共查询到20条相似文献,搜索用时 10 毫秒
1.
《工程(英文)》2017,3(5):653-662
Medical models, or “phantoms,” have been widely used for medical training and for doctor-patient interactions. They are increasingly used for surgical planning, medical computational models, algorithm verification and validation, and medical devices development. Such new applications demand high-fidelity, patient-specific, tissue-mimicking medical phantoms that can not only closely emulate the geometric structures of human organs, but also possess the properties and functions of the organ structure. With the rapid advancement of three-dimensional (3D) printing and 3D bioprinting technologies, many researchers have explored the use of these additive manufacturing techniques to fabricate functional medical phantoms for various applications. This paper reviews the applications of these 3D printing and 3D bioprinting technologies for the fabrication of functional medical phantoms and bio-structures. This review specifically discusses the state of the art along with new developments and trends in 3D printed functional medical phantoms (i.e., tissue-mimicking medical phantoms, radiologically relevant medical phantoms, and physiological medical phantoms) and 3D bio-printed structures (i.e., hybrid scaffolding materials, convertible scaffolds, and integrated sensors) for regenerated tissues and organs. 相似文献
2.
Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
下载免费PDF全文
![点击此处可从《Advanced materials (Deerfield Beach, Fla.)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Rouhollah D. Farahani Martine Dubé Daniel Therriault 《Advanced materials (Deerfield Beach, Fla.)》2016,28(28):5794-5821
The integration of nanotechnology into three‐dimensional printing (3DP) offers huge potential and opportunities for the manufacturing of 3D engineered materials exhibiting optimized properties and multifunctionality. The literature relating to different 3DP techniques used to fabricate 3D structures at the macro‐ and microscale made of nanocomposite materials is reviewed here. The current state‐of‐the‐art fabrication methods, their main characteristics (e.g., resolutions, advantages, limitations), the process parameters, and materials requirements are discussed. A comprehensive review is carried out on the use of metal‐ and carbon‐based nanomaterials incorporated into polymers or hydrogels for the manufacturing of 3D structures, mostly at the microscale, using different 3D‐printing techniques. Several methods, including but not limited to micro‐stereolithography, extrusion‐based direct‐write technologies, inkjet‐printing techniques, and popular powder‐bed technology, are discussed. Various examples of 3D nanocomposite macro‐ and microstructures manufactured using different 3D‐printing technologies for a wide range of domains such as microelectromechanical systems (MEMS), lab‐on‐a‐chip, microfluidics, engineered materials and composites, microelectronics, tissue engineering, and biosystems are reviewed. Parallel advances on materials and techniques are still required in order to employ the full potential of 3D printing of multifunctional nanocomposites. 相似文献
3.
4.
《工程(英文)》2018,4(5):729-742
Donor shortages for organ transplantations are a major clinical challenge worldwide. Potential risks that are inevitably encountered with traditional methods include complications, secondary injuries, and limited source donors. Three-dimensional (3D) printing technology holds the potential to solve these limitations; it can be used to rapidly manufacture personalized tissue engineering scaffolds, repair tissue defects in situ with cells, and even directly print tissue and organs. Such printed implants and organs not only perfectly match the patient’s damaged tissue, but can also have engineered material microstructures and cell arrangements to promote cell growth and differentiation. Thus, such implants allow the desired tissue repair to be achieved, and could eventually solve the donor-shortage problem. This review summarizes relevant studies and recent progress on four levels, introduces different types of biomedical materials, and discusses existing problems and development issues with 3D printing that are related to materials and to the construction of extracellular matrix in vitro for medical applications. 相似文献
5.
David Chimene Roland Kaunas Akhilesh K. Gaharwar 《Advanced materials (Deerfield Beach, Fla.)》2020,32(1):1902026
Bioprinting is an emerging approach for fabricating cell-laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell-friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next-generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue-specific functions. These next-generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom-up perspective provides a materials-centric approach to bioink design for 3D bioprinting. 相似文献
6.
7.
Recent advances in materials science and three‐dimensional (3D) printing hold great promises to conceive new classes of multifunctional materials and components for functional devices and products. Various functionalities (e.g., mechanical, electrical, and thermal properties, magnetism) can be offered by the nano‐ and micro‐reinforcements to the non‐functional pure printing materials for the realization of advanced materials and innovative systems. In addition, the ability to print 3D structures in a layer‐by‐layer manner enables manufacturing of highly‐customized complex features and allows an efficient control over the properties of fabricated structures. Here, the authors present a brief overview mainly over the latest progresses in 3D printing of multifunctional polymer nanocomposites and microfiber‐reinforced composites including the benefits, limitations, and potential applications. Only those 3D printing techniques that are compatible with polymer nanocomposites and composites, that is, materials that have already been used as printing materials, are introduced. The very hot topic of 3D printing of thermoplastic composites featuring continuous microfibers is also briefly introduced. 相似文献
8.
9.
10.
11.
12.
A New 3D Printing Strategy by Harnessing Deformation,Instability, and Fracture of Viscoelastic Inks
下载免费PDF全文
![点击此处可从《Advanced materials (Deerfield Beach, Fla.)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Direct ink writing (DIW) has demonstrated great potential as a multimaterial multifunctional fabrication method in areas as diverse as electronics, structural materials, tissue engineering, and soft robotics. During DIW, viscoelastic inks are extruded out of a 3D printer's nozzle as printed fibers, which are deposited into patterns when the nozzle moves. Hence, the resolution of printed fibers is commonly limited by the nozzle's diameter, and the printed pattern is limited by the motion paths. These limits have severely hampered innovations and applications of DIW 3D printing. Here, a new strategy to exceed the limits of DIW 3D printing by harnessing deformation, instability, and fracture of viscoelastic inks is reported. It is shown that a single nozzle can print fibers with resolution much finer than the nozzle diameter by stretching the extruded ink, and print various thickened or curved patterns with straight nozzle motions by accumulating the ink. A quantitative phase diagram is constructed to rationally select parameters for the new strategy. Further, applications including structures with tunable stiffening, 3D structures with gradient and programmable swelling properties, all printed with a single nozzle are demonstrated. The current work demonstrates that the mechanics of inks plays a critical role in developing 3D printing technology. 相似文献
13.
14.
《工程(英文)》2021,7(7):966-978
Three-dimensional (3D) bioprinting based on traditional 3D printing is an emerging technology that is used to precisely assemble biocompatible materials and cells or bioactive factors into advanced tissue engineering solutions. Similar technology, particularly photo-cured bioprinting strategies, plays an important role in the field of tissue engineering research. The successful implementation of 3D bioprinting is based on the properties of photopolymerized materials. Photocrosslinkable hydrogel is an attractive biomaterial that is polymerized rapidly and enables process control in space and time. Photopolymerization is frequently initiated by ultraviolet (UV) or visible light. However, UV light may cause cell damage and thereby, affect cell viability. Thus, visible light is considered to be more biocompatible than UV light for bioprinting. In this review, we provide an overview of photo curing-based bioprinting technologies, and describe a visible light crosslinkable bioink, including its crosslinking mechanisms, types of visible light initiator, and biomedical applications. We also discuss existing challenges and prospects of visible light-induced 3D bioprinting devices and hydrogels in biomedical areas. 相似文献
15.
壳聚糖作为一种天然高分子有机物,具有良好的生物相容性、可降解性和抗菌性,在抗菌方面已有一定的应用,但其抗菌性能易受自身因素和外界条件的影响,因此如何巩固和加强壳聚糖的抗菌性能并进行应用成为了研究的热点。将壳聚糖与无机物纳米材料复合,有机和无机组分协同互补,能显著提高材料的抗菌性能,复合材料还具有优异的机械强度和生物相容性,可广泛应用于水处理、食品、纺织、化妆品和医学等领域,引起了科研人员的密切关注。本文总结了壳聚糖的抗菌机理和影响抗菌性能的因素,详细介绍了壳聚糖与金属、金属氧化物、层状硅酸盐和碳材料等无机物复合后的纳米材料在抗菌方面的应用,同时对其在抗菌领域的发展前景进行了展望。 相似文献
16.
17.
Alexander Groetsch Samuel Stelzl Yannick Nagel Tatiana Kochetkova Nadim C. Scherrer Aleksandr Ovsianikov Johann Michler Laszlo Pethö Gilberto Siqueira Gustav Nyström Jakob Schwiedrzik 《Small (Weinheim an der Bergstrasse, Germany)》2023,19(3):2202470
The increasing demand for functional materials and an efficient use of sustainable resources makes the search for new material systems an ever growing endeavor. With this respect, architected (meta-)materials attract considerable interest. Their fabrication at the micro- and nanoscale, however, remains a challenge, especially for composites with highly different phases and unmodified reinforcement fillers. This study demonstrates that it is possible to create a non-cytotoxic nanocomposite ink reinforced by a sustainable phase, cellulose nanocrystals (CNCs), to print and tune complex 3D architectures using two-photon polymerization, thus, advancing the state of knowledge toward the microscale. Micro-compression, high-res scanning electron microscopy, (polarised) Raman spectroscopy, and composite modeling are used to study the structure-property relationships. A 100% stiffness increase is observed already at 4.5 wt% CNC while reaching a high photo-polymerization degree of ≈80% for both neat polymers and CNC-composites. Polarized Raman and the Halpin–Tsai composite-model suggest a random CNC orientation within the polymer matrix. The microscale approach can be used to tune arbitrary small scale CNC-reinforced polymer-composites with comparable feature sizes. The new insights pave the way for future applications where the 3D printing of small structures is essential to improve performances of tissue-scaffolds, extend bio-electronics applications or tailor microscale energy-absorption devices. 相似文献
18.
Marcel Alexander Heinrich Wanjun Liu Andrea Jimenez Jingzhou Yang Ali Akpek Xiao Liu Qingmeng Pi Xuan Mu Ning Hu Raymond Michel Schiffelers Jai Prakash Jingwei Xie Yu Shrike Zhang 《Small (Weinheim an der Bergstrasse, Germany)》2019,15(23)
Over the last decades, the fabrication of 3D tissues has become commonplace in tissue engineering and regenerative medicine. However, conventional 3D biofabrication techniques such as scaffolding, microengineering, and fiber and cell sheet engineering are limited in their capacity to fabricate complex tissue constructs with the required precision and controllability that is needed to replicate biologically relevant tissues. To this end, 3D bioprinting offers great versatility to fabricate biomimetic, volumetric tissues that are structurally and functionally relevant. It enables precise control of the composition, spatial distribution, and architecture of resulting constructs facilitating the recapitulation of the delicate shapes and structures of targeted organs and tissues. This Review systematically covers the history of bioprinting and the most recent advances in instrumentation and methods. It then focuses on the requirements for bioinks and cells to achieve optimal fabrication of biomimetic constructs. Next, emerging evolutions and future directions of bioprinting are discussed, such as freeform, high‐resolution, multimaterial, and 4D bioprinting. Finally, the translational potential of bioprinting and bioprinted tissues of various categories are presented and the Review is concluded by exemplifying commercially available bioprinting platforms. 相似文献
19.
Si3N4/SiC纳米复合陶瓷的制备,结构和性能 总被引:6,自引:0,他引:6
Si3N4/SiCU纳米复合陶瓷是近年发展起来的高温高温度结构材料,它通过纳米SiC颗粒在Si3N4基体中的弥散达到强化增韧的效果。研究表明,这种增韧方法所获得的室温和高温机械性能均远远高于其它的增韧方法。本文综述了Si3N4/SiC纳米复合陶瓷在制备、结构和性能方面的研究成果,指出了尚待解决的问题和今后的研究方向。 相似文献
20.
Hydrogels: Near‐Infrared Light‐Sensitive Polyvinyl Alcohol Hydrogel Photoresist for Spatiotemporal Control of Cell‐Instructive 3D Microenvironments (Adv. Mater. 10/2018)
下载免费PDF全文
![点击此处可从《Advanced materials (Deerfield Beach, Fla.)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Xiao‐Hua Qin Xiaopu Wang Markus Rottmar Bradley J. Nelson Katharina Maniura‐Weber 《Advanced materials (Deerfield Beach, Fla.)》2018,30(10)