浅谈武钢人力资源管理中对专业技术人员的激励

文章运用现代人才资源激励理论,以武汉钢铁集团公司（以下简称武钢）的人才激励为例,紧密结合武钢人力资源管理实际,介绍了企业对专业技术人才激励的现状和武钢人才激励取得的成绩。在总结借鉴国内一些优秀企业人才资源激励经验的基础上,分析了武钢人才资源管理及激励机制存在的主要问题,提出了改善武钢人才资源激励机制的对策。为武钢更好地进行人才资源管理,留住优秀人才献计献策。从而也为国有大型企业改革人才资源管理制度提供了案例。     

浅谈企业对员工激励机制的实施运用和创新

阐明了激励机制的实施运用和创新是企业发展的客观要求,分析了激励机制在实施运用和创新过程中存在的问题和深层次的原因,用渐进式的方法,论述了新形势下激励机制的实施运用和创新的途径和方法.企业要重视对员工的激励并结合本企业实际,综合运用激励机制,把激励的手段和目的结合起来,与时俱进,真正建立起适应企业特色,符合时代特点和员工需求的开放的激励体系.     

浅谈国有大型企业集团的多样性人才培养

应用型人才作为知识的应用者和传播者,已成为企业集团发展过程中首要关注的对象。人才的培养首先要有良好的成长环境,同时激励和压力也是行之有效的途径。浙江省机电集团有限公司在人才培养过程中,通过加强企业人才管理理念和业务培训、遵循层次性的培养方式,建立内部人才激励机制,促进了企业人才能量的积聚与再生。     

现代企业激励机制建设和完善探微

利用激励机制理论,阐述建立现代企业激励机制的必要性,指出我国企业激励机制的欠缺,探讨建设和完善我国现代企业激励机制对策,以求对企业管理和激励人才有所帮助.     

论企业的激励机制

实践表明企业的激励机制是人力资源开发的重要手段,激励机制运用的好坏在一定程度上是决定企业兴衰的一个重要因素.只有加强激励机制的管理,才会实现企业的目标.     

中小企业人才机制建立与实践

通过分析认识国内企业员工激励机制的现状,从探讨员工心理特征类型的角度去分析目前的企业激励机制存在的问题;以提高员工满意度为指导原则．进行员工管理激励模式的重新构建。     

建立适应员工需求的激励机制

人是企业的灵魂，也是企业发展的最关键的因素，人的积极性和创造性能否得到有效的调动．关系到企业的生存与发展。而激励机制的最根本的目的就是调动人的积极性和创造性。激励机制运用的好坏在一定程度上是决定企业兴衰的一个重要因素。     

科研院所研发人员激励机制的研究

为了充分调动科研人才的积极性和创造性,通过对当前科研院所的激励机制存在的问题进行分析,提出了科研院所对科研人员的激励措施。首先分析了科研院所激励机制存在着缺乏科学机制、分配不公平、重视表面,忽略能力等问题,然后提出了物质激励、精神激励、制度激励、股权激励等激励措施。实践应用表明,往往是物质激励、精神激励、制度激励、股权激励单一使用或综合使用,能有效增强科研人员的积极性、创造性,从而提高科研、生产工作效率,进而提高科研院所竞争力。     

论多种激励机制对企业发展的重要性

企业要发展离不开人的创造力和积极性,要综合运用多种激励机制,建立起适应企业特色、时代特点和员工需求的开放的激励体系,使企业在激烈的市场竞争中立于不败.     

浅析非正式员工的激励与企业文化建设

企业发展和市场环境的不断变化,生产线上的员工出现了非正式员工.通过对国内外相关激励理论的探讨,分析企业中非正式员工现状、不公正待遇、激励机制上的缺位及偏颇,最后结合企业实际情况,建立相应的激励制度,激励他们在塑造企业文化中共同前行,为我们的企业发展做出贡献.     

Minimal Realization of Linear Graph Models for Multi-physics Systems

An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t...     

INTEGRAL EQUATION METHOD＇S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.     

Non-monotonic material contrast in scanning ion and scanning electron images

30 keV Ga⁺ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z₂, and shows a non-monotonic relationship between contrast and Z₂. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z₂, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory.     

Application of Feature Extraction through Convolution Neural Networks and SVM Classifier for Robust Grading of Apples

This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an...     

分布动态载荷识别的抗噪处理

针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性.     

基于MELTAC-N平台的核电厂安全级DCS环网研究与测试

针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。     

Short-Term Relay Quality Prediction Algorithm Based on Long and Short-Term Memory

The fraction defective of semi-finished products is predicted to optimize the process of relay production lines, by which production quality and productivity ar...     

End-to-End Multiview Gesture Recognition for Autonomous Car Parking System

The use of hand gestures can be the most intuitive human-machine interaction medium.The early approaches for hand gesture recognition used device-based methods....     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

ANGULAR DISTORTION ALLOWABLE VALUE AND ASSESS METHOD OF WELD ON COKE TOWER

A graph as the new engineering method for estimate the safety of bulging deformation of coke tower is proposed. Through stresses analysis of circumferential weld of coke tower and comparing the stresses produced by pressure with heat stress of steady state, residual stress, bending stress produced by both itself weight and wind loads, it showed that the stresses produced by pressure on the angle distortion are the main factor of equivalent stress of the combined stress. After comparing four kinds of stress controlling conditions, the relation to stress with depth of angular distortion, grade of curvature of angular distortion and half of region of angular distortion has been inferred. Graph of deformation allowable value of coke tower for different condition by angular distortion and half of region of angular distortion has been plotted. The five steps for its engineering use have been explained. The lighter the grade of curvature is, the larger of bulge allowance, may be, and the bigger of depth of angular distortion may pose too. For the coke tower with a popular structure of Dg 5 400 mm×28 mm, the result by graph is nearly more than the result of two formulas formed by other research, the error is less than 7.0%. But, the graph can be easily applied to different size of angular distortion.