Preparation of gold nano-cones as surface-enhanced Raman scattering sensors for molecule detection

Surface-enhanced Raman spectroscopy (SERS) is a powerful novel analytical tool which integrates high levels of sensitivity for trace analysis of chemical and biomolecular species due to the massive enhancement of Raman signals by using nanometre-sized metal particles. However, SERS can be envisaged as an analytical tool only if substrates with strong, predictable and reproducible SERS enhancement can be produced. Here we have developed one simple Ar+ ions sputtering technology to prepare gold nano-cones array on silicon substrates as surface-enhanced Raman scattering (SERS)-active substrates. The tip of the gold cone-structures exhibited an extremely sharp curvature with an apex diameter of 20 nm and the interior apex angle of the nanocones was around 20 degrees. These samples were evaluated as potential SERS substrates using Rhodamine 6G molecules as molecule probe and exhibited SERS enhancement factor of greater than 10, originated from the localized electron field enhancement around the apex of cones and the surface plasmon coupling of periodic structures.     

SERS Active Surface in Two Steps,Patterning and Metallization

Robust and reproducible metallized nano/microstructured surfaces of polymeric surfaces have been successfully prepared by direct laser interference patterning (DLIP) of commercial polymeric films followed by sputtering of metallic thin films. The SERS spectra for 2‐thioaniline adsorbed on a structured polycarbonate surfaces covered with a gold or platinum film showed a ca. three order of magnitude enhancement over a flat surface with the same metal film. The method here reported is suitable for mass production of substrates for SERS since large areas (several cm²) can be structured in ca. 1–5 s.     

Multilayer enhanced gold film over nanostructure surface-enhanced Raman substrates

We have developed a novel class of gold multilayer, surface-enhanced Raman scattering (SERS) substrates that are capable of enhancing SERS signals by 15.3-fold over conventional gold film over nanostructure (GFON) SERS substrates, making them comparable in sensitivity to optimized silver film over nanostructure (SFON) substrates, while providing the long-term stability obtained from gold. They are fabricated by depositing 10 A thick silver oxide islands on conventional GFON substrates, followed by deposition of a second continuous gold layer. The silver oxide layer acts as a dielectric spacer between the two continuous gold films and produces significantly enhanced SERS signals, as compared to optimized single layer substrates of the same geometry or comparable substrates prepared by deposition of silver islands that are not oxidized. In addition to the enhanced sensitivity of these multilayer substrates, they also exhibit long SERS active shelf-lives (i.e., months), with no measurable degradation in SERS enhancement, and relative standard deviations in SERS enhancement of less than 5.2% across the substrate's surface.     

Surface-enhanced Raman scattering dendritic substrates fabricated by deposition of gold and silver on silicon

This paper reports a study on the preparation of gold nanoparticles and silver dendrites on silicon substrates by immersion plating. Firstly, gold was deposited onto silicon wafer from HF aqueous solution containing HAuCl4. Then, the silicon wafer deposited gold was dipped into HF aqueous solution of AgNO3 to form silver coating gold film. Scanning electron microscopy reveals a uniform gold film consisted of gold nanoparticles and rough silver coating gold film containing uniform dendritic structures on silicon surface. By SERS (surface-enhanced Raman scattering) measurements, the fabricated gold and silver coating gold substrates activity toward SERS is assessed. The SERS spectra of crystal violet on the fabricated substrates reflect the different SERS activities on gold nanoparticles film and silver coating gold dendrites film. Compared with pure gold film on silicon, the film of silver coating gold dendrites film significantly increased the SERS intensity. As the fabrication process is very simple, cost-effective and reproducible, and the fabricated silver coating gold substrate is of excellent enhancement ability, spatial uniformity and good stability.     

Gold nanolenses generated by laser ablation-efficient enhancing structure for surface enhanced Raman scattering analytics and sensing

Nanoaggregates formed by metal spheres of different radii and interparticle distances represent finite, deterministic, self-similar systems that efficiently concentrate optical fields and act as "nanolenses". Here we verify experimentally the theoretical concept of nanolenses and explore their potential as enhancing nanostructures in surface enhanced Raman scattering (SERS). Self-similar structures formed by gold nanospheres of different sizes are generated by laser ablation from solid gold into water. These nanolenses exhibit SERS enhancement factors on the order of 10(9). The "chemically clean" preparation process provides several advantages over chemically prepared nanoaggregates and makes the stable and biocompatible gold nanolenses potent enhancing structures for various analytical and sensing applications.     

High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.     

Highly uniform and reproducible surface-enhanced Raman scattering from DNA-tailorable nanoparticles with 1-nm interior gap

An ideal surface-enhanced Raman scattering (SERS) nanostructure for sensing and imaging applications should induce a high signal enhancement, generate a reproducible and uniform response, and should be easy to synthesize. Many SERS-active nanostructures have been investigated, but they suffer from poor reproducibility of the SERS-active sites, and the wide distribution of their enhancement factor values results in an unquantifiable SERS signal. Here, we show that DNA on gold nanoparticles facilitates the formation of well-defined gold nanobridged nanogap particles (Au-NNP) that generate a highly stable and reproducible SERS signal. The uniform and hollow gap (～1 nm) between the gold core and gold shell can be precisely loaded with a quantifiable amount of Raman dyes. SERS signals generated by Au-NNPs showed a linear dependence on probe concentration (R(2) > 0.98) and were sensitive down to 10 fM concentrations. Single-particle nano-Raman mapping analysis revealed that >90% of Au-NNPs had enhancement factors greater than 1.0 × 10(8), which is sufficient for single-molecule detection, and the values were narrowly distributed between 1.0 × 10(8) and 5.0 × 10(9).     

Gold/palladium and silver/palladium colloids as novel metallic substrates for surface-enhanced Raman scattering

New surface-enhanced Raman scattering (SERS) substrates, composed of gold or silver colloidal nanoparticles doped with palladium, were prepared. These novel colloids are stable and maintain a satisfactory SERS efficiency, even after long aging. The interest in doping the coinage metal nanoparticles with palladium is due to the well-known catalytic activity of this metal. Transmission electron microscopy (TEM) and ultraviolet-visible absorption spectroscopy were used to characterize the shape and size of the metal particles. It was found that these bimetallic colloidal nanoparticles have a core-shell structure, with gold or silver coated with palladium clusters.     

A reusable surface-enhanced Raman scattering (SERS) substrate prepared by atomic layer deposition of alumina on a multi-layer gold and silver film

A thermally stable, reusable surface-enhanced Raman scattering (SERS) substrate consisting of a gold/silver bi-layer film with a protective alumina coating is reported. The film is synthesized by thermally evaporating sequential layers of gold and silver followed by coating an ultra-thin alumina layer using atomic layer deposition. The use of gold as the foundational layer improves the thermal stability of the metal bi-layer film while providing the additional ability to tune the SERS response. Deposition of the thin alumina overlayer on the bi-layer film creates a SERS substrate capable of enduring multiple high-temperature exposures to 400 °C with minimal loss of enhancement capabilities. We demonstrate the multi-use capability of the substrate by measuring the SERS spectrum of rhodamine 6G followed by a thermal treatment at 400 °C to remove the analyte. A representative substrate was used to acquire SERS spectra of rhodamine 6G up to five repeat measurements, thus establishing the reusability of this relatively simple, inexpensive, and stable substrate.     

Growth of Ag, Au, Cu, and Pt nanostructures on surfaces by micropatterned laser-image formations

Silver, gold, copper and platinum nanoparticles (NPs) were grown on surfaces in the form of patterns by the exposure of laser radiation onto droplets of metal ion solutions and the aid of a reducing agent. The generation of patterns from metallic NPs was achieved by combining induced growth of NPs and nanostructures by laser incidence directly on surfaces and optical image formation techniques for transferring the patterns. Near-UV (363.8 nm) and visible (532 nm) laser wavelengths were used for the laser-induced growth of NPs into microstructures on glass, quartz, stainless steel, silicon, and gold-on-silicon substrates. The sizes of the patterns formed were on the micrometer scale and the sizes of the transferred patterns were on the millimeter scale. The patterns formed were generated by optical transference of image and interference of laser beams. Ag and Au substrates were highly active in surface enhanced Raman spectroscopy (SERS). The enhanced Raman activity was measured for SERS probe molecules: 9H-purin-6-amine (adenine) and 1,2-bis (4-pyridyl)-ethane analytes on Ag and Au substrates, respectively. The enhancement factors obtained were 1.8×10(5) and 6.2×10(6), respectively.     

Bright Surface‐Enhanced Raman Scattering with Fluorescence Quenching from Silica Encapsulated J‐Aggregate Coated Gold Nanoparticles

Plexitonic nanoparticles offer variable optical properties through tunable excitations, in addition to electric field enhancements that far exceed molecular resonators. This study demonstrates a way to design an ultrabright surface‐enhanced Raman spectroscopy (SERS) signal while simultaneously quenching the fluorescence background through silica encapsulation of the semiconductor–metal composite nanoparticles. Using a multistep approach, a J‐aggregate‐forming organic dye is assembled on the surface of gold nanoparticles using a cationic linker. Excitonic resonance of the J‐aggregate–metal system shows an enhanced SERS signal at an appropriate excitation wavelength. Further encapsulation of the decorated particles in silica shows a significant reduction in the fluorescence signal of the Raman spectra (5× reduction) and an increase in Raman scattering (7× enhancement) when compared to phospholipid encapsulation. This reduction in fluorescence is important for maximizing the useful SERS enhancement from the particle, which shows a signal increase on the order of 10⁴ times greater than J‐aggregated dye in solution and 24 times greater than Oxonica S421 SERS tag. The silica layer also serves to promote colloidal stability. The combination of reduced fluorescence background, enhanced SERS intensity, and temporal stability makes these particles highly distinguishable with potential to enable high‐throughput applications such as SERS flow cytometry.     

Patterned nanoporous gold as an effective SERS template

We demonstrate large area two-dimensional arrays of patterned nanoporous gold for use as easy-to-fabricate, cost-effective, and stable surface enhanced Raman scattering (SERS) templates. Using a simple one-step direct imprinting process, subwavelength nanoporous gold (NPG) gratings are defined by densifying appropriate regions of a NPG film. Both the densified NPG and the two-dimensional grating pattern are shown to contribute to the SERS enhancement. The resulting substrates exhibit uniform SERS enhancement factors of at least 10(7) for a monolayer of adsorbed benzenethiol molecules.     

Plasma reduction of silver compounds for fabrication of surface-enhanced Raman scattering substrates

Several silver compounds were reduced by low-pressure air plasma to produce porous nanostructured surfaces as surface-enhanced Raman scattering (SERS) substrates. This method is advantageous because substrates are easy to prepare and the silver metal surface is inherently clean without spectroscopic background. Silver compounds were melted into 1-2 mm slugs on quartz slides and plasma treated for different lengths of time. Silver chloride was found to be the best compound to make reproducible and stable SERS substrates. SERS activity of the substrates was tested using L-tryptophan, 4-mercaptobenzoic acid, and adenine.     

Realization of thermally durable close-packed 2D gold nanoparticle arrays using self-assembly and plasma etching

Realization of thermally and chemically durable, ordered gold nanostructures using bottom-up self-assembly techniques are essential for applications in a wide range of areas including catalysis, energy generation, and sensing. Herein, we describe a modular process for realizing uniform arrays of gold nanoparticles, with interparticle spacings of 2?nm and above, by using RF plasma etching to remove ligands from self-assembled arrays of ligand-coated gold nanoparticles. Both nanoscale imaging and macroscale spectroscopic characterization techniques were used to determine the optimal conditions for plasma etching, namely RF power, operating pressure, duration of treatment, and type of gas. We then studied the effect of nanoparticle size, interparticle spacing, and type of substrate on the thermal durability of plasma-treated and untreated nanoparticle arrays. Plasma-treated arrays showed enhanced chemical and thermal durability, on account of the removal of ligands. To illustrate the application potential of the developed process, robust SERS (surface-enhanced Raman scattering) substrates were formed using plasma-treated arrays of silver-coated gold nanoparticles that had a silicon wafer or photopaper as the underlying support. The measured value of the average SERS enhancement factor (2?×?10(5)) was quantitatively reproducible on both silicon and paper substrates. The silicon substrates gave quantitatively reproducible results even after thermal annealing. The paper-based SERS substrate was also used to swab and detect probe molecules deposited on a solid surface.     

Role of the micro- and nanostructure in the performance of surface-enhanced Raman scattering substrates assembled from gold nanoparticles

Highly active and stable substrates for surface-enhanced Raman scattering (SERS) can be fabricated by using colloidal crystals to template gold nanoparticles into structured porous films. The structure-dependent performance of these SERS substrates was systematically characterized with cyanide in continuous flow microfluidic chambers. A matrix of experiments was designed to isolate the SERS contributions arising from nano- and microscale porosity, long-range ordering of the micropores, and the thickness of the nanoparticle layer. The SERS results were compared to the substrate structure observed by scanning electron microscopy (SEM) and optical microscopy to correlate substrate structure to SERS performance. The Raman peak intensity was consistently highest for nanoporous substrates with three-dimensionally ordered micropores, and decreases if the micropores are not ordered or not templated. Removing the nanoscale porosity by fusion of the nanoparticles (without removing the large micropores) leads to a drastic plunge in substrate performance. The peak intensity does not strongly correlate to the thickness of the nanoparticle films. The results make possible the efficient controlled fabrication of stable, reproducible, and highly active substrates for SERS based chemical sensors with continuous sampling.     

Competitive Reaction Pathway for Site‐Selective Conjugation of Raman Dyes to Hotspots on Gold Nanorods for Greatly Enhanced SERS Performance

Common methods to prepare SERS (surface‐enhanced Raman scattering) probes rely on random conjugation of Raman dyes onto metal nanostructures, but most of the Raman dyes are not located at Raman‐intense electromagnetic hotspots thus not contributing to SERS enhancement substantially. Herein, a competitive reaction between transverse gold overgrowth and dye conjugation is described to achieve site selective conjugation of Raman dyes to the hotspots (ends) on gold nanorods (GNRs). The preferential overgrowth on the nanorod side surface creates a barrier to prevent the Raman dyes from binding to the side surface except the ends of the GNRs, where the highest SERS enhancement factors are expected. The SERS enhancement observed from this special structure is dozens of times larger than that from conjugates synthesized by conventional methods. This simple and powerful strategy to prepare SERS probes can be extended to different anisotropic metal nanostructures with electromagnetic hotspots and has immense potential in in‐depth SERS‐based biological imaging and single‐molecule detection.     

Dual layer and multilayer enhancements from silver film over nanostructured surface-enhanced Raman substrates

Novel dual layer and multilayer silver film over nanostructure (SFON) substrates have been developed that provide surface-enhanced Raman scattering (SERS) signal enhancements of greater than 1000% compared to conventional single layer SFON substrates. These substrates provide signal enhancement factors of 3.8 x 10(5) and greater for a variety of SERS active analytes. Substrate preparation is accomplished by vapor depositing a thick (approximately 100 nm) layer of silver on top of an underlying layer of alumina nanoparticles, followed by deposition of additional layers of silver with silver oxide layers between them. Unlike previous dual layer silver island based substrates that have been developed, these substrates do not rely on achieving an optimal morphology via deposition of silver. Instead, these substrates rely on the roughness being provided by the original under-layer, providing enhanced substrate homogeneity and more reproducible signals than either silver island substrates or colloidal substrates. In addition, the signal enhancement gives these substrates extended lifetimes compared to conventional single layer SFON substrates. Finally, this study also shows that geometric surface structure and surface roughness factors play little or no role in this enhancement process, allowing for this multilayer fabrication process to be applied to many different types of substrates achieving similar or even greater results.     

Surface-enhanced Raman spectroscopy of self-assembled monolayers: sandwich architecture and nanoparticle shape dependence

Surface enhanced Raman scattering (SERS) spectra of 4-mercaptobenzoic acid (4-MBA) self-assembled monolayers (SAMs) on gold substrates is presented for SAMs onto which gold nanoparticles of various shapes have been electrostatically immobilized. SERS spectra of 4-MBA SAMs are enhanced in the presence of immobilized gold nanocrystals by a factor of 10(7)-10(9) relative to 4-MBA in solution. Large enhancement factors are a likely result of plasmon coupling between the nanoparticles (localized surface plasmon) and the smooth gold substrate (surface plasmon polariton), creating large localized electromagnetic fields at their interface, where 4-MBA molecules reside in this sandwich architecture. Moreover, enhancement factors depend on nanoparticle shape and vary by a factor of 10(2). This SERS geometry offers large surface enhancements for molecules adsorbed onto planar substrates and could be quite useful for determining chemical information for poor Raman scatterers from assays on 2-D substrates.     

A reproducible SERS substrate based on electrostatically assisted APTES-functionalized surface-assembly of gold nanostars

A SERS active gold nanostar layer on the surface of ITO glass slip has been prepared by a low-cost electrostatically assisted APTES-functionalized surface-assembly method for SERS analysis. The two-dimensional morphology of the SERS substrate was examined by scanning electron microscopy. Comparative analysis revealed that the optical characteristics and SERS efficiency of these substrates varied as a function of nanostar morphology. It was found that the substrate assembled with the longest branches of nanostars generated the best SERS efficiency, whether the excitation source is 785 or 633 nm. The potential use of these substrates in detection applications was also investigated by using Nile blue A and Rhodamine 6G. The detection limits are 5 × 10(-11) M and 1 × 10(-9) M, respectively, when using the 785 nm excitation source. Apart from this high enhancement effect, the substrate here also shows extremely good reproducibility at the same time. All of these indicate that gold nanostars are a very good structure for SERS substrate assembly.