Saturable Absorber Cr(4)+:(Sr, Ca)Gd(4)(SiO(4))(3)O Crystals as Q Switches for a Diode-Pumped Nd(3)+:KGd(WO(4))(2) Laser

Passive Q switching of a diode-pumped Nd(3+):KGd(WO(4))(2) laser is demonstrated by use of Cr(4+):SrGd(4)(SiO(4))(3)O and Cr(4+):CaGd(4)(SiO(4))(3)O crystals as saturable absorbers. An average output power of 40 mW was obtained with a pulse repetition rate of ~0.4 MHz.     

Microemulsion-based synthesis of porous zinc ferrite nanorods and its application in a room-temperature ethanol sensor

Porous zinc ferrite (ZnFe(2)O(4)) nanorods with a diameter of around 50?nm and a length of several micrometers have been synthesized by a microemulsion-based method in combination with calcination at 500?°C. The morphology and structure of the ZnFe(2)O(4) nanorods and its precursor (ZnFe(2)(C(2)O(4))(3) nanorods) were systematically characterized by x-ray powder diffraction, transmission electron microscopy, field emission scanning electron microscopy and high-resolution transmission electron microscopy. The formation mechanism for the porous ZnFe(2)O(4) nanorods is also discussed. Moreover, the porous ZnFe(2)O(4) nanorods were applied in a room-temperature ethanol sensor and exhibited much better sensing performance than ZnFe(2)O(4) nanoparticles.     

Simple template-free solution route for the synthesis of Ni(SO(4))(0.3)(OH)(1.4) nanobelts and their thermal degradation

Nanobelts of nickel hydroxyl sulfate have been prepared on a large scale via a simple template-free hydrothermal reaction on the basis of a complex [Ni(NH(3))(6)](2+) formed with Ni(2+) and ammonia in an ethanol-water solution. The as-synthesized nanobelts were single crystals, with several tens of microns in length and 50-150?nm in width. The nanobelts were enclosed by top surfaces (100) and side surfaces (001) and their growth direction was parallel to [010]. The function of aqueous ammonia and ethanol was discussed. Furthermore, nanostructures of a mixture of crystralline NiO and amorphous nickel sulfate with various morphologies, such as nanobelts, porous nanobelts, and nanoparticles, were obtained by the thermal treatment of the as-synthesized Ni(SO(4))(0.3)(OH)(1.4) nanobelts at different temperatures.     

From cobalt nitrate carbonate hydroxide hydrate nanowires to porous Co(3)O(4) nanorods for high performance lithium-ion battery electrodes

We have developed a simple approach for the large-scale synthesis of cobalt nitrate carbonate hydroxide hydrate (Co(CO(3))(0.35)(NO(3))(0.2)(OH)(1.1)·1.74H(2)O) nanowires via the hydrothermal process using sodium hydroxide and formaldehyde as mineralizers at 120?°C. The porous Co(3)O(4) nanorods 10-30?nm in diameter and hundreds of nanometres in length have been fabricated from the above-mentioned multicomponent nanowires by calcination at 400?°C. The morphology and structure of cobalt nitrate carbonate hydroxide hydrate nanowires and Co(3)O(4) nanorods have been characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and x-ray powder diffraction (XRD). Moreover, the porous Co(3)O(4) nanorods have been applied in the negative electrode materials for lithium ion batteries, which exhibit high electrochemical performance.     

Non-aqueous synthesis of water-dispersible Fe3O4-Ca3(PO4)2 core-shell nanoparticles

The Fe(3)O(4)-Ca(3)(PO(4))(2) core-shell nanoparticles were prepared by one-pot non-aqueous nanoemulsion with the assistance of a biocompatible triblock copolymer, poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEO-PPO-PEO), integrating the magnetic properties of Fe(3)O(4) and the bioactive functions of Ca(3)(PO(4))(2) into single entities. The Fe(3)O(4) nanoparticles were pre-formed first by thermal reduction of Fe(acac)(3) and then the Ca(3)(PO(4))(2) layer was coated by simultaneous deposition of Ca(2+) and PO(4)(3-). The characterization shows that the combination of the two materials into a core-shell nanostructure retains the magnetic properties and the Ca(3)(PO(4))(2) shell forms an hcp phase (a = 7.490 ?, c = 9.534 ?) on the Fe(3)O(4) surface. The magnetic hysteresis curves of the nanoparticles were further elucidated by the Langevin equation, giving an estimation of the effective magnetic dimension of the nanoparticles and reflecting the enhanced susceptibility response as a result of the surface covering. Fourier transform infrared (FTIR) analysis provides the characteristic vibrations of Ca(3)(PO(4))(2) and the presence of the polymer surfactant on the nanoparticle surface. Moreover, the nanoparticles could be directly transferred to water and the aqueous dispersion-collection process of the nanoparticles was demonstrated for application readiness of such core-shell nanostructures in an aqueous medium. Thus, the construction of Fe(3)O(4) and Ca(3)(PO(4))(2) in the core-shell nanostructure has conspicuously led to enhanced performance and multi-functionalities, offering various possible applications of the nanoparticles.     

Silica shell-assisted synthetic route for mono-disperse persistent nanophosphors with enhanced in vivo recharged near-infrared persistent luminescence

Near-infrared (NIR) persistent-luminescence nanoparticles have emerged as a new class of background-free contrast agents that are promising for in vivo imaging.The next key roadblock is to establish a robust and controllable method for synthesizing monodisperse nanoparticles with high luminescence brightness and long persistent duration.Herein,we report a synthesis strategy involving the coating/etching of the SiO2 shell to obtain a new class of small NIR highly persistent luminescent ZnGa2O4∶Cr3+,Sn4+ (ZGOCS) nanoparticles.The optimized ZGOCS nanoparticles have an excellent size distribution of ～15 nm without any agglomeration and an NIR persistent luminescence that is enhanced by a factor of 13.5,owing to the key role of the SiO2 shell in preventing nanoparticle agglomeration after annealing.The ZGOCS nanoparticles have a signal-to-noise ratio ～3 times higher than that of previously reported ZnGa2O4∶Cr3+ (ZGC-1) nanoparticles as an NIR persistent-luminescence probe for in vivo bioimaging.Moreover,the persistent-luminescence signal from the ZGOCS nanoparticles can be repeatedly re-charged in situ with external excitation by a white lightemitting diode;thus,the nanoparticles are suitable for long-term in vivo imaging applications.Our study suggests an improved strategy for fabricating novel high-performance optical nanoparticles with good biocompatibility.     

Broadband NIR emission in sol-gel Er(3+)-activated SiO2-Ta2O5 glass ceramic planar and channel waveguides for optical application

An Er(3+)-doped SiO2:Ta2O5 optical channel waveguide and nanocomposite were prepared by the sol-gel route at a Si:Ta 50:50 molar ratio. Channels with an excellent surface profile were easily and quickly fabricated by focusing a femtosecond laser onto the surface of multilayered films deposited on SiO2/Si substrates. In parallel, the same sol used to prepare the film was annealed at 900, 1000, and 1100 degrees C for 2 h, to get the nanocomposite materials. A broadband NIR emission around 1538 nm, assigned to the 4I13/2 --> 4I15/2 transition of the Er3+ ions was observed in the nanocomposites of amorphous SiO2 containing dispersed Ta2O5 nanocrystals. The 4I13/2 lifetime and emission bandwidth depend on the annealing temperature. In conclusion, Er(3+)-doped SiO2:Ta2O5 channel waveguides and nanocomposites are promising materials for photonic applications.     

Upconversion fluorescent nanoparticles as a potential tool for in-depth imaging

Upconversion nanoparticles (UCNs) are nanoparticles that are excited in the near infrared (NIR) region with emission in the visible or NIR regions. This makes these particles attractive for use in biological imaging as the NIR light can penetrate the tissue better with minimal absorption/scattering. This paper discusses the study of the depth to which cells can be imaged using these nanoparticles. UCNs with NaYF(4) nanocrystals doped with Yb(3+), Er(3+) (visible emission)/Yb(3+), Tm(3+) (NIR emission) were synthesized and modified with silica enabling their dispersion in water and conjugation of biomolecules to their surface. The size of the sample was characterized using transmission electron microscopy and the fluorescence measured using a fluorescence spectrometer at an excitation of 980 nm. Tissue phantoms were prepared by reported methods to mimic skin/muscle tissue and it was observed that the cells could be imaged up to a depth of 3 mm using the NIR emitting UCNs. Further, the depth of detection was evaluated for UCNs targeted to gap junctions formed between cardiac cells.     

嵌有纳米碳颗粒凝胶玻璃的制备及其发光特性

以磷酸三乙酯、硝酸铝和正硅酸乙酯为原料,通过它们的水解制备了ｘＡｌ_２Ｏ_３·ｘＰ_２Ｏ₅·１００ＳｉＯ_２（ｘ＝０．２５～３）凝胶．在６００℃对凝胶进行热处理,使其中的有机基团炭化,从而制备出了镶嵌有碳纳米颗粒的ｘＡｌ_２Ｏ_３·ｘＰ_２Ｏ_５·１００ＳｉＯ_２（ｘ＝０．２５,０．５）凝胶玻璃．在室温下以５３２ｎｍ激光（Ｎｄ：ＹＡＧ）激发,在 ６３０ｎｍ处有一强的发光峰,该发光现象是由镶嵌在凝胶玻璃中的纳米碳颗粒产生的．     

Highly enhanced acetone sensing performances of porous and single crystalline ZnO nanosheets: high percentage of exposed (100) facets working together with surface modification with Pd nanoparticles

Porous and single crystalline ZnO nanosheets, which were synthesized by annealing hydrozincite Zn(5)(CO(3))(2)(OH)(6) nanoplates produced with a water/ethylene glycol solvothermal method, are used as building blocks to construct functional Pd-ZnO nanoarchitectures together with Pd nanoparticles based on a self-assembly approach. Chemical sensing performances of the ZnO nanosheets were investigated carefully before and after their surface modification with Pd nanoparticles. It was found that the chemical sensors made with porous ZnO nanosheets exhibit high selectivity and quick response for detecting acetone, because of the 2D ZnO nanocrystals exposed in (100) facets at high percentage. The performances of the acetone sensors can be further improved dramatically, after the surfaces of ZnO nanosheets are modified with Pd nanoparticles. Novel acetone sensors with enhanced response, selectivity and stability have been fabricated successfully by using nanoarchitectures consisting of ZnO nanosheets and Pd nanoparticles.     

Comparison of laser performance of dye molecules in sol-gel, polycom, ormosil, and poly(methyl methacrylate) host media

Laser performance is described for Rhodamine 590, Pyrromethene 567, Perylene red, and Perylene orange in inorganic porous sol-gel glass, poly(methyl methacrylate)(PMMA), a composite of porous sol-gel glass with PMMA and organically modified silicate ormosil glass. Lasers were excited with a flash-lamp-pumped dye laser in the long-pulse-length regime (3 μs, 506 nm, 300 mJ) and a second-harmonic Nd:YAG laser in the short-pulse-length regime (6 or 15 ns, 532 nm, 60 mJ). The feasibility of long-pulse-length operation is demonstrated, detailed characteristics of short-pulse operation are described, and laser damage measurements are given. The nonpolar perylene dyes had better performance in partially organic hosts, and the ionic rhodamine and pyrromethene dyes performed best in the inorganic sol-gel glass host.     

Preparation of low-crystalline apatite nanoparticles and their coating onto quartz substrates

We prepared low-crystalline apatite nanoparticles and coated them onto a surface of a Au/Cr-plated quartz substrate by the electrophoretic deposition (EPD) method or by using a self-assembled monolayer of 11-mercaptoundecanoic acid (SAM method). Low-crystalline apatite nanoparticles around 10?nm in size with extremely low contents of undesirable residual products were obtained by adding (NH(4))(2)HPO(4) aqueous droplets into a modified synthetic body fluid solution that contained Ca(CH(3)COO)(2). The apatite nanoparticles were successfully coated by either the EPD method or the SAM method; the nanoparticle coating achieved by the SAM method was more uniform than that achieved by the EPD method. The present SAM method is expected to be a promising technique for obtaining a quartz substrate coated with apatite nanoparticles, which can be used as a quartz crystal microbalance device.     

In-situ sol-gel synthesis of nanophosphors M2Y8(SiO4)6O2:Eu3+(M = Ca, Sr) derived from novel crosslinking reagents as silicon sources

M2Y8(SiO4)6O2:Eu3+(M = Ca, Sr) nanophosphors were synthesized using sol-gel technology by adopting eight different kinds of silicon sources of novel crosslinging reagents. X-ray diffraction and scanning electronic microscopy show that these materials have sizes of 20-80 nm with different configurations due to the diversity of the silicate sources. Some nanophosphors present the regular microstructure despite high temperature thermolysis. In addition, all these nanophosphors exhibit strong emission at 618 nm.     

助熔剂和还原气氛对掺铕硅酸锶荧光粉发光性能的影响

采用传统高温固相反应法制备了掺铕硅酸锶荧光粉。在近紫外光激发下,Sr2SiO4:Eu2+发出明亮的黄绿光。其发射光谱由峰值分别位于490nm和550nm的两个属于Eu2+的5d→4f发射带叠加组成。当Eu2+浓度为0.005mol时,发光最强。研究了不同助熔剂(NH4F、NH4Cl、NaF、Li2CO3、H3BO3)及不同还原气氛(5%H2-95%N2混合气体和C粒)对Eu2+掺杂的Sr2SiO4发光性能的影响。结果表明添加助熔剂后大大降低了烧结温度,并不同程度地提高了2个发射峰的强度。结果还表明5%H2-95%N2混合气体还原效果比C粒好。     

Photoluminescence and lasing from deoxyribonucleic acid (DNA) thin films doped with sulforhodamine

Thin solid films of salmon deoxyribonucleic acid (DNA) have been fabricated by treatment with a surfactant and used as host for the laser dye sulforhodamine (SRh). The DNA films have an absorption peak at approximately 260 nm owing to absorption by the nitrogenous aromatic bases. The SRh molecules in the DNA films have absorption and emission peaks at 578 and 602 nm, respectively. The maximum emission was obtained at approximately 1 wt. % SRh in DNA, equivalent to approximately 100 DNA base pairs per SRh molecule. A distributed feedback grating structure was fabricated on a SiO(2)-Si substrate using interference lithography. The grating period of 437 nm was selected, corresponding to second-order emission at the amplified spontaneous emission wavelength of 650 nm. Lasing was obtained by pumping with a doubled Nd:YAG laser at 532 nm. The lasing threshold was 3 microJ, corresponding to approximately 30 microJ/cm(2) or 4 kW/cm(2). The emission linewidth decreased from approximately 30 nm in the amplified spontaneous emission mode to <0.4 nm (instrument limited) in the lasing mode. The slope efficiency of the lasing was approximately 1.2%.     

Magnetic SiO(2)/Fe(3)O(4) colloidal crystals

We proposed a novel technique to fabricate colloidal crystals by using monodisperse SiO(2) coated magnetic Fe(3)O(4)(SiO(2)/Fe(3)O(4)) microspheres. The magnetic SiO(2)/Fe(3)O(4) microspheres with a diameter of 700?nm were synthesized in the basic condition with ferric sulfate, ferrous sulfate, tartaric acid and tetraethyl orthosilicate (TEOS) in the reaction system. Monodisperse SiO(2)/Fe(3)O(4) superparamagnetic microspheres have been successfully used to fabricate colloidal crystals under the existing magnetic field.     

Frequency-modulation mode-locking performance for four Nd(3+)-doped laser crystals

To determine an optimum host for simultaneous short-pulse-width and large-slope-efficiency generation, the performance of Nd:YAG, Nd:YLF, Nd:YVO(4), and Nd(3+):Sr(5)(VO(4))(3)F [Nd:strontium fluorovanadate (S-VAP)] was characterized under a variety of end-pumped and frequency-modulation mode-locking conditions. The slope efficiency, threshold pump power, and pulse width were recorded for each laser and compared with theory. A figure of merit was defined, yielding Nd:YLF and Nd:YVO(4) as the experimentally determined crystals of choice.     

Biofunctionalization of CeF(3):Tb(3+) nanoparticles

CeF(3):Tb(3+) nanoparticles (short pillar-like morphology with an average length and width of 11 and 5?nm, respectively) were successfully prepared by a polyol process using diethyleneglycol (DEG) as solvent. After being functionalized with a SiO(2)-NH(2) layer, these CeF(3):Tb(3+) nanoparticles can be conjugated with biotin molecules (activated by thionyl chloride) and further with avidin. The as-formed CeF(3):Tb(3+) nanoparticles, CeF(3):Tb(3+) nanoparticles functionalized with amino groups, biotin conjugated amino-functionalized CeF(3):Tb(3+) nanoparticles and biotinylated CeF(3):Tb(3+) nanoparticles bonded with avidin were characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), UV/vis absorption spectra and luminescence spectra, respectively. The biofunctionalization of the CeF(3):Tb(3+) nanoparticles has less effect on their luminescence properties, i.e. they still show strong green emission (from Tb(3+), with (5)D(4)-(7)F(5) at 543?nm as the most prominent group), indicative of the great potential for these CeF(3):Tb(3+) nanoparticles to be used as biological fluorescence probes.     

The two-photon excitation of SiO(2)-coated Y(2)O(3):Eu(3+) nanoparticles by a near-infrared femtosecond laser

In order to improve the photoluminescence property of Eu(3+)-doped nanoparticles, Y(2)O(3):Eu(3+) nanoparticles were synthesized using the Pechini-type sol-gel method, then coated with SiO(2) shells by using the St?ber method for different coating times. The SiO(2)-coated nanoparticles were characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy, and their photoluminescence spectra were recorded under 800?nm femtosecond laser excitation. The results indicate that a two-photon simultaneous absorption upconversion luminescence is obtained, and their upconversion luminescence intensities are further enhanced after the surfaces of the nanoparticles are coated with different thickness SiO(2) shells. Compared to the upconversion luminescence intensity of non-coated nanoparticles at 611?nm, the upconversion luminescence intensities of SiO(2)-coated Y(2)O(3):Eu(3+) nanoparticles with coating times of 60, 90 and 120?min were enhanced by 3.30, 3.96 and 4.13 times, respectively. This can be attributed to the contributions of the increased amounts of Eu(3+) ions populated at the (5)D(0) level on the surfaces of the nanoparticles because the cooperative ligand fields between the Y(2)O(3) core and non-crystalline SiO(2) shell interfaces activate the 'dormant' Eu(3+) ions near or on the surfaces of the nanoparticles. From a Judd-Ofelt (J-O) theory analysis, the coated shell structures can improve the radiative quantum efficiencies of Eu(3+)-doped nanoparticles. It is therefore concluded that more intense red upconversion luminescence with high radiative quantum efficiencies can enable the SiO(2)-coated Y(2)O(3):Eu(3+) nanoparticles to have the great potential to be used as a fine resolution phosphor.