Transient waves in plates of functionally graded materials

A numerical method is proposed for analysing transient waves in plates of functionally graded material (FGM) excited by impact loads. The material properties of the FGM plate have a gradient in the thickness direction and are anisotropic in the plane of the plate. In the present method, the FGM plate is divided into layer elements in the thickness direction. For an accurate modelling of the variation of the material property of FGM plates, it is expressed by second‐order polynomials in the thickness direction within an element. This can further reduce the number of elements to obtain more accurate results effectively. The principle of virtual work is used to develop approximate dynamic equilibrium equations. The displacement response is determined by employing the Fourier transformation and the modal analysis. As examples, the displacement response of FGM plates excited by line, point and distributed loads is calculated. The computations have shown the efficiency of the present method. Copyright © 2001 John Wiley & Sons, Ltd.     

Thermal buckling analysis of moderately thick functionally graded annular sector plates

In this article, thermal buckling analysis of moderately thick functionally graded annular sector plate is studied. The equilibrium and stability equations are derived using first order shear deformation plate theory. These equations are five highly coupled partial differential equations. By using an analytical method, the coupled stability equations are replaced by four decoupled equations. Solving the decoupled equations and satisfying the boundary conditions, the critical buckling temperature is found analytically. To this end, it is assumed that the annular sector plate is simply supported in radial edges and it has arbitrary boundary conditions along the circular edges. Thermal buckling of functionally graded annular sector plate for two types of thermal loading, uniform temperature rise and gradient through the thickness, are investigated. Finally, the effects of boundary conditions, power law index, plate thickness, annularity and sector angle on the critical buckling temperature of functionally graded annular sector plates are discussed in details.     

功能梯度材料薄球壳热屈曲问题

研究了由金属和陶瓷组成的功能梯度材料薄球壳热屈曲问题。用张量方法推导得到轴对称球壳稳定性方程。将热本构方程应用到球壳稳定性方程中,得到以位移表示的球壳热屈曲方程组。分别考虑均布外压和温度作用,采用伽辽金法计算分析简支球壳的热屈曲问题,给出薄球壳厚度、物性参数变化、内外表面温差变化引起的临界温度变化趋势和临界压力变化趋势。     

Aero-thermoelastic stability of functionally graded plates

In this paper, an analytical investigation intended to determine the aero-thermoelastic stability margins of functionally graded panels is carried out. For this purpose, piston theory aerodynamics has been employed to model quasi-steady aerodynamic loading. The material properties of the plate are assumed to be graded continuously across the panel thickness. A simple power-law and the Mori–Tanaka scheme are used for estimating the effective material properties such as temperature-dependent thermoelastic properties. The effects of compressive in-plane loads and both uniform and through the thickness non-linear temperature distributions are also considered. Hamilton’s principle is used to determine the coupled partial differential equations of motion. Using Galerkin’s method, the derived equations are transformed into a set of coupled ordinary differential equations, and then solved by numerical time integration. Some examples comparing the stability margins of functionally graded panels with those of plates made of pure metals and pure ceramics are presented. It is shown that the use of functionally graded materials can yield an increase or decrease of the aeroelastic stability in the supersonic flow for different regions.     

Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates

Thermal buckling and postbuckling behavior is presented for functionally graded nanocomposite plates reinforced by single-walled carbon nanotubes (SWCNTs) subjected to in-plane temperature variation. The material properties of SWCNTs are assumed to be temperature-dependent and are obtained from molecular dynamics simulations. The material properties of functionally graded carbon nanotube-reinforced composites (FG-CNTRCs) are assumed to be graded in the thickness direction, and are estimated through a micromechanical model. Based on the multi-scale approach, numerical illustrations are carried out for perfect and imperfect, geometrically mid-plane symmetric FG-CNTRC plates and uniformly distributed CNTRC plates under different values of the nanotube volume fractions. The results show that the buckling temperature as well as thermal postbuckling strength of the plate can be increased as a result of a functionally graded reinforcement. It is found that in some cases the CNTRC plate with intermediate nanotube volume fraction does not have intermediate buckling temperature and initial thermal postbuckling strength.     

Thermomechanical bending analysis of functionally graded sandwich plates with both functionally graded face sheets and functionally graded cores

The bending response of functionally graded material (FGM) sandwich plates subjected to thermomechanical loads is investigated using a four-variable refined plate theory. A new type of FGM sandwich plate, namely, both FGM face sheets and an FGM hard core, is considered. Containing only four unknown functions, the governing equations are deduced based on the principle of virtual work and then these equations are solved via the Navier approach. Analytical solutions are obtained to predict the deflections and stresses of simply supported FGM sandwich plates. Benchmark comparisons of the solutions obtained for a degradation model (functionally graded face sheets and homogeneous cores) with ones computed by several other theories are conducted to verify the accuracy and efficiency of the present approach. The influences of volume fraction distribution, geometrical parameters, and thermal load on dimensionless deflections and normal and shear stresses of the FGM sandwich plates are studied.     

Energy trapping of thickness-shear vibration modes of elastic plates with functionally graded materials

Energy trapping has important applications in the design of thickness-shear resonators. Considerable efforts have been made for the effective utilization and improvement of energy trapping with variations of plate configurations, such as adding electrodes and contouring. As a new approach in seeking improved energy trapping feature, we analyze thickness-shear vibrations in an elastic plate with functionally graded material (FGM) of in-plane variation of mechanical properties, such as elastic constants and density. A simple and general equation governing the thickness-shear modes is derived from a variational analysis. A plate with piecewise constant material properties is analyzed as an example. It is shown that such a plate can support thickness-shear vibration modes with obvious energy trapping. Bechmann's number for the existence of only one trapped mode also can be determined accordingly.     

Guided waves in functionally graded viscoelastic plates

In this paper, a dynamic solution for the propagating viscoelastic waves in functionally graded material (FGM) plates subjected to stress-free conditions is presented in the context of the Kelvin–Voigt viscoelastic theory. The FGM plate is composed of two orthotropic materials. The material properties are assumed to vary in the thickness direction according to a known variation law. The three obtained wave equations are divided into two groups, which control viscoelastic Lamb-like wave and viscoelastic SH wave, respectively. They are solved respectively by the Legendre orthogonal polynomial series approach. The validity of the method is confirmed through a comparison with the Lamb wave solution of a pure elastic FGM plate and a comparison with the SH wave solution of a viscoelastic homogeneous plate. The dispersion curves and attenuation curves for the graded and homogeneous viscoelastic plates are calculated to highlight their differences. The viscous effect on dispersion curves is shown. The influences of gradient variations are illustrated.     

Thermal buckling and postbuckling analysis of functionally graded annular plates with temperature-dependent material properties

As a first endeavor, the thermal buckling and postbuckling analysis of functionally graded (FG) annular plates with material properties graded in the radial direction is presented. The formulation is derived based on the first-order shear deformation theory (FSDT) and the geometrical nonlinearity is modeled using Green’s strain in conjunction with von Karman’s assumptions. The material properties are temperature-dependent and graded according to the power law distribution. It is assumed that the temperature varies along the radial direction. Using the virtual work principle, the pre-buckling and postbuckling equilibrium equations and the related boundary conditions are derived. Differential quadrature method (DQM) as an efficient numerical technique is adopted to solve the governing equations. The presented formulation and the method of solution are validated by performing convergence and comparison studies with available results in the literature. Finally, the effects of volume fraction index, geometrical parameters, mechanical/thermal properties of the constituent materials and boundary conditions on the thermal buckling and postbuckling behavior of the radially graded annular plate are evaluated and discussed.     

Thermoelastic bending analysis of functionally graded sandwich plates

The thermoelastic bending analysis of functionally graded ceramic–metal sandwich plates is studied. The governing equations of equilibrium are solved for a functionally graded sandwich plates under the effect of thermal loads. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson’s ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. Field equations for functionally graded sandwich plates whose deformations are governed by either the shear deformation theories or the classical theory are derived. Displacement functions that identically satisfy boundary conditions are used to reduce the governing equations to a set of coupled ordinary differential equations with variable coefficients. The influences played by the transverse normal strain, shear deformation, thermal load, plate aspect ratio, side-to-thickness ratio, and volume fraction distribution are studied. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated.     

Higher-order theory for functionally graded materials

This paper presents the full generalization of the Cartesian coordinate-based higher-order theory for functionally graded materials developed by the authors during the past several years. This theory circumvents the problematic use of the standard micromechanical approach, based on the concept of a representative volume element, commonly employed in the analysis of functionally graded composites by explicitly coupling the local (microstructural) and global (macrostructural) responses. The theoretical framework is based on volumetric averaging of the various field quantities, together with imposition of boundary and interfacial conditions in an average sense between the subvolumes used to characterize the composite's functionally graded microstructure. The generalization outlined herein involves extension of the theoretical framework to enable the analysis of materials characterized by spatially variable microstructures in three directions. Specialization of the generalized theoretical framework to previously published versions of the higher-order theory for materials functionally graded in one and two directions is demonstrated. In the applications part of the paper we summarize the major findings obtained with the one-directional and two-directional versions of the higher-order theory. The results illustrate both the fundamental issues related to the influence of microstructure on microscopic and macroscopic quantities governing the response of composites and the technologically important applications. A major issue addressed herein is the applicability of the classical homogenization schemes in the analysis of functionally graded materials. The technologically important applications illustrate the utility of functionally graded microstructures in tailoring the response of structural components in a variety of applications involving uniform and gradient thermomechanical loading.     

Characterisation methods for functionally graded materials

In this paper the characterisation of functionally graded materials is elucidated by several different methods. These methods described here are used for the quantitative analysis of materials with a local dependence of microstructure parameters. Using X-ray microscopy (computed tomography) for 3D-measurements and optical microscopy on polished sections for 1D and 2D measurements on the same sample, a ceramic filter consisting of sintered spherical particles, various mathematical evaluation methods are described and compared.     

Static solutions for functionally graded simply supported plates

In this article mixed semi-analytical and analytical solutions are presented for a rectangular plate made of functionally graded (FG) material. All edges of a plate are under simply supported (diaphragm) end conditions and general stress boundary conditions can be applied on both top and bottom surface of a plate during solution. A mixed semi-analytical model consists in defining a two-point boundary value problem governed by a set of first-order ordinary differential equations in the plate thickness direction. Analytical solutions based on shear-normal deformation theories are also established to show the accuracy, simplicity and effectiveness of mixed semi-analytical model. The FG material is assumed to be exponential in the thickness direction and Poisson’s ratio is assumed to be constant.     

Thermal stability analysis of circular functionally graded sandwich plates of variable thickness using pseudo-spectral method

In the present study, the thermal stability of laminated functionally graded (FGM) circular plates of variable thickness subjected to uniform temperature rise based on the first-order shear deformation plate theory is presented. Furthermore, two models for FGM plates with variable thickness, corresponding with two manufacturing methods, are proposed. The laminated FGM plate with variable thickness is considered as a sandwich plate constituted of a homogeneous core of variable thickness and two constant thickness FGM face sheets whose material properties are assumed to be graded in the thickness direction according to a simple power law. In order to determine the distribution of the prebuckling thermal load along the radius, the membrane equation is solved using the shooting method. Subsequently, employing the pseudo-spectral method that makes use of Chebyshev polynomials, the stability equations are solved numerically to evaluate the critical temperature rise. The results demonstrate that the thermal stability is significantly influenced by the thickness variation profile, aspect ratio, the volume fraction index, and the core-to-face sheet thickness ratio.     

On disappearing Stoneley waves in functionally graded plates

Dispersion analysis of Lamb waves propagating in anisotropic functionally graded plates with transverse inhomogeneity reveals that the high frequency asymptotes associated with the interfacial Stoneley waves disappear, while in stratified plates the corresponding high frequency asymptotes exist. The analysis utilizes a variant of the Cauchy sextic formalism coupled with the exponential fundamental matrices for constructing explicit dispersion equation.

     

Thermal post-buckling analysis of functionally graded material elliptical plates based on high-order shear deformation theory

Thermal post-buckling analysis is first presented for functionally graded elliptical plates based on high-order shear deformation theory in different thermal environments. Material properties are assumed to be temperature-dependent and graded in the thickness direction. Ritz method is employed to determine the central deflection-temperature curves, the validity of which can be confirmed by comparison with related researchers' results; it is worth noting that the forms of approximate solutions are well chosen in consideration of both simplicity and accuracy. Influences played by different supported boundaries, thermal environmental conditions, ratio of major to minor axis, and volume fraction index are discussed in detail.     

Topology optimization of functionally graded cellular materials

Design of functionally graded material (FGM), in which the mechanical property varies along one direction, is the focus of this study. It is assumed that the microstructure of the FGM is composed of a series of base cells in the variation direction and self-repeated in other directions. Bi-directional evolutionary structural optimization technique in the form of inverse homogenization is used for the design of the FGM for specified variation in bulk or shear modulus. Instead of designing a series of base cells simultaneously, the base cells are optimized progressively by considering three base cells at each stage. Thus, the proper connections between adjacent base cells can be achieved with high computational efficiency. Numerical examples demonstrate the effectiveness of the proposed method for designing microstructures of 2D and 3D FGMs with specified variation in bulk or shear modulus. The proposed algorithm can also be easily extended to design FGMs with other functional properties.     

TiC-Ni梯度功能材料的优化设计

对ＴｉＣ－Ｎｉ梯度功能材料在制备过程中的残余热应力进行了计算机有限元模拟,考察了梯度组成分布指数对热应力大小,最大热应力发生的位置以及纯陶瓷ＴｉＣ侧热应力状态的影响,综合分析了热应力的大小和分布,得到了缓和制备热应力的梯度组成分布指数Ｐ＝１．０的优化设计结果。     

Performance of functionally graded plates under localised transverse loading

This paper presents a study of the bending of an isotropic functionally graded plate under localised transverse load through a combination of analytical and computational means. The analytical modelling is based on the recently developed three-dimensional elasticity solution, expanded to cover different loading types, whilst the Finite Element model uses graded isoparametric elements. The plate under consideration is assumed to be simply supported, with Young’s and shear moduli varying exponentially through the thickness and the Poisson’s ratio constant. Comparative analysis of stress and displacement fields in functionally graded and homogeneous plates subjected to uniformly distributed and patch loadings is carried out.