共查询到20条相似文献,搜索用时 140 毫秒
1.
研制了基于时分外差法检测的非对称薄壁壳型光纤一维地震波检波器,该检波器易于扩展为三轴分立式地震波检波器,具有检测动态范围大,易于构成大规模时分复用传感网络的优点。建立了非对称地震波检波器的理论模型,分析了各结构参数对其灵敏度的影响;搭建了基于光学同步参考信号的时分外差法测试系统,进行了外差系统的稳定性测试,测量了地震波检波器的频响曲线,结果表明外差系统测量信号波动小于0.1dB;工作频段20~800Hz内加速度平均灵敏度为28.5dB re rad/g,与理论仿真结果基本吻合。 相似文献
2.
3.
4.
本方法可以检测到低于 HP8551B 频谱分析仪噪声基底35dB 的弱微波信号。外差接收机通常不能检测功率电平低于系统灵敏度的输入信号。使用带有电子计数器的外差接收机可以提取比基底噪声低得多的这类弱信号。 相似文献
5.
针对基于3×3相位解调的光纤地震检波器展开研究.利用基于最小二乘法的椭圆拟合法和微分交叉相乘算法,实现基于3×3相位解调的光纤地震检波器的两路输出信号的归一化,减小光纤3×3耦合器的非对称性和激光器的功率波动对光纤地震检波器的影响,解调出光纤地震检波器的相位,实现振动信号的准确还原.实验采用对比法测试了基于3×3相位解调的光纤地震检波器的性能,其灵敏度为320 rad/g@100 Hz,在5~400 Hz频率范围内的波动约为0.7 dB.该研究能够很好地应用于石油、天然气等地质勘探、地震监测以及周界安防等领域. 相似文献
6.
为了提取激光外差玻璃测厚系统中的微弱信号,介绍了激光外差玻璃厚度测量系统原理及待检测信号特征,采用一种简洁、实用的滤波软件,设计出一种高指标带通滤波器,从滤波器频谱图看待检测的激光外差信号频谱完全在通频带内,噪声衰减带达到80 dB,其完全符合系统要求。 相似文献
7.
基于双金属膜片结构的海底地震勘探光纤加速度传感器研究 总被引:2,自引:2,他引:0
针对全光海底地震检波器技术的特殊应用需求,设计了一种基于双金属矩形膜片的缠绕式光纤加速度传感器。利用弹性力学理论对光纤加速度传感器的加速度灵敏度和一阶共振频率的特性进行了分析,制作了光纤加速度传感器样品并对其性能进行了测试。结果表明,本文加速度传感器的灵敏度为45dB re∶0dB=1rad/g,一阶共振频率在820Hz左右,与理论分析值很好吻合。在10~400Hz工作带宽中,交叉去敏度约为30dB。测试系统中,使用的相位生成载波(PGC)解调算法的最小相位检测精度为10-5 rad/Hz1/2,因此理论能探测的最小加速度信号为56ng/Hz1/2。由于采用全金属结构,本文类型光纤加速度传感器能够更好地满足海底永久布放检波器的特殊要求。 相似文献
8.
9.
10.
11.
GU Min-fen LIANG Zhong-cheng WANG Ren-zhou DONG Xiang-mei ZHANG Pei-ming CHEN Jia-bi 《光电子快报》2008,4(2):150-152
Waveguide multilayer optical card (WMOC) is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling & processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic (VB) language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor. 相似文献
12.
R.Pelzer P.Lindner T.Glinsner B.Vratzov C.Gourgon S.Landis P Kettner C.Schaefer 《半导体技术》2004,29(7):86-91
IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL… 相似文献
13.
The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well. 相似文献
14.
Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems. 相似文献
15.
A doping system consisting of NPB and PVK is employed as a composite hole transporting layer (CHTL). By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK : NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK : NPB at 1:3. 相似文献
16.
An insert layer structure organic electroluminescent device(OLED) based on a new luminescent material (Zn(salen)) is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn(salen)/Liq/LiF/A1/CuPc/NPD/Zn(salen)/Liq/LiF/A1. Effective insert electrode layers comprising LiF(1nm)/Al(5 nm) are used as a single semitransparent mirror, and bilayer cathode LiF(1 nm)/A1(100 nm) is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect. 相似文献
17.
Due to variable symbol length of digital pulse interval modulation(DPIM), it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation(FDPIM) method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively. 相似文献
18.
It is a key problem to accurately calculate beam spots' center of measuring the warp by using a collimated laser. A new method, named double geometrical center method (DGCM), is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device (CCD) is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What's more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high. 相似文献
19.
Michael Reilly 《半导体技术》2004,29(12)
DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system. 相似文献
20.
High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET > PDMAT > TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center. 相似文献