Amylopectin structure of heat–moisture treated starches

The effects of heat–moisture treatment (HMT; moisture content of 25%, at 100°C for 24 h) on starch chain distribution and unit chain distribution of amylopectin in normal rice, waxy rice, normal corn, waxy corn, normal potato, and waxy potato starches were investigated. After HMT, starch chain distribution (amylose and amylopectin responses) of waxy corn and potato starches were identical to those of untreated starches, whereas the chromatographic response of waxy rice starch showed a slight decrease, but with a slight increase in peak tailing. This result indicated that HMT had no (or very limited) effect on the degradation of amylopectins. Analysis of unit chain distribution of amylopectins revealed that waxy characteristics affected the molecular structure of amylopectin in untreated starches, i.e., the CL of normal‐type starches was greater than that of waxy‐type starches. After HMT, the CL and unit chain distribution of all starches were no different than those of untreated starches. The results implied that changes in the physico‐chemical properties of HMT starches would be due to other phenomena rather than the degradation of amylopectin molecular structure. However, the thermal degradation of amylopectin molecules of waxy starches could occur by HMT at higher treatment temperatures (120 and 140°C).     

Effect of single and dual hydrothermal treatments on the crystalline structure,thermal properties,and nutritional fractions of pea,lentil, and navy bean starches

Pea, lentil and navy bean starches were annealed at 50 °C (70% moisture) for 24 h and heat-moisture treated at 120 °C (30% moisture) for 24 h. These starches were also modified by a combination of annealing (ANN) and heat-moisture treatment (HMT). The impact of single and dual modifications (ANN–HMT and HMT–ANN) on the crystalline structure, thermal properties, and the amounts of rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) were investigated. Birefringence remained unchanged on ANN but decreased on HMT. Granular swelling and amylose leaching decreased on ANN and HMT. Relative crystallinity, gelatinization enthalpy, and short-range order on the granule surface increased on ANN but decreased on HMT. Gelatinization transition temperatures increased on ANN and HMT. Gelatinization temperature range decreased and increased on ANN and HMT, respectively. ANN and HMT increased SDS and decreased RS levels in all starches. However, RDS levels increased on ANN and HMT in pea and lentil starches but decreased in navy bean starch. In gelatinized starches, ANN and HMT decreased RDS level and increased SDS and RS levels. Changes to crystalline structure, thermal properties and amounts of RDS, SDS, and RS were modified further on ANN–HMT and HMT–ANN.     

Physicochemical,crystallinity, pasting and thermal properties of heat‐moisture‐treated pinhão starch

The effect of heat‐moisture treatment (HMT) on the properties of pinhão starches under different moisture and heat conditions was investigated. The starches were adjusted to 15, 20 and 25% moisture levels and heated to 100, 110 and 120°C for 1 h. The X‐ray diffractograms, swelling power, solubility, gel hardness, pasting properties and thermal properties of the native and HMT pinhão starches were evaluated. Compared to native starch, there was an increase in the X‐ray intensity and gel hardness of HMT starches, with the exception of the 25% moisture‐treated and 120°C heat‐treated starch. HMT reduced the swelling power and solubility of the pinhão starches when compared to native starch. There was an increase in the pasting temperature, final viscosity and setback and a decrease in the peak viscosity and breakdown of HMT pinhão starches compared to native starch. HMT increases the gelatinisation temperature of native pinhão starch and reduces gelatinisation enthalpy.     

Slowly digestible starch from heat-moisture treated waxy potato starch: Preparation,structural characteristics,and glucose response in mice

Heat-moisture treatment (HMT) was optimised to increase the formation of slowly digestible starch (SDS) in waxy potato starch, and the structural and physiological properties of this starch were investigated. A maximum SDS content (41.8%) consistent with the expected value (40.1%) was obtained after 5 h 20 min at 120 °C with a 25.7% moisture level. Differential scanning calorimetry of HMT starches showed a broadened gelatinization temperature range and a shift in endothermal transition toward higher temperatures. After HMT, relative crystallinity decreased with increasing moisture level and X-ray diffraction patterns changed from B-type to a combination of B- and A-types. Hollow regions were found in the centres of HMT waxy potato starches. HMT intensity significantly influenced SDS level. This study showed that HMT-induced structural changes in waxy potato starch significantly affected its digestibility and the blood glucose levels of mice who consumed it.     

Microstructural and physicochemical properties of heat-moisture treated waxy and normal starches

Starches from normal rice (21.72% amylose), waxy rice (1.64% amylose), normal corn (25.19% amylose), waxy corn (2.06% amylose), normal potato (28.97% amylose) and waxy potato (3.92% amylose) were heat-treated at 100 °C for 16 h at a moisture content of 25%. The effect of heat-moisture treatment (HMT) on morphology, structure, and physicochemical properties of those starches was investigated. The HMT did not change the size, shape, and surface characteristics of corn and potato starch granules, while surface change/partial gelatinization was found on the granules of rice starches. The X-ray diffraction pattern of normal and waxy potato starches was shifted from B- to C-type by HMT. The crystallinity of the starch samples, except waxy potato starch decreased on HMT. The viscosity profiles changed significantly with HMT. The treated starches, except the waxy potato starch, had higher pasting temperature and lower viscosity. The differences in viscosity values before and after HMT were more pronounced in normal starches than in waxy starches, whereas changes in the pasting temperature showed the reverse (waxy > normal). Shifts of the gelatinization temperature to higher values and gelatinization enthalpy to lower values as well as biphasic endotherms were found in treated starches. HMT increased enzyme digestibility of treated starches (except waxy corn starch); i.e., rapidly and slowly digestible starches increased, but resistant starch decreased. Although there was no absolute consistency on the data obtained from the three pairs of waxy and normal starches, in most cases the effects of HMT on normal starches were more pronounced than the corresponding waxy starches.     

Resistant starch and thermal,morphological and textural properties of heat‐moisture treated rice starches with high‐, medium‐ and low‐amylose content

This study investigated the effects of heat‐moisture treatment (HMT) on the resistant starch content and thermal, morphological, and textural properties of rice starches with high‐, medium‐ and low‐amylose content. The starches were adjusted to 15, 20 and 25% moisture levels and heated at 110°C for 1 h. The HMT increased the resistant starch content in all of the rice starches. HMT increased the onset temperature and the gelatinisation temperature range (T_finish–T_onset) and decreased the enthalpy of gelatinisation of rice starches with different amylose contents. This reduction increased with the increase in the moisture content of HMT. The morphology of rice starch granules was altered with the HMT; the granules presented more agglomerated surface. The HMT affected the textural parameters of rice starches; the high‐ and low‐amylose rice starches subjected to 15 and 20% HMT possessed higher gel hardness.     

Digestibility and physicochemical properties of granular sweet potato starch as affected by annealing

The effects of annealing on the digestibility, morphology, and physicochemical characteristics of four types of granular sweet potato starches [Yulmi (YM), Yeonwhangmi (YHM), sweet potato starch from Samyang Genex (SSPS), and commercial sweet potato starch (CSPS)] were investigated. Annealing was performed at 55°C and 90% moisture content for 72 h. Morphology, the branched chain distribution of amylopectin, and the X-ray diffraction pattern remained unchanged during the annealing process. The slowly digestible starch content in annealed YM, YHM, and SSPS starches increased, but did not change in annealed CSPS. The gelatinization temperatures increased, but the gelatinization temperature range decreased with annealing. The swelling factor and amylose leaching decreased, while the close packing concentration increased. Rapid Visco Analyser analysis revealed that annealed starches possessed thermal stability and higher pasting temperatures. It is suggested that the enhanced packing arrangement formed during annealing impacts the digestibility and physicochemical properties of sweet potato starches.     

Digestibility and Pasting Properties of Rice Starch Heat‐Moisture Treated at the Melting Temperature (Tm )

Non‐waxy and waxy rice starches adjusted to 20% moisture (wet based, w.b.) were heated in a differential scanning calorimeter to determine the optimum parameters for producing slowly digestible starch (SDS). Starches heated to the temperature of melting (T_m) and held for 60 min in the calorimeter showed a slow digestibility compared to unheated samples. Digestibility decreased by 25 and 10%, respectively, for non‐waxy and waxy rice starches relative to non‐treated starches. Heat‐moisture treatment of waxy corn, non‐waxy corn and wheat starches at the T_m determined for non‐waxy rice starch did not result in significant decreases in digestibility. For waxy rice starches heat‐treated in microwave or conventional ovens at the T_m , there were slight but significant increases in digestibility of the treated starches compared to non‐treated starches at all incubation times. Digestibility was higher for starches heated for 30 min than for 60 min. Non‐waxy rice starches did not show any significant changes in digestibility. Heat‐moisture treatment at the T_m and the holding time of sample at that temperature in a differential scanning calorimeter were found to be significant to the formation of slowly digestible heat‐moisture treated starch.     

Chemical and Physical Properties of Kiwifruit (Actinidia deliciosa) Starch

Chemical and physical properties of kiwifruit (Actinidia deliciosa var. ‘Hayward’) starch were studied. Kiwifruit starch granules were compound, irregular or dome‐shaped with diameters predominantly 4–5 µm or 7–9 µm. Kiwifruit starch exhibited B‐type X‐ray diffraction pattern, an apparent amylose content of 43.1% and absolute amylose content of 18.8%. Kiwifruit amylopectins, relative to other starches, had low weight‐average molecular weight (7.4×10⁷), and gyration radius (200 nm). Average amylopectin branch chain‐length was long (DP 28.6). Onset and peak gelatinization temperatures were 68.9°C and 73.0°C, respectively, and gelatinization enthalpy was high (18.5 J/g). Amylose‐lipid thermal transition was observed. Starch retrograded for 7 d at 4°C had a very high peak melting temperature (60.7°C). Peak (250 RVU), final (238 RVU) and setback (94 RVU) viscosity of 8% kiwifruit starch paste was high relative to other starches and pasting temperature (69.7°C) was marginally higher than onset gelatinization temperature. High paste viscosities and low pasting temperature could give kiwifruit starch some advantages over many cereal starches.     

Physicochemical Properties of Pin Oak (Quercus palustris Muenchh.) Acorn Starch

Physicochemical properties of acorn (Quercus palustris) starch were studied. Acorn starch granules were spherical or ovoid, with diameters ranging from 3–17 μm. Acorn starch exhibited A‐type X‐ray diffraction pattern, an apparent amylose content of 43.4% and absolute amylose content of 31.4%. Relative to other A‐type starches, acorn amylopectin had a comparable weight‐average molar mass (3.9×10⁸ g/mol), gyration radius (288 nm) and density (16.3 g mol⁻¹nm⁻³). Average amylopectin branch chain‐length corresponded to DP 25.5. Onset gelatinization temperature was 65.0°C and peak gelatinization temperature was considerably higher (73.7°C). The enthalpy change of gelatinization was very high compared to non‐mutant starches (20.8 J/g). An amylose‐lipid thermal transition was not observed. Starch retrograded for 7 d at 4°C had very high peak melting temperature (54.2°C) relative to other A‐type starches. Final (260 RVU) and setback (138 RVU) viscosity of an 8% acorn starch paste was high relative to other starches and pasting temperature was 71.5°C.     

Influence of heat–moisture treatment and annealing on functional properties of sorghum starch

Sorghum starch was annealed in excess water at 50 °C for 24 h. Starch was also modified under heat–moisture treatment at 110 °C after adjusting various moisture contents (20, 30 and 40%) for 8 h. Significant decrease in chain lengths of amylose fraction in HMT starches was observed. Heat moisture treated (HMT) and annealed (ANN) starches showed lower granule sizes, swelling power, peak and setback viscosity but higher retrogradation as compared to native starch. HMT starch with addition of 40% moisture showed a decrease in relative crystallinity. HMT and ANN starch gels were observed to be harder than native starch gel.     

Influence of hydroxypropylation on retrogradation properties of native,defatted and heat-moisture treated potato starches

Recent studies have shown that defatting and heat-moisture treatment cause structural changes within the amorphous and crystalline regions of potato starch. Furthermore, the alkaline reagents (NaOH and Na₂SO₄) used during hydroxypropylation has been shown to cause structural changes within the amorphous and crystalline regions of native, defatted and heat-moisture treated starches. In this study, we have compared (using different techniques) the retrogradation properties of potato starch before and after physical (defatting and heat-moisture treatment), and chemical (alkaline treatment and hydroxypropylation) modification. Turbidity measurements showed that changes in turbidity during storage (4°C for 24 h and then at 40°C for 29 days) of native, defatted and heat-moisture treated gelatinized starch pastes were influenced by the interplay of two factors: (1) interaction between leached starch components (amylose–amylose, amylose–amylopectin, amylose–amylopectin), and (2) interaction between granule remnants and leached amylose and amylopectin. In alkali treated gelatinized native, defatted and heat-moisture treated starch pastes, turbidity changes on storage was influenced by aggregation of granule remnants. Hydroxypropylation decreased the rate and extent of increase in turbidity during storage of native, defatted and heat-moisture treated starches. The change in turbidity during storage of hydroxypropylated starch pastes was influenced by the interplay between: (1) steric effects imposed by hydroxypropyl groups on chain aggregation, (2) aggregation between small granule remnants, and (3) settling of large granule remnants beneath the path of the spectrophotometer beam. Stored gelatinized pastes of native, defatted and heat-moisture treated starches gave a `B' type X-ray pattern. A similar pattern was also observed after alkaline treatment, and hydroxypropylation. However, the X-ray intensity of the strong reflection at 5.2 Å decreased after alkaline treatment and hydroxypropylation. The retrogradation endotherm (monitored by differential scanning calorimetry) occurred after 2 days storage in native, defatted and heat-moisture treated starches. A similar trend was also observed after alkaline treatment. However, the retrogradation endotherm appeared only after 7 days in hydroxypropylated starches. The enthalpy of retrogradation in all starches decreased on alkaline treatment and hydroxypropylation.     

Glycerol-enhancing heat-moisture treatment of A-type rice and cassava starches and B-type potato and canna starches

Effects of glycerol on the heat-moisture treatment (HMT) of A-type rice and cassava starches and B-type potato and canna starches were investigated. Starch samples were soaked in water or glycerol solution, adjusted to 25% moisture, and then subjected to HMT at 100 °C for 1, 6, and 16 h. Pasting profiles of all four starches plasticised with water clearly showed the B-type potato and canna starches were more susceptible to HMT than the A-type rice and cassava starches. The effect of HMT on the pasting properties of glycerol-plasticised samples was inconclusive; the B-type canna and A-type cassava starches were altered, but not the B-type potato and A-type rice starches, which remained comparable to the water-plasticised samples. Thus, the type of plasticiser as well as the environment surrounding the crystalline region, which is specific to each starch type, also affect the alteration of starch during HMT.     

Heat–Moisture Treatment on Pinhão Starch Impacts the Properties of the Biodegradable Films

Using non-conventional starch can benefit the industry since it can present different properties. It also can lead to new properties upon physical modification, which improves its derivate film properties. Therefore, the aim of this work is to evaluate the heat–moisture treatment (HMT) on pinhão starch and its effectiveness in film properties. After isolation using water as a solvent, the pinhão starch is treated by HMT for 16 h at 110 °C. Native and HMTed starches are used to produce biodegradable films. Pinhão starch and starch films chemical and physical properties are properly characterized. The HMT causes some changes in short-range ordered structures, reduces the relative crystallinity, and shifts the pinhão starch from C-type to A-type. Also, HMT decreases the peak viscosity and the breakdown, and improves thermal stability. These starch changes upon HMT reduces water vapor permeability, increases tensile strength, and elongation at the break of pinhão starch films. Desirable changes in starch and film properties are achieved by physically modifying pinhão starch using HMT, which is a promising alternative to chemical modifications.     

Molecular structure and granule morphology of native and heat‐moisture‐treated pinhão starch

Pinhão seed is an unconventional source of starch and the pines grow up in native forests of southern Latin America. In this study, pinhão starch was adjusted at 15, 20 and 25% moisture content and heated to 100, 110 and 120 °C for 1 h. A decrease in λ max (starch/iodine complex) was observed as a result of increase in temperature and moisture content of HMT. The ratio of crystalline to amorphous phase in pinhão starch was determined via Fourier transform infra red by taking 1045/1022 band ratio. A decrease in crystallinity occurred as a result of HMT. Polarised light microscopy indicated a loss of birefringence of starch granules under 120 °C at 25% moisture content. Granule size distribution was further confirmed via scanning electron microscopy which showed the HMT effects. These results increased the understanding on molecular and structural properties of HMT pinhão starch and broadened its food and nonfood industrial applications.     

Effect of hydrothermal treatment of runner bean (Phaseolus coccineus) seeds and starch isolation on starch digestibility

The study investigated the effect of traditional soaking and cooking, storage after cooking and freezing (? 18 °C, 21 days) and autoclaving of two varieties of runner bean on starch digestibility. Results achieved were compared with digestibility of isolated starch subjected to similar treatments. The digestibility of native starch from Nata var. seeds was lower after isolation than in raw flour. This starch was characterized by a higher content of fat and lower values of swelling power (SP) and amylose leaching (AML). After the thermal treatment, a significantly higher content of rapidly digestible starch (RDS) was observed both in seeds and starch. It was accompanied by reduced contents of resistant starch (RS) and slowly digestible starch (SDS). In flours from cooked seeds, the content of RDS was observed to be higher than in flours from autoclaved seeds, despite similar changes in contents of other constituents (ash and protein). It was probably due to better starch gelatinization owing to the long-lasting soaking of seeds. This resulted in a greater decrease of amylose content of starch compared to the other flours. Differences in SP, AML and thermal properties between starches isolated from two bean varieties had no influence on their digestibility after cooking. The storage of starch pastes at a temperature of ? 18 °C, unlike that of seeds, resulted in a significant increase in RS content, which shows the importance of other flour components in the process of starch retrogradation.     

Impact of heat-moisture treatment applied to brown rice flour on the quality and digestibility characteristics of Korean rice cake

Effect of heat-moisture treatment (HMT) of brown rice flour on the quality and digestibility of Korean rice cake (jeolpyeon) was investigated. Brown rice flour with 20% moisture content was heat-moisture treated at 100–110 °C for 1–2 h, and subsequently cooled to 4 °C for 1–2 h. The lightness of HMT rice cake decreased as HMT temperature and time increased, whereas redness and yellowness increased. The hardness, springiness, and cohesiveness of HMT rice cake were much lower than those of brown rice cake. HMT of rice cake caused an increase in the resistant starch content and a decrease in the rapidly digestible starch content. In sensory evaluation, hardness of HMT rice cake was substantially lower than that of rice cake made with untreated brown rice due to retardation of retrogradation. However, the overall acceptability of HMT rice cake was lower than that of white rice cake or brown rice cake.     

Hydrothermal Modifications of Tropical Tuber Starches. 1. Effect of Heat‐Moisture Treatment on the Physicochemical,Rheological and Gelatinization Characteristics

Cassava, sweet potato and arrowroot starches have been subjected to heat‐moisture treatment (HMT) under different conditions using a response surface design of the variables. A comparative study was performed on the pasting properties, swelling behaviour and the gelatinization properties of the modified starches and also on the rheological and textural properties of their pastes. X‐ray diffraction studies have shown that cassava starch exhibited a slight decrease in crystallinity, whereas sweet potato and arrowroot starches showed an increase in crystallinity after HMT at 120ºC for 14 h with 20% moisture. The swelling volume was reduced and the solubility was enhanced for all three starches after HMT, but both effects were more pronounced in the case of arrowroot starch. The decrease in paste clarity of the starch after HMT was higher in the case of cassava and sweet potato starches. Viscosity studies showed that the peak viscosity of all three starches decreased after HMT, but the paste stability increased as seen from the reduced breakdown ratio and setback viscosity. Studies on rheological properties have shown that storage and loss moduli were higher for the starches heat‐moisture treated at higher moisture and lower temperature levels than the corresponding native starches. Storage of the gel at ‐20ºC resulted in a significant increase in storage modulus for all the three starches. All the textural parameters of the gels were altered after the treatment which depended on the nature of the starch and also the treatment condition.     

Effect of Osmotic Pressure on Starch: New Method of Physical Modification of Starch

A new method of physical modification of starch in the presence of high concentrated salt solution is presented, called “Osmotic Pressure Treatment” (OPT). OPT was introduced in order to produce the same physically modified products as obtained by conventional heat‐moisture treatment (HMT) of starch. Potato starch was selected for the comparative study of the two methods. For the OPT method, potato starch was suspended in a saturated solution of sodium sulfate and heated in an autoclave at 105°C and 120°C ,which corresponded to the calculated osmotic pressures of 328 and 341 atm (332 and 345 bar, respectively) (assuming sodium sulfate dissociates completely) for 15, 30 and 60 min, respectively. For the HMT method, starch with 20% moisture content was placed in a Duran bottle, then the same heat treatment method in the autoclave was applied. Light and scanning electron microscopy (SEM) showed that OPT of starch changed the shape of the starch granules to a folded structure, while the starches remained unchanged after HMT. The RVA viscogram for the OPT starch exhibited a decrease in the peak viscosity without a breakdown and an increase of the pasting temperature when increasing the temperature and time, which was in an agreement with the viscosity patterns for the HMT starches. X‐ray diffraction patterns were altered from B to A+B for the HMT and from B to A type for the OPT starch when treated at 120°C. After OPT, the gelatinization temperatures (T_o, T_p, and T_c) of the starch increased significantly with increasing temperature and time, whereas only the T_c of starch increases after HMT. The biphasic broadening of the peaks (high T_c‐T_o) can be explained by an inhomogeneous heat transfer during HMT. Narrow peaks in the DSC curve can be an indication for a better homogeneity of the OPT samples. However, both methods provide a similar decrease in the gelatinization enthalpy (ΔH). The amylose‐amylopectin ratio calculated from the HPSEC patterns was strongly increased for HMT starches at 105°C for 60 min and 120°C for 30 min and decreased after treatment at 120°C for 60 min. For OPT starches the ratio was strongly increased at 120°C for 15 min and decreased after prolong heating. The OPT provides a uniform heat distribution in the starch suspension. This allows the modified starch to be produced on a larger scale.     

Influence of moisture content on the degradation of waxy and normal corn starches acid-treated in methanol

Waxy and normal corn starches with different moisture contents, 5.1-16.9% and 4.8-15.9%, respectively, were prepared and treated in methanol containing 0.36% HCl at 45 °C for 1 h. Recovery of all the treated starches was found to be above 90%. Peak viscosity, gelatinization temperature and enthalpy change of gelatinization of waxy and normal corn starches decreased after treatment and this decrement was found to be more in treated starches having lower initial moisture content. The weight-average degree of polymerization and chain length (CL) of waxy and normal corn starches decreased upon acid-methanol treatment. The decrement ratio of molecular weight of modified starches was found to be negatively correlated with the initial moisture content of the starches. The decrement ratio of normal corn starch was higher than waxy corn starch with similar moisture content of starch. The content and CL of long chain fraction of amylopectin for waxy corn starch slightly decreased after treatment, while no obvious trend was found among starches with different moisture contents. CL of amylose for acid-methanol-treated normal corn starch decreased and this change was found to be higher in starches with lower initial moisture contents. Results demonstrated that the initial moisture content of starch granules strongly influenced the functional properties and degradation of starch treated by acid in methanol.