吉安散装人抗冰战雪保平安——江西吉安散办干部职工铲除冰保畅通纪实

春节前后,吉安市遭遇到罕见的冰冻雨雪灾害天气,连续出现了低温、阴雨和雨夹雪,成为全省灾情最严重地区之一.特别是1月25日以后,出现了持续大范围的雨雪冰冻天气.冰冻损坏了市区的电网,压垮了树枝,封锁了道路和桥梁.     

欧文斯科宁专访

欧文斯科宁公司(以下简称OC)创建66年来一直致力于开发玻璃纤维的新用途,是建筑材料和复合材料行业的领先创新者和制造商,OC进入亚太市场也已超过30年,长久以来他们专注于推广复合材料的应用领域以及扩大其供应基地.最近,欧文斯科宁在印度扩充了生产能力,并在上海设立了技术中心.至今为止,欧文斯科宁在亚太区已有超过1800名员工,从事建筑材料和复合材料的生产,销售和研发工作.     

2010～2011年世界塑料工业进展

收集了2010年7月～2011年6月世界塑料工业的相关资料,介绍了2010～2011年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚氯乙烯、聚苯乙烯、ABS树脂),工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚),特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮),通用热固性树脂(酚醛、不饱和聚酯树脂、环氧树脂、聚氨酯)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍。     

花粉症诱因探究

花粉症又称季节性鼻炎或枯草热,是敏感个体对花粉的一种超敏反应.在美国,每一百个人当中就有两个以上的人患花粉症;现在日本有1300万人饱受花粉症折磨,超过总人口的10%[1].我国的发病率为0.5%～1%,高发区达到5%,虽没有上述一些国家那么严重,受害者亦相当可观.全世界花粉症发病人数到1999年就已有5000多万[2],可见花粉症患者是一个绝不可轻视的群体.图1显示了花粉过敏症的发病机制.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

回转窑耐火砖的砌筑及使用

我公司回转窑规格为Φ4.0m×60m.窑内使用的耐火砖为镁铬砖、隔热尖晶石、蓝晶石和黏土砖以及硅莫砖.镁铬砖规格为(81×90×150×200)mm,其它耐火砖规格皆为(81×90×200×200)mm.尽管每个品种的砖品质相同,但由于在镶砌和使用过程中方法不同,寿命有长有短.通过多年实践,现总结如下.     

硅酸钠缓蚀剂的研究现状与展望

硅酸盐资源丰富,无毒,价廉,不繁殖细菌,是一种对环境友好的缓蚀剂.近年来研究的以硅酸盐为主的缓蚀剂复合配方,大大提高了硅酸盐缓蚀剂的应用范围.目前,开发缓蚀剂复合配方已成为一种发展趋势.本文综述了硅酸钠缓蚀剂的应用现状,并对其发展作了展望.     

论啤酒瓶质量与啤酒灌装的协调和统一

为了使啤酒瓶质量与啤酒灌装质量协调统一,探讨了啤酒瓶外形设计、剩余空间和瓶壁厚度与瓶子强度和灌装质量的关系,提出啤酒瓶企业定点向啤酒企业供瓶,两企业协作互动,了解相关的技术、设备性能和工艺流程,以利同步发展.     

化妆品行业如何应对REACH法规

2006年12月7日～2006年12月8日化妆品化学家年会在美国纽约举行,该年会为化学品供应商提供了参与REACH法规的机会.REACH法规的实施引起了业界的广泛关注,来自世界各地的著名化学品及化妆品公司对REACH法规的实施所带来的一些问题,以及新原料、新技术进行了交流.会议主要对就REACH法规、制造及规模化和神经美容品等方面展开了研讨.     

ACR对PVC加工性能的影响

详细研究了丙烯酸酯类PVC加工助剂———ACR的特性黏度、组成对PVC共混物加工性能的影响。结果表明,随着甲基丙烯酸甲酯用量的下降和丙烯酸丁酯用量的提高,其塑化速度增大,但熔体强度降低,在组成相同的情况下,特性黏度越大,塑化越慢,熔体强度越大;丙烯酸酯类加工助剂对PVC制品的拉伸强度和维卡软化点无明显影响,高黏度的加工助剂有提高PVC制品拉伸强度和维卡软化点的趋势。     

Molecular mechanics modelling of interfacial energy and flexibility on cellulose

Molecular mechanics modelling is used to calculate the energies of interaction, hence the molecular level energy of adhesion at the interface with crystalline cellulose I of three different photopolymerizable primers and of a polyester varnish at the interface with the primer/cellulose assembly. The energy of interactions for just one of the primers with the statistically most common conformation of amorphous cellulose has also been obtained for comparison. Experimental results of adhesion by a standard peel test and by thermomechanical analysis, in which the effect of viscoelastic energy dissipation by crack tip propagation has been respectively minimized or is not present, hence in which the energy of interfacial interaction is nothing else but the work of adhesion, correlated well with the energies of interaction calculated by molecular mechanics. An equation correlating the energy of interaction at each finish/cellulose interface with the deflection derived by thermomechanical analysis, and with the number of internal bond rotational degrees of freedom as well as the degree of networking of the finish, has been derived and is presented. A relationship between the intrinsic fracture energy Go and the molecular mechanics-derived energy of interaction at the interface equating this to the square of the work of adhesion is obtained and is presented.     

Functional properties of proteins in foods

The measurement of functionality of protein food ingredients has developed somewhat haphazardly, probably due to the wide range of proteins used as ingredients and the diversity of foods. Studies of the physiochemical properties of proteins should enable prediction of a proteins response to process environments and prove more fruitful than many of the empirical measurements of functionality. The effects of pH, salt type and concentration on the phase behaviour of the oilseed globulin and arachin, demonstrates the complexity of protein solubility and the inadequacies of simple tests that have arisen. Studies of the effects of salts and conditioning on meat fibres, coupled with measurement of the location of water in pellets from water holding tests enable the latter to be applied with increased confidence. Comparison of the endothermic transitions observed on heating with the development of storage and loss moduli allow the contributions of domains of skeletal muscle myosin to gel structure to be investigated.     

Aggregation pheromone system of adult gregarious desert locust schistocerca gregaria (forskal)

Six electrophysiologically active aromatic compounds, viz., anisole, benzaldehyde, veratrole, guaiacol, phenylacetonitrile, and phenol, were identified in the volatiles of older-adult male desert locust. Young adults and females of all age groups produced none or only trace quantities of these compounds. Comparison of the aggregation responses of young and older adults to the crude, older-adult, volatile extract and different synthetic blends of the six compounds showed that the aggregation pheromone system of the adult gregarious locust consists of phenylacetonitrile, guaiacol, phenol, and benzaldehyde. Like the crude volatile extract of older males, neither the synthetic blend of the six compounds nor the adult pheromone blend evoked any significant aggregation responses from nymphs. These results confirm our previous report of sexual differentiation in the production of adult aggregation pheromone in the desert locust and of the evidence of two distinct aggregation pheromone systems in the two stages of the insect.     

硼酸钙对铜渣中夹杂铜沉降效果的影响

考察了添加剂CaB2O3对转炉铜渣中夹杂铜沉降效果的影响，并结合铜渣的粘度测试及红外光谱表征，研究其影响机理，采用FactSage软件计算了添加剂对铜渣液相线温度的影响。结果表明，随添加剂含量增大，铜渣中夹杂铜的沉降效果逐渐增强，添加剂含量由0增至6wt%时，底部渣含铜量由4.10wt%增至6.85wt%，这是由于添加剂可有效降低铜渣粘度。随添加剂含量增大，渣粘度降低，但降低效果随温度增大而趋于平缓。随添加剂含量增大，铜渣的硅酸盐结构趋于简化，添加剂通过破坏铜渣复杂的硅酸盐结构降低铜渣粘度。铜渣的液相线温度随添加剂含量增大而减小，添加剂通过减少渣中固体颗粒的方式降低铜渣粘度。     

水平及竖直基底上微小固着液滴的蒸发特性分析

为揭示非水平表面上微小蒸发液滴的传热传质特性,本文在准稳态模型的假设下构造三维液滴模型,综合考虑了蒸气扩散、蒸发冷却以及气相域中的自然对流这3种传输机理,对水平以及竖直基底上液滴的蒸发过程进行数值研究。通过分析气液界面上温度分布、蒸发通量分布及总蒸发率的变化,重点探究了基底过热度以及重力的改变对液滴蒸发特性的影响。结果表明：与水平基底上温度的对称分布不同,竖直基底上气液界面温度分布表现出明显的非对称性,且非对称性随基底过热度的升高而增强,最低温度点不再位于液滴顶点,而向一侧偏移。此外,水平基底上气液界面局部蒸发通量呈对称分布,各截面分布相似,而竖直基底上局部蒸发通量分布则呈现出显著的非对称性以及各截面异性,非对称性随着基底过热度的升高而增强,这是重力改变后气相域自然对流发生改变的结果。与水平基底相比,竖直基底上蒸发率更高,总蒸发时间更少。最后,基底由水平变为竖直时,液滴内部流场由对称双涡转变为非对称单涡,单涡流速显著大于双涡流速,液滴内流速随基底过热度的上升而增大,单涡环流造成了气液界面温度分布的改变以及最低温度点的偏移。     

二氧化钛改性α-氧化铝载体对银催化剂催化乙烯环氧化反应性能的影响

为了排除载体孔结构变化对催化性能的影响,研究了二氧化钛改性α-氧化铝载体对银催化剂催化乙烯环氧化反应性能的影响。研究结果表明,二氧化钛表面改性α-氧化铝载体对载体的比表面积、孔结构无明显影响;载体表面改性导致催化活性组分银在载体表面均匀分散,分散状况明显改善;经二氧化钛改性后载体表面与银的相互作用增强;对单负载银催化剂,由改性载体制备的银催化剂的活性和选择性均下降,改性对催化性能明显不利;对于共浸渍法制备的多组分银催化剂,低温焙烧对催化性能不利,而由经1000℃高温焙烧的二氧化钛改性载体制备的银催化剂的催化活性明显提高。研究表明,载体表面等电点降低及其与银的强相互作用是造成催化剂上金属银良好分散的主要原因;此外,银催化剂助剂的存在减弱了二氧化钛改性载体与银之间的强相互作用、抑制了环氧乙烷（EO）深度反应的活性,两者协同作用提升了多组分银催化剂的催化反应性能。     

液相沉淀反应在管式微通道反应器中的流动行为研究

以碳酸钙水相合成为模型反应,借助对流动反应过程的放大观测,从沉淀悬浮液的流变特性分析了液相沉淀反应在毫米级管式微通道中的流动行为特征以及通道堵塞的过程机理。结果表明,碳酸钙-水悬浮体系的黏度在低剪切速率下随固含率的增加而飙升,而反应通道堵塞的本质可归因于在壁面和流动主体区形成了固含率较高的局部高黏区,使流动性严重恶化。提高反应的流速加快了壁面沉积层和沉淀颗粒团聚体的形成,反而加快了堵塞;其中团聚体的形成远快于沉积层的积累,使团聚体的“架桥”虽晚于沉积层出现,却成为管路堵塞的主要因素。基于破坏流动壁面和主体的局部高黏区,设计了两种新型的微通道反应器模型,有可能为解决反应通道堵塞这一难题提供新的思路。     

注流孔结构对中间包流场影响的物理模拟

针对某钢厂十流中间包紊流抑制器注流孔结构不合理引起流场分布差、各流铸坯质量不均的问题,运用相似原理,使用相似比为1:3的物理模型进行水模型实验,设计不同的注流孔结构研究流体在中间包的平均停留时间曲线及流场显示特征,明晰注流孔结构对中间包流场的影响规律,优化紊流抑制器注流孔结构,达到中间包流场优化及浸入式水口各流一致性提高的目标。结果表明,长距离多流中间包在无堰坝结构条件下,紊流抑制器的注流孔内径尺寸、数量及开孔方向对中间包流场都有影响,注流孔内径的影响最为显著,数量次之。设计的最佳注流孔内径由原型的53 mm缩小至30 mm,死区比例由54.05%降至34.69%,F曲线最大标准差由0.0154降低至0.0035,中间包流场得到改善,各流一致性显著提高。当注流孔数量由1个增加至3个,死区比例由34.69%增大至46.05%,F曲线最大标准差由0.0035增大到0.0062,注流孔数目越多,流场死区比例反而越大,各水口流场的一致性越差。对长距离多流中间包,建议主要通过适当改变注流孔内径及减少孔数来改善中间包流场,提高各流一致性。     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.