Preparation and characterization of spindle-shaped nanoporous anatase TiO<Subscript>2</Subscript>–Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript> heterostructure with enhanced visible light driven photocatalytic performance

A novel spindle-shaped nanoporous anatase TiO₂–Ag₃PO₄ heterostructure with high photocatalytic activity was successfully prepared by a simple method. The Ag₃PO₄ nanoparticles with a diameter of 20–50 nm were deposited on the surface of the spindle-shaped TiO₂. The effect of Ag₃PO₄ nanoparticles amounts on the photocatalytic activity was investigated. The results showed that the TiO₂–Ag₃PO₄ composite with the mass ratio of TiO₂:Ag₃PO₄ = 1:2 displayed the highest photodegradation efficiency of methylene blue (MB) and Bisphenol A (BPA), which was more highly than that of Ag₃PO₄ nanoparticles and also indicated a high stability of photocatalytic degradation. The improved activity of the TiO₂–Ag₃PO₄ composite could be attributed to the efficient separation of the photogenerated electron–hole pairs.     

Fabrication and photocatalytic performance of one-dimensional Ag3PO4 sensitized SrTiO3 nanowire

The 1D Ag₃PO₄ sensitized SrTiO₃ nanowires are prepared by simple route of electrospinning-in situ deposition technique. The results of the thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive Spectrometer (EDS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–Visible diffuse reflectance spectroscopy (UV–Vis) indicate that the Ag₃PO₄ nanoparticles has been deposited on the surface of the SrTiO₃ nanowires successfully. Experimental results showed that compared with pure SrTiO₃, the as-prepared 1D Ag₃PO₄ sensitized SrTiO₃ nanowires exhibit obvious enhancement of photocatalytic performance and stability. Especially, the Ag₃PO₄/SrTiO₃ (3AS sample) had a satisfactory photocatalytic activity for degrading methylene blue (MB) more than 98% under visible light irradiation. As to pure SrTiO₃ and Ag₃PO₄, only 9.8% and 49% of MB was decomposed after 35?min irradiation respectively. Furthermore, the mechanism of the enhancing photocatalytic activity could be ascribed to the nano-heterojunction of the Ag₃PO₄/SrTiO₃, the visible light response of the Ag₃PO₄, and the 1D structure of the nanowires.     

Photocatalytic degradation of Basic Blue 41 dye under visible light over SrTiO3/Ag3PO4 hetero-nanostructures

In an attempt to develop nanostructured photocatalysts with high performance, SrTiO₃/Ag₃PO₄ hetero-nanostructures were successfully fabricated. The formed binary heterojunctions were composed of SrTiO₃ nanotubes prepared using liquid-phase deposition, and Ag₃PO₄ nanoparticles prepared using a sol–gel method. Synthesis details, including morphology, structure, and optical properties of the prepared photocatalysts, were characterized and comparatively discussed. The results showed that at an optimal ratio of SrTiO₃ to Ag₃PO₄ (20–80), the photocatalytic degradation of Basic Blue 41 under 80-min visible light irradiation is the maximum amount of 99%, which is about 4.4 and 1.5 times higher than that of pristine SrTiO₃ nanorods and Ag₃PO₄ nanoparticles, respectively. It can be due to the synergistic effect of two materials that provide high light absorption and charge carriers’ separation. Finally, a detailed possible mechanism for enhancing the photocatalytic activity of the SrTiO₃/Ag₃PO₄ hetero-nanostructures was proposed.     

The construction of TiO2 NTs/Ag3PO4–AgBr by SILAR deposition as promising photocatalysts for hydrogen production and pollutant treatment

The construction of ternary TiO₂ NTs/Ag₃PO₄–AgBr photocatalysts was carried out by the SILAR deposition of Ag₃PO₄ and AgBr on TiO₂ nanotube arrays (TiO₂ NTs) for enhancing the photocatalytic application in H₂ evolution and dyeing wastewater remediation. The adjustment of Ag₃PO₄/AgBr deposition cycles was used to optimize the optical absorption and photocatalytic property. The TiO₂ NTs/Ag₃PO₄–AgBr (5) prepared with 5 cycle deposition of Ag₃PO₄ and AgBr exhibited the optimal photoelectric activity and photocatalytic performances. The photocatalytic rate constants for the degradation of MO, RhB and MB dyes achieved 1.35 × 10⁻², 3.30 × 10⁻² and 4.47 × 10⁻² min⁻¹, respectively, and the visible light-driven photocatalytic H₂ evolution rate achieves 46.87 μmol cm⁻² h⁻¹. •O₂⁻ radicals exhibited the key influence on the organic dye degradation, and the as-prepared photocatalysts showed exceedingly high photocatalytic activity and stability. Furthermore, the photocatalytic mechanism was proposed based on the ESR result.     

Photocatalytic degradation of bisphenol A and dye by graphene-oxide/Ag3PO4 composite under visible light irradiation

A facile, one-step synthesis of graphene-oxide (GO)/Ag₃PO₄ was prepared. The as-prepared samples were characterized by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS) and fourier transformed infrared (FT-IR) spectroscopy. The SEM image indicated that Ag₃PO₄ particles were mainly distributed on the surface of GO sheets uniformly. DRS analysis revealed that the samples had good visible light response. The photocatalytic activity of the composites was evaluated by the degradation of Rhodamine B (RhB) and Bisphenol A (BPA). The results indicated that the photocatalytic performance of GO/Ag₃PO₄ was greatly enhanced after introduction of GO. The photocatalytic degradation efficiency of colorless chemical pollutants (BPA) over GO/Ag₃PO₄ was higher than that of Ag₃PO₄, and the possible degradation path was proposed by liquid chromatography mass spectrometry (LC-MS) analysis. Moreover, the photocatalytic stability was discussed by XRD and FT-IR spectroscopy analysis. Based on the experimental results, a possible visible-light photocatalytic degradation mechanism was also discussed.     

Construction of g-C3N4 nanotube/Ag3PO4 S-scheme heterojunction for enhanced photocatalytic oxygen generation

Heterojunction engineering is considered as a hopeful approach to ameliorate the separation of photogenerated carriers of photocatalysts, realizing efficient water-splitting performance. In this study, an organic-inorganic S-scheme of a one-dimensional g-C₃N₄ nanotube (TCN)/Ag₃PO₄ photocatalytic system with high photocatalytic water oxidation activity was designed by coupling g-C₃N₄ nanotubes over Ag₃PO₄ particles through a chemical coprecipitation method. The TCN/Ag₃PO₄ heterojunction demonstrated excellent photocatalytic O₂ production with an O₂ evolution rate of up to 370.2 μmol·L^?1·h^?1. X-ray photoelectron spectroscopy analysis showed that electron migration between TCN and Ag₃PO₄ led to the formation of an internal electric field pointing from TCN to Ag₃PO₄, which drove the S-scheme charge transfer mode between TCN and Ag₃PO₄. Accordingly, the TCN/Ag₃PO₄ heterojunction possessed fast charge separation and high redox ability, leading to high photoactivity and photostability. This research provides a new strategy for fabricating highly efficient inorganic-organic S-scheme photocatalysts for O₂ production.     

Synthesis,performance and action mechanism of carbon black/Ag3PO4 photocatalysts

Novel carbon black (CB)/Ag₃PO₄ compound photocatalysts were synthesized from a hydrothermal method and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy and electrochemical methods. The photocatalytic oxidation ability of CB/Ag₃PO₄ was evaluated through methyl orange degradation experiments under visible light irradiation. The CB/Ag₃PO₄ showed higher photocatalytic activity than pure Ag₃PO₄. It was indicated the compound catalysts could absorb and utilize more optical energy to improve the photocatalytic activity, which was attributed to the ability of carbon black to accelerate the electron-hole separation. In particular, the methyl orange photocatalytic degradation rate over the 7?mg/L CB/Ag₃PO₄ was 1.6 times that of Ag₃PO₄. And the results of the cyclic experiment show that the photocatalyst has good stability. Moreover, the mechanism about the photocatalytic activity of CB/Ag₃PO₄ compounds was investigated. In this photocatalytic reaction, ?OH was the major active substrate responsible for the visible-light-driven degradation.     

Ag3PO4 quantum dots loaded on the surface of leaf-like InVO4/BiVO4 heterojunction with enhanced photocatalytic activity

Leaf-like InVO₄/BiVO₄ nanoarchitectures with scale of 2 μm–5 μm were prepared by a facile hydrothermal method. Ag₃PO₄ quantum dots (QDs) were then deposited onto the surface of leaf-like InVO₄/BiVO₄ crystals via a simple deposition–precipitation technique. The photocatalytic tests displayed that the Ag₃PO₄/InVO₄/BiVO₄ nanocomposite possesses a much higher rate for degradation of rhodamine B (Rh B) than the sum of BiVO₄, InVO₄, Ag₃PO₄, Ag₃PO₄/InVO₄, Ag₃PO₄/BiVO₄ or InVO₄/BiVO₄ under visible light irradiation. The observed improvement in photocatalytic performance is associated with the extended absorption in the visible light region resulting from the Ag₃PO₄ QD loading, the high specific surface area, and the effective separation of photogenerated carriers at the Ag₃PO₄/InVO₄/BiVO₄ interfaces.     

Synthesis of Ag3PO4–ZnO nanorod composites with high visible-light photocatalytic activity

Ag₃PO₄ nanoparticles with 50–100 nm in size distributed on the surface of ZnO nanorods with ca. 20 nm in diameter and 1–2 μm in length have been synthesized by a facile method. The Ag₃PO₄–ZnO nanorod composites had much higher photocatalytic activity toward degradation of Rhodamine B (RhB) under visible light irradiation than pure ZnO nanorods, and had better recyclability and stability than pure Ag₃PO₄ nanoparticles. The Ag₃PO₄–ZnO nanorod composite with the molar ratio of Ag₃PO₄:ZnO = 1:40 exhibited the highest photodegradation efficiency of RhB (93%), which was 1.5 times of pure ZnO nanorods.     

NiTiO3/Ag3PO4 composites with improved photocatalytic activity under visible-light irradiation

A series of NiTiO₃/Ag₃PO₄ composites were prepared by a simple ion-exchange deposition method. The composition and morphology of the samples were determined by XRD, EDS and SEM. UV–vis DRS was used to characterize their optical absorption properties. The loading of NiTiO₃ could promote the efficient separation of photoinduced electron-hole pairs and enhance the charge carrier transport to improve the photocatalytic activity. The APO-5 composite exhibited the best photocatalytic activity for the degradation of methyl violet (MV). Kinetics studies indicated that the APO-5 composite showed an apparent rate constant of 0.115 min⁻¹, which was 2.61 times that of pure Ag₃PO₄.     

Facile synthesis of Ag3PO4 with the assistance of N,N-dimethylformamid and urea for high performance photocatalysis

Ag₃PO₄ was synthesized with the assistance of N, N-dimethylformamid (DMF) and urea for high performance photocatalysis. The photocatalytic activity of the as-synthesized samples was evaluated by photodegrading rhodamine B (Rh B) under visible light irradiation. As a result, the optimal Ag₃PO₄ synthesized with the assistance of DMF and urea exhibited enhanced photocatalytic activity for Rh B degradation under visible light irradiation. DMF and urea play vital roles in improving the photocatalytic activity of Ag₃PO₄. This study could provide a new perspective for the controllable synthesis of Ag₃PO₄.     

Ag3PO4 quantum dot sensitized BiPO4: A novel p–n junction Ag3PO4/BiPO4 with enhanced visible-light photocatalytic activity

Ag₃PO₄ quantum dot sensitized BiPO₄, a novel p–n junction Ag₃PO₄/BiPO₄ photocatalyst, was prepared by co-precipitation hydrothermal method and characterized by XRD, XPS, SEM, TEM, HRTEM, EDS and DRS. Ag₃PO₄/BiPO₄ exhibited much higher photocatalytic activity than Ag₃PO₄ and BiPO₄ for the degradation of methyl orange under visible light (λ > 420 nm). The enhanced photocatalytic activity of Ag₃PO₄/BiPO₄ could be mainly ascribed to the strong visible-light absorption originating from the quantum dot sensitization of Ag₃PO₄ and high efficient separation of photogenerated electron–hole pairs through Ag₃PO₄/BiPO₄ heterojunction. Moreover, O₂⁻ and OH were the main reactive species.     

Ag3PO4/Bi2WO6 hierarchical heterostructures with enhanced visible light photocatalytic activity for the degradation of phenol

The Ag₃PO₄/Bi₂WO₆ hierarchical heterostructures were prepared by a combination of hydrothermal technique and in situ precipitation method for the first time. The Ag₃PO₄/Bi₂WO₆ hierarchical heterostructures displayed enhanced visible-light photocatalytic activity against phenol. The enhanced photocatalytic activity could be attributed to the effective separation of photogenerated carriers driven by the photoinduced potential difference generated at the Ag₃PO₄/Bi₂WO₆ heterojunction interface. Repetitive tests showed that the Ag₃PO₄/Bi₂WO₆ hierarchical heterostructures maintained high catalytic activity over several cycles, and it had a better regeneration capability under mild conditions.     

Ag3PO4 quantum dots sensitized AgVO3 nanowires: A novel Ag3PO4/AgVO3 nanojunction with enhanced visible-light photocatalytic activity

Ag₃PO₄/AgVO₃ heterojunctions with high photocatalytic activities were synthesized via a simple and practical low-temperature solution-phase route by using AgVO₃ nanowires as substrate materials. The as-prepared Ag₃PO₄/AgVO₃ heterojunctions included Ag₃PO₄ quantum dots assembling uniformly on the surface of AgVO₃ nanowires. Compared with pure AgVO₃ nanowires, Ag₃PO₄/AgVO₃ composite photocatalysts exhibited enhanced photocatalytic activities under visible light irradiation in the decomposition of 4-chlorophenol (4-CP) ethanol solution. The enhanced performance is believed to be induced by the high specific surface area, strong visible-light absorption originating from the quantum dot sensitization of Ag₃PO₄, and high efficient separation of photogenerated electron–hole pairs through Ag₃PO₄/AgVO₃ heterojunction.     

Preparation and characterization of Ag3PO4/BiOI composites with enhanced visible light driven photocatalytic performance

Ag₃PO₄/BiOI composites were successfully prepared by a facial room temperature liquid phase method. Ag₃PO₄ nanoparticles were uniformly distributed on the surface of BiOI nanosheets. The photodegradation tests show that the photocatalytic efficiency was increased at first and then decreased when further increasing Ag₃PO₄ content in the composites. The best photocatalytic performance was obtained for the sample with Ag/Bi ratio of 0.3 and the photodegradation efficiency of Ag₃PO₄/BiOI was nearly 10 times that of BiOI. The enhanced photocatalytic activity of the composites was due to the improved photogenerated carrier separation capacity, being induced by the coupling effects of the two semiconductors.     

Z-scheme AgSCN/Ag3PO4/C3N4 heterojunction with excellent photocatalytic degradation of ibuprofen

To develop a novel photocatalyst with high catalytic performance under sunlight, AgSCN/Ag₃PO₄/C₃N₄ heterojunction photocatalyst with Z-mechanism has been prepared, which demonstrates excellent photocatalytic performance for ibuprofen degradation. The catalytic activity of AgSCN/Ag₃PO₄/C₃N₄ is 1.5 and 3.3 times that of AgSCN/Ag₃PO₄ and Ag₃PO₄, respectively. The cyclic degradation number of AgSCN/Ag₃PO₄/C₃N₄ increases to seven because of the protection of AgSCN and C₃N₄ to Ag₃PO₄. The excellent photocatalytic performance of the AgSCN/Ag₃PO₄/C₃N₄ is attributed from the Z-mechanism with efficient separation efficiency of electron hole pair.     

The stabilization effect of surface capping on photocatalytic activity and recyclable stability of Ag3PO4

We find the stabilization effect of surface capping on the adsorption capacity and photocatalytic activity of Ag₃PO₄ in the recycling. The citrate anion complex (CAC) as the surface capping is confirmed to be constituted by citrate anion and silver citrate complex. The adsorption capacity of Ag₃PO₄ with CAC capping exhibits little increase in the subsequent cycle, whereas the one of the bare Ag₃PO₄ decreases by 25.8% for methylene blue (MB). The photocatalytic activity of Ag₃PO₄ with CAC capping is maintained, compared to marked 10% decrease of bare Ag₃PO₄ for degrading MB.     

One step synthesis of Ag/Ag3PO4/BiPO4 double-heterostructured nanocomposites with enhanced visible-light photocatalytic activity and stability

Heterogeneous Ag/Ag₃PO₄/BiPO₄ photocatalyst was synthesized by a one-step low temperature chemical bath method and exhibited better photocatalytic activity and better stability than those of individual Ag₃PO₄ or BiPO₄ nanoparticles for photodegradation of organic compounds (Rhodamine B) in the absence of electron accepters under visible light (λ>420 nm). The enhanced photocatalytic performance is mainly ascribed to the strong visible-light absorption originating from high efficient separations of photogenerated electron–hole pairs through Ag₃PO₄/BiPO₄ and Ag/Ag₃PO₄ heterostructures.     

Enhanced photocatalytic activity of La1-xSrxCoO3/Ag3PO4 induced by the synergistic effect of doping and heterojunction

This study sought to design and synthesize a series of perovskite-based La_1-xSr_xCoO₃/Ag₃PO₄ (with x = 0–1) heterojunction photocatalysts with different Strontium (Sr) doping contents by a simple sol-gel method and properties of the material were comprehensively characterized. Moreover, tetracycline (TC) was chosen as the target pollutant to assess the effect of Sr doping on the catalytic performance of LaCoO₃/Ag₃PO₄. Our results demonstrated that the partial replacement of La³⁺ with Sr²⁺ coupled with shifting Co³⁺ to the mixed-valence state of Co³⁺-Co⁴⁺ led to the formation of substantially more oxygen vacancies in the crystal lattice of La_1-xSr_xCoO₃/Ag₃PO₄. Therefore, the doped catalyst La_1-xSr_xCoO₃/Ag₃PO₄ exhibited enhanced photocatalytic performance. When x = 0.9, the obtained La_0·1Sr_0·9CoO₃/Ag₃PO₄ exhibit an optimal performance for TC degradation. Kinetic analyses demonstrated that the degradation rate constant of TC in La_0·1Sr_0·9CoO₃/Ag₃PO₄ system was 0.0098 min^?1, which is 1.78 times that of LaCoO₃/Ag₃PO₄, and 2.45 times that of SrCoO₃/Ag₃PO₄. Additionally, free radical sequestration experiments indicated that OH^?, h⁺, and O₂^?? all participated in the degradation of TC in the following order: h⁺>O₂^??>OH^?. Finally, analyses of photocatalytic mechanisms suggested that the enhanced photocatalytic activity of La_0·1Sr_0·9CoO₃/Ag₃PO₄ was due to its strong electron transfer properties and the formation of substantially more surface oxygen vacancies in Sr-doped La_0·1Sr_0·9CoO₃.     

BiOCl/Ag3PO4 Composites with Highly Enhanced Ultraviolet and Visible Light Photocatalytic Performances

The BiOCl/Ag₃PO₄ composites have been prepared via a facile and reproducible route. In the composite, Ag₃PO₄ particles are deposited on the surface of plates of BiOCl. Among the as‐prepared samples, the ultraviolet (UV) and visible light photocatalytic reaction rates of BiOCl/Ag₃PO₄ composite with the ratio of 1:0.1 are about 4.4 times and 4.5 times than that of pure BiOCl, respectively. Overall, the BiOCl/Ag₃PO₄ composites not only show highly enhanced visible light photocatalytic activity but also exhibit highly improved UV photocatalytic activity, which could find enormous potential application in addressing environmental protection issues utilizing solar energy effectively.