obtain higher purity of H₂ (95%) at lower operating temperature (655 °C), as against H₂ purity of 77.1% at higher temperature (900 °C) in previous CLC‐MSR. In addition, the energy efficiency of this process could reach 83.3% at the optimal conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison between 1D and 2D numerical models of a multi-tubular packed-bed reactor for methanol steam reforming

The hydrogen-rich gas produced in-situ by methanol steam reforming (MSR) reactions significantly affects the performance and endurance of the high-temperature polymer electrolyte membrane (HT-PEM) fuel cell stack. A numerical study of MSR reactions over a commercial CuO/ZnO/Al₂O₃ catalyst coupling with the heat and mass transfer phenomena in a co-current packed-bed reactor is conducted. The simulation results of a 1D and a 2D pseudo-homogeneous reactor model are compared, which indicates the importance of radial gradients in the catalyst bed. The effects of geometry and operating parameters on the steady-state performance of the reactor are investigated. The simulation results show that the increases in the inlet temperature of burner gas and the tube diameter significantly increase the non-uniformity of radial temperature distributions in reformer tubes. Hot spots are formed near the tube wall in the entrance region. The hot-spot temperature in the catalyst bed rises with the increase in the inlet temperature of burner gas. Moreover, the difference in simulation results between the 1D and 2D models is shown to be primarily influenced by the tube diameter. With a methanol conversion approaching 100% or a relatively small tube diameter, the simplified 1D model can be used instead of the 2D model to estimate the reactor performance.     

Hydrogen production through sorption enhanced steam reforming of natural gas: Thermodynamic plant assessment

A detailed and comprehensive simulation model of a H₂ production plant based on the Sorption Enhanced Reforming (SER) process of natural gas has been developed in this work. Besides thermodynamic advantages related to the shift of reforming equilibrium, SER technology features an intrinsic CO₂ capture that can be of interest in environmentally constrained economies. The model comprises natural gas treatment, H₂ and CO₂ compression, as well as H₂ purification with an adsorption unit that has been integrated within the SER process by using the off-gas for sorbent regeneration. A complete thermal integration has been also performed between the available hot gas streams in the plant, so that high pressure steam is generated and used to generate power in a steam cycle.     

Modelling of methane sorption enhanced reforming for blue hydrogen production in an adiabatic fixed bed reactor: unravelling the role of the reactor's thermal behavior

Methane sorption enhanced reforming (SER) is investigated in this work as a promising route for blue H₂ production. A 1-D dynamic heterogeneous model is developed to evaluate the thermal behavior of a fixed bed reactor under adiabatic conditions. The heterogeneous model allows to decouple the feed gas temperature from the initial solid one in order to investigate the behavior of the reforming step in a temperature swing reforming/regeneration process. The effects of the feed gas temperature, the initial bed temperature, and the bed thermal capacity are studied by evaluating the global impact of each parameter through a set of key performance indices (CH₄ conversion, H₂ yield and purity, carbon capture ratio) calculated as integrals over the duration of the reforming step. The results highlight the minor effect of the initial bed temperature on the process performances showing the potential of minimizing the extent of a cooling step between regeneration and reforming stages. Besides, due to the endothermic nature of the methane sorption enhanced reforming process at high temperatures, thermal energy must be provided to the SER process to achieve high CH₄ conversion and high carbon capture ratio. This can be made either in the form of high feed temperature or by utilizing the energy stored in the bed benefiting from the bed thermal capacity.     

Thermodynamic equilibrium analysis of steam methane reforming based on a conjugate solution of material balance and law action mass equations with the detailed energy balance

Thermodynamic equilibrium analysis of the steam methane reforming (SMR) process to synthesis gas was studied. For this purpose, the system equations of the material balance and the equations of law mass action were solved by dichotomy method. The investigation was performed for a wide range of operational conditions such as a temperature, pressure, and inlet steam-to-methane ratio. The results obtained, with the help of developed algorithms, were compared with the results obtained via different commercial and open-source programs. All results are in excellent agreement. The operational conditions for the probable formation of carbon were determined. It was established that for the temperature range above 1100 K, the probability of carbon formation is absent for steam-to-methane ratio above units. In order to determine the amount of heat supplied per 1 mol to the reformer, the heat balance equation was obtained to achieve a targeted degree of methane conversion. With the help of the heat balance equation, it was established that the resulting transformation of substances in the steam methane reformer can be presented as a sequential heating of feed streams of methane and steam from the inlet temperature T₁ to the outlet temperature T₂, heat for SMR reaction at the temperature T₂, and heat for transformation of the part of the produced carbon monoxide (CO) via the water-gas shift (WGS) reaction at the temperature T₂. The presented algorithm of thermodynamic analysis gives an appearance of the dependence of the product composition and the amount of required heat from operating conditions such as the temperature, pressure, and steam-to-methane ratio.     

Novel core-shell-like Ni-supported hierarchical beta zeolite catalysts on bioethanol steam reforming

Hierarchical-Beta zeolites have been hydrothermally synthesized by adding a new gemini organic surfactant. The used gemini surfactant play the role of a “pore-forming agents” on the mesoscale, on the same time, providing alkaline environment for the system. With this hierarchical Beta zeolite as the core support, we successfully prepared a shell layer of Ni-containing (22 wt%) petal-like core-shell-like catalyst and applied it to bioethanol steam reforming. At the reaction temperature of 350 °C–550 °C, the conversion rate of ethanol and the selectivity of hydrogen were always above 85% and 70%. After reaction of 100 h on stream at 400 °C, there were not obvious inactivation could be observed on NiNPs/OH-MBeta catalyst.     

Production of H2 via sorption enhanced auto-thermal reforming for small scale Applications-A process modeling and machine learning study

Small scale production of H₂ via sorption enhanced auto-thermal reforming (SEATR) of methane is simulated using Ni based catalyst and CaO sorbent for the capturing of CO₂. One dimensional heterogeneous reactor model was developed using gPROMS model builder to study the performance of SEATR reactor. At low pressure mode, the process was evaluated for varying temperature, pressure, gas flux and steam to carbon ratio. Chemical equilibrium with application (CEA), an equilibrium based software was employed so as to compare both equilibrium and simulation results. Under a range of temperature (500–1000 K), pressure (1–10 bar), S/C ratio (1–6), and O/C ratio (0.2–0.6) close to equilibrium conditions, model outputs satisfactory results with regard to CH₄ conversion, CO₂ capturing, H₂ yield and purity. At 750 K, 2.9 bar, G_s of 0.4 kg/m² s, S/C of 3 and O/C of 0.45, H₂ purity and CH₄ conversion achieved was 97% and 94% respectively in comparison with 66% and 77% from conventional auto-thermal reforming. In Bayesian Regularization (BR), Mean square error(MSE) and R value is minimum for neural network algorithm comparison. It accounts for 1.2e⁻¹⁰ and 0.999 respectively. BR produces minimum error with increase in Epochs and gradients values highlighting maximum performance with optimize computation time for process modeling data-integration studies and generalization.