Copper corrosion in sodium dodecyl sulphate solutions and carbon nanotube nanofluids: A modified Koutecky–Levich equation to model the agitation effect

Copper corrosion in sodium dodecyl sulphate (SDS) solutions and carbon nanotube (CNT) nanofluids were studied by potentiodynamic polarization. For the corrosion current densities calculations, Koutecky–Levich equation was modified to model the combined charge and mass transport. 0.005 M SDS reduced the copper corrosion current density by 81%. Higher SDS concentrations enhanced corrosion. Stirring SDS solutions increased the corrosion current density by ∼75%. By adding CNT to SDS solution, the corrosion current density first decreased and then remained constant. Stirring CNT nanofluids didn’t change the corrosion current density. An adsorbed CNT layer on copper controlled the corrosion process in CNT nanofluids.     

A new corrosion inhibitor for copper protection

Methyl 3-((2-mercaptophenyl)imino)butanoate (MMPB) was synthesized as inhibitor compound for copper protection. The molecule was designed with azole, thiol functional groups and carboxylate tail group. The inhibition efficiency was examined in acidic chloride media, by means of various electrochemical and spectroscopy techniques. Electrochemical study results showed that high efficiency of MMPB was mainly related with its capability of complex formation with Cu(I) at the surface. The thiol group also improves the adsorptive interaction with the surface, as the carboxylate groups provide extra intermolecular attraction.     

A study on new benzotriazole derivatives as inhibitors on copper corrosion in ground water

The corrosion inhibition properties of newly synthesized 1-(2-pyrrole carbonyl)-benzotriazole (PCBT) and 1-(2-thienyl carbonyl)-benzotriazole (TCBT) in combination with the non-ionic surfactant Triton X-100 (TX-100) on metallic copper were studied in ground water environment and the results were compared with benzotriazole (BTA). Various electrochemical studies such as open circuit potential (OCP), potentiodynamic polarization, ac impedance and cyclic voltammetric (CV) were made. Surface analytical techniques like FT-IR and XRD were also performed. The results indicated that PCBT is a better corrosion inhibitor for copper and the formulation consisting of PCBT and TX-100 offered improved inhibition efficiency (IE) in a synergistic manner.     

2-Amino-5-(4-pyridinyl)-1,3,4-thiadiazole monolayers on copper surface: Observation of the relationship between its corrosion inhibition and adsorption structure

Corrosion inhibition behavior of 2-amino-5-(4-pyridinyl)-1,3,4-thiadiazole (4-APTD) monolayers on copper surface were investigated by electrochemical impedance spectroscopy (EIS), electrochemical polarization measurement and surface-enhanced Raman scattering (SERS) experiment. The EIS mechanism of the copper surface with 4-APTD monolayers fitted to the mode of R(Q(R(QR))). The electrochemical polarization measurements indicated high inhibition efficiency of about 90.4%. SERS results suggested that 4-APTD molecules anchored at copper surface in a tilted orientation directly via N³ and N¹² atoms. The transition adsorption states of 4-APTD on the copper surface were observed as the potential applied from 0 to −1.6 V vs. SCE.     

Experimental and theoretical studies for mild steel corrosion inhibition in 1 M HCl by two new benzothiazine derivatives

The inhibition effect of new heterocyclic compounds, namely 2-aryl-benzothiazin-3-one (P1) and 3-aryl-benzothiazin-2-one (P2) on mild steel corrosion in 1 M HCl was investigated using electrochemical measurements. The results indicated that the inhibition efficiency depends on concentration and molecular structure of the investigated compounds. It is also found that the inhibition of P1 is greater than P2. The molecular structure effect on the corrosion inhibition efficiency was investigated using DFT calculations. The structural and electronic parameters were calculated and discussed. The obtained results show that the experimental and theoretical studies agree well and confirm that P1 is the better inhibitor.     

Additional modification to two-dimensional polymer films of a hydroxymethylbenzene self-assembled monolayer with alkyltriethoxysilanes for enhancing the protective abilities against iron corrosion

Additional modification of the ultrathin two-dimensional polymer film, a p-hydroxymethylbenzene C₆H₄CH₂OH self-assembled monolayer modified with 1,2-bis(triethoxysilyl)ethane (C₂H₅O)₃Si(CH₂)₂Si(OC₂H₅)₃ (BTESE) and alkyltriethoxysilane C_nH_2n+1Si(OC₂H₅)₃ (C_nTES, n = 8 or 18), was attempted to improve the protective ability of the film against iron corrosion. The ability of the film was examined by polarization measurement of an iron electrode coated with the film in an oxygenated 0.5 M NaCl solution after immersion in the solution for 1.5 to 72 h. Marked improvement of the protective efficiency, P was not obtained by additional modification to the polymer film with BTESE. The P values of the two-dimensional polymer films were markedly increased by additional modification with C₈TES. The increases in P were ascribable to improvement of alkyl tail arrangement and additional interconnection in the polymer films. The film on the iron surface was characterized by contact angle measurement, FTIR reflection spectroscopy and X-ray photoelectron spectroscopy. The protective abilities of the two-dimensional polymer films additionally modified with C₈TES were persistent during immersion for 72 h.