Effects of Manufacturing Processes on Microstructure and Properties of Al/A356–B4C Composites

Liquid and semi-solid stir casting processes were applied to fabricate B₄C particles-reinforced aluminum–matrix composites. The effects of manufacturing processes on particle distribution, particle/matrix interface, and mechanical properties of the prepared composites were studied. The results show that particle distribution can be significantly improved by using K₂TiF₆–flux and Ti powders in the liquid stir casting process, whereas in the semi-solid stir casting process it could be improved by decreasing the temperature of the slurry. With additions of Ti, the decomposition of B₄C was prevented, and the interfacial bonding strength was significantly improved due to the fact that a TiB₂ layer formed at the particle/matrix interface. Compared to the matrix, the hardness and tensile strength of the Al–B₄C composite fabricated by the liquid stir casting process were increased by 89.6% and 128.8%, respectively; those of the A356–B₄C composite fabricated by the semi-solid stir casting process had no significant improvement due to the weak particle/matrix interface and the presence of particle porosity clusters.