Development of stabilized itraconazole nanodispersions by using high-gravity technique

Purpose: For large scale preparation of stabilized itraconazole (ITZ) nanodispersions to improve the dissolution rate.

Method: High-gravity technique was employed to produce ITZ nanodispersions.

Results: Stabilizer had a significant effect on the stability of drug nanoparticles. Hydroxypropylmethylcellulose was found to be the most effective stabilizer to prevent drug nanoparticles from aggregation. ITZ nanoparticles with an average size of 210?nm were obtained. Mannitol was the suitable carrier matrix for improving the flowability and the dissolution rate of ITZ nanodispersion. The effects of operating variables on the particle size distribution were investigated in detail. The stability of ITZ nanodispersions was characterized by scanning electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, differential scanning calorimetry, and in vitro dissolution studies. After 6 months storage, the nanodispersion showed unchanged particles size, morphology, crystal state, chemical structure, and dissolution. In vitro dissolution rate indicated that the nanodispersion could significantly enhance the dissolution rate when compared to the commercial available Sporanox capsules. The nanodispersion achieved 70% of drug dissolution in 10?min, whereas the Sporanox capsules only dissolved 20% during the same period.

Conclusion: This study demonstrated that high-gravity technique is a promising method for large scale production of nanodispersions to enhance the dissolution rate of poorly water-soluble drugs.     

In-vitro and in-vivo study of amorphous spironolactone prepared by adsorption method using supercritical CO2

Objective: The aim of this study was to improve the oral bioavailability of spironolactone (SP).

Method: SP was adsorbed on the fumed silica using supercritical CO₂ (scCO₂) technology and further compressed into tablets. The morphology was observed by scanning electron microscopy (SEM), and the crystalline form was investigated by differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). The dissolution test was performed in water, 0.1?M HCl solution, pH 4.5 acetate buffers and pH 6.8 phosphate buffers using the paddle method. The pharmacokinetics was undertaken in six dogs in a crossover fashion.

Results: SP was successfully prepared into tablets and presented in amorphous state. SP-silica scCO₂ tablets displayed higher dissolution profiles than SP-silica physical mixtures tablets in different media. The AUC_0–t and C_max of SP-silica supercritical CO₂ was 1.61- and 1.52-fold greater than those of SP-silica physical mixtures (p?Conclusion: It is a promising method in improving dissolution and bioavailability by adsorbing SP, a poorly soluble drug, on the fumed silica using rapid expansion of supercritical solutions.     

Synthesis and in vitro release study of ibuprofen-loaded gelatin graft copolymer nanoparticles

Objective: This work deals with the preparation, characterization and in vitro release study of IBU-loaded gel graft copolymer nanoparticles.

Method: Gelatin (Gel) graft copolymer nanoparticles were prepared using styrene (Sty) and/or 2-hydroxyethyl methacrylate (HEMA) monomers in the presence of potassium persulfate and glutaraldehyde as an initiator and cross-linker, respectively. The prepared nanoparticles as sustained release drug carriers were investigated using the nonsteriodal anti-inflammatory model drug, ibuprofen (IBU).

Results: The prepared nanoparticles as sustained release drug carriers were investigated using the nonsteriodal anti-inflammatory model drug, IBU. The prepared Gel/HEMA and Gel/Sty nanoparticles exhibited particles size ranging from 15 to 17?nm and from 0.42 to 5?mm, respectively. The dissolution of IBU in phosphate buffer, pH 7.4, at 37°C from the prepared nanoparticles was evaluated using UV spectroscopy. In addition, the prepared nanoparticles were characterized using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), transmitting electron microscope (TEM) and zeta potential/particle size analyzer. In vitro dissolution study showed that the dissolution rates of the crosslinked nanoparticles were retarded relative to the uncrosslinked ones. Moreover, the released amount constantly decreases with increasing gluteraldehyde content in the gel nanoparticles.

Conclusion: Crosslinked gel-based graft copolymers exhibited slow IBU release within six hours. Furthermore, results from different characterization techniques such as TEM, particles size and zeta potential measurements confirmed the formation of pH-responsive gel-graft copolymer nanoparticles.     

Preparation of azithromycin nanosuspensions by reactive precipitation method

Purpose: The aim of this work was to prepare azithromycin (AZI) nanosuspensions to increase the solubility and dissolution rate.

Method: AZI nanosuspensions were prepared by the combination of reactive precipitation and freeze-drying in presence of biocompatible stabilizer. Formulation and process variables affecting the characteristics of nanosuspensions were optimized. Various tests were carried out to study the physicochemical characteristics of AZI nanosuspensions.

Results: The nanosuspensions were parenterally acceptable and autoclavable, because soybean lecithin was the stabilizer of choice and no organic solvents were used during the preparation. The mean particle size and zeta potential of the AZI nanosuspensions were about 200?nm (±20?nm) and ?36.7 mV (±7.6 mV), respectively. Solid nanoparticles were obtained by lyophilization of the nanosuspensions and nanosuspensions rapidly reconstituted when the nanoparticles were dispersed in water. X-ray diffraction and differential scanning calorimetry analysis showed that the crystal state of nanoparticles was amorphous. Solubility and in vitro release studies indicated that the saturated solubility and dissolution rate increased obviously in comparison of raw AZI. The nanoparticles were physically stable over a period of 5 months as demonstrated by unchanged crystallinity and stable particle size when stored at room temperature and protected from humidity.

Conclusion: The results suggested that reactive precipitation is an effective way to prepare AZI nanosuspensions with increased solubility and dissolution rate.     

Effect of X-ray exposure on the pharmaceutical quality of drug tablets using X-ray inspection equipment

Context: X-ray inspection equipment is widely used to detect missing materials and defective goods in opaque containers. Its application has been expanded to the pharmaceutical industry to detect the presence of drug tablets in aluminum foil press-through packaging. However, the effect of X-rays on the pharmaceutical quality of drug tablets is not well known.

Objective: In this study, the effect of X-rays on the pharmaceutical quality of drug tablets was investigated.

Methods: Exposure of acetaminophen, loxoprofen and mefenamic acid tablets to X-ray doses of 0.34?mGy (thrice the dose by X-ray scanning) to 300?Gy (maximum dose from our X-ray equipment) was demonstrated, and the samples were evaluated by formulation tests.

Results: Exposure to X-rays did not affect the pharmaceutical quality of the drug content. The samples exposed to X-rays exhibited almost the same profile in formulation tests (dissolution test, disintegrating test and hardness test) as control samples (0?Gy). The combination of X-ray exposure with accelerated temperature and humidity tests (six months) also did not affect the pharmaceutical quality. The color change of light-sensitive drugs (nifedipine and furosemide tablets) after X-ray exposure was negligible (Conclusion: The X-ray scanning and X-ray exposure under our experimental conditions did not affect the pharmaceutical quality of drug tablets.     

Insulin nanoparticles for transdermal delivery: preparation and physicochemical characterization and in vitro evaluation

Aim: This work is aimed to study the feasibility of insulin nanoparticles for transdermal drug delivery (TDD) using supercritical antisolvent (SAS) micronization process. Methods: The influences of various experimental factors on the mean particle size (MPS) of insulin nanoparticles were investigated. Moreover, the insulin nanoparticles obtained were characterized by scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and thermogravimetric (TG) analyses. Results: Under optimum conditions, uniform spherical insulin nanoparticles with a MPS of 68.2?±?10.8 nm were obtained. The Physicochemical characterization results showed that SAS process has not induced degradation of insulin. Evaluation in vitro showed that insulin nanoparticles were accorded with the Fick's first diffusion law and had a high permeation rate. Conclusion: These results suggest that insulin nanoparticles can have a great potential in TDD systems of diabetes chemotherapy.     

Successful factorial design for the optimization of methylprednisolone encapsulation in biodegradable nanoparticles

Abstract

Due to their crystalline nature, the encapsulation of hydrophobic corticosteroids within polymeric nanoparticles by o/w solvent evaporation method is often difficult to achieve. The aim of this study was to evaluate the effect of both process and formulation parameters on the encapsulation of a model corticosteroid: methylprednisolone (MP). For this purpose, a 3²factorial design was performed evaluating the effects of the concentration of emulsifiers and sonication time on the manufactured nanoparticles, followed by a multiresponse optimization. The study also included the evaluation of other parameters such as the type of organic solvent used, polymer characteristics and the initial mass of drug. The optimal nanoparticle formulation using 0.25% (w/v) of emulsifying agent (Polyvinyl-alcohol, PVA) and 5 min of sonication was then characterized. The highest encapsulation was obtained with an organic phase consisting of acetone: dichloromethane (1:1), polyD,L-lactide-co-glycolide (PLGA) 50:50 as polymer and an initial mass of 6.6 mg of methylprednisolone. Nanoparticles size and ζ potential of optimized formulation were respectively around 230 nm and ?14 mV. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) demonstrated that the drug was molecularly dispersed within the nanoparticles. Release study showed that MP-loaded nanoparticles sustained drug release for up to 120 h. This study reflects the importance of factorial design to optimize the manufacture of nanoparticles encapsulating hydrophobic drugs.     

Preparation of stable micron-sized crystalline irbesartan particles for the enhancement of dissolution rate

Purpose: In this study, micron-sized crystalline drug particles of irbesartan (IBS) were prepared to improve its stability and dissolution rate.

Method: The approach to crystalline particles was based on the liquid precipitation process by which the amorphous particles were prepared. Pharmaceutical acceptable additives were used as the crystallization agent to convert the amorphous drug into crystalline particles. High pressure homogenization (HPH) process has been employed to reduce the size of the crystalline particles, and the micron-sized particles were obtained by the freeze-drying process.

Results: Different additives show different influences on the polymorphic form of IBS. Polyvinylpyrrolidone (PVP) and hydroxypropyl methylcellulose (HPMC) were effective in stabilizing amorphous particles instead of converting amorphous drug into crystalline particles, while poloxamer407 (F127) and tween80 (T80) could convert the amorphous drug into crystalline particles. T80 was also effective in controlling the particle size than that of F127. After HPH, crystalline particles with an average of 0.8 μm were obtained. The freeze-dried micron-sized crystalline particles exhibited significantly enhanced in vitro dissolution rate when compared to the raw drug. SEM, FT-IR, XRD, DSC and dissolution rate studies indicated that the micron-sized particles were stable during 6 months storage.

Conclusion: The preparation of micron-sized crystalline drug particles is an effective way to improve the stability and dissolution rate of irbesartan.     

Glibenclamide-loaded self-nanoemulsifying drug delivery system: development and characterization

Objective: To develop and characterize self-nanoemulsifying drug delivery system (SNEDDS) of the poorly water-soluble drug, glibenclamide (GBD). Methods: Solubility of GBD was determined in various vehicles. Phase diagrams were constructed to identify efficient self-emulsification region using oils, surfactants, and cosurfactants in aqueous environment. Formulations were assessed for drug content, spectroscopic clarity, emulsification time, contact angle, zeta potential, particle size, and dissolution studies. On the basis of similarity and dissimilarity of particle size distribution, formulations were further characterized using principal component analysis and agglomerative hierarchy cluster analysis. Results: Among the formulations prepared and evaluated, optimized formulation showed mean particle size between 15.65 and 32.70 nm after 24 hour postdilution in various media. Dilution volume had no significant effect on particle size. Transmission electron microscopy of these formulations confirmed the spherical shape of globules with no signs of coalescence of globules and precipitation of drug. The relevance of difference in t50% and percent dissolution efficiency were evaluated statistically by two-way ANOVA. Infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction studies indicated compatibility between drug, oil, and surfactants. Conclusions: The results of this study indicate that the self-nanoemulsifying drug delivery system of GBD, owing to nanosize, has potential to enhance its absorption and without interaction or incompatibility between the ingredients.     

Pharmacokinetic and pharmacodynamic studies of nisoldipine-loaded solid lipid nanoparticles developed by central composite design

Abstract

Objective: Nisoldipine (ND) is a potential antihypertensive drug with low oral bioavailability. The aim was to develop an optimal formulation of ND-loaded solid lipid nanoparticles (ND-SLNs) for improved oral bioavailability and pharmacodynamic effect by using a two-factor, three-level central composite design. Glyceryl trimyristate (Dynasan 114) and egg lecithin were selected as independent variables. Particle size (Y₁), PDI (Y₂) and entrapment efficiency (EE) (Y₃) of SLNs were selected as dependent response variables.

Methods: The ND-SLNs were prepared by hot homogenization followed by ultrasonication. The size, PDI, zeta potential, EE, assay, in vitro release and morphology of ND-SLNs were characterized. Further, the pharmacokinetic (PK) and pharmacodynamic behavior of ND-SLNs was evaluated in male Wistar rats.

Results: The optimal ND-SLN formulation had particle size of 104.4?±?2.13?nm, PDI of 0.241?±?0.02 and EE of 89.84?±?0.52%. The differential scanning calorimetry and X-ray diffraction analyses indicated that the drug incorporated into ND-SLNs was in amorphous form. The morphology of ND-SLNs was found to be nearly spherical by scanning electron microscopy. The optimized formulation was stable at refrigerated and room temperature for 3 months. PK studies showed that 2.17-fold increase in oral bioavailability when compared with a drug suspension. In pharmacodynamic studies, a significant reduction in the systolic blood pressure was observed, which sustained for a period of 36?h when compared with a controlled suspension.

Conclusion: Taken together, the results conclusively demonstrated that the developed optimal ND-SLNs caused significant enhancement in oral bioavailability along with pharmacodynamic effect.     

Preparation,Characterization, and Dissolution Studies of Ibuprofen Solid Dispersions Using Polyethylene Glycol (PEG), Talc,and PEG-Talc as Dispersion Carriers

Abstract

Solid dispersions of ibuprofen (IBF) were prepared by solvent evaporation method using polyethylene glycol 10000 (PEG), talc, and PEG-talc as dispersion carriers. The drug-carrier(s) interactions in the solid state were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and x-ray diffraction analysis. Interactions in the solution were studied by performing dissolution experiments. No important and well-defined chemical interaction was found between the ingredients. The increase in the IBF dissolution rate from the solid dispersions with the carriers used in this study could be attributed to several factors such as improved wettability, local solubilization, and drug particle size reduction.     

Development of a solid self-microemulsifying drug delivery system (SMEDDS) for solubility enhancement of naproxen

Context: Comparative evaluation of liquid and solid self-microemulsifying drug delivery systems (SMEDDS) as promising approaches for solubility enhancement.

Objective: The aim of this work was to develop, characterize, and evaluate a solid SMEDDS prepared via spray-drying of a liquid SMEDDS based on Gelucire® 44/14 to improve the solubility and dissolution rate of naproxen.

Material and methods: Various oils and co-surfactants in combination with Gelucire® 44/14 were evaluated during excipient selection study, solubility testing, and construction of (pseudo)ternary diagrams. The selected system was further evaluated for naproxen solubility, self-microemulsification ability, and in vitro dissolution of naproxen. In addition, its transformation into a solid SMEDDS by spray-drying using maltodextrin as a solid carrier was performed. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to evaluate the physical characteristics of the solid SMEDDS obtained.

Results: The selected formulation of SMEDDS was comprised of Miglyol 812®, Peceol?, Gelucire® 44/14, and Solutol® HS 15. The liquid and solid SMEDDS formed a microemulsion after dilution with comparable average droplet size and exhibited uniform droplet size distribution. In the solid SMEDDS, liquid SMEDDS was adsorbed onto the surface of maltodextrin and formed smooth granular particles with the encapsulated drug predominantly in a dissolved state and partially in an amorphous state. Overall, incorporation of naproxen in SMEDDS, either liquid or solid, resulted in improved solubility and dissolution rate compared to pure naproxen.

Conclusion: This study indicates that a liquid and solid SMEDDS is a strategy for solubility enhancement in the future development of orally delivered dosage forms.     

Synthesis of β-cyclodextrin hydrogel nanoparticles for improving the solubility of dexibuprofen: characterization and toxicity evaluation

Objective: This study was aimed to enhance aqueous solubility of dexibuprofen through designing β-cyclodextrin (βCD) hydrogel nanoparticles and to evaluate toxicological potential through acute toxicity studies in rats.

Significance: Dexibuprofen is a non-steroidal analgesic and anti-inflammatory drug that is one of safest over the counter medications. However, its clinical effectiveness is hampered due to poor aqueous solubility.

Methods: βCD hydrogel nanoparticles were prepared and characterized by percent yield, drug loading, solubilization efficiency, FTIR, XRD, DSC, FESEM and in-vitro dissolution studies. Acute oral toxicity study was conducted to assess safety of oral administration of prepared βCD hydrogel nanoparticles.

Results: βCD hydrogel nanoparticles dramatically enhanced the drug loading and solubilization efficiency of dexibuprofen in aqueous media. FTIR, TGA and DSC studies confirmed the formation of new and a stable nano-polymeric network and interactions of dexibuprofen with these nanoparticles. Resulting nanoparticles were highly porous with 287?nm in size. XRD analysis revealed pronounced reduction in crystalline nature of dexibuprofen within nanoparticles. Release of dexibuprofen in βCD hydrogel nanoparticles was significantly higher compared with dexibuprofen tablet at pH 1.2 and 6.8. In acute toxicity studies, no significant changes in behavioral, physiological, biochemical or histopathologic parameters of animals were observed.

Conclusions: The efficient preparation, high solubility, excellent physicochemical characteristics, improved dissolution and non-toxic βCD hydrogel nanoparticles may be a promising approach for oral delivery of lipophilic drugs.     

Preparation of drug nanocrystals embedded in mannitol microcrystals via liquid antisolvent precipitation followed by immediate (on-line) spray drying

The aim of this study is to investigate the feasibility of producing pharmaceutical nanoformulations for enhanced oral or pulmonary delivery of poorly water-soluble drugs via liquid antisolvent precipitation followed by immediate (on-line) spray drying. A poorly water-soluble corticosteroid, budesonide, was chosen as the model drug. Budesonide nanoparticles were prepared through liquid antisolvent precipitation, and then processed into a powdered nanoformulation which consists of budesonide nanoparticles embedded in mannitol microcrystals by immediate (on-line) spray drying. The size of the freshly precipitated and the reconstituted budesonide particles was analyzed by dynamic light scattering (DLS). The spray-dried nanoformulation, together with budesonide and mannitol raw materials, their physical mixture and the spray-dried mannitol, were characterized by field emission scanning electron microscopy (FESEM), differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD). In vitro dissolution test and aerosol deposition study were conducted on the spray-dried nanoformulation and the physical mixture of budesonide and mannitol raw materials. It was found that the spray-dried nanoformulation, consisting of mannitol microcrystals comprising budesonide nanocrystals with z-average mean size of 520?±?11.4?nm, exhibited enhanced drug dissolution rate and higher fine particle fraction (FPF). The results of this study indicated the potential of the combined process of liquid antisolvent precipitation followed by immediate (on-line) spray drying to be used as a direct and continuous formulation process to produce powdered nanoformulations to achieve enhanced oral or pulmonary delivery of poorly water-soluble drugs.     

The investigation of MCM-48-type and MCM-41-type mesoporous silica as oral solid dispersion carriers for water insoluble cilostazol

Objective: To explore the suitable application of MCM-41 (Mobil Composition of Matter number forty-one)-type and MCM-48-type mesoporous silica in the oral water insoluble drug delivery system.

Methods: Cilostazol (CLT) as a model drug was loaded into synthesized MCM-48 (Mobil Composition of Matter number forty-eight) and commercial MCM-41 by three common methods. The obtained MCM-41, MCM-48 and CLT-loaded samples were characterized by means of nitrogen adsorption, thermogravimetric analysis, ultraviolet-visible spectrophotometry, scanning electron microscopy, transmission electron microscopy, differential scanning calorimetry and powder X-ray diffractometer.

Results: It was found that solvent evaporation method was preferred according to the drug loading efficiency and the maximum percent cumulative drug dissolution. MCM-48 with 3D cubic pore structure and MCM-41 with 2D long tubular structure are nearly spherical particles in 300–500?nm. Nevertheless, the silica carriers with similar large specific surface areas and concentrating pore size distributions (978.66?m²/g, 3.8?nm for MCM-41 and 1108.04?m²/g, 3.6?nm for MCM-48) exhibited different adsorption behaviors for CLT. The maximum percent cumulative drug release of the two CLT/silica solid dispersion (CLT-MCM-48 and CLT-MCM-41) was 63.41% and 85.78% within 60?min, respectively; while in the subsequent 12?h release experiment, almost 100% cumulative drug release were both obtained. In the pharmacokinetics aspect, the maximum plasma concentrations of CLT-MCM-48 reached 3.63?mg/L by 0.92?h. The AUC_0–∞ values of the CLT-MCM-41 and CLT-MCM-48 were 1.14-fold and 1.73-fold, respectively, compared with the commercial preparation.

Conclusion: Our findings suggest that MCM-41-type and MCM-48-type mesoporous silica have great promise as solid dispersion carriers for sustained and immediate release separately.     

Application and functional characterization of POVACOAT,a hydrophilic co-polymer poly(vinyl alcohol/acrylic acid/methyl methacrylate) as a hot-melt extrusion carrier

Objective: The aim of this study was to evaluate the applicability of POVACOAT^TM, a hydrophilic PVA copolymer, as a solid dispersion (SD) carrier for hot-melt extrusion (HME).

Methods: Bifendate (DDB), a water-insoluble drug, was chosen as the model drug. DDB was hot-melt extruded by a co-rotating twin screw extruder with POVACOAT^TM. The SD formability of POVACOAT^TM was investigated by varying the composition ratios. Solid state characterization was evaluated by differential scanning calorimetry, powder X-ray diffraction, scanning electron microscopy and Fourier transformation infrared spectroscopy. In order to have a better knowledge of the mechanism of dissolution enhancement, dissolution study, phase solubility study and crystallization study of DDB from supersaturated solutions were performed. In addition, the storage stability of the extrudate containing 10% DDB was investigated.

Results: Physical characterizations showed that DDB was amorphous up to 15% drug loading. The phase solubility study revealed an A_L-type curve. Moreover, POVACOAT^TM was found to have an inhibitory effect on crystallization from supersaturated solutions. Compared with the pure DDB and physical mixture, the dissolution rate and solubility of extrudates were significantly enhanced and the drug loading markedly affected the dissolution of SDs. Furthermore, the stability test indicated that 10% DDB-SD was stable during storage (40?°C/75% RH).

Conclusion: The results of this study demonstrate that POVACOAT^TM is a valuable excipient for the formulation of solid dispersions prepared by HME to improve dissolution of poorly water-soluble drugs.     

Application of scCO2 technology for preparing CoQ10 solid dispersion and SFC-MS/MS for analyzing in vivo bioavailability

Objective: In this study, solid dispersion (SD) for oral delivery of a poorly water-soluble drug, coenzyme Q10 was developed by supercritical fluid technology and characterized in vitro and in vivo.

Methods: Dissolution was used to optimize the formulations of CoQ10-SD. The physicochemical properties of SD were investigated by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM). The supercritical fluid chromatography–electrospray ionization tandem mass spectrometry (SFC–ESI-MS/MS) was used for the in vivo study.

Results: The results of DSC and PXRD indicated that the drug in SD was in amorphous state. In vitro drug release, the dissolution of coenzyme Q10 in solid dispersion improved to 78.8% compared with commercial tablets of 0.16%. The area under c–t curve (AUC_0–72h) and mean maximum concentrations (C_max) of CoQ10-SD were 2.43-fold and 3.0-fold, respectively higher than that of commercial tablets in rats, confirming improved bioavailability.

Conclusion: Supercritical fluid technology was successfully used for the preparation and analysis of CoQ10-SD for the first time and significantly improved the dissolution and bioavailability of coenzyme Q10.     

Effects of spray drying process parameters on the solubility behavior and physical stability of solid dispersions prepared using a laboratory-scale spray dryer

Purpose: The purpose of this study is to determine the process parameters of the laboratory-scale spray dryer affecting the solubility behavior and physical stability of solid dispersions.

Methods: Solid dispersions of the model drug (nilvadipine or nifedipine) and hypromellose (HPMC) (w/w: 1/1) were prepared using the laboratory-scale spray dryer. As process parameters, nitrogen flow rate, sample concentration and pump speed were investigated. The samples were characterized by dissolution tests, powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscope (SEM), and nanoscale thermal analysis (Nano-TA). The physical stability was monitored after 7 months storage at 25°C.

Results: Solubility behavior and physical stability were improved by setting the low nitrogen flow rate and high sample concentration. DSC showed that the physical state depends on the spray drying conditions, whereas, every sample showed the similar morphology from SEM results. The difference of solubility behavior and physical stability were found to come from the microstructural phase separation of the spray dried particles using a novel analytical technique (Nano-TA).

Conclusions: This study demonstrated that nitrogen flow rate and sample concentration should be the critical parameters for the enhancements of the solubility and physical stability of solid dispersions.     

Crystal engineering to improve physicochemical properties of mefloquine hydrochloride

Background: Pharmaceutical cocrystallization is a promising alternative for improving the solubility and dissolution rate or manipulating other physical properties of active pharmaceutical ingredients. The objective of this investigation was to study the effect of cocrystallization with different cocrystal formers on physicochemical properties of mefloquine hydrochloride. Method: Cocrystals were prepared by solution crystallization method – mefloquine hydrochloride (414.8 mg, 1 mmol) and different cocrystal formers (1/2 mmol) were dissolved in 20 mL of ethanol with warming. Solution was cooled in ice bath for 6 hours. The crystals were isolated by filtration through a membrane (0.45 μm) and dried in the air. The pure drug and the prepared cocrystals were characterized in terms of saturation solubility, drug content, infrared spectroscopy, differential scanning calorimetry, powder X-ray diffraction, scanning electron microscopy, in vitro dissolution studies, and stability studies. Results: The cocrystals showed enhanced solubility and dissolution rate. The cocrystals were found to be stable over the period of 6 months confirmed from stability studies. Conclusion: Cocrystals resist the conversion of anhydrous form of drug into its hydrate which is responsible for the drugs less solubility and dissolution rate.     

Enhanced dissolution and bioavailability of grapefruit flavonoid Naringenin by solid dispersion utilizing fourth generation carrier

Context: Naringenin (NRG), the aglycone flavonoid present in grapefruits, possesses anti-inflammatory, anti-carcinogenic, anti-lipid peroxidation and hepato-protective effects. However, it is poorly soluble in water and exhibits slow dissolution after oral ingestion, thus restricting its therapeutic efficacy.

Objective: With the aim to enhance the dissolution rate and oral bioavailability of NRG, solid dispersion technique has been applied using Soluplus® as carrier.

Methods: Solid dispersions of NRG were prepared by solvent evaporation and kneading methods using various ratios (1:4, 3:7, 2:3 and 1:1) of NRG:Carrier. Characterization of the optimized formulations was performed using Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. The in vivo behavior of the optimized formulations was also investigated in Wistar Albino rats.

Results: NRG solid dispersion showed a significantly higher solubility and drug dissolution rate than pure NRG (p?Conclusion: Based on these results, it was concluded that solid dispersion technique markedly enhances the in vitro drug release and in vivo behavior of the grapefruit flavonoid NRG.