Determination of selected mycotoxins in mould cheeses with liquid chromatography coupled to tandem with mass spectrometry

A simple and feasible method is described for analysing nine mycotoxins in cheese matrix. The method involves liquid extraction followed by high performance liquid chromatographic separation and mass spectrometric detection of the analytes, and allows the determination of aflatoxins B1, B2, G1, G2 and M1, ochratoxin A, mycophenolic acid, penicillic acid and roquefortine C simultaneously. Average recoveries of the mycotoxins from spiked samples at concentration levels of 5-200 µg kg^-1 ranged from 96-143%. Within-day relative standard deviations at these concentration levels varied from 2.3-12.1%. The limit of quantification for aflatoxin M1 was 0.6 µg kg^-1 and for the other compounds 5 µg kg^-1. The method developed was applied for analysing these mycotoxins in blue and white mould cheeses purchased from Finnish supermarkets. Roquefortine C was detected in all of the blue mould cheese samples in concentrations of 0.8-12 mg kg^-1. One blue cheese contained also 0.3 mg kg^-1 mycophenolic acid. The other investigated mycotoxins were absent in the samples.     

Comparison of various assays used for detection of beta-lactam antibiotics in poultry meat

In this study, microbiological tests for the detection of beta-lactam antibiotics in meat and meat products were evaluated. The traditional FPT (four plate test, containing Bacillus subtilis and Kocuria rhizophila), BsDA (Bacillus stearothermophilus disc assay) and a newly developed microbiological test, Premi®Test (containing Bacillus stearothermophilus) were included in the study. The limit of detection (LOD) of the Premi®Test was compared with the LOD of the traditional methods. The detection limits of the tests were determined by using beta-lactam antibiotic standards dissolved in meat juice, as well as meat tissue obtained from laying hens after experimental administration of amoxicillin. Positive samples, based on inhibition of growth of the organism in the test, were confirmed by high performance liquid chromatography (HPLC). Growth inhibition in the traditional tests is visible as a clear zone on the plate, whereas for Premi®Test, this is based on the absence of a colour change of the test. The LODs of antibiotics tested were as follows: Penicillin G (PENG) 5 µg kg^-1, amoxicillin (AMOX) 10 µg kg^-1, ampicillin (AMP) 25 µg kg^-1, oxacillin (OXA) 30 µg kg^-1, and cloxacillin (CLOX) 30 µg kg^-1 on the plate with Bacillus stearothermophilus. Beta-lactam antibiotics can be detected also on one plate seeded with Kocuria rhizophila, although the LODs are higher: PENG 10 µg kg^-1, AMOX 25 µg kg^-1, AMP 30 µg kg^-1, OXA 50 µg kg^-1, and CLOX 50 µg kg^-1. Premi®Test was performed according to the Standard Operating Procedure intended for detection of beta-lactam antibiotics in poultry tissues with following LODs: PENG 4 µg kg^-1, AMOX 5 µg kg^-1, AMP 5 µg kg^-1, OXA 40 µg kg^-1, CLOX 50 µg kg^-1. All tests are able to detect beta-lactam antibiotics such as penicillin G, ampicillin, amoxicillin, oxacillin and cloxacillin below the maximum residue level (MRL). However, the detection limits of the Premi®Test for PENG, AMOX and AMP were below the limits of BsDA and the plate containing Kocuria rhizophila.     

Evaluation of large volume-difficult matrix introduction-gas chromatography-time of flight-mass spectrometry (LV-DMI-GC-TOF-MS) for the determination of pesticides in fruit-based baby foods

The European Union Baby Food Directive (1999/39/EC), which came into force on 1 July 2002, set legal maximum residue levels at 0.01 mg kg^-1 for all pesticides in baby foods. The combination of large volume-difficult matrix introduction (LV-DMI) with gas chromatography-time of flight-mass spectrometry (GC-TOF-MS), described herein, provides the analyst with a simple but rapid alternative GC-MS technique for the multiresidue analysis of pesticides in fruit-based baby foods. Samples were extracted with ethyl acetate in the presence of Na₂SO₄ and NaHCO₃ and the crude extracts were analysed directly using LV-DMI-GC-TOF-MS. The best overall results (98 pesticides quantified satisfactorily at a spiking level of 0.01 mg kg^-1) were obtained by analysis of concentrated extracts (2.5 g crop ml^-1) using a 30-m column, with a chromatographic run time of 25 min. A good signal-to-noise ratio was obtained at the lowest calibrated level (0.0125 μg ml^-1), with excellent linearity achieved over the range 0.0125-0.25 μg ml^-1 (equivalent to 0.005-0.1 mg kg^-1). Average recoveries for the analysis of five replicate determinations at a spiking level of 0.01 mg kg^-1 were between 79 and 114% with relative standard derivations generally less than 20%.     

Migration of aniline from polyamide cooking utensils into food simulants

Migration of aniline from polyamide cooking utensils was investigated. Aniline was found to originate from the application of black colorant in the polyamide 66 raw material. Analysis of polyamide raw material revealed an aniline concentration of 121 ± 13 mg kg^-1. The aniline concentration in a cooking utensil (turner) manufactured with 70% polyamide raw material was 82 ± 6 mg kg^-1. When testing migration from black coloured samples of turner, whisk and cooking spoon into water simulant at 100°C for 30 min, the migration levels at the third exposure were 39 ± 1, 11 ± 4 and 37 ± 4 μg dm^-2, respectively. Hence, these articles were not compliant with respect to the area-based limit for primary aromatic amines (3.33 μg dm^-2) set by European Union Directive 2002/72/EC. Repeated testing of a cooking utensil (turner) showed that approximately 100 h use at 100°C was required to reach legal (non-detectable) levels of aromatic amine migration.     

Five-year survey of ochratoxin A in processed sultanas from Turkey

The results of surveillance for ochratoxin A (OTA) in 1885 samples of sultanas taken during five crop years between 1999 and 2003 are reported. The analytical method was based on extraction with methanol + sodium bicarbonate and clean-up by immunoaffinity column chromatography followed by high-performance liquid chromatography with fluorescence detection. The limit of detection for OTA was 0.3 µg kg^-1. The results show that 9.3% of the samples contained no detectable levels of OTA, whereas 0.6% had concentrations exceeding 10 µg kg^-1; the remaining 90.3% had levels within the range 0.3-10 µg kg^-1. The overall mean OTA concentration in the total number of 1885 samples taken was 1.36 ± 2.91 µg kg^-1; the overall median was calculated as 0.90 µg kg^-1.     

Lead and cadmium in meat and meat products consumed by the population in Tenerife Island, Spain

The aim of this study was to determine the levels of lead and cadmium in chicken, pork, beef, lamb and turkey samples (both meat and meat products), collected in the island of Tenerife (Spain). Lead and cadmium were measured by graphite furnace atomic absorption spectrometry (GFAAS). Mean concentrations of lead and cadmium were 6.94 and 1.68 µg kg^-1 in chicken meat, 5.00 and 5.49 µg kg^-1 in pork meat, 1.91 and 1.90 µg kg^-1 in beef meat and 1.35 and 1.22 µg kg^-1 in lamb meat samples, respectively. Lead was below the detection limit in turkey samples and mean cadmium concentration was 5.49 µg kg^-1. Mean concentrations of lead and cadmium in chicken meat product samples were 3.16 and 4.15 µg kg^-1, 4.89 and 6.50 µg kg^-1 in pork meat product, 6.72 and 4.76 µg kg^-1 in beef meat product and 9.12 and 5.98 µg kg^-1 in turkey meat product samples, respectively. The percentage contribution of the two considered metals to provisional tolerable weekly intake (PTWI) was calculated for meat and meat products. Statistically significant differences were found for lead content in meats between the chicken and pork groups and the turkey and beef groups, whereas for cadmium concentrations in meats, significant differences were observed between the turkey and chicken, beef and lamb groups. In meat products, no clear differences were observed for lead and cadmium between the various groups.     

Survey of formaldehyde, acetaldehyde and oligomers in polyethylene terephthalate food-packaging materials

Polyethylene terephthalate (PET) is frequently used as a packaging material for beverage bottles, fruit and vegetable trays, and egg crates in Japan. Levels of formaldehyde (FA), acetaldehyde (AA) and PET oligomers in various PET food packaging were determined. PET samples were initially dissolved in trifluoroacetic acid with 2,4-dinitrophenylhydrazine to derivatize formaldehyde and acetaldehyde to their dinitrophenylhydrazones. The stable derivatives along with the oligomers were analysed using HPLC with ultraviolet light detection at 360 and 254 nm, respectively. The PET pellets contained 3.5-12.4 µg g^-1 AA and 4.0-7.2 mg g^-1 oligomers, while FA was below the determination limit. FA, AA and oligomer levels in Japanese bottles were 0.6-3.0 µg g^-1, 8.4-25.7 µg g^-1 and 5.0-8.7 mg g^-1, ND-1.6 µg g^-1, 5.0-13.1 µg g^-1 and 4.9-8.2 mg g^-1 in French and Italian bottles, and ND-1.2 µg g^-1, 9.1-18.7 µg g^-1 and 5.6-8.0 mg g^-1 in US and Canadian bottles, respectively. Compared with European bottles, Japanese bottles contain higher FA and AA levels. In sheet-moulding products, their contents were determined as ND-1.1 µg g^-1, 11.5-43.1 µg g^-1 and 4.6-9.2 mg g^-1, respectively. The results show that sheet-moulding products contain lower FA and higher AA in comparison with bottles. FA and AA are considered to be generated from PET during the heating process for moulding the pellets to bottles or sheet-moulding articles and de-aeration during the sheet-moulding process is effective in removing FA. In contrast, the level of the oligomers remains unchanged during the moulding process from pellets to bottles or sheet products.     

Acrylamide in Asian foods in Hong Kong

About 400 food samples, mainly Asian foods available in Hong Kong, were tested for acrylamide by an LC-MS/MS method using [1, 2, 3-¹³C₃]-acrylamide as surrogate. The acrylamide levels in the more commonly consumed food items in the food groups such as rice and rice products, noodles, bakery and batter-based products, were generally less than 60 μg kg^-1. Higher levels were found in the food groups such as biscuit-related products and crisps. The highest levels were detected in potato crisps (1500-1700 μg kg^-1). Lower levels were found in rye flour-based crisps (440 μg kg^-1), followed by corn-based (65 to 230 μg kg^-1) and wheat flour-based crisps (61-200 μg kg^-1), and then rice flour-based crisps (15-42 μg kg^-1). The acrylamide formation during deep frying of a wheat flour-based product, Chinese fried fritter, was studied. Deep-frying at 170°C resulted in gentle but steady rise in acrylamide content. A steep rise for frying at 210°C was recorded. The moisture content of the product decreased with frying time, but the fat content increased. It is proposed that the reaction for the formation of acrylamide was initiated on the surface and then penetrated into the interior of the food matrix by heat transfer via radiation/conduction and diffusion of hot oil.     

Aflatoxin and ochratoxin A content of spices in Hungary

In October and November 2004, 91 spice samples (70 ground red pepper, six black pepper, five white pepper, five spice mix and five chilli samples), the majority of which originated from commercial outlets, were analysed for aflatoxins B₁, B₂, G₁ and G₂ (AFB1, AFB2, AFG1, AFG2) and ochratoxin A (OTA) content by high-performance liquid chromatography (HPLC) after immunoaffinity column clean-up. Eighteen of the 70 ground red pepper samples contained AFB1, seven of them in a concentration exceeding the 'maximum level' of 5 µg kg^-1 (range 6.1-15.7 µg kg^-1). Of the other spices assayed, the AFB1 contamination of one chilli sample exceeded 5 µg kg^-1 (8.1 µg kg^-1). Thirty-two of the 70 ground red pepper samples contained OTA, eight of them in a concentration exceeding the 10 µg kg^-1 'maximum level' (range 10.6-66.2 µg kg^-1). One chilli sample was contaminated with OTA at 2.1 µg kg^-1. The AFB1 and OTA contamination of ground red pepper exceeding the 'maximum level' (5 and 10 µg kg^-1, respectively) was obviously the consequence of mixing imported ground red pepper batches heavily contaminated with AFB1 and OTA with red pepper produced in Hungary. This case calls attention to the importance of consistently screening imported batches of ground red pepper for aflatoxin and ochratoxin A content and strictly prohibiting the use of batches containing mycotoxin concentrations exceeding the maximum permitted level.     

Determination of triazamate in apples, peas and Brussels sprouts using high-performance liquid chromatography with tandem mass spectrometry

A rapid method was developed to allow the analysis of triazamate and the hydrolysis product triazamate acid in apples, peas and Brussels sprouts. The procedure was based on acidified methanol extraction with quantification by liquid chromatography coupled with tandem mass spectrometry detection. The detection limit, based on the lowest calibration level, was 0.005 mg kg^-1. The method was validated at 0.05 and 0.01 mg kg^-1, and was used for screening of triazamate acid in the surveillance of apples as part of the UK pesticide monitoring programme. Calibrations were linear over the range 0.004-0.080 µg ml^-1 (equivalent to 0.005-0.11 mg kg^-1), with a minimum correlation coefficient of 0.95. The detection response showed some matrix-dependent variation. Mean recoveries were in the range 70-108% with associated per cent coefficient of variations of less than 20%.     

Methylmercury determination in fish and seafood products and estimated daily intake for the Spanish population

The mercury content of 25 samples of fish and seafood products most frequently consumed in Spain was determined. A simple method comprising cold vapour and atomic absorption spectrometry was used to determine separately inorganic and organic mercury. In all samples inorganic mercury content was below 50 µg kg^-1. There was wide variability, among not only the mercury levels of different fish species, but also for different samples of the same species — with the methylmercury content ranging from below 54 to 662 µg kg^-1. The highest mean methylmercury content was found in fresh tuna. Based on an average total fish consumption of 363 g/person week^-1, the methylmercury intake was estimated to be 46.2 µg/person week^-1. Therefore, the mercury intake of Spanish people with a body weight ≤ 60 kg is lower than the Joint FAO/WHO Expert Committee on Food Additives (JECFA) provisional tolerable weekly intake (PTWI) of 1.6 µg kg^-1 body weight, but exceeds the US National Research Council (NRC) limit of 0.7 µg kg^-1 body weight week^-1 based on a benchmark dose.     

The occurrence of nitrofuran metabolites in the tissues of chickens exposed to very low dietary concentrations of the nitrofurans

The global problem of food products contaminated by residues of the banned carcinogenic nitrofuran drugs has prompted research into how such residues accumulate in tissues. In the study described here, two aspects have been investigated where the nitrofurans accumulate in tissues from chickens exposed to either a dietary or an environmental source of contamination. Twenty groups of broilers were fed a diet containing one of the nitrofurans: furazolidone, nitrofurazone, nitrofurantoin or furaltadone at concentrations of 30, 100, 300, 1000 and 3000 µg kg^-1. At the lowest concentration of furazolidone contamination (0.01% of the therapeutic dose) tissue bound AOZ metabolite residues were detected in liver (1.1 ± 0.2 µg kg^-1) and in muscle (0.33 ± 0.03 µg kg^-1). Similar results were obtained for AMOZ (0.6 ± 0.2 µg kg^-1 in liver), the tissue bound metabolite of furaltadone. There was no appreciable accumulation of nitrofurantoin in chicken muscle. The AHD metabolite was not detected in muscle from birds fed nitrofurantoin at either 30 or 100 µg kg^-1. For nitrofurazone the concentrations of the SEM metabolite were higher in muscle than in liver for all dietary concentrations. The potential for a contaminated environment to cause nitrofuran residues in chickens was investigated. Six chickens were placed in a pen that was previously occupied by birds fed a diet containing 3000 µg kg^-1 of furazolidone. After 24 hours' exposure of the chickens to the litter in the pen, AOZ residues of 0.13 ± 0.04 and 0.10 ± 0.03 µg kg^-1 were detected in liver and muscle, respectively. The results of both experiments have implications for the poultry industry in trying to eliminate nitrofurans from their production systems, and for regulatory analysts faced with the detection of low concentrations of the drugs, both in tissues and in feedingstuffs.     

Consumers' ability to discriminate aflatoxin-contaminated Brazil nuts

The objectives of the study were to investigate the extent to which consumers can separate nuts with a high content of aflatoxin from sound nuts, and whether sorting results can be improved by information or whether they are affected by certain factors. A test panel consisting of 100 subjects was asked to crack 300 g Brazil nuts and to sort the nuts into those they considered edible and inedible. The test showed that consumers can, on current behaviour, discriminate aflatoxin-contaminated Brazil nuts to a significant extent. The median and the 95th percentile of the total concentrations of aflatoxins (B₁, B₂, G₁, G₂) in the samples before sorting were 1.4 and 557 µg kg^-1, respectively, and in the edible fractions after sorting 0.4 and 56 µg kg^-1, respectively. Given that levels of aflatoxins before sorting exceed either 2 µg aflatoxin B₁ kg^-1 or totally 4 µg aflatoxins kg^-1, there was no effect of aflatoxin concentrations before sorting on the probability of exceeding these thresholds in the edible fraction. This means that similar sorting results were obtained for samples with aflatoxin levels exceeding either of the two thresholds, irrespective of if the thresholds were exceeded with a few µg kg^-1 or up to more than 1000 µg kg^-1. None of the tested factors (such as sex, age, level of education, ethnic background or knowledge of mycotoxins) had any effects on the probability of exceeding either of the two aflatoxin thresholds.     

Australian survey of acrylamide in carbohydrate-based foods

A method was developed and validated for the determination of acrylamide in carbohydrate-based foods. Solid-phase extraction employing a mixed-bed anion and cation exchange cartridge in series with a C18 extraction disk was used to clean-up water extracts of food samples before analysis by liquid chromatography coupled with tandem mass spectrometry detection. The limit of detection was calculated as approximately 25 μg kg^-1 and the limit of reporting was 50 μg kg^-1. The average method recovery for 84 samples from a range of matrices reporting was 99% with a relative standard deviation of 11.2%. A survey was conducted of 112 samples of carbohydrate-based foods composited from 547 products available in the Australian market. The analytical results were used in conjunction with Australian food consumption data derived from the 1995 National Nutrition Survey (NNS) to prepare preliminary dietary exposure estimates of Australians to acrylamide through only the food groups examined. Mean dietary exposure to acrylamide resulting from consumption of the foods tested, for Australians aged 2 years and above, was estimated as 22-29 µg day^-1 (equivalent to 0.4-0.5 µg kg^-1 bodyweight day^-1) and between 73 and 80 µg day^-1 (1.4 and 1.5 µg kg^-1 bodyweight day^-1) for 95th percentile consumers. Young children (2-6 years) consuming acrylamide-containing foods had a higher acrylamide exposure on a per kilogram bodyweight basis (mean 1.0-1.3 µg kg^-1 bodyweight day^-1). The estimated exposure of Australians to acrylamide is similar to that estimated for other countries.     

Annual variation of deoxynivalenol in Danish wheat flour 1998-2003 and estimated daily intake by the Danish population

The occurrence of deoxynivalenol (DON) in Danish wheat flour was studied during the period 1998-2003 by either capillary gas chromatography with electron capture detection and liquid chromatography coupled to an ion trap mass spectrophotometer. A total of 151 samples were collected from mills and the retail market in Denmark. Contamination levels varied considerably from year-to-year with the highest concentrations occurring in samples from the 2002 harvest with mean and median concentrations of 255 and 300 µg kg^-1, respectively. Compared to other harvest years, 2002 had the highest amount of precipitation around flowering time, i.e. from the end of June to the beginning of July covering weeks 25-27. The lowest average levels were found in samples from the 2001 harvest, where weeks 25-27 were dry compared with other harvest years. The highest value (705 µg kg^-1) was obtained in a flour sample from the 2002 harvest, but none of the tested samples exceeded the maximum limit of 750 µg kg^-1, which has been recently introduced by the European Commission for DON in flour used as raw materials in food products. Calculation of chronic or usual intake by a deterministic approach showed that intake did not exceed the TDI of 1 µg kg^-1 bw day^-1 either for the whole population or for children. A probabilistic approach also showed that intake in general was below the TDI, but intake for children in the 99% percentile amounted to more than 75% of the TDI. The highest intake is calculated to be 2.5 µg kg^-1 bw day^-1.     

Cadmium and mercury in cephalopod molluscs: Estimated weekly intake

Cadmium and mercury concentrations were measured in the flesh and hepatopancreas of different species of cephalopod molluscs (European squid, common octopus, curled octopus, horned octopus, pink cuttlefish, common cuttlefish) in order to establish whether the concentrations exceeded the maximum levels fixed by the European Commission. In hepatopancreas, the levels of cadmium were substantially higher than those in flesh (flesh 0.11-0.87 µg g^-1 wet weight, hepatopancreas 2.16-9.39 µg g^-1 wet weight), whilst the levels of mercury (flesh 0.13-0.55 µg g^-1 wet weight, hepatopancreas 0.23-0.79 µg g^-1) were approximately double those in flesh. Concentrations exceeding the maximum permitted limit of cadmium were found in 39.8 and 41.0% of common octopus and pink cuttlefish flesh, respectively. For mercury, concentrations above the limit were found only in octopuses, and precisely in 36.8, 50.0 and 20.0% of flesh samples of common, curled and horned octopus, respectively. In the hepatopancreas, concentrations of cadmium and mercury were above the proposed limits in all the samples examined. The estimated weekly intake of between 0.09 and 0.49 µg kg^-1 body weight for cadmium and between 0.05 and 0.24 µg kg^-1 body weight for mercury made only a small contribution to the provisional tolerable weekly intake (cadmium 1.3-7.0%, mercury 1.0-4.8%) set by the WHO.     

Migration of trimellitic acid from epoxy anhydride can coatings into foods

The migration of trimellitic acid and its esters from epoxy anhydride coatings was determined in simulants as well as in canned foods. The most appropriate simulant was a combination of EC simulants B and C: 2% acetic acid/10% ethanol in water. The average migration into food was 900 μg kg^-1. This far exceeds the 50 μg kg^-1 for which the safety of trimellitic acid and its anhydride is ensured and the Swiss legal limit (QM(T) of 5 mg kg^-1 coating). Furthermore, much trimellitic acid migrated as (unidentified) esters, i.e. toxicological testing of free trimellitic acid is inadequate for the material that in reality migrates.     

Migration of volatile degradation products into ozonated water from plastic packaging materials

Migration of volatile degradation products from poly(ethylene terephthalate) (PET) and high-density polyethylene (HDPE) bottles, polypropylene (PP) caps and ethyl vinyl acetate (EVA) liners into ozonated water was measured. Polymer strips were immersed in deionized and distilled water with ozone concentrations of 0.5, 2.5 and/or 5 mg kg^-1 inside 35-ml vials, which were clamp-sealed and stored at 40°C for 10 days. A purge-and-trap unit was developed to extract volatile products from the ozonated water in vials. The extractables were trapped in an adsorbent tube and analysed using a GC-MS coupled with an automated thermal desorber (ATD). Mass spectra were interpreted by comparison with a NIST mass spectral library, and an internal standard method was used to quantify the extractables of interest. Several volatile compounds found in ozonated water that had been in contact with PP, EVA and HDPE polymers included butanal, pentanal, hexanal, heptanal, octanal, nonanal, 2,2-dimethyl propanal, 3-hexanone, 2-hexanone and heptanone. These compounds could cause off-taste and off-odour with a low organoleptic threshold. In general, the concentrations of these volatile compounds increased with an increased exposure to ozone. The highest concentration found was 14.1 ± 0.6 μg kg^-1 for hexanal with a 5 mg kg^-1 ozone treatment of PP caps. Even at a treatment level of 5 mg kg^-1 ozone, which is greater than 10 times the current regulatory limits for bottled water, the extractables migrating from those polymers were within the levels permitted by the FDA. For the PET sample, no significant peaks were observed before or after ozonation. These results imply that PP caps containing EVA liners may be major sources of off-odour and taste in ozonated bottled water.     

Consumer exposure to substances in plastic packaging. I. Assessment of the contribution of styrene from yogurt pots

A generic methodology for the assessment of consumer exposure to substances migrating from packaging materials into foodstuffs during storage is presented. Consumer exposure at the level of individual households is derived from the probabilistic modeling of the contamination of all packed food product units (e.g. yogurt pot, milk bottle, etc.) consumed by a given household over 1 year. Exposure of a given population is estimated by gathering the exposure distributions of individual households to suitable weights (conveniently, household sizes). Calculations are made by combining (i) an efficient resolution of migration models and (ii) a methodology utilizing different sources of uncertainty and variability. The full procedure was applied to the assessment of consumer exposure to styrene from yogurt pots based on yearly purchase data of more than 5400 households in France (about 2 million yogurt pots) and an initial concentration c₀ of styrene in yogurt pot walls, which is assumed to be normally distributed with an average value of 500 mg kg^-1 and a standard deviation of 150 mg kg^-1. Results are discussed regarding both sensitivity of the migration model to boundary conditions and household practices. By assuming a partition coefficient of 1 and a Biot number of 100, the estimated median household exposure to styrene ranged between 1 and 35 µg day^-1 person^-1 (5th and 95th percentiles) with a likely value of 12 µg day^-1 person^-1 (50th percentile). It was found that exposure does not vary independently with the average consumption rate and contact times. Thus, falsely assuming a uniform contact time equal to the sell-by-date for all yogurts overestimates significantly the daily exposure (5th and 95th percentiles of 2 and 110 µg day^-1 person^-1, respectively) since high consumers showed quicker turnover of stock.     

Residues of the fungicide famoxadone in grapes and its fate during wine production

Famoxadone is a recently applied fungicide to vines that belongs to the oxazolidinedione family. The fate of famoxadone was studied by considering the decay ratio of this fungicide during the maturation of grapes and wine production. The main factors affecting the presence of fungicide residues such as fruit growth, photodegradation, evaporation, thermodegradation and co-distillation were studied with model systems. An experimental field was treated with a commercial product containing famoxadone at the recommended dose. After this application, residues of famoxadone were found in grapes at 0.27 ± 0.06 mg kg^-1. In this field experiment, the half-life (t_1/2;) of famoxadone, which is described by pseudo-first-order kinetics (R² = 0.74), was 18 ± 6 days, resulting from the photodegradation. The famoxadone residue levels in grapes were below the established maximum residues level for Europe (2 mg kg^-1), whilst levels in wine, carried out with and without maceration, were below the calculated limit of detection of the method.