共查询到20条相似文献,搜索用时 62 毫秒
1.
坚强智能电网建设需要可靠的通信信息平台。借助电力光纤到户,电网公司通过与其他运营商的合作,对于推进三网融合的发展具有重要意义。文章介绍了智能电网与三网融合的关系,探讨了电力与各运营商在网络平台建设中的运作模式。 相似文献
2.
3.
我国统一坚强智能电网建设综述 总被引:3,自引:2,他引:1
为了更好地服务国家经济社会发展,巩固和提升我国电网的技术领先水平和国际竞争力,国家电网公司提出了建设中国特色统一坚强智能电网的战略发展思路.介绍国内外智能电网发展历程,我国统一坚强智能电网发展战略和路线,以及智能电网发电、输电、变电、配电、用电、调度、通信信息等环节的发展目标和技术路线. 相似文献
4.
智能电网建设是国内外电网发展的必然趋势,对智能电网的含义及特性进行了阐述,对国内外智能电网的发展及建设情况进行了总结,同时对国家电网公司建设智能电网的目标进行了介绍。指出发展中国特色坚强的智能电网是我国应对未来电网发展所面临的新形势构建稳定、经济、清洁、安全的现代能源供应体系的客观需求,是适应中国国情满足未来各方面发展需求的战略性选择,对保障我国经济社会和谐发展具有重要意义。 相似文献
5.
在城市化进程加快、电源建设突飞猛进的前提下,国家建设大容量坚强智能电网是必然的选择。近几年大量资金投入到电网建设和改造中,既是应对国际金融危机需要,更是我国经济发展和电力发展的需要。最近国家电网公司宣布,到2020年完成电网智能化建设,这必将进一步推动电网设备的技术改造。这就是我国高压开关设备市场快速发展的背景。 相似文献
6.
正为打造世界一流的能源互联网企业,国家电网公司2019年工作会议正式提出在坚强智能电网基础上建设泛在电力物联网,共同构成能源流、业务流、数据流"三流合一"的能源互联网。推进"三型两网"建设,是践行习近平新时代中国特色社会主义思想的担当之举,是主动适应能源革命和数字革命融合发展的必由之路,也是主动适应电力改革和国企改革纵深推进的根本要求。建设运营好"两网"——坚强智能电网、泛在电力物联网,是建设世界一流能源互联网企业的重要物质基础,是落实"三型两网、世界一流"战略目标的核心任务。泛在电力物联网是新时代国家电网信息化发展的新战略,是与坚强智能电网协同并进、相辅相成、融合发展,具有智慧化、多元化、生态化特征的"第二张网",是多方参与、合作共赢、开放共享的产业生态,是 相似文献
7.
8.
发展智能电网对我国社会经济的发展具有重要的意义。发展智能电网,使得电网功能逐步扩展到促进能源资源优化配置、保障电力系统安全稳定运行、提供多元开放的电力服务、推动战略性新兴产业发展等多个方面。同时,坚强智能电网建设运营的全过程都将为拉动国民经济发展及改变经济发展方式、能源生产利用和保障能源安全、保护环境及减少对化石能源的依赖等方面带来巨大效益。 相似文献
9.
10.
智能电网已成为当今世界电力系统发展变革的最新趋势,我国建设坚强智能电网已势在必行,电力培训中心作为电网公司培养电力高技能人才的重要培训机构,需要主动适应电网发展的新趋势,不断完善实训基地,拓展新兴培训项目。 相似文献
11.
12.
电站锅炉停用保护剂多采用十八胺和表面活性胺。对这2种停用保护剂进行了应用效果对比研究,即对湿冷机组、空冷机组采用十八胺或表面活性胺、有无凝结水精处理系统等6台机组停机和启动过程中给水、主蒸汽和凝结水的氢电导率变化情况进行分析。研究结果表明:在停机过程和启动过程,2种保护剂均会在水汽系统中发生部分分解,导致水汽系统的氢电导率显著升高;表面活性胺和十八胺比较,使用前者,机组启停机过程可保持凝结水精处理系统正常投运,因而可使水汽质量迅速达标,对机组安全运行有利,因此推荐采用表面活性胺作为锅炉停用保护剂。 相似文献
13.
特高压线路工频参数测试干扰分析是选择适合工频参数测试方法及测试结果分析的重要基础。测试了1 000 kV皖南-浙北特高压线路正序和零序参数测试期间的干扰电压信号,分析了其频谱特征;在此基础上,通过与正序参数仿真计算值的对比分析了正序参数实际测试偏差。结果表明:皖南-浙北特高压同塔双回线路工频参数测试期间,干扰电压存在“三相不平衡性及时变性”的特点;工频法和异频法2种不同方法得到的线路参数测试结果存在一定差异;干扰电压“时变”时,线路工频参数测试宜采用异频法。 相似文献
14.
15.
《国外电子测量技术》2014,(10)
正Qingdao,China7.16-19,2015The International Conference on Electronic MeasurementInstruments(ICEMI)is the world’s premier conference dedicated to the electronic measurement and test of devices,boards and systems that is covering the complete cycle from design,verification,test,diagnosis,failure analysis and process of manufactory and products 相似文献
16.
17.
《国外电子测量技术》2014,(9)
正Qingdao,China7.16-19,2015The International Conference on Electronic MeasurementInstruments(ICEMI)is the world's premier conference dedicated to the electronic measurement and test of devices,boards and systems that is covering the complete cycle from design,verification,test,diagnosis,failure analysis and process of manufactory and products 相似文献
18.
Cuba’s electric sector is approaching an inflection point. Although the country has historically relied upon non-commercial barter agreements for imported oil to meet its electric demand, a combination of factors including reducing imports, increasing demand, and ambitious climate change goals suggest new pathways forward may be warranted. The way Cuba responds to near- and long-term challenges will help set the stage for its energy future. This article describes Cuba's electric sector and provides a set of key recommendations to consider going forward. 相似文献
19.
S. Y. Wu B. N. Tran F. Y. Davis C. L. Trent D. L. Edberg W. A. Geideman 《Integrated ferroelectrics》2013,141(3):281-291
Abstract Smart materials of lead-zirconate-titanate (PZT) piezoelectric ceramics have attracted attention in recent years for active vibration control, acoustic noise suppression, health monitoring and damage assessment. We at McDonnell Douglas Aerospace have been studying these ceramics for use as sensors and actuators in various space and aircraft structures. In this paper, we will report results of a recent study on active vibration control using monomorph PZT actuators. The experiments were performed on thin aluminum cantilever beams. Collocated and non-collocated sensors and actuators were employed. Two control techniques: the classical velocity feedback and adaptive feedback controls, were investigated. We have obtained significant damping and broadband vibration attenuation of greater than 30 dB using the classical control with the single-input single-output feedback approach. A 24 dB reduction has also been achieved using the adaptive control with the multiple-input single-output approach. Detailed experimental methods and results will be described. 相似文献