The decrease of depolarization temperature and the improvement of pyroelectric properties by doping Ta in lead-free 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics

Ta-doped lead-free 0.94NBT-0.06BT-xTa (x=0.0–1.0%) ceramics were synthesized by a conventional solid-state route. XRD shows that the compositions are at a morphotropic phase boundary where rhombohedral and tetragonal phases coexist. The depolarization temperature (T_d) shifted to lower temperature with the increase of Ta content. The pyroelectric coefficient (p) of doped ceramics greatly enhanced compared with undoped material and reached a maximum of 7.14×10⁻⁴ C m⁻² °C⁻¹ at room temperature (RT) and 146.1×10⁻⁴ C m⁻² °C⁻¹ at T_d at x=0.2%. The figure of merits, F_i and F_v, also showed a great improvement from 1.12×10⁻¹⁰ m v⁻¹ and 0.021 m² C⁻¹ at x=0.0 to 2.55×10⁻¹⁰ m v⁻¹ and 0.033 m² C⁻¹ at x=0.2% at RT. Furthermore, F_i and F_v show the huge improvement to 52.2×10⁻¹⁰ m v⁻¹ and 0.48×10⁻¹⁰ m v⁻¹ respectively at T_d at x=0.2%. F_C shows a value between 2.26 and 2.42 ×10⁻⁹ C cm⁻² °C⁻¹ at RT at x=0.2%. The improved pyroelectric properties make NBT-0.06BT-0.002Ta ceramics a promising infrared detector material.     

Effect of Nd-doping on structural,thermal and electrochemical properties of LaFe0.5Cr0.5O3 perovskites

The structural, thermal and electrochemical properties of the perovskite-type compound La_1−xNd_xFe_0.5Cr_0.5O₃ (x=0.10, 0.15, 0.20) are investigated by X-ray diffraction, thermal expansion, thermal diffusion, thermal conductivity and impedance spectroscopy measurements. Rietveld refinement shows that the compounds crystallize with orthorhombic symmetry in the space group Pbnm. The average thermal expansion coefficient decreases as the content of Nd increases. The average coefficient of thermal expansion in the temperature range of 30–850 °C is 10.12×10⁻⁶, 9.48×10⁻⁶ and 7.51×10⁻⁶ °C⁻¹ for samples with x=0.1, 0.15 and 0.2, respectively. Thermogravimetric analyses show small weight gain at high temperatures which correspond to filling up of oxygen vacancies as well as the valence change of the transition metals. The electrical conductivity measured by four-probe method shows that the conductivity increases with the content of Nd; the electrical conductivity at 520 °C is about 4.71×10⁻³, 6.59×10⁻³ and 9.62×10⁻³ S cm⁻¹ for samples with x=0.10, 0.15 and 0.20, respectively. The thermal diffusivity of the samples decreases monotonically as temperature increases. At 600 °C, the thermal diffusivity is 0.00425, 0.00455 and 0.00485 cm² s⁻¹ for samples with x=0.10, 0.15 and 0.20, respectively. Impedance measurements in symmetrical cell arrangement in air reveal that the polarization resistance decreases from 55 Ω cm⁻² to 22.5 Ω cm⁻² for increasing temperature from 800 °C to 900 °C, respectively.     

Oxygen ionic transport in SrFe1−yAlyO3−δ and Sr1−xCaxFe0.5Al0.5O3−δ ceramics

The oxygen permeability of mixed-conducting Sr_1−xCa_xFe_1−yAl_yO_3−δ (x=0–1.0; y=0.3–0.5) ceramics at 850–1000 °C, with an apparent activation energy of 120–206 kJ/mol, is mainly limited by the bulk ionic conduction. When the membrane thickness is 1.0 mm, the oxygen permeation fluxes under pO₂ gradient of 0.21/0.021 atm vary from 3.7×10⁻¹⁰ mol s⁻¹ cm⁻² to 1.5×10⁻⁷ mol s⁻¹ cm⁻² at 950 °C. The maximum solubility of Al³⁺ cations in the perovskite lattice of SrFe_1−yAl_yO_3−δ is approximately 40%, whilst the brownmillerite-type solid solution formation range in Sr_1−xCa_xFe_0.5Al_0.5O_3−δ system corresponds to x>0.75. The oxygen ionic conductivity of SrFeO₃-based perovskites decreases moderately on Al doping, but is 100–300 times higher than that of brownmillerites derived from CaFe_0.5Al_0.5O_2.5+δ. Temperature-activated character and relatively low values of hole mobility in SrFe_0.7Al_0.3O_3−δ, estimated from the total conductivity and Seebeck coefficient data, suggest a small-polaron mechanism of p-type electronic conduction under oxidising conditions. Reducing oxygen partial pressure results in increasing ionic conductivity and in the transition from dominant p- to n-type electronic transport, followed by decomposition. The low-pO₂ stability limits of Sr_1−xCa_xFe_1−yAl_yO_3−δ seem essentially independent of composition, varying between that of LaFeO_3−δ and the Fe/Fe_1−γO boundary. Thermal expansion coefficients of Sr_1−xCa_xFe_1−yAl_yO_3−δ ceramics in air are 9×10⁻⁶ K⁻¹ to 16×10⁻⁶ K⁻¹ at 100–650 °C and 12×10⁻⁶ K⁻¹ to 24×10⁻⁶ K⁻¹ at 650–950 °C. Doping of SrFe_1−yAl_yO_3−δ with aluminum decreases thermal expansion due to decreasing oxygen nonstoichiometry variations.     

Enhanced electrocaloric,pyroelectric and energy storage performance of BaCexTi1−xO3 ceramics

BaCe_xTi_1−xO₃ (BCT) ceramics with compositions x = 0, 0.1, 0.12 and 0.15 were synthesized using conventional solid state reaction route. Systematic exploration of enhancing electrocaloric effect (ECE) in BaTiO₃ by rare earth dopant Ce is presented. BaCe_0.12Ti_0.88O₃ exhibited an electrocaloric strength of ∼0.35 K m/MV at 351 K, which caters the need for a series of high-level ECE material. Further, the temperature dependence of pyroelectric coefficient is established for all compositions. The pyroelectric figure of merits (FOMs) for current responsivity (F_i), voltage responsivity (F_v), detectivity (F_d) and energy harvesting (F_e and F_e^*) are calculated and the results reveal that x = 0.1 could be a technologically superior candidate for pyroelectric devices. Further, BaCe_0.15Ti_0.85O₃ exhibited highest electrical energy storage performance of 115 kJ/m³ compared with 71 kJ/m³ in BaTiO₃. Our findings in this work may provide a better understanding for developing high ECE materials combined with pyroelectric and energy storage performance of Ce substituted BaTiO₃ ceramics.     

Induced anisotropic behavior and enhanced electrical properties on hot-pressed strontium barium niobate ceramics

Sr_0.30Ba_0.70Nb₂O₆ (SBN30) ferroelectric ceramics were fabricated by conventional sintering (CS) and by hot-pressing sintering (HP) and their crystal structure, microstructure, dielectric, ferroelectric and pyroelectric properties were studied and compared. Preferred orientation of the HP ceramics was detected through X-ray diffraction. Dense microstructure virtually free of pores has been achieved in HP samples. Moreover, the HP samples manifested prominent anisotropy in electrical properties. Besides, the relative permittivity (ε_r), saturated polarization (P_s), pyroelectric coefficient (p) in the direction perpendicular to the pressing axis were much higher than those of the randomly oriented CS samples. The HP samples sintered under 200 MPa show excellent pyroelectric properties in the direction perpendicular to the pressing axis, with pyroelectric coefficient of 2.38×10⁻⁸C/cm²K and pyroelectric figure of merit of F_i=1.13 pm/V, F_v=1.89 m²/C and F_d=0.63 μPa^−1/2,which roughly triple the values obtained in CS samples. These results indicate that hot-pressing is a viable option for accessing single-crystal-like anisotropy as well as enhanced electrical properties in polycrystalline ceramics, thus unveiling the distinctive potential of HP SBN30 ceramics for infrared detector applications.     

High pyroelectric response in Pb0.99Nb0.02[(Zr0.57Sn0.43)1−xTix]0.98O3 ceramics

Both high pyroelectric coefficient and figure of merits of ferroelectric materials are desirable for infrared detection. In this work, we prepared Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_1−xTi_x]_0.98O₃ (0.060 ≤ x ≤ 0.080) ceramics, and the microstructure and electric properties were studied systematically. It is observed that the composition x = 0.07 shows enhanced pyroelectric properties around ambient temperature due to the ferroelectric–antiferroelectric phase transition, with the pyroelectric coefficient p = 6.83 × 10⁻⁴ C m⁻² K⁻¹ and the figures of merit F_i = 5.04 × 10⁻¹⁰ m V⁻¹, F_v = 7.61 × 10⁻² m² C⁻¹, and F_d = 3.46 × 10⁻⁵ Pa^−1/2 at room temperature and the highest pyroelectric coefficient of 695.5 × 10⁻⁴ C m⁻² K⁻¹ and F_i = 1410.46 × 10⁻¹⁰ m V⁻¹, F_v = 1587.39 × 10⁻² m² C⁻¹, and F_d = 1182.94 × 10⁻⁵ Pa^−1/2 at 36.7°C. These values are superior to other pyroelectric materials. These results indicate that this system is a promising pyroelectric material for the applications of infrared detectors.     

Pyroelectric,ferroelectric, piezoelectric and dielectric properties of Na0.5Bi0.5TiO3 ceramic prepared by sol-gel method

Sodium bismuth titanate (BNT) nanopowder of molar composition 50/50 (Na_0.5Bi_0.5TiO₃) was prepared by a sol-gel processing method. The structure and microstructure of the precursor gel as well as the ferroelectric, pyroelectric, dielectric and piezoelectric properties of the BNT were studied. BNT crystallized in the rhombohedra perovskites structure Na_0.5Bi_0.5TiO₃ was obtained from the precursor gel by heating at 700 °C for 2 h in air. The BNT ceramic at 1100 °C sintering temperature present high crystallinity, good dielectric properties at 1 kHz (ε′=885, tan δ=0.03, T_c=370 °C), piezoelectric properties (k₃₃=0.39, c₃₃=105 GPa, e₃₃=12.6 C/m², d₃₃=120 pC/N), high remnant polarization (P_r=47 μC/cm²) and pyroelectric coefficient ($p$=707 μC/m² K) and low coercive field (E_c=55 kV/cm). Hence, the BNT prepared by sol-gel method could be used for silicon based memory device application where a low synthesis temperature is a key requirement.     

Temperature-insensitive dielectric and piezoelectric properties in (1-x)K0.5Na0.5Nb0.997Cu0.0075O3-xSrZrO3 ceramics

Systematic investigation on phase transition, dielectric and piezoelectric properties of (1-x)K_0.5Na_0.5Nb_0.997Cu_0.0075O₃-xSrZrO₃ (x = 0, 0.03, 0.06, 0.09, 0.12, 0.15, abbreviated as KNNC-100xSZ) ceramics was carried out. Due to the coexistence of orthorhombic and tetragonal phase in a wide temperature range, a diffused polymorphic phase transition (PPT) region was achieved in KNNC with x ≥ 0.06. KNNC-12SZ ceramics exhibited high dielectric permittivity (∼1679), low dielectric loss (∼0.02) and small variation (Δe'/ε'_25 °C ≤ 15%) in dielectric permittivity from −78 °C to 237.3 °C. KNNC-6SZ ceramic possessed a high level of unipolar strain (∼0.15%) and maintained a smaller variation of ±12% under the corresponding electric field of 60 kV cm⁻¹ at 10 Hz from 25 °C to 175 °C. d₃₃^*, which was calculated according to the unipolar strain at 60 kV cm⁻¹, was 230 pm V⁻¹ and remained stable below 100 °C. Therefore, our work provided a new promising candidate for temperature-insensitive capacitors and piezoelectric actuators.     

High pyroelectric performance in Pb0.99Nb0.02[(Zr0.57Sn0.43)0.94Ti0.06]0.98O3/Al2O3 composites by design

High pyroelectric performance around human body temperature is essential for ultra-sensitive infrared detectors of medical systems. Herein, toward human health monitoring, composite ceramics (1-x)Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_0.94Ti_0.06]_0.98O₃/xAl₂O₃ (x = 0, 0.1, and 0.2) were designed. A metastable ferroelectric (FE) phase was induced in the anti-FE matrix by the Al₂O₃ component-induced internal stress, and in turn FE-anti-FE phase boundary was constructed. The ceramics at x = 0.2 exhibit high pyroelectric coefficient with p = 10.9 × 10⁻⁴ C·m⁻²·K⁻¹ and figures of merit with current responsivity F_i = 6.23 × 10⁻¹⁰ m·V⁻¹, voltage responsivity F_v = 12.71 × 10⁻² m²·C⁻¹, and detectivity F_d = 7.03 × 10⁻⁵ Pa^−1/2 around human body temperature. Moreover, the enhanced pyroelectric coefficients exist in a broad operation temperature range with a large full width at half maximums of 18.5°C and peak value of 29.2 × 10⁻⁴ C·m⁻²·K⁻¹ at 48.2°C. The designed composite ceramic is a promising candidate for infrared thermal imaging technology of noncontact human health monitoring system.     

Nitrate–citrate combustion synthesis of Ce1−xGdxO2−x/2 powder and its characterization

The structure, thermal expansion coefficients, and electric conductivity of Ce_1−xGd_xO_2−x/2 (x = 0–0.6) solid solution, prepared by the gel-combustion method, were investigated. The uniform small particle size of the gel-combustion prepared materials allows sintering into highly dense ceramic pellets at 1300 °C, a significantly lower temperature compared to that of 1600–1650 °C required for ceria solid electrolytes prepared by traditional solid state techniques. XRD showed that single-phase solid solutions formed in all the investigated range. The maximum conductivity, σ_600 °C = 5.26 × 10⁻³ S/cm, was found at x = 0.2. The thermal expansion coefficient, determined from high-temperature X-ray data, was 8.125 × 10⁻⁶ K⁻¹ at x = 0.2.     

The phase stability and thermophysical properties of InFeO3(ZnO)m (m = 2, 3, 4, 5)

The phase stability and thermophysical properties of InFeO₃(ZnO)_m (m = 2, 3, 4, 5) compounds were investigated, which are a general family of homologous layered compounds with general formula InFeO₃(ZnO)_m (m = 1–19). InFeO₃(ZnO)_m (m = 2, 3, 4, 5) ceramics were synthesized using cold pressing followed by solid-state sintering. They revealed an excellent thermal stability after annealing at 1450 °C for 48 h. No phase transformation occurred during heating to 1400 °C. InFeO₃(ZnO)₃ exhibited a thermal conductivity of 1.38 W m⁻¹ K⁻¹ at 1000 °C, which is about 30% lower than that of 8 wt.% yttria stabilized zirconia (8YSZ) thermal barrier coatings. The thermal expansion coefficients (TECs) of InFeO₃(ZnO)m bulk ceramics were in a range of (10.97 ± 0.33) × 10⁻⁶ K⁻¹ to (11.46 ± 0.35) × 10⁻⁶ K⁻¹ at 900 °C, which are comparable to those of 8YSZ ceramics.     

Enhanced pyroelectric properties in (Bi0.5Na0.5)TiO3–BiAlO3–NaNbO3 ternary system lead‐free ceramics

High pyroelectric performance and good thermal stability of pyroelectric materials are desirable for the application of infrared thermal detectors. In this work, enhanced pyroelectric properties were achieved in a new ternary (1?x)(0.98(Bi_0.5Na_0.5)(Ti_0.995Mn_0.005)O₃–0.02BiAlO₃)–xNaNbO₃ (BNT–BA–xNN) lead‐free ceramics. The effect of NN addition on the microstructure, phase transition, ferroelectric, and pyroelectric properties of BNT–BA–xNN ceramics were investigated. It was found that the average grain size decreased as x increased to 0.03, whereas increased with further NN addition. The pyroelectric coefficient p at room temperature (RT) was significantly increased from 3.87 × 10^?8Ccm^?2K^?1 at x = 0 to 8.45 × 10^?8Ccm^?2K^?1 at x = 0.03. The figures of merit (FOMs), F_i, F_v and F_d, were also enhanced with addition of NN. Because of high p (7.48 × 10^?8Ccm^?2K^?1) as well as relatively low dielectric permittivity (~370) and low dielectric loss (~0.011), the optimal FOMs at RT were obtained at x = 0.02 with F_i = 2.66 × 10^?10 m/V, F_v = 8.07 × 10^?2 m²/C, and F_d = 4.22 × 10^?5 Pa^?1/2, which are superior to other reported lead‐free ceramics. Furthermore, the compositions with x ≤ 0.03 exhibited excellent temperature stability in a wide temperature range from 20 to 80°C because of high depolarization temperature (≥110°C). Those results unveil the potential of BNT–BA–xNN ceramics for infrared detector applications.     

Enhanced pyroelectric performance in potassium sodium niobate-based ceramics via multisymmetries coexistence design

Achieving excellent pyroelectric performance remains a challenge for lead-free piezoelectric ceramics. To meet the requirements of both an enhanced pyroelectric coefficient at room temperature and good thermal stability during the encapsulation of pyroelectric devices, (1–x)K_0.48Na_0.52NbO₃–xBi_0.5Ag_0.5ZrO₃–0.2%Fe₂O₃ (KNN–BAZ–Fe) lead-free ferroelectric ceramics with high Curie temperatures were prepared to obtain improved pyroelectric performance via the coexistence of multiple symmetries. The variation of BAZ content led to the formation of rhombohedral–orthorhombic–tetragonal phase boundary and promoted grain growth, resulting in the best pyroelectric coefficient (p = 5.09 × 10⁻⁴ C m⁻²°C⁻¹) and enhanced figures of merit (F_i = 0.2084 × 10⁻⁹ (m V⁻¹), F_v = 0.0142 m² C⁻¹, F_d = 0.0947 × 10⁻⁴ Pa^−1/2, and F_e = 17.66 J m⁻³ K⁻²) for infrared (IR) detection when x = 0.05. The room-temperature pyroelectric coefficient obtained in this study is approximately four times that of the pure KNN ceramic and is the maximum value reported for niobate-based piezoelectric ceramics. Moreover, compared with the poor thermal stability of barium titanate- and bismuth sodium titanate-based ceramics because of their ultralow Curie temperature or thermal depolarization temperature, the ceramics investigated here exhibit much better thermal stability because of their high Curie temperature (T_C > 300°C) and diffused phase-transition behavior, making them more adaptable for practical applications. These results suggest that KNN–xBAZ–Fe ceramics are attractive candidates for applications in the field of IR sensors.     

Influence of Yb3+ doping on phase stability and thermophysical properties of (Y1-xYbx)3Al5O12 under high temperature

In this work, Yb³⁺ was selected to replace the Y³⁺ in yttrium aluminum garnet (YAG) in order to reduce its thermal conductivity under high temperature. A series of (Y_1-xYb_x)₃Al₅O₁₂ (x=0, 0.1, 0.2, 0.3, 0.4) ceramics were prepared by solid-state reaction at 1600 °C for 10 h. The microstructure, thermophysical properties and phase stability under high temperature were investigated. The results showed that all the Yb doped (Y_1-xYb_x)₃Al₅O₁₂ ceramics were comprised of a single garnet-type Y₃Al₅O₁₂ phase. The thermal conductivities of (Y_1-xYb_x)₃Al₅O₁₂ ceramics firstly decreased and subsequently increased with Yb ions concentration rising from room temperature to 1200 °C. (Y_0.7Yb_0.3)₃Al₅O₁₂ had the lowest thermal conductivity among investigated specimens, which was about 1.62 W m⁻¹ K⁻¹ at 1000 °C, around 30% lower than that of pure YAG (2.3 W m⁻¹ K⁻¹, 1000 °C). Yb had almost no effect on the coefficients of thermal expansion (CTEs) of (Y_1-xYb_x)₃Al₅O₁₂ ceramics and the CTE was approximate 10.7×10⁻⁶ K⁻¹ at 1200 °C. In addition, (Y_0.7Yb_0.3)₃Al₅O₁₂ ceramic remained good phase stability when heating from room temperature to 1450 °C.     

Synthesis of BaCeO3 and BaCe0.9Y0.1O3−δ from mixed oxalate precursors

An oxalate precipitation route is proposed for the synthesis of BaCe_1−xY_xO₃ (x = 0 and 0.1) after calcination at 1100 °C. The precipitation temperature (70 °C) was a determinant parameter for producing a pure perovskite phase after calcination at 1100 °C for 1 h. TG/DTA measurements showed that the co-precipitated (Ba, Ce and Y) oxalate had a different thermal behaviour from single oxalates. Despite a simple grinding procedure, sintered BaCe_0.9Y_0.1O_3−δ pellets (1400 °C, 48 h) presented 90.7% of relative density and preliminary impedance measurements showed an overall conductivity of around 2 × 10⁻⁴ S cm⁻¹ at 320 °C.     

Achieving single domain in rhombohedral and tetragonal Mn-doped Pb(In1/2Nb1/2)-Pb(Mg1/3Nb2/3)-PbTiO3 crystals for infrared detecting applications

The [111]-oriented rhombohedral Mn-doped 0.15Pb(In_1/2Nb_1/2)-0.55Pb(Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ (Mn:PIMNT(15/55/30)) crystal and the [001]-oriented tetragonal Mn-doped 0.29Pb(In_1/2Nb_1/2)-0.29Pb(Mg_1/3Nb_2/3)O₃-0.42PbTiO₃ (Mn:PIMNT(29/29/42)) crystal were poled under different conditions. The pyroelectric performance of the two crystals as a function of poling temperature, as well as the relationship with ferroelectric domain configuration and phase structure was investigated systematically. The pyroelectric properties of the two crystals enhance with rising the poling temperature, which can be attributed to the improvement of the single state. And for the rhombohedral Mn:PIMNT(15/55/30) crystal locating near morphotropic phase boundary (MPB), the increase of tetragonal phase induces the deterioration of pyroelectric properties. Due to more residual tetragonal phase, the pyroelectric coefficient of the Mn:PIMNT(15/55/30) crystal poled at 150°C is lower than that poled at 100°C. In general, both the crystals poled above T_C achieve nearly single state, exhibiting the best pyroelectric properties with relatively high Curie temperature (T_C), where P = 9.71 × 10⁻⁴ C m⁻² K⁻¹, F_i = 3.88 × 10⁻¹⁰ m V⁻¹, F_v = 0.068 m² C⁻¹ and F_d = 29.7 × 10⁻⁵ Pa^−1/2 for the rhombohedral Mn:PIMNT(15/55/30) crystal (T_C = 171°C) and P = 6.78 × 10⁻⁴ C m⁻² K⁻¹, F_i = 2.71 ×10⁻¹⁰ mV⁻¹, F_v = 0.1 m² C⁻¹, F_d = 23.54 × 10⁻⁵ Pa^−1/2 for the tetragonal Mn:PIMNT(29/29/42) single crystal (T_C = 251°C), meeting the stable operation of infrared detector at relatively high environmental temperatures.     

Investigations of BaFe0.5Nb0.5O3 nano powders prepared by a low temperature aqueous synthesis and resulting ceramics

A facile method to prepare nanoscaled BaFe_0.5Nb_0.5O₃ via synthesis in boiling NaOH solution is described herein. The nano-crystalline powder has a high specific surface area of 55 m² g⁻¹ and a crystallite size of 15 nm. The as-prepared powder does not show any significant crystallite growth up to 700 °C. The activation energy of the crystallite growth process was calculated as 590 kJ mol⁻¹. Dense ceramics can be obtained either after sintering at 1200 °C for 1 h or after two-step sintering at 1000 °C for 10 h. The average grain sizes of ceramic bodies can be tuned between 0.23 μm and 12 μm. The thermal expansion coefficient was determined as 11.4(3)·10⁻⁶ K⁻¹. The optical band gap varies between 2.90(5) and 2.63(3) eV. Magnetic measurements gave a Néel temperature of 20 K. Depending on the sintering regime, the ceramic samples reach permittivity values between 2800 and 137,000 at RT and 1 kHz.     

Significantly enhanced pyroelectric performance in novel sodium niobate-based lead-free ceramics by compositional tuning

In this study, (1 − x)NaNbO₃–xBa_0.6(Bi_0.5K_0.5)_0.4TiO₃ (abbreviated as NN-xBBKT, x = 0.05, 0.10, 0.15, and 0.20) lead-free pyroelectric ceramics were synthesized by conventional solid-state reaction method. Moreover, their microstructure, phase structure, dielectric, ferroelectric, piezoelectric, and pyroelectric characteristics were studied systematically. The X-ray diffraction result showed that the phase structure of NN-xBBKT ceramics changed from orthorhombic to tetragonal and finally became pseudocubic symmetry. The ferroelectric-paraelectric phase transition temperature and depolarization temperature shifted to lower temperature with the increase in BBKT content. Furthermore, with increasing BBKT content, piezoelectric coefficient, figures of merit, and pyroelectric coefficient first increased and then decreased. The optimum pyroelectric properties (eg F_d = 0.81 × 10⁻⁵ Pa^−1/2, F_v = 1.02 × 10⁻² m² C⁻¹, F_i = 1.04 × 10⁻¹⁰ m V⁻¹, and p = 3.11 × 10⁻⁸ C cm⁻² K⁻¹) were observed in sample composition with x = 0.15. More importantly, the pyroelectric coefficient of ceramic with x = 0.15 also displayed relatively high thermal stability because of high depolarization temperature (~110°C). These parameters demonstrate that the novel Pb-free NaNbO₃-based ceramics form an important class of pyroelectric material with broad range of application prospect.     

Ionic conductivity of Mn2+ doped dense tin pyrophosphate electrolytes synthesized by a new co-precipitation method

Mn²⁺-doped Sn_1−xMn_xP₂O₇ (x = 0–0.2) are synthesized by a new co-precipitation method using tin(II)oxalate as tin(IV) precursor, which gives pure tin pyrophosphate at 300 °C, as all the reaction by-products are vaporizable at <150 °C. The dopant Mn²⁺ acts as a sintering aid and leads to dense Sn_1−xMn_xP₂O₇ samples on sintering at 1100 °C. Though conductivity of Sn_1−xMn_xP₂O₇ samples in the ambient atmosphere is 10⁻⁹–10⁻⁶ S cm⁻¹ in 300–550 °C range, it increases significantly in humidified (water vapor pressure, pH₂O = 0.12 atm) atmosphere and reaches >10⁻³ S cm⁻¹ in 100–200 °C range. The maximum conductivity is shown by Sn_0.88Mn_0.12P₂O₇ with 9.79 × 10⁻⁶ S cm⁻¹ at 550 °C in ambient air and 2.29 × 10⁻³ S cm⁻¹ at 190 °C in humidified air. It is observed that the humidification of Sn_1−xMn_xP₂O₇ samples is a slow process and its rate increases at higher temperature. The stability of Sn_1−xMn_xP₂O₇ samples is analyzed.     

Dielectric,ferroelectric and field-induced strain behavior of K0.5Na0.5NbO3-modified Bi0.5(Na0.78K0.22)0.5TiO3 lead-free ceramics

Lead-free piezoelectric (1 ? x)Bi_0.5(Na_0.78K_0.22)_0.5TiO₃–xK_0.5Na_0.5NbO₃ (BNKT–xKNN, x = 0–0.10) ceramics were synthesized using a conventional, solid-state reaction method. The effect of KNN addition on BNKT ceramics was investigated through X-ray diffraction (XRD), dielectric, ferroelectric and electric field-induced strain characterizations. XRD revealed a pure perovskite phase with tetragonal symmetry in the studied composition range. As the KNN content increased, the depolarization temperature (T_d) as well as maximum dielectric constant (?_m) decreased. The addition of KNN destabilized the ferroelectric order of BNKT ceramics exhibiting a pinched-type hysteresis loop with low remnant polarization (11 μC/cm²) and small piezoelectric constant (27 pC/N) at 3 mol% KNN. As a result, at x = 0.03 a significant enhancement of 0.22% was observed in the electric field-induced strain, which corresponds to a normalized strain (S_max/E_max) of ～434 pm/V. This enhancement is attributed to the coexistence of ferroelectric and non-polar phases at room temperature.