Synthesis and characterization of poly(oxyethylene)–poly(caprolactone) multiblock copolymers

Novel poly(oxyethylene)/poly(caprolactone) POE/PCL copolymers were synthesized by step growth polymerization of poly(ε-caprolactone) diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. The reaction was performed at room temperature and yielded multiblock copolymers with predetermined POE and PCL block lengths. The resulting copolymers were characterized by various analytical techniques including SEC, IR, ¹H NMR, DSC and X-ray diffractometry. Data showed that the properties of these polymers can be modulated by adjusting the chain lengths of the macromonomers. In particular, one or two crystalline structures can exist within the copolymers of various crystallinities. © 1998 SCI.     

Crosslinking of poly(arylene disulfide)s and poly(arylene sulfane)s derived from cyclic(arylene disulfide) oligomers

Cyclic(arylene disulfide) and polycyclic(arylene sulfide) oligomers were synthesized by catalytic oxidation of arylenedithiols or arylenetrithiols with oxygen in the presence of a copper‐amine catalyst. These cyclic(arylene sulfide) oligomers can undergo free radical ring‐opening polymerization at an elevated temperature in the melt or solution. Polycyclic(arylene sulfide) oligomers can be used to crosslink poly(arylene disulfide)s and poly(arylene sulfane)s derived from cyclic(arylene disulfide) oligomers and elemental sulfur. The crosslinking reactions were investigated by differential scanning calorimetry and by solubility of the cured products. The minimum concentrations of polycyclic(arylene sulfide) oligomers for producing a well crosslinked poly(arylene disulfide) and poly(arylene sulfane) are 7 wt % and 10 wt %, respectively. The crosslinking reactions between poly(arylene disulfide)s, poly(arylene sulfane)s, and triallyl‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione (TTT) were also investigated. TTT is more efficient for crosslinking than the synthesized polycyclic(arylene disulfide) oligomers. The crosslinkable poly(arylene disulfide)s and poly(arylene sulfane)s could be potentially used as high temperature coatings, sealants, adhesives, and as matrices for high performance thermoset composites. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3069–3077, 1999     

Synthesis and characterization of coordination polymers of Hg(II) with poly(thiooxamides)

Coordination polymers of Hg(II) with dithiooxamide, poly(ethylene thiooxamide), poly(butane thiooxamide), and poly(hexane thiooxamide) have been synthesized. All coordination polymers are solid compounds insoluble in common organic solvents. Coordination polymers have been characterized by elemental analysis, IR spectra, and thermogravimetric analysis and structures have been proposed leading to coordination of metal through S alone as well as N and S both. Thermal stability of the polymers has also been discussed.     

Preparations and oil absorptivities of poly(stearyl methacrylate-co-cinnamoyloxyethyl methacrylate) and PET nonwoven fiber photocrosslinked with it

Cinnamoyloxyethyl methacrylate (CEMA) was synthesized by the reaction of cinnamoyl chloride (CMC) and 2-hydroxyethyl methacrylate (HEMA). Its copolymers with stearyl methacrylate (SMA) were synthesized using benzoyl peroxide (BPO) as an initiator. The synthesized copolymers, poly(SMA-co-CEMA)s (PSCMAs), were photocrosslinked by UV light irradiation. The structures of the products were confirmed by IR and NMR spectroscopies. The thermal properties of the synthesized polymers were determined by DSC. The crystalline melting temperature of crosslinked PSCMA was decreased with increasing CEMA content in the feed. The oil absorptivities of the synthesized polymers were evaluated by the ASTM method (F726-81). The highest oil absorptivity of crosslinked PSCMA on poly(ethylene terephthalate) (PET) nonwoven fiber (NWF) was 610% in 10% crude oil diluted with toluene when the mol percentage of CEMA to SMA in the feed was 7.5. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2349–2357, 1999     

A pH and Redox Dual Responsive 4-Arm Poly(ethylene glycol)-block-poly(disulfide histamine) Copolymer for Non-Viral Gene Transfection in Vitro and in Vivo

A novel 4-arm poly(ethylene glycol)-b-poly(disulfide histamine) copolymer was synthesized by Michael addition reaction of poly(ethylene glycol) (PEG) vinyl sulfone and amine-capped poly(disulfide histamine) oligomer, being denoted as 4-arm PEG-SSPHIS. This copolymer was able to condense DNA into nanoscale polyplexes (<200 nm in average diameter) with almost neutral surface charge (+(5–10) mV). Besides, these polyplexes were colloidal stable within 4 h in HEPES buffer saline at pH 7.4 (physiological environment), but rapidly dissociated to liberate DNA in the presence of 10 mM glutathione (intracellular reducing environment). The polyplexes also revealed pH-responsive surface charges which markedly increased with reducing pH values from 7.4–6.3 (tumor microenvironment). In vitro transfection experiments showed that polyplexes of 4-arm PEG-SSPHIS were capable of exerting enhanced transfection efficacy in MCF-7 and HepG2 cancer cells under acidic conditions (pH 6.3–7.0). Moreover, intravenous administration of the polyplexes to nude mice bearing HepG2-tumor yielded high transgene expression largely in tumor rather other normal organs. Importantly, this copolymer and its polyplexes had low cytotoxicity against the cells in vitro and caused no death of the mice. The results of this study indicate that 4-arm PEG-SSPHIS has high potential as a dual responsive gene delivery vector for cancer gene therapy.     

Synthesis and properties of thio‐containing poly(ether ether ketone)s

A series of thio‐containing poly(ether ether ketone) (PEESK) polymers was synthesized by the introduction of thio groups from 4,4′ thiodiphenol (TDP) into the poly(ether ether ketone) (PEEK) structure via reaction between the phenol and aromatic fluoride groups. The effect of the thio groups on the properties of the PEESK materials was investigated. Differential scanning calorimetry (DSC) analysis and X‐ray diffraction (XRD) patterns show a depression in the crystallinity of the PEESKs with incorporation of the content of thio groups in the backbones. The crystalline structure was identified as an orthorhombic structure with lattice constants of a = 7.52 Å, b = 5.86 Å and c = 10.24 Å for all crystallizable PEESKs. The crystalline structures of the thio‐containing PEEK polymers were the same as that of the neat PEEK, which means the thio‐containing block in the whole thio‐containing PEEK molecule is almost excluded from the crystalline structure and the crystals are completely formed by ‘non‐thio’ blocks only. Due to the glass transition temperature (T_g) and melting temperature (T_m) depression with increase in the TDP content in the reaction system, the processability of the resultant thio‐containing PEEKs could be effectively improved. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of poly(methylphenylsilylene)–poly(ethylene oxide) and poly(methylphenylsilylene)–polyisoprene multiblock copolymers

Multiblock copolymers were synthesized through condensation reactions of end‐groups of α,ω‐dichloro‐poly(methylphenylsilylene) with hydroxyl end‐groups of poly(ethylene glycol) or the chain‐ends of ‘living’ polyisoprenyl disodium. Optimum conditions have been sought through kinetic studies and by investigation of model reactions. The overall molecular weight distribution of poly(methylphenylsilylene)‐block‐poly(ethylene oxide) is characterized in terms of Flory's theory of condensation reactions, while the limiting step in the reaction is tentatively attributed to the formation of aggregates. © 2001 Society of Chemical Industry     

Synthesis and characterisation of copolyesters from poly(ethylene terephthalate) and poly(hexamethylene terephthalate)

Copolyesters containing poly(ethylene terephthalate) and poly(hexamethylene terephthalate) (PHT) were prepared by a melt condensation reaction. The copolymers were characterised by infrared spectroscopy and intrinsic viscosity measurements. The density of the copolyesters decreased with increasing percentage of PHT segments in the backbone. Glass transition temperatures (T_g). melting points (T_m) and crystallisation temperatures (T_c) were determined by differential scanning calorimetry. An increase in the percentage of PHT resulted in decrease in T_g, T_m and T_c. The as-prepared copolyesters were crystalline in nature and no exotherm indicative of cold crystallisation was observed. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in a nitrogen atmosphere. An increase in percentage of PHT resulted in a decrease in initial decomposition temperature. The rate of crystallisation of the copolymers was studied by small angle light scattering. An increase in percentage of PHT resulted in an increase in the rate of crystallisation.     

Synthesis and characterization of poly(ε-caprolactone)-containing amino acid-based poly(ether ester amide)s

A new family of biodegradable amino acid-based poly(ether ester amide)s (AA-PEEAs) consisting of three building blocks [poly(ε-caprolactone) (PCL), L -phenylalanine (Phe), and aliphatic acid dichloride] were synthesized by a solution polycondensation. Using DMA as the solvent, these PCL-containing Phe-PEEA polymers were obtained with fair to very good yields with weight average molecular weight (M_w) ranging from 6.9 kg/mol to 31.0 kg/mol, depending on the original molecular weight of PCL. The chemical structures of the PCL-containing Phe-PEEA polymers were confirmed by IR and NMR spectra. These PCL-containing Phe-PEEAs had lower T_g than most of the oligoethylene glycol (OEG) based AA-PEEAs due to the more molecular flexibility of the PCL block in the backbones, but had higher T_g than non-amino acid based PEEA. The solubility of the PCL-containing Phe-PEEA polymers in a wide range of common organic solvents, such as THF and chloroform, was significantly improved when comparing with aliphatic diol based poly(ester amide)s and OEG based AA-PEEAs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polymorphic and miscibility behavior in crystalline/crystalline blends of poly(pentamethylene terephthalate) with poly(heptamethylene terephthalate)

BACKGROUND: The phase behavior of blends of semicrystalline aryl polyesters with long methylene segments (? (CH₂)_n? with n = 5 or 7) in the repeat units has not been much studied. Thus, crystalline/crystalline blends comprising monomorphic poly(pentamethylene terephthalate) (PPT) and polymorphic poly(heptamethylene terephthalate) (PHepT) were prepared and the crystal growth kinetics, polymorphism behavior and miscibility in this blend system were probed using polarized‐light optical microscopy, differential scanning calorimetry and wide‐angle X‐ray diffraction. RESULTS: The PPT/PHepT blends of all compositions were first proven to be miscible in the melt state or quenched amorphous phase, whose interaction strength was determined (χ₁₂ = ? 0.35), showing favorable interactions and phase homogeneity. Although the spherulites of neat PPT and PHepT could exhibit ring bands at different crystallization temperature (T_c) ranges (100–110 and 50–65 °C, respectively), the spherulites of PPT/PHepT (50/50) blend became ringless in the range 50–110 °C. Growth analysis and polymorphic behavior in the crystalline phases of the blends provided extra evidence for the miscibility between these two crystalline polymers. Spherulitic growth rates of PPT in the PPT/PHepT blends were significantly reduced in comparison with those of neat PPT. In addition, miscible blending of a small fraction of monomorphic PPT (20 wt%) with polymorphic PHepT altered the crystal stability and led to the originally polymorphic PHepT exhibiting only the β‐crystal form when melt‐crystallized at all values of T_c. CONCLUSION: The highly intimate mixing in polymer chains of crystalline PPT and PHepT causes significant disruption in ring‐band patterns and reduction in crystallization rates of PPT as well as alteration in the polymorphic behavior of PHepT. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Synthesis and characterization of poly(pyridylurea) and poly(pyridylthiourea), potentially semiconducting polymers

Poly(pyridylureas) and poly(pyridylthioureas) were synthesized by reacting 2,6‐diaminopyridine with phosgene and thiophosgene, respectively, using THF and pyridine as solvent. The synthesized polymers were characterized by IR‐spectroscopy, elemental analysis, and X‐ray photoelectron spectroscopy. Thermal stability of the polymers was determined by thermal degradation between 35°C and 700°C. The 50% weight loss of polypyridylureas was above 400°C while for the polypyridylthioureas it was above 450°C. Undoped poly(pyridylureas) and poly(pyridylthioureas) behave as semiconductors, σ = 10^?9 (Ω cm)^?1. After doping with I₂ and SbF₅, the electrical conductivity increases several orders of magnitude, σ = 10^?7(Ω cm)^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation and properties of poly(ethylene oxide) star polymers

Poly(ethylene oxide) (PEO) star polymers were prepared by anionic polymerization of methacryloyl chloride and glyceryl trimethacrylate with sec‐butyllithium in cyclohexane. The ensuing polymers were grafted with poly(ethylene glycol) of molecular weight 400. The final product was washed with methylene chloride and analyzed with infrared spectroscopy, differential scanning calorimetry, and thermogravimetry. Star polymers of PEO were also prepared by anionic polymerization of glycidol with sec‐butyllithium in cyclohexane. The initiator was chosen so as to yield a polymer of 10,000 molecular weight. The resulting polymers were analyzed by nuclear magnetic resonance, infrared spectroscopy, and thermogravimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 322–327, 2003     

Synthesis and characterization of a poly(ether–ester) copolymer from poly(2,6 dimethyl‐1,4‐phenylene oxide) and poly(ethylene terephthalate)

A series of poly(ether–ester) copolymers were synthesized from poly(2,6 dimethyl‐1,4‐phenylene oxide) (PPO) and poly(ethylene terephthalate) (PET). The synthesis was carried out by two‐step solution polymerization process. PET oligomers were synthesized via glycolysis and subsequently used in the copolymerization reaction. FTIR spectroscopy analysis shows the coexistence of spectral contributions of PPO and PET on the spectra of their ether–ester copolymers. The composition of the poly(ether–ester)s was calculated via ¹H NMR spectroscopy. A single glass transition temperature was detected for all synthesized poly(ether–ester)s. T_g behavior as a function of poly(ether–ester) composition is well represented by the Gordon‐Taylor equation. The molar masses of the copolymers synthesized were calculated by viscosimetry. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Preparation and characterization of thermosensitive poly(N‐isopropylacrylamide)/poly(ethylene oxide) semi‐interpenetrating polymer networks

Temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels were successfully synthesized by using poly(ethylene oxide) as the interpenetrating agent. The newly prepared semi‐interpenetrating polymer network (semi‐IPN) hydrogels exhibited much better properties as temperature‐sensitive polymers than they did in the past. Characterizations of the IPN hydrogels were investigated using a swelling experiment, FTIR spectroscopy, and differential scanning calorimetry (DSC). Semi‐IPN hydrogels exhibited a relatively high temperature dependent swelling ratio in the range of 23–28 at room temperature. DSC was used for the determination of the lower critical solution temperature of the semi‐IPN hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3032–3036, 2003     

Mixed poly(methyl methacrylate)/poly(ethylene glycol) brushes: Study of switching behavior in selective solvent

The mixed polymer brushes composed of two incompatible polymers, poly(methyl methacrylate) and poly(ethylene glycol), were successfully synthesized via a sequential grafting to method, which was confirmed by water‐contact angle and ellipsometric measurements. The resulted mixed polymer brushes could undergo conformational rearrangements upon exposure to different selective solvents, and then the lateral segregation in nonselective solvent and perpendicular segregation in selective solvent happened. As a result, the mixed polymer brushes exhibited the ripple morphology and dimple morphology in corresponding solvent, respectively, and which led to changes in water‐contact angle and surface composition as a function of bulk composition of the mixed polymer brushes. Moreover, the switching properties as the surface composition, wettability and topographical images could occur in a controlled and reversible fashion. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

ABA triblock copolymers from poly(p‐dioxanone) and poly(ethylene glycol)

Poly(p‐dioxanone)–poly(ethylene glycol)–poly(p‐dioxanone) ABA triblock copolymers (PEDO) were synthesized by ring‐opening polymerization from p‐dioxanone using poly(ethylene glycol) (PEG) with different molecular weights as macroinitiators in N₂ atmosphere. The copolymer was characterized by ¹H NMR spectroscope. The thermal behavior, crystallization, and thermal stability of these copolymers were investigated by differential scanning calorimetry and thermogravimetric measurements. The water absorption of these copolymers was also measured. The results indicated that the content and length of PEG chain have a greater effect on the properties of copolymers. This kind of biodegradable copolymer will find a potential application in biomedical materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1092–1097, 2006     

Synthesis and characterization of thermotropic liquid crystalline poly(ester‐imide‐ketone)

A series of poly(ester imide ketone)s derived from N,N′‐hexane‐1,6‐diylbis(trimellitimide), 4,4′‐dihydroxybenzophenone, and p‐hydroxybenzoic acid (PHB) were synthesized by the direct polycondensation method in benzene sulfonyl chloride, dimethylformamide, and pyridine with varied PHB contents. The liquid crystalline behavior and thermal properties of the poly(ester imide ketone)s were characterized by polarized‐light microscopy, wide‐angle X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry, and temperature‐modulated differential scanning calorimetry (MDSC). The results showed that the synthesized polymers possessed a nematic thermotropic liquid crystalline characteristic and high thermal stability. The liquid crystalline polymers, with a PHB content ranging from 0 to 50 mol %, exhibited multiple phase transitions as evidenced by the MDSC results. A transitional smectic phase from solid state to nematic thermotropic liquid crystalline state was observed, and a transition model is proposed. Under certain conditions, the polymer with 33 mol % PHB content showed two significantly different liquid crystalline textures. This type of liquid crystalline polymer exhibited excellent fiber forming. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1045–1052, 2003     

Poly(2‐alkyloyloxyethylacrylate) and poly(2‐alkyloyloxyethylacrylate‐co‐methylacrylate) comblike polymers as novel phase‐change materials for thermal energy storage

A series of poly(2‐alkyloyloxyethylacrylate) and poly(2‐alkyloyloxyethylacrylate‐co‐methylacrylate) polymers as novel polymeric phase‐change materials (PCMs) were synthesized starting from 2‐hydroxyethylacrylate and fatty acids. The chemical structure and crystalline morphology of the synthesized copolymers were characterized with Fourier transform infrared and ¹H‐NMR spectroscopy and polarized optical microscopy, respectively, and their thermal energy storage properties and thermal stability were investigated with differential scanning calorimetry and thermogravimetric analysis, respectively. The thermal conductivities of the PCMs were also measured with a thermal property analyzer. Moreover, thermal cycling testing showed that the copolymers had good thermal reliability and chemical stability after they were subjected to 1000 heating/cooling cycles. The synthesized poly(2‐alkyloyloxyethylacrylate) polymers and poly(2‐alkyloyloxyethylacrylate‐co‐methylacrylate) copolymers as novel PCMs have considerable potential for thermal energy storage and temperature‐control applications. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

NMR study of poly(vinylpyrrolidone)/poly(ethylene oxide) blends

Development of polymeric blends has become very important for polymer industries because they have been shown to be successful and versatile alternatives to obtain new polymers. In this work binary blends formed by poly(vinylpyrrolidone) (PVP) and poly(ethylene oxide) (PEO) were studied by solution and solid‐state NMR to determine their physical interaction, homogeneity, and compatibility for use as membranes to separate water/alcohol. The NMR results allowed us to acquire information on the microstructure and molecular dynamic behavior of polymer blends. From the NMR solution it was possible to evaluate the microstructure: PVP presented a preferential syndiotactic distribution sequence and PEO presented two regions, one crystalline and the other amorphous. Considering the solid‐state NMR results it was possible to evaluate the molecular dynamics and all binary blends, showing that PEO behaves as a plasticizer; some intermolecular interaction was also observed. An important point was to evaluate the microstructure of the carbonyl PVP using cross polarization/magic‐angle spinning (CP/MAS) and CP/MAS/dipolar decoupling that was not observed before. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2820–2823, 2002