基于MATLAB与WiinCC的仿人智能积分液位控制系统

WinCC是目前较为流行的工业组态软件,组态便捷但难以编程实现复杂控制算法;MATLAB科学工程计算软件包进行复杂运算的效率很高可以很容易地实现复杂控制算法。采用OPC技术设计TMATLAB和WinCC的通信程序,发挥MATLAB科学计算特长和WinCC人机交互优点。该方法具有编程效率高,实现方便,通用性强等特点。     

基于DDE技术的MATLAB与WinCC通信设计

Windows操作系统下的工控组态软件已经被越来越广泛地应用。WinCC作为目前较为流行的组态软件，具有实用性强、组态灵活等优点，但它的数据处理能力较弱。而MATLAB科学工程计算软件包进行复杂运算的效率很高，可以很容易地实现复杂控制算法。为了将MATLAB的科学计算功能和组态软件winCC的人机交互功能相结合，发挥各自优势，提出了一种MATLAB和组态软件WinCC之间的通信方法。采用DDE技术来实现二者之间的数据交换。该方法具有编程效率高，实现方便．通用性强等特点。     

基于OPC和MATLAB的锅炉汽包水位智能控制系统

从WinCC组态软件和OPC技术为突破口,结合MATLAB强大的工程计算能力和西门子组态软件WinCC实时采集数据的特点,在OPC技术基础上实现MATLAB与WinCC的通讯集成,解决了不同监控系统间实时数据交换难题;仿真结果表明,作为客户端MATLAB与服务器端WinCC之间的通信接口,OPC较好地实现了锅炉汽包水位模糊自适应PID智能控制算法的无缝传输和实验测试,较好地满足了锅炉过程控制领域对数据实时、高效的要求.     

基于OPC技术的MATLAB与组态王通信模块设计

组态王是目前较为流行的工业组态软件,组态便捷但难以编程实现复杂控制算法;而MATLAB科学工程计算软件包进行复杂运算的效率很高可以很容易地实现复杂控制算法。采用OPC技术设计了MATLAB和组态王的通信程序,发挥MATLAB科学计算特长和组态王人机交互优点。     

Design and Application of Neural Network Based on LabVlEW and MATLAB

针对神经网络应用问题提出了通过LabVIEW调用MATLAB应用程序实现神经网络的方法.该方法通过LabVIEW与MATLAB的混介编程,能充分发挥了两者的优势,具有更大的灵活性和实用性.同时它使得复杂的控制算法应用于虚拟仪器实现故障诊断成为可能,为快速开发功能强大的智能化虚拟仪器探索了一条的新途径.     

基于DDE技术的监控软件及其实现

提出了一种编写MATLAB的S函数的方法来实现组态软件与MATLAB的DDE通信。该方法由组态软件生成复杂友好的交互式人机界面(HMI)，MATLAB完成复杂控制算法的运算。具有编程效率高、通用性强、实现方便等特点。     

基于OPC的组态软件和MATLAB的通信实现

MCGS作为优秀的国产组态软件,具有实用性强、组态灵活等优点,但它的数据处理能力较弱.MATLAB被广泛应用于科学计算、数学建模与仿真上,始终未能应用于实际的控制系统中.如果使用MATLAB实现复杂的控制算法,再结合工控组态软件作为系统的主控,在实际的工程项目中必将达到非常理想的控制效果.本文以OPC技术为例,实现了MATLAB和组态软件MCGS的数据通信.该方法具有编程简单、实现方便等特点.     

COM组件在基于VB与MATLAB的控制器接口程序中的应用

本文采用MATLAB语言编程实现增量式PID(Proportion-Integral-Differential,比例-积分-微分)控制算法,采用VB程序进行人机界面的设计;运用COM技术实现VB与MATLAB之间的数据交换,将PID整定参数和被控对象参数通过COM接口传递到MATLAB,由MATLAB完成控制算法的计算,将计算结果返回至VB,由VB完成曲线的显示.     

基于LabVIEW与MATLAB平台的神经网络设计与应用研究

针对神经网络应用问题提出了通过LabVIEW调用MATLAB应用程序实现神经网络的方法。该方法通过LabVIEW与MATLAB的混合编程,能充分发挥了两者的优势,具有更大的灵活性和实用性。同时它使得复杂的控制算法应用于虚拟仪器实现故障诊断成为可能,为快速开发功能强大的智能化虚拟仪器探索了一条的新途径。     

MATLAB与WinCC的动态数据交换技术

介绍了通过DDE技术实现MATLAB与WinCC的数据通信,可充分发挥WinCC的可视化界面与MATLAB强大的数值计算功能的各自优势.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。