航天器自适应快速非奇异终端滑模容错控制

针对存在外部干扰、转动惯量矩阵不确定以及执行器故障的航天器姿态跟踪控制问题,本文提出了基于自适应快速非奇异终端滑模的有限时间收敛故障容错控制方案.通过引入能够避免奇异点,且具有有限时间收敛特性的快速非奇异终端滑模面,设计了满足多约束条件有限时间收敛的姿态跟踪容错控制律,利用参数自适应方法使控制器不依赖转动惯量和外部干扰的上界信息.Lyapunov稳定性分析表明:在存在外部干扰、转动惯量矩阵不确定以及执行器故障等约束条件下,本文设计的控制律能够保证闭环系统的快速收敛性,而且对执行器故障具有良好的容错性能.数值仿真校验了该控制律在姿态跟踪控制中的优良性能.     

Robust adaptive fixed‐time tracking control of 6‐DOF spacecraft fly‐around mission for noncooperative target

The fixed‐time relative position tracking and attitude synchronization control problem of a spacecraft fly‐around mission for a noncooperative target in the presence of parameter uncertainties and external disturbances is investigated. Firstly, a novel and coupled relative position and attitude motion model for a noncooperative fly‐around mission is established. Subsequently, a novel nonsingular fast terminal sliding mode (NFTSM) surface is developed, and the explicit estimation of the convergence time independent of initial states is provided. Fair and systematic comparisons among several typical terminal sliding modes show that the designed NFTSM has faster convergence performance than the fast terminal sliding mode. Then, a robust integrated adaptive fixed‐time NFTSM control law with no precise knowledge of the mass and inertia matrix and disturbances by combining the nonsingular terminal sliding mode technique with an adaptive methodology is proposed, which can eliminate the chattering phenomenon and guarantee that the relative position and attitude tracking errors can converge into the small regions containing the origin in fixed time. Finally, numerical simulations are performed to demonstrate the effectiveness of the proposed control schemes.     

动力定位船轨迹跟踪鲁棒自适应容错控制

本文研究了输入饱和状态下的动力定位船故障容错鲁棒自适应控制问题.该问题以动力定位船轨迹跟踪任务为目标,提出了一种新颖的鲁棒自适应控制器的设计,并且引入了二阶快速非奇异终端滑模和神经网络控制算法保证了控制器在实际任务中的执行效果.首先,介绍了三自由度动力定位船的运动模型包括了运动学模型和动力学模型以及推进器故障模型.然后,设计了二阶快速非奇异终端滑模面,提出了一种针对时变扰动和模型不确定性的鲁棒控制方案,保证系统无抖振现象的前提下实现了系统更快的收敛速度.同时运用被动容错控制思想,确保动力定位船在推进器故障发生时依然能够实现预计的跟踪性能.此外,通过Lyapunov稳定性判据分析,证明了提出的改进自适应滑模控制方法可确保系统在初始状态未知前提下,跟踪误差渐近收敛于零.最后,通过数值仿真实验结果验证了控制律的有效性.     

Synchronization and Tracking Control for Dual‐motor Driving Servo Systems with Friction Compensation

A nonsingular fast terminal sliding mode (NFTSM) controller is designed by incorporating the variable gain neural network (NN) observer, which is utilized to guarantee motor speed synchronization and load position tracking of dual‐motor driving servo systems. By designing the variable gain NN observer, the states and uncertain nonlinearities of servo systems are estimated with fast convergence rate and small steady‐state error, where the effects from external disturbance are suppressed as well. Based on the estimated states, the cross‐coupling synchronization strategy and NFTSM tracking scheme are designed to achieve the rapid speed synchronization and precise load tracking, where the NNs are introduced to approximate and compensate friction nonlinearities. In particular, a novel nonlinear synchronization factor characterizing the degree of speed synchronization is proposed to achieve switching between synchronization control and tracking control, which is proven to deal with the coupling problem of synchronization and tracking. Finally, the comparative simulations and experiments are included to verify the reliability and effectiveness.     

具有执行器故障的四旋翼无人机有限时间容错控制

本文主要研究了四旋翼无人机在外部干扰、执行器存在部分失效和偏置故障并发情况下有限时间轨迹跟踪的控制问题. 通过分析四旋翼无人机动力学特性, 构建了带有外部干扰、执行器机构故障的动力学模型. 基于鲁棒全局快速终端滑模控制算法, 设计了一种有限时间容错控制器, 提高了系统对故障的响应速度. 其次, 针对常值/时变故障和干扰,在控制器设计中采用改进的连续函数进行补偿, 减少了由切换函数引起的系统抖振, 并基于Lyapunov函数对控制器的稳定性进行了分析. 最后, 通过仿真实验验证了所设计控制器的有效性和可靠性, 同时存在执行器故障和外部干扰的情况下, 无人机能够实现较好的轨迹跟踪性能.     

An adaptive fuzzy sliding mode controller for robotic manipulators

This paper proposes an adaptive fuzzy sliding mode controller for robotic manipulators. An adaptive single-input single-output (SISO) fuzzy system is applied to calculate each element of the control gain vector in a sliding mode controller. The adaptive law is designed based on the Lyapunov method. Mathematical proof for the stability and the convergence of the system is presented. Various operation situations such as the set point control and the trajectory control are simulated. The simulation results demonstrate that the chattering and the steady state errors, which usually occur in the classical sliding mode control, are eliminated and satisfactory trajectory tracking is achieved.     

Velocity-free adaptive nonsingular fast terminal sliding mode finite-time attitude tracking control for spacecraft

Aiming at the attitude tracking control problem of rigid spacecraft under the condition of unmeasurable angular velocity information, a velocity-free adaptive nonsingular fast terminal sliding mode finite-time tracking control method is proposed. The finite-time extended-state observer is used to estimate the attitude tracking speed errors and the integrated disturbances. Combined with the above control method, a fast nonsingular terminal sliding mode controller with attitude measurement is designed and the adaptive technology is introduced to compensate for the influence of observation errors on the controller. The finite-time convergence of the observer and the control method was demonstrated based on Lyapunov theory, and the effectiveness of the proposed method is verified by numerical simulations.     

多故障并发非线性系统一体化跟踪主动容错控制器设计

针对一类执行器及传感器同时发生故障的非线性系统,综合鲁棒滑模重构观测器及自适应滑模容错控制器设计技术,提出一体化跟踪主动容错控制方案.首先,将系统增维变换为广义系统,运用广义约束逆引入辅助矩阵,采用线性矩阵不等式设计观测器系数矩阵,综合自适应律给出广义鲁棒滑模观测器设计程式;在此基础之上,通过设计鲁棒滑模微分器估计输出向量微分,结合广义鲁棒滑模观测器状态估计结论,实现执行器及传感器故障同时重构.其次,基于故障重构及状态估计结论,提出自适应滑模的跟踪主动容错控制律设计程式.最后,通过开展飞行模拟转台伺服系统数值仿真,检验一体化跟踪主动容错控制器设计方法的有效性.     

神经网络自适应滑模控制的不确定机器人轨迹跟踪控制

提出一种针对机器人跟踪控制的神经网络自适应滑模控制策略。该控制方案将神经网络的非线性映射能力与滑模变结构和自适应控制相结合。对于机器人中不确定项,通过RBF网络分别进行自适应补偿,并通过滑模变结构控制器和自适应控制器消除逼近误差。同时基于Lyapunov理论保证机器手轨迹跟踪误差渐进收敛于零。仿真结果表明了该方法的优越性和有效性。     

Adaptive sliding mode dynamic controller with integrator in the loop for nonholonomic wheeled mobile robot trajectory tracking

In this paper, novel adaptive sliding mode dynamic controller with integrator in the loop is proposed for nonholonomic wheeled mobile robot (WMR). The modified kinematics controller is used to generate kinematics velocities of WMR which are subsequently used as the input to adaptive dynamic controller. Actuator dynamics are also derived to generate actuator voltage of WMR through torque and velocity vectors. Stability of both kinematics and dynamic controller is presented using Lyapunov stability analysis. The proposed scheme is verified and validated using computer simulations for tracking the desired trajectory of WMR. The performance of proposed scheme is compared with standard backstepping kinematics controller and classical sliding mode control. In addition, the performance is further compared with standard backstepping kinematics controller with adaptive sliding mode controller without integrator. It is shown that the proposed scheme exhibits zero steady state error, fast error convergence and robustness in the presence of continuous disturbances and uncertainties.     

空间三关节机器人模糊积分滑模控制

研究提高关节机器人轨迹跟踪控制的性能,由于关节机器人运动中产生振动,影响系统的稳定性能。为解决上述问题,提出了一种反馈线性化的自适应模糊积分滑模控制方法。在上述方法的基础上,对机器人非线性动力学模型反馈线性化。为了进一步提高滑模控制的精度,设计了一种积分滑模面的滑模控制器,可以减弱积分滑模控制的抖振。通过设计一个模糊控制器,根据积分滑模面的大小自适应地调节积分滑模控制的切换部分,达到削弱抖振的目的。利用李亚普诺夫定理证明了控制系统的稳定性。仿真结果表明,改进方法有效地提高了关节机器人跟踪控制性能。     

Adaptive tracking control for uncertain dynamic nonholonomic mobile robots based on visual servoing

The trajectory tracking control problem of dynamic nonholonomic wheeled mobile robots is considered via visual servoing feedback. A kinematic controller is firstly presented for the kinematic model, and then, an adaptive sliding mode controller is designed for the uncertain dynamic model in the presence of parametric uncertainties associated with the camera system. The proposed controller is robust not only to structured uncertainties such as mass variation but also to unstructured one such as disturbances. The asymptotic convergence of tracking errors to equilibrium point is rigorously proved by the Lyapunov method. Simulation results are provided to illustrate the performance of the control law.     

Adaptive tracking control for uncertain dynamic nonholonomic mobile robots based on visual servoing

The trajectory tracking control problem of dynamic nonholonomic wheeled mobile robots is considered via visual servoing feedback.A kinematic controller is firstly presented for the kinematic model,and ...     

Fixed-time fault-tolerant control of manipulator systems based on sliding mode observer

A fixed-time fault-tolerant control scheme based on sliding mode observer is proposed, which makes the system more stable and stronger anti-jamming ability. In our design, its distinct characteristic is to combine the passive fault-tolerant control and non-singular fast terminal sliding mode (NFTSM). And it ensures that the system states can converge to a very small neighborhood near the equilibrium point in a fixed time no matter in normal condition or fault condition. In addition, a novel sliding-mode observer and a fast variable power reaching law are added to make the system converge faster and chattering smaller. Finally, the computer simulation results of a two-joint manipulator demonstrate the feasibility of the proposed strategy.     

Robust adaptive control for mobile manipulators

This paper addresses the trajectory tracking control of a nonholonomic wheeled mobile manipulator with parameter uncertainties and disturbances. The proposed algorithm adopts a robust adaptive control strategy where parametric uncertainties are compensated by adaptive update techniques and the disturbances are suppressed. A kinematic controller is first designed to make the robot follow a desired end-effector and platform trajectories in task space coordinates simultaneously. Then, an adaptive control scheme is proposed, which ensures that the trajectories are accurately tracked even in the presence of external disturbances and uncertainties. The system stability and the convergence of tracking errors to zero are rigorously proven using Lyapunov theory. Simulations results are given to illustrate the effectiveness of the proposed robust adaptive control law in comparison with a sliding mode controller.     

临近空间飞行器的模型参考滑模容错控制

针对临近空间飞行器中未知的执行器控制效益损失和漂移故障,提出了一种模型参考滑模容错控制方法,保证故障系统对参考模型的稳定跟踪性能。利用跟踪误差系统设计容错控制器,首先构造积分滑模面,以增强系统鲁棒性并消除稳态误差;随后,在无需故障诊断单元的条件下设计模型参考滑模控制律,使其增益能实现自适应调节以处理未知故障影响,其中自适应律基于李雅普诺夫稳定性理论设计,保证闭环系统稳定。在临近空间飞行器纵向动力学模型上的仿真验证表明,该方法能处理执行器中发动机节流阀调节通道和升降舵偏转量通道的不同故障,保证系统获得满意的鲁棒容错跟踪性能。     

Fixed‐time adaptive sliding mode trajectory tracking control of uncertain mechanical systems

An adaptive fixed‐time trajectory tracking controller is proposed for uncertain mechanical systems in this study. The polynomial reference trajectory is planned for trajectory tracking error. Fractional power of linear sliding mode is applied to design the nonlinear controller, adaptive laws are used to adjust controller parameters. Trajectory planning and fractional power are combined to ensure the tracking‐error convergence in a fixed time. The boundary layer technique is used to suppress the model uncertainties and decrease the chattering phenomenon. The closed‐loop system stability is proved strictly in the Lyapunov framework to show that the trajectory tracking errors and adaptive parameters tend to zero in a fixed time set in advance. Numerical simulation results of robotic manipulators illustrate the effectiveness of the proposed controller.     

Continuous Sliding Mode Controller with Disturbance Observer for Hypersonic Vehicles

In this paper, a continuous sliding mode controller with disturbance observer is proposed for the tracking control of hypersonic vehicles to suppress the chattering. The finite time disturbance observer is involved to make that the continuous sliding mode controller has the property of disturbance rejection. Due to continuous terms replacing the discontinuous term of traditional sliding mode control, switching modes of velocity and altitude firstly arrive at small regions with respect to disturbance observation errors. Switching modes keep zero and velocity and altitude asymptotically converge to their reference commands after disturbance observation errors disappear. Simulation results have proved the proposed method can guarantee the tracking of velocity and altitude with continuous sliding mode control laws, and also has the fast convergence rate and robustness.      

PHANTOM Omni机器人的自适应模糊滑模控制

针对PHANTOM Omni机器人的位置轨迹跟踪问题,采用了一种基于模糊逻辑的自适应模糊滑模控制方案。利用滑模控制中的切换函数作为输入,根据模糊系统的逼近能力设计控制器,并基于李雅谱诺夫方法设计自适应律对控制器所需参数进行实时调节。仿真中将其与传统的滑模控制进行了比较,仿真结果表明：自适应模糊滑模控制能使PHANTOM Omni机器人更好地实现期望的位置轨迹跟踪并有效地减轻抖振现象,从而证明了该方法在PHANTOM Omni机器人上实施的可行性。     

基于变速趋近律的机电伺服系统自适应滑模控制

针对带有摩擦力矩、负载力矩以及扰动力矩等不确定性的机电伺服系统,提出一种基于变速趋近律的自适应滑模控制方法.首先,构造双曲正切型辅助函数并设计新的变速趋近律,用以调节滑模变量的收敛速度,使其在到达减速点之前具有较快的收敛速度,而在到达减速点以后则能有效削弱抖振.在此基础上,构造自适应滑模控制器,保证系统位置输出能够快速...