Radiation synthesis and characterization of polyvinyl alcohol/chitosan/silver nanocomposite membranes: antimicrobial and blood compatibility studies

Polyvinyl alcohol/chitosan/silver (PVA/CS/Ag) nanocomposite membranes were synthesized by γ-radiation with promising antimicrobial and biomedical applications. The nanocomposite membranes were prepared by mixing PVA and CS solutions with different copolymer compositions in the presence of silver nitrate (AgNO₃) and glutaraldehyde as cross-linker, followed by in situ reduction with γ-radiation at different doses. The nanocomposite membranes were characterized by ultraviolet spectroscopy (UV), Fourier transform infrared, X-ray diffraction (XRD) and transmission electron microscopy (TEM). UV studies showed a strong peak around λ _max at 430 nm due to surface plasmon resonance of silver nanoparticles formed during irradiation. As the irradiation dose increased from 25 to 75 kGy, the plasmon band is shifted from 430 to 418 nm with high intensity, indicating the formation of smaller particles. TEM investigation showed uniform distribution of silver nanoparticles (AgNPs) in the membranes with mean diameter of 32–19 nm. XRD results confirmed that the mean diameter of AgNPs estimated from the Debye–Scherrer formula was in the range of 27.5–12.8 nm which confirms the TEM results. The PVA/CS/Ag nanocomposite membranes exhibited good antibacterial activity and were found to cause significant reduction in microbial growth. The nanocomposite membranes showed non-thrombogenicity effect and slightly haemolytic potential, suggesting their promising use in biomedical applications.     

Preparation, characterization, and antibacterial properties of pH-responsive P(MMA-co-MAA)/silver nanocomposite hydrogels

A pH-responsive copolymer hydrogel was synthesized based on methyl methacrylate (MMA) and methacrylic acid (MAA) as monomers, and was adopted as a nanoreactor for assembling Ag nanoparticles. Fourier transform infrared spectroscope (FTIR), scanning electron microscopy (SEM), transmission electron microscope (TEM), UV-visible spectroscopy (UV-Vis) and thermogravimetric analysis (TGA) were used to fully characterize the formation of silver nanoparticles in P(MMA-co-MAA) hydrogels. The experimental results showed that the P(MMA-co-MAA) hydrogels assume a three-networks architecture in morphologies, and that nearly spherical Ag nanoparticles are formed in these hydrogel networks; the size of these Ag nanoparticles varies with the system composition. The swelling kinetics investigations demonstrated that the equilibrium swelling ratio (ESR) of the P(MMA-co-MAA)/Ag hydrogels depended on the content of the MAA and pH of the buffer solutions, and the ESR values were reduced with increasing MAA contents. The antibacterial properties against both S. aureus and B. subtilis bacteria demonstrated that the P(MMA-co-MAA)/silver nanocomposite hydrogels had higher antimicrobial efficacy than the pure P(MMA-co-MAA) counterparts. Therefore, the nanocomposite hydrogels turned out to be a potentially smart material in the range of applications of antibacterial activity.     

Size controlled synthesis of well-distributed nano-silver on hydroxyapatite using alkanolamine compounds

A well-distributed nano-silver hydroxyapatite composite has been successfully prepared by a one-pot synthesis method. Hydroxyapatite was separately synthesized by a sol-gel method, then impregnated with silver nanoparticles with the mediation of Uncaria gambir Roxb. leaf extract in the presence of three kinds of alkanolamine compound; monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) as capping agents. The effect of different capping agents on the properties of the silver nanoparticles and the nano-silver hydroxyapatite composite were studied. UV–visible spectrophotometer analysis exhibited absorbance peaks at 402–439 nm which specifically corresponds to spherical silver nanoparticles. Higher optical absorbance was observed in TEA-capped silver nanoparticles, than in DEA and MEA-capped ones. X-ray diffraction (XRD) analysis showed a highly crystalline hexagonal structure for hydroxyapatite and no detected metallic silver. However, the presence of 1.65% silver was confirmed by energy dispersive x-ray (EDX) spectroscopy analysis. Transmission electron microscopy (TEM) analysis revealed spherical silver nanoparticles with a size range of 2–62 nm (smallest mean diameter of 2 nm) adhered to the hydroxyapatite surface. The TEA capped impregnated silver nanoparticles were the smallest, corresponding to the best capping performance, followed by those capped by DEA and MEA. Small-sized nanoparticles on hydroxyapatite are beneficial for highly antibacterial bone implants.     

Silver-zinc oxide nanocomposite: From synthesis to antimicrobial and anticancer properties

A green method by Verbascum speciosum was used to synthesize zinc oxide nanoparticles (ZnO NPs). ZnO NPs were coated with silver to synthesize Ag–ZnO nanocomposite (NCs). The physicochemical properties of Ag–ZnO NCs were analyzed by Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), field emission scanning electron microscope (FESEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and zeta potential. The FTIR indicated the peak of Zn–O vibration and some hydroxyl and carboxyl groups. PXRD analyses confirmed the synthesis of ZnO NPs and Ag–ZnO NCs. Due to the size of the crystallite obtained from PXRD, solid-phase sizes (from FESEM and TEM images), and dynamic sizes from DLS, agglomeration was observed. The Ag–ZnO NCs showed a negative charge surface (?49.3 mV). Ag–ZnO NCs had a high antibacterial activity towards two most important infectious bacteria (i.e., Escherichia coli and Staphylococcus aureus) and anticancer activity against human liver-carcinoma cells (HepG2). Later, it depended on time and concentration of Ag–ZnO NCs. The cytotoxicity properties of Ag–ZnO NCs were also studied against NIH-3T3 as a normal cell, where the results verified the lower cell toxicities of nanocomposite than the HepG2.     

Preparation and characterization of cotton fibers coated with AA-IA hydrogel containing silver/graphene or graphene oxide nanoparticles

This study presents the fabrication and characterization of cotton textile fibers coated with hydrogels containing silver and Graphene or Graphene Oxide nanoparticles using 1-hexyl-3-methyl-imidazolium (HMIMPF6) ionic liquid (IL) as carbon filler dispersant. Acrylic acid/Itaconic acid (AA-IA) hydrogels are synthesized by polymerizing an acrylic acid-itaconic acid aqueous (80/20 v/v) solution and mixed with 2-2-Azobis (2-methylpropionamide) diclorohydrate, and N,N´-methylenbis (acrylamide). Then silver nanoparticles are generated throughout the hydrogel networks using in situ method by incorporating the silver ions and subsequent reduction with sodium borohydride. Then a cotton textile fiber substrate was coated with this hydrogel. Finally, graphene or graphene oxide was added to the textile substrate already impregnated with hydrogel and silver nanoparticles. In order to favor the dispersion of the carbon nano-structures in the system, an IL was used. The influence of these nanocomposite hydrogels on the properties of textile fiber were investigated by infrared spectroscopy (ATR), scanning electron microscopy (SEM), inductively coupled plasma mass spectroscopy (ICP) and antibacterial tests against Staphylococcus aureus (Gram positive) and Escherichia coli (Gram negative). The effect of each and combined fillers dispersion on antimicrobial properties were determined. Cotton fibers coated with hydrogel containing silver nanoparticles and graphene showed better results when the ionic liquid was used. Graphene showed greater antimicrobial efficiency than graphene oxide. It was proved that the textiles coated with hydrogels containing these fillers had an excellent antibacterial ability and are a good option to be used for medical applications such as wounds and burns dressing.     

Antibacterial activity of silver nanoparticles prepared by a chemical reduction method

Silver nanoparticles were obtained by chemical reduction of silver nitrate in water with sodium borohydride (NaBH₄) in the presence of SDS (sodium dodecyl sulfate) as a stabilizer. The synthesized silver nanoparticles were characterized by UV-vis spectroscopy (UV-vis) and transmission electron microscopy (TEM). The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima at 400 nm by UV-vis. TEM showed the spherical nanoparticles with size in 10–20 nm. The antibacterial activity of silver nanoparticles was tested by using Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coil (E. coli). The silver nanoparticles, whose bacterial activity was dependent on the aggregation degree between particles, exhibited bacterial activity against S. aureus and E. coli.     

One-pot synthesis of CdS sensitized TiO2 decorated reduced graphene oxide nanosheets for the hydrolysis of ammonia-borane and the effective removal of organic pollutant from water

A hybrid material of reduced graphene oxide (RGO) sheets decorated with CdS-TiO₂ NPs was prepared through a facile one-pot hydrothermal method. The assembly of CdS-TiO₂ nanoparticles (NPs) on RGO sheets was in-situ produced. As-synthesized nanocomposites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy disperse X-ray spectrum (EDS), fourier transform infrared spectroscopy (FTIR), and photoluminescence spectroscopy (PL). The obtained nanocomposites exhibited a good photocatalytic activity for the visible-light-induced decomposition of methylene blue (MB) dye and hydrolysis of ammonia borane. The results showed that by incorporation of CdS and TiO₂ NPs on graphene oxide sheets the photocatalytic efficiency was enhanced. The significant enhancement in the photocatalytic activity of CdS-TiO₂/RGO nanocomposites under visible light irradiation can be ascribed to the effect of CdS by acting as electron traps in TiO₂ band gap. Reduced graphene oxide worked as the adsorbent, electron acceptor and a photo-sensitizer to efficiently enhance the dye photo decomposition. Such nanocomposite photocatalyst might find potential application in a wide range of fields, including hydrogen energy generation, air purification, and wastewater treatment.     

Synthesis of waterborne polyurethane–silver nanoparticle antibacterial coating for synthetic leather

An antibacterial coating composed of silver nanoparticles and waterborne polyurethane was synthesized for use on synthetic leather. In this study, silver nanoparticles were prepared and used as nanofiller to impart antibacterial property. Silver nanoparticles were synthesized by using poly(vinyl pyrrolidone) as dispersant and sodium borohydride (NaBH₄) as reducing agent. Silver nanoparticles were characterized by transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analysis. The optimum dispersant was selected according to the zeta potential of dispersions. Waterborne polyurethane was synthesized by using isophorone diisocyanate, 2-bis(hydroxymethyl)propionic acid, triethylamine, and polytetramethylene ether glycol. Waterborne polyurethane–silver antibacterial coating was obtained by ultrasonic dispersion, and then cast on the surface of synthetic leather. The antibacterial property and coating adhesion were investigated. The results showed silver nanoparticles homogeneously dispersed in waterborne polyurethane and adhesion reaching grade 4. Antibacterial testing showed bacterial reduction of 99.99% for Escherichia coli and 87.5% for Staphylococcus aureus.     

The enhanced bactericidal effect of plasma sprayed zinc-modified calcium silicate coating by the addition of silver

Our previous work demonstrated the antibacterial activity of plasma sprayed zinc-modified calcium silicate coating. To enhance the bactericidal effect, in this paper, silver and zinc co-incorporated calcium silicate coating (ZC0.3-Ag) was fabricated onto Ti–6Al–4V substrate via plasma spraying technology. The coating was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) measurements. Transmission electron microscopy (TEM) showed that the silver nanoparticles 10–100 nm in diameter were randomly distributed in the amorphous matrix after the silver modification. In chemical durability test, the ZC0.3-Ag coating presented improved chemical stability when compared with that of the original and Ag-doped coating. In vitro antibacterial study indicated that the inactivation of bacteria (Staphylococcus aureus and Escherichia coli) on the ZC0.3-Ag coating was significantly enhanced compared to that on the Zn-modified coatings. The enhanced bactericidal activity was attributed to the addition of silver. Cytocompatibility evaluation demonstrated that the ZC0.3-Ag coating surface supported the adhesion and spreading of human mesenchymal stem cells (hMSCs), and no significant cytotoxicity was observed for the coating.     

Green synthesis of protein capped silver nanoparticles from phytopathogenic fungus Macrophomina phaseolina (Tassi) Goid with antimicrobial properties against multidrug-resistant bacteria

In recent years, green synthesis of nanoparticles, i.e., synthesizing nanoparticles using biological sources like bacteria, algae, fungus, or plant extracts have attracted much attention due to its environment-friendly and economic aspects. The present study demonstrates an eco-friendly and low-cost method of biosynthesis of silver nanoparticles using cell-free filtrate of phytopathogenic fungus Macrophomina phaseolina. UV-visible spectrum showed a peak at 450 nm corresponding to the plasmon absorbance of silver nanoparticles. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM) revealed the presence of spherical silver nanoparticles of the size range 5 to 40 nm, most of these being 16 to 20 nm in diameter. X-ray diffraction (XRD) spectrum of the nanoparticles exhibited 2θ values corresponding to silver nanoparticles. These nanoparticles were found to be naturally protein coated. SDS-PAGE analysis showed the presence of an 85-kDa protein band responsible for capping and stabilization of the silver nanoparticles. Antimicrobial activities of the silver nanoparticles against human as well as plant pathogenic multidrug-resistant bacteria were assayed. The particles showed inhibitory effect on the growth kinetics of human and plant bacteria. Furthermore, the genotoxic potential of the silver nanoparticles with increasing concentrations was evaluated by DNA fragmentation studies using plasmid DNA.     

A convenient approach to synthesize stable silver nanoparticles and silver/polystyrene nanocomposite particles

In this study, silver nanoparticles were prepared by the reduction of silver nitrate in SDS+ isopentanol/styrene/H₂O reverse microemulsion system using sodium citrate as reducing agent. The Ag/PS nanocomposite particles were prepared by in situ emulsion polymerization of the styrene system containing silver nanoparticles that did not separate from the reaction solution. The polymerization dynamic characteristic was studied, at the same time, silver nanparticles and the encapsulation of composite particles were characterized by Fourier‐transform‐infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X‐ray diffraction (XRD) measurement, UV–vis diffuse reflectance spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The results of TEM and UV–vis absorption spectra showed that well‐dispersed silver nanoparticles have a narrow size distribution. XRD showed that Ag and Ag/PS nanocomposite particles were less than 10 and 20 nm in size, which is similar to those observed by TEM. The results of XPS spectra revealed that the microemulsion system can stabilize the silver nanoparticles from aggregation and provided supporting evidence for the polystyrene encapsulated silver nanoparticle structure. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.     

Radiation synthesis and characterization of poly(vinyl alcohol)/poly(N-vinyl-2-pyrrolidone) based hydrogels containing silver nanoparticles

A series of PVA/PVP based hydrogels at different compositions were prepared by gamma irradiation. The gel fraction degree of swelling were investigated. Highly stable and uniformly distributed silver nanoparticles have been obtained onto hydrogel networks. The morphology and structure of (PVA/PVP) hydrogel and dispersion of the silver nanoparticles in the polymeric matrix were examined by scanning electron microscopy (SEM) and infrared spectroscopy (FT-IR), respectively. The formation of silver nanoparticles has been confirmed by ultraviolet visible (UV–vis) spectroscopy. A strong characteristic absorption peak was found to be around 420 nm for the silver nanoparticles in the hydrogel nanocomposite. The X-ray diffraction pattern confirmed the formation of silver nanoparticles with average particle size of 12 nm. The diameter distribution of silver nanoparticles was determined by dynamic light scattering DLS. Transmission electron microscope (TEM) showed almost spherical and uniform distribution of silver nanoparticles through the hydrogel network and the mean size of silver nanoparticles ranging is 23 nm. The good swelling properties and antibacterial of PVA/PVP-Ag hydrogel suggest that it can be a good candidate as wound dressing.     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

聚苯胺-木质素磺酸纳米复合物的制备及吸附性能

以木质素磺酸(LS)为分散剂,采用静态聚合法制备了聚苯胺-木质素磺酸(PANI-LS)纳米复合物。通过扫描电子显微镜、透射电子显微镜、红外光谱、紫外可见光谱和广角X射线衍射对纳米复合物的形貌、结构和性能进行了表征。同时,研究了该纳米复合物对银离子的吸附性能。在银离子初始浓度为0.03 mol·L^-1时,PANI-LS纳米复合物对银离子的最大吸附容量为500 mg·g^-1。对吸附后纳米复合物的透射电子显微镜和广角X射线衍射的研究表明,PANI-LS纳米复合物对银离子具有还原作用,吸附后纳米复合物表面有直径为2～7 nm的单质银纳米粒子生成。     

Antibacterial performance of Ag nanoparticles and AgGO nanocomposites prepared via rapid microwave-assisted synthesis method

Silver nanoparticles and silver-graphene oxide nanocomposites were fabricated using a rapid and green microwave irradiation synthesis method. Silver nanoparticles with narrow size distribution were formed under microwave irradiation for both samples. The silver nanoparticles were distributed randomly on the surface of graphene oxide. The Fourier transform infrared and thermogravimetry analysis results showed that the graphene oxide for the AgNP-graphene oxide (AgGO) sample was partially reduced during the in situ synthesis of silver nanoparticles. Both silver nanoparticles and AgGO nanocomposites exhibited stronger antibacterial properties against Gram-negative bacteria (Salmonella typhi and Escherichia coli) than against Gram-positive bacteria (Staphyloccocus aureus and Staphyloccocus epidermidis). The AgGO nanocomposites consisting of approximately 40 wt.% silver can achieve antibacterial performance comparable to that of neat silver nanoparticles.     

Synthesis of graphene decorated with silver nanoparticles by simultaneous reduction of graphene oxide and silver ions with glucose

A green and efficient approach for the synthesis of graphene decorated with silver nanoparticles is demonstrated by simultaneously reducing both graphene oxide (GO) sheets and silver ions with glucose as the reducing agent and poly(N-vinyl-2-pyrrolidone) (PVP) as the surface modifier. Different silver-containing materials are obtained by changing the synthesis temperature. The oxygen-containing groups of the substrate influence its decoration with the in situ formed silver nanoparticles. The combination of glucose and a silver–ammonia solution, as well as maintaining a good dispersion of GO by using PVP are crucial for the decoration of graphene with silver nanoparticles. The materials exhibit a distinct surface-enhanced Raman scattering effect.     

Enhanced antibacterial activity of bimetallic gold-silver core-shell nanoparticles at low silver concentration

Herein we report the development of bimetallic Au@Ag core-shell nanoparticles (NPs) where gold nanoparticles (Au NPs) served as the seeds for continuous deposition of silver atoms on its surface. The core-shell structure and morphology were examined by UV-Vis spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis and X-ray diffraction (XRD). The core-shell NPs showed antibacterial activity against both gram negative (Escherichia coli and Pseudomonas aeruginosa) and gram positive (Enterococcus faecalis and Pediococcus acidilactici) bacteria at low concentration of silver present in the shell, with more efficacy against gram negative bacteria. TEM and flow cytometric studies showed that the core-shell NPs attached to the bacterial surface and caused membrane damage leading to cell death. The enhanced antibacterial properties of Au@Ag core-shell NPs was possibly due to the more active silver atoms in the shell surrounding gold core due to high surface free energy of the surface Ag atoms owing to shell thinness in the bimetallic NP structure.     

Hydrogen sensor based on a graphene – palladium nanocomposite

A composite material was prepared from graphene and palladium nanoparticles (PdNP) by layer-by-layer deposition on gold electrodes. The material was characterized by absorption spectroscopy, scanning electron microscopy, Raman spectroscopy and surface plasmon resonance. Cyclic voltammetry demonstrated the presence of electrocatalytic centers in the palladium decorated graphene. This material can serve as a sensor material for hydrogen at levels from 0.5 to 1% in synthetic air. Pure graphene is poorly sensitive to hydrogen, but incorporation of PdNPs increases its sensitivity by more than an order of magnitude. The effects of hydrogen, nitrogen dioxide and humidity were studied. Sensor regeneration is accelerated in humid air. The sensitivity of the nanocomposite depends on the number of bilayers of graphene–PdNPs.     

Development of Gelatin Based Inorganic Nanocomposite Hydrogels for Inactivation of Bacteria

In this investigation, silver nanocomposite hydrogels were developed by using acrylamide and biodegradable gelatin. Silver nanoparticles were generated throughout the hydrogel networks using in situ method by incorporating Ag⁺ ions and the subsequent treatment with sodium borohydride. The effect of gelatin on the swelling studies was investigated. The hydrogel synthesized silver nanocomposites were characterized by using Fourier transform infrared, UV–Visible spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron and transmission electron microscopy techniques. The biodegradable gelatin-based silver nanocomposite hydrogels were tested for antibacterial properties. The results indicate that these biodegradable silver nanocomposite hydrogels can be useful in medical applications, as antibacterial agents.     

Analysis and modeling of modified styrene–acrylonitrile/carboxylated acrylonitrile butadiene rubber nanocomposites filled with graphene and graphene oxide: Interfacial interaction and nonlinear elastoplastic behavior

Nonlinear elastoplastic behavior of the nanocomposites based on the styrene–acrylonitrile/carboxylated acrylonitrile butadiene rubber (SAN/XNBR) blend was investigated using experimental and theoretical analysis. Graphene, graphene oxide nanoparticles, and glycidyl methacrylate-grafted-XNBR (XNBR-g-GMA) as a compatibilizer were incorporated in the SAN/XNBR blends. In this regard, the focus of this study is on modeling of the stress–strain behavior of these nanocomposites, considering the effect of the interfacial interactions made by compatibilizer. For this purpose, field emission scanning electron microscopy (FESEM) and transmission electron microscope (TEM) techniques were used to investigate the relationship between microstructure and mechanical properties of nanocomposites. In addition, FESEM and TEM images showed that the presence of a compatibilizer could influence the dispersion and localization of the nanoparticles. According to the tensile test results, the presence of the compatibilizer increased the mechanical properties of the nanocomposites, specifically elongation at break. Considering the nanocomposite containing compatibilizer and graphene oxide, the elongation at break increased about 570% compared with the nanocomposite without compatibilizer. Better dispersion of graphene oxide and the creation of chemical interaction among components in the presence of the XNBR-g-GMA compatibilizer could be the reasons for these improvements, as confirmed by TEM. The usage of the Bergstrom–Boyce model for analyzing the nonlinear elastoplastic behavior of the nanocomposites illustrated proper conformity with the experimental data in the elastic region. However, there are some deviations in the viscoplastic region, particularly close to the breaking elongation region.