Broadcast digital subscriber lines

The adoption of asymmetrical digital subscriber lines (ADSL) technology in conjunction with the broadcast digital subscriber lines (BDSL) proposed in this paper could provide a cost effective solution for the introduction of digital video services in the near term. BDSL provides the same digital broadcast video programs to all subscribers through existing twisted pair telephone loops. In this paper, the basics of telephone loop-based digital subscriber lines are first discussed. Then the potential of BDSL is explored in the twisted pair loop plant near end crosstalk (NEXT), far end crosstalk (FEXT), and white noise environment. The capability of BDSL is examined with different serving areas and transmit power levels. The possibility of using orthogonal quadrature amplitude modulation (QAM) to implement a zero guard-band BDSL system is studied. Computer BDSL performance simulations are then presented. The combination of high-bit-rate digital subscriber lines (HDSL), ADSL, and BDSL can provide telephone subscribers many digital broadband services     

Crosstalk identification in xDSL systems

Crosstalk among telephone lines in the same or neighboring bundles is a major impairment in current xDSL systems. This paper proposes a novel idea of an impartial third party that identifies the crosstalk coupling functions among the twisted pairs in these xDSL systems. The crosstalk identification technique includes the following four major procedures: (1) the transmitted and received signals from each DSL modem for a predefined time period are collected and sent to the third party; (2) the signals are resampled according to the clock rate of the receiver of interest; (3) the signals' timing differences are estimated by cross correlation; and (4) the crosstalk coupling functions are estimated using the least-squares method. The performance of the cross correlation and least-squares methods is analyzed to determine the amount of data needed for identification. Simulation results show that the proposed methods can identify the crosstalk functions accurately and are consistent with theoretical analysis. These identified crosstalk functions can be used to significantly improve the data rate (e.g., multiuser detection) and to facilitate provisioning, maintenance, and diagnosis of the xDSL systems     

Advanced DSL management

Today's digital subscriber line deployments are often conservatively engineered to function in a statistically worst case environment. Crosstalk is treated as unknown and uncontrollable random noise, even though it is manmade. Other impairments are often treated by simply adding margin to crosstalk. While this simplistic practice currently suffices, it often provisions unnecessarily low bit rates. This article shows methods that can increase these bit rates and decrease DSL failure rates. Data can be collected about individual telephone lines and cables from loop databases, by automated test equipment, or from DSL modems. This data may then be fed into an advanced DSL management system with a database of DSL loop and noise characteristics, and an analysis engine that tailors DSL deployments to the actual individual line characteristics, to increase provisioned DSL bitrates while simultaneously increasing reliability and lowering maintenance costs. The maximum service can be provisioned with high accuracy, eliminating many service activation failures. Automated maintenance routines can even isolate faults before a customer experiences them. Dynamic spectrum management (DSM) treats crosstalk as the manmade noise it is, and jointly optimizes DSL transmit spectra and signals to minimize crosstalk and maximize received signals, allowing substantially higher DSL speeds than current practice. This opens the door for new services, including symmetric enterprise services and full video service, with minimal physical plant upgrade.     

低压电力线信道建模与蒙特卡洛模拟

在分析均匀传输线信道特性的基础上,引入二端口网络理论,分析低压电力线带负载信道的传输特性。采用二端口网络理论的T参数传输矩阵建立了低压电力线信道传输模型,然后利用蒙特卡洛方法建立仿真模型。模型从不同负载特性、不同接入或撤出负载变化量、不同传输信号频率对信号的影响分别进行了仿真和分析。仿真结果表明,采用二端口网络理论建立起的信道模型是可行的;采用蒙特卡洛数值模拟方法模拟低压电力线带负载信道是除了实际测试信道之外又一个可以借鉴的方法。     

Suppression of near- and far-end crosstalk by linear pre- andpost-filtering

Full-duplex data communication over a multi-input/multi-output linear time-invariant channel is considered. The minimum mean square error (MMSE) linear equalizer is derived in the presence of both near- and far-end crosstalk and independent additive noise. The MMSE equalizer is completely specified in terms of the channel and crosstalk transfer functions by using a generalization of previous work due to Salz (1985). Conditions are given under which the equalizer can completely eliminate both near- and far-end crosstalk and intersymbol interference. The MMSE transmitter filter, subject to a transmitted power constraint, is specified when the channel and crosstalk transfer functions are bandlimited to the Nyquist frequency. Also considered is the design of MMSE transmitter and receiver filters when the data signals are arbitrary wide-sense stationary continuous or discrete-time signals, corresponding to the situation where the crosstalk is not phase-synchronous with the desired signal     

Subscriber Line Equipment for an Elastic Carrier Switching System

This is the third of three papers [l], [2] dealing with an elastic carrier-concentrator system. The functioning of the subscriber line equipment is described herein. The system serves 256 telephone subscriber lines by digital concentration switching and transmission of multiplexed message channels over a singleT1transmission line. The concentration switching function is nonblocking. Message channels are the individual communication links between terminals and are created on demand at the request of active subscriber lines. They are not merely inactive without service requests; they do not exist unless service is requested. The created message channels serve for their normal communication function and, in addition, carry for each line the ancillary functions of dialing, ringing, and pay-station coin disposal. Message channels are coded by delta modulation, which permits flexible digital concentration and provides a smooth tradeoff of channel quality versus the instantaneous traffic load. Each of two complementary subscriber line interface units, one per line at each end, provides the delta-modulation encoding and decoding functions for the analog voice-band signal input and output and, by overriding the delta codec, provides the desired signaling functions of dialing, ringing, etc. The line interface units provide the major equipment interface between the subscriber line and the digitalT1line. An integral test facility permits remote loop-back of any selected subscriber line unit via a test channel to the office terminals and at the same time connects the subscriber loop to an auxiliary programmed test facility which may transmit pertinent loop-test results to the office terminal.     

高速数字电路PCB中串扰问题的研究与仿真

针对高速数字电路PCB中传输线间串扰的严重性,从精确分析PCB中串扰噪声的角度出发,在传统的双线耦合模型的基础上,采用了一种三线串扰耦合模型。该模型由两条攻击线和一条受害线组成,两条攻击线位于受害线的两侧,线间采取平行耦合的方式。利用信号完整性仿真软件Hyperlynx对受害线上的近端串扰噪声和远端串扰噪声进行了仿真。仿真结果表明,不同的传输模式和传输线类型、信号层与地平面的距离、耦合长度、传输线间距和信号上升/下降沿等因素会对受害线上的近端串扰和远端串扰产生较大的影响。在分析仿真结果的基础上,总结出了高速PCB设计中抑制串扰的有效措施,对高速数字电路设计有一定的指导意义。     

Time Compression Multiplexing for Loop Transmission of Speech Signals

This paper considers the use of time compression multiplexing (TCM) for telephone loop communications. The analysis treats TCM transmission degradations in general, and applies the results to telephone speech transmission. To gain an understanding of the nature of TCM degradations, transmission through a linear, time invariant network and demultiplexing is considered. The channel signals are then assumed to be wide-sense stationary random processes, and expressions for the spectral properties of the TCM distortion and interchannel crosstalk are determined. To accurately evaluate the performance of a TCM system, a practical and economical equalizer is proposed. It is designed to meet speech transmission requirements for the telephone loop plant. A worst case application is chosen to evaluate the system performance. The evaluation of the TCM transmission performance utilizes both the random signal model and a computer simulation using digitized speech. The random signal analysis shows that the spectra of the distortion and crosstalk are significant for human speech. Results of the digitized speech simulation demonstrate that the subjective effect of the signal distortion is not severe, but the crosstalk is somewhat intelligible and more severe than expected.     

Statistics of Wavelength Division Multiplexed Channels in Fiber-Optical Parametric Amplification

The amplification of wavelength division multiplexed (WDM) data in fiber-optical parametric amplifiers give rise to cross-gain saturation and four-wave mixing crosstalk. This crosstalk affects the data quality, especially at higher input powers. The statistics in this regime are nontrivial to obtain and we present, for the first time, a model based on a combination of theory and numerics that gives accurate statistics at a highly reduced computational cost. This model is obtained from an exact solution of WDM data being amplified in the strictly nonlinear regime which is derived in this paper. Using this model, predictions of the bit-error rate (BER) can be obtained even at very low rates impossible to reach by numerical methods alone. We show that there exists no trivial relationship between the BER and the commonly used quality measure, the Q-value. We also study how different amplifier parameters affect the statistics and suggest design rules to reduce channel crosstalk.     

Modal technique for the time domain analysis of crosstalk betweencoaxial cables

A study of current dominant coupling in a system comprising a large number of mutually coupled braided coaxial transmission lines is presented. An efficient model for the crosstalk is developed in the frequency domain using distributed circuit parameters and the concept of transfer impedance. The lines are assumed to be lossy and to have frequency-dependent per-unit-length parameters, and further losses due to the braided nature of the outer conductors are account for in the analysis. The validity of the coupling model is tested against measurements in the frequency domain before using fast Fourier transforms to evaluate the time domain responses     

Multichannel signal processing for data communications in thepresence of crosstalk

Transceiver designs for multiple coupled channels typically treat the crosstalk between adjacent twisted pairs as random noise uncorrelated with the transmitted signal. The authors propose a transmitter/receiver pair that compensates for crosstalk by treating an entire bundle of twisted pairs as a single multi-input/multi-output channel with a (slowly varying) matrix transfer function. The proposed transceiver uses multichannel adaptive FIR filters to cancel near- and far-end crosstalk, and to pre- and postprocess the input/output of the channel. Linear pre- and postprocessors that minimize mean squared error between the received and transmitted signal in the presence of both near- and far-end crosstalk are derived. The performance of an adaptive near-end crosstalk canceller using the stochastic gradient (least-mean-square) transversal algorithm is illustrated by numerical simulation. Plots of mean squared error versus time and eye diagrams are presented, assuming a standard transmission line model for the channel. A signal design algorithm that maps a vector input bit stream to a stream of channel symbol vectors is also presented and illustrated explicitly for s simple model of two coupled channels     

RF-TV叠加EPON系统中拉曼串扰的研究

采用等效系统传递函数法得出了1 490 nm数据光波对1 550 nm有线电视(CATV)光波拉曼串扰的理论计算公式,并用相对强度噪声指数(RIN)来表示拉曼串扰,修正了CATV通道载噪比(CNR)的计算公式.进行了实验验证.计算及实验结果表明,拉曼串扰与1 490 nm光功率有关,可使CATV系统低频端的(CNR)下跌5 dB,而且以太空闲字符码流会造成62.5 MHz及其倍频分量较大的单频干扰.指出了克服拉曼串扰的方法.     

Asymmetric digital subscriber line: interim technology for the nextforty years

The Internet has surfaced as the dominant early market for residential broadband. ADSL, a transmission system capable of realizing rates from 1 to Mb/s over existing telephone lines, fits Internet access requirements perfectly, and offers telephone companies a tool for connecting virtually all Internet users at megabit rates before the next century. ADSL is asymmetric-high-speed downstream, lower-speed upstream-to counteract speed limitations imposed by line length and crosstalk. The transmission technology itself has two essential forms, single-carrier and multicarrier, which must press Shannon's limit to squeeze so many bits through so little bandwidth. With complicated line coding and other features such as integral forward error correction and ATM/Ethernet mode interfaces, ADSL will be the most complex modem ever attached to a telephone line. This will not prevent ADSL from reaching consumer-level pricing within the next two years. We can expect some commercial deployment in 1997 and virtually ubiquitous availability by the end of 1999     

Time-domain response of multiconductor transmission lines

Evaluation of the time-domain response of multiconductor transmission lines is of great importance in the analysis of the crosstalk in fast digital circuit interconnections, as well as in the analysis of power lines. Several techniques for the computation of the line response, starting from the known circuit-theory parameters, are presented and evaluated. These methods are: time-stepping solution of the telegrapher equations, modal analysis in the time domain, model analysis in the frequency domain, and a convolution technique which uses line Green's functions. The last method can treat the most general case of lossy transmission lines with nonlinear terminal networks. Numerical and experimental results are presented to illustrate these techniques and to give insight into the crosstalk problems in fast digital circuits.     

Analysis of crosstalk between finite-length microstrip lines: FDTDapproach and circuit-concept modeling

Two approaches, one based on the circuit concept and the other based on field theory, are used to model the crosstalk between two microstrip lines of finite length and arbitrary orientation. In the circuit-concept modeling, a set of equations for the line voltages and currents has been derived from a modified telegrapher's equation. A four-port network expression is resultantly obtained by solving the equations, thus the crosstalk can be predicted by applying terminal conditions to the network expression. On the other hand, the extended finite-difference time-domain (FDTD) method has been used to model the terminal resistors and the feeding resistive voltage source in the crosstalk analysis. Several physical models have been fabricated and experiments performed. The calculated results are compared to measurements. In our experiment, for microstrip lines of finite length and arbitrary orientation, there are short line-sections or vias at each of the four ports, which should be incorporated into the crosstalk analysis. This effect has been investigated numerically and experimentally     

Optimal Discrete Bit Loading for DMT-Based DSL Systems With Equal-Length Loops

This letter examines a discrete bit-loading problem of upstream and downstream for discrete multitone digital subscriber lines with echo cancellation. Both far-end crosstalk and near-end crosstalk are taken into account. An optimal discrete bit-loading algorithm is developed when the loop lengths of all same-service users in a common binder are the same. Simulation results show that the optimal algorithm achieves a substantially higher data rate than existing suboptimal schemes.     

基于Simulink的钻井信息传输通道特性仿真

为利用钻杆有效地随钻传输地面与井下之间的数据。本文应用声波无缝传输模型将任意钻柱组合分解为单个声波无缝传榆模型级联方法．根据某单个典型钻具无缝传输模型系统函数的S参数和声波钻井信道的传输特性,推导了在信道通带内某一频点等效传输函数．在Simulink环境下仿真了该S参数的等效传输函数,并仿真了将双口网络S参数构成单钻具系统函数进行级联构成多个钻具的联接的系统函数。最后根据双口网络参数性质,多钻具级联的系统函数等效为各级T参数的连乘,将S参数转化为T参数,得到多个相同钻杆级联后的模型系统函数特性,仿真结果将对随钻声波传输仪器的方案设计提供有力的技术支持。     

The multitone channel

The maximum bit rate of multitone QAM (quadrature amplitude modulation) over a general linear channel is found. First, the overall bit rate for an AWGN channel with a two-level transfer function is maximized, using a multitone QAM system. The power distribution between the tones and the number of bits/symbol per tone is optimized for a given symbol error rate. Extending these results to the general channel, it is shown that the optimum power division for multitone signals is similar to the water-pouring solution of information theory. Furthermore, multitone QAM performance is about 9 dB worse than the channel capacity, independent of the channel characteristics. The multitone results throughout are compared to those of an equivalent single-tone linearly equalized system. The comparison shows that the multitone system is useful for some channels, e.g. those with deep nulls in the transfer function. The maximum bit error rate over a twisted-pair channel which is performance dominated by near-end crosstalk (NEXT) is also found     

Comparison of GTD propagation model wide-band path loss simulationwith measurements

The geometrical theory of diffraction (GTD) wedge diffraction has been used successfully in the GTD propagation model to predict narrowband continuous-wave (CW) radiowave propagation characteristics. The GTD propagation model uses a two-dimensional terrain profile approximated as piecewise-linear and computes reflection and diffraction effects with model output representing a complex approximation to the narrowband channel transfer function. Using the narrowband GTD model as a starting point, a wideband terrain-sensitive model has been developed which is capable of predicting wide-bandwidth propagation characteristics. The complex wideband channel transfer function calculated by the GTD model is transformed to the time domain by a fast Fourier transform (FFT). The results are then used to predict time-domain radio transmission loss in the form of a bandlimited approximation to the channel impulse response. Important channel parameters such as delay spread, and wideband received signal level can then be calculated. The GTD predicted results are put in a suitable format and compared with measurements obtained by SRI International