Highly Efficient Circularly Polarized Electroluminescence from Aggregation‐Induced Emission Luminogens with Amplified Chirality and Delayed Fluorescence

Development of highly efficient circularly polarized organic light‐emitting diodes (CPOLEDs) has gained increasing interest as they show improved luminous efficiency and high contract 3D images in OLED displays. In this work, a series of binaphthalene‐containing luminogenic enantiomers with aggregation‐induced emission (AIE) and delayed fluorescence properties is designed and synthesized. These molecules can emit from green to red light depending on the solvent polarity due to the twisted intramolecular charge transfer effect. However, their solid powders show bright light emissions, demonstrating a phenomenon of AIE. All the molecules exhibit Cotton effects and circularly polarized luminescence in toluene solution and films. Multilayer CPOLEDs using the doped and neat films of the molecules as emitting layers are fabricated, which exhibit high external quantum efficiency of up to 9.3% and 3.5% and electroluminescence dissymmetry factor (g_EL) of up to +0.026/?0.021 and +0.06/?0.06, respectively. Compared with doped CPOLEDs, the nondoped ones show higher g_EL and much smaller current efficiency roll‐off due to the stronger AIE effect. By altering the donor unit, the electroluminescence maximum of the doped film can vary from 493 to 571 nm. As far as it is known, this is the first example of efficient CPOLEDs based on small chiral organic molecules.     

Multiresonant Thermally Activated Delayed Fluorescence Emitters Based on Heteroatom‐Doped Nanographenes: Recent Advances and Prospects for Organic Light‐Emitting Diodes

Since the first report in 2015, multiresonant thermally activated delayed fluorescent (MR‐TADF) compounds, a subclass of TADF emitters based on a heteroatom‐doped nanographene material, have come to the fore as attractive hosts as well as emitters for organic light‐emitting diodes (OLEDs). MR‐TADF compounds typically show very narrow‐band emission, high photoluminescence quantum yields, and small ΔE_ST values, typically around 200 meV, coupled with high chemical and thermal stabilities. These materials properties have translated into some of the best reported deep‐blue TADF OLEDs. Here, a detailed review of MR‐TADF compounds and their derivatives reported so far is presented. This review comprehensively documents all MR‐TADF compounds, with a focus on the synthesis, optoelectronic behavior, and OLED performance. In addition, computational approaches are surveyed to accurately model the excited state properties of these compounds.     

Over 10% EQE Near‐Infrared Electroluminescence Based on a Thermally Activated Delayed Fluorescence Emitter

Significant effort has been made to develop novel material systems to improve the efficiency of near‐infrared organic light‐emitting diodes (NIR OLEDs). Of those, fluorescent chromophores are mostly studied because of their advantages in cost and tunability. However, it is still rare for fluorescent NIR emitters to present good color purities in the NIR range and to have high external quantum efficiency (EQE). Here, a wedge‐shaped D‐π‐A‐π‐D emitter APDC‐DTPA with thermally activated delayed fluorescence property and a small single‐triplet splitting (ΔE_st) of 0.14 eV is presented. The non‐doped NIR device exhibits excellent performance with a maximum EQE of 2.19% and a peak wavelength of 777 nm. Remarkably, when 10 wt% of APDC‐DTPA is doped in 1,3,5‐tris(1‐phenyl‐1H‐benzimidazol‐2‐yl)benzene host, an extremely high EQE of 10.19% with an emission peak of 693 nm is achieved. All these values represent the best result for NIR OLEDs based on a pure organic fluorescent emitter with similar device structure and color gamut.     

A Red Thermally Activated Delayed Fluorescence Emitter Simultaneously Having High Photoluminescence Quantum Efficiency and Preferentially Horizontal Emitting Dipole Orientation

The development of red thermally activated delayed fluorescence (TADF) emitters having excellent optoelectronic properties and satisfactory electroluminescence efficiency is full of challenges due to strict molecular design principles. Two red TADF molecules, 3‐(9,9‐dimethylacridin‐10(9H)‐yl)acenaphtho[1,2‐b]quinoxaline‐9,10‐dicarbonitrile and 3‐(2,7‐dimethyl‐10H‐spiro[acridine‐9,9′‐fluoren]‐10‐yl)acenaphtho[1,2‐b]quinoxaline‐9,10‐dicarbonitrile, are developed by adopting a donor–acceptor molecular architecture bearing an electron‐accepting acenaphtho[1,2‐b]quinoxaline‐9,10‐dicarbonitrile (ANQDC) moiety and a 9,9‐dimethyl‐9,10‐dihydroacridine or 2,7‐dimethyl‐10H‐spiro[acridine‐9,9′‐fluorene] electron donor. The combined effects of rigid and planar D/A moieties and highly steric hindrance between D and A groups endow both molecules with high rigidity to suppress nonradiative decay processes, resulting in high photoluminescence quantum efficiencies (Φ_PLs) of up to 95%. Attributed to the linear and planar acceptor motif and rod‐like molecular configuration, both emitters achieve high horizontal ratios of emitting dipole orientation of ≈80%. The organic light‐emitting diodes (OLEDs) based on both emitters exhibit red emissions peaking at ≈615 nm and successfully afford ultrahigh electroluminescence performance with an external quantum efficiency of nearly 28% and a power efficiency of above 50 lm W^?1, on par with the state‐of‐the‐art device efficiency for red TADF OLEDs. This presents a feasible design strategy for excellent TADF emitters simultaneously possessing high Φ_PLs and horizontally aligned emitting dipoles.     

Improving the Efficiency of Red Thermally Activated Delayed Fluorescence Organic Light‐Emitting Diode by Rational Isomer Engineering

The development of efficient red thermally activated delayed fluorescence (TADF) emitters with an emission wavelength beyond 600 nm remains a great challenge for organic light‐emitting diodes (OLEDs). Herein, two pairs of isomers are designed and synthesized by attaching electron‐donor 9,9‐diphenyl‐9,10‐dihydroacridine (DPAC) moiety to the different positions of two kinds of highly rigid planar acceptor cores (PDCN and PPDCN). Their TADF efficiencies and emission maxima (599–726 nm) are regulated by molecular isomer manipulation. Interestingly, the photoluminescence quantum yields (Φ_PLs) of trans‐isomers T‐DA‐1 and T‐DA‐2 (78% and 89%) are remarkably higher than those of their corresponding cis‐isomers C‐DA‐1 and C‐DA‐2 (12% and 14%). Significantly increased Φ_PL values can be explained by single crystal structures and theoretical simulation. As a result, a deep red TADF‐OLED based on T‐DA‐2 displays a maximum external quantum efficiency (EQE) of 26.26% at 640 nm. Notably, at a brightness of 100 cd m^?2, the EQE value of T‐DA‐2‐based device still remains at an extremely high level of 23.95%, representing the highest value for reported red TADF‐OLEDs at the same brightness. These results provide a reasonable pathway to optimize optoelectronic properties and thereby construct efficient red TADF emitters through rational isomer engineering.     

Rational Molecular Design for Deep‐Blue Thermally Activated Delayed Fluorescence Emitters

By simple modification of the functional groups on the donor unit, the thermally activated delayed fluorescence (TADF) properties of emitters can easily be manipulated. A series of deep blue to blue emissive TADF derivatives is developed, capable of deep‐blue emissions from 403 to 460 nm in toluene. Deep‐blue organic light‐emitting diodes (OLEDs) based on this series of TADF emitters are fabricated, resulting in an electroluminescence peak at 428 nm and a high external quantum efficiency of up to 10.3%. One deep‐blue OLED has achieved the commission internationale de l'eclairage (CIE) coordinates of (0.156, 0.063), which is among the best reported TADF performances for deep‐blue OLEDs with CIE_y < 0.07.     

Modulating Backbone Conjugation of Polymeric Thermally Activated Delayed Fluorescence Emitters for High-Efficiency Blue OLEDs

Blue conjugated polymers-based OLEDs with both high efficiency and low efficiency roll-off are under big challenge. Herein, a strategy of local conjugation is proposed to construct high-efficiency blue-emitting conjugated polymers, in which the conjugation degree of polymeric backbones is adjusted by inserting different spacers. In this way, the energy level of triplet state and the energy transfer direction of the polymeric main-chains can be effectively regulated. Benefiting from such fine regulation, the prepared alternative copolymers Alt-PB36 with local conjugated main-chains can better suppress the accumulation of long-lived triplet excitons comparing with the complete conjugated polymers. The higher PLQY of Alt-PB36 also verifies the effective energy transfer from the polymeric main-chains to the TADF units. Accordingly, Alt-PB36 based solution-processed OLEDs achieve an EQE_max of 11.6% and a very low efficiency roll-off of 2.8% at 100 cd m⁻² and 15.2% at 500 cd m⁻². This result represents the best efficiency among blue light-emitting conjugated polymer-based OLEDs so far under high luminance.     

Singlet–Triplet Splitting Energy Management via Acceptor Substitution: Complanation Molecular Design for Deep‐Blue Thermally Activated Delayed Fluorescence Emitters and Organic Light‐Emitting Diodes Application

A barely reached balance between weak intramolecular‐charge‐transfer (ICT) and small singlet–triplet splitting energy (ΔE_ST) for reverse intersystem crossing from non‐emissive triplet state to radiative singlet state impedes the realization of deep‐blue thermally activated delayed fluorescence (TADF) materials. By discarding the twisted‐ICT framework for a flattened molecular backbone and introducing a strong acceptor possessing n–π* transition character, hypsochromic color, a large radiative rate (k_F), and small ΔE_ST are achieved simultaneously. Six molecules with a 9,9‐dimethyl‐10‐phenyl‐9,10‐dihydroacridine (i‐DMAc) donor are synthesized and investigated. Coinciding with time‐dependent density functional theory, the reduced dihedral angles between donor (D) and acceptor (A) weaken ICT from dispersed charge density and enable a large k_F from increased frontier molecular orbitals overlap. Despite the separated highest occupied (HOMO) and lowest unoccupied molecular orbital (LUMO) population, the intercalation of phenyl bridges between D–A increases k_F but significantly lowers the local triplet excited state, indicating small HOMO and LUMO overlap is not a sufficient, but necessary condition for reduced ΔE_ST. Integrating short conjugation length and carbonyl or triazine acceptors into the complanation molecules, deep‐blue TADF organic light‐emitting diodes demonstrate maximum external quantum efficiencies of 11.5% and 10.9% with Commission Internationale de l'Eclairage coordinates of (0.16, 0.09) and (0.15, 0.11), respectively, which is quite close to the stringent National Television System Committee blue standard.     

Charge‐Transfer Exciton Manipulation Based on Hydrogen Bond for Efficient White Thermally Activated Delayed Fluorescence

Despite the success of thermally activated delayed fluorescence (TADF) emitters in monochromatic organic light‐emitting diodes (OLED), only few efficient full‐TADF white OLEDs (WOLED) are reported because of the challenge in rational exciton allocation between blue and other color emitters. Herein, it is demonstrated that the appropriate exciton delocalization in blue TADF matrixes can simultaneously support the sufficient blue emission and the energy loss–free charge and exciton transfer to yellow TADF emitters. Through introducing steric hindrance–modulated intermolecular hydrogen bond networks, a fluorinated carbazole‐phosphine oxide hybrid realizes the balance of exciton localization and delocalization, giving rise to state‐of‐the‐art external quantum efficiency beyond 20% from its simple trilayer full‐TADF WOLEDs, accompanied by excellent spectral stability. The correlation between the efficiencies of the blue TADF matrixes and their intermolecular interactions reveals that the exciton delocalization is crucial for the exciton allocation optimization in multicomponent emission systems.     

High‐Performance Dibenzoheteraborin‐Based Thermally Activated Delayed Fluorescence Emitters: Molecular Architectonics for Concurrently Achieving Narrowband Emission and Efficient Triplet–Singlet Spin Conversion

Thermally activated delayed fluorescence (TADF) materials, which enable the full harvesting of singlet and triplet excited states for light emission, are expected as the third‐generation emitters for organic light‐emitting diodes (OLEDs), superseding the conventional fluorescence and phosphorescence materials. High photoluminescence quantum yield (Φ_PL), narrow‐band emission (or high color purity), and short delayed fluorescence lifetime are all strongly desired for practical applications. However, to date, no rational design strategy of TADF emitters is established to fulfill these requirements. Here, an epoch‐making design strategy is proposed for producing high‐performance TADF emitters that concurrently exhibiting high Φ_PL values close to 100%, narrow emission bandwidths, and short emission lifetimes of ≈1 µs, with a fast reverse intersystem crossing rate of over 10⁶ s^?1. A new family of TADF emitters based on dibenzoheteraborins is introduced, which enable both doped and non‐doped TADF‐OLEDs to achieve markedly high external electroluminescence quantum efficiencies, exceeding 20%, and negligible efficiency roll‐offs at a practical high luminance. Systematic photophysical and theoretical investigations and device evaluations for these dibenzoheteraborin‐based TADF emitters are reported here.     

Efficiency Enhancement of Organic Light‐Emitting Diodes Incorporating a Highly Oriented Thermally Activated Delayed Fluorescence Emitter

An organic light‐emitting diode (OLED) with the blue emitter CC2TA showing thermally activated delayed fluorescence (TADF) is presented exhibiting an external quantum efficiency () of 11% ± 1%, which clearly exceeds the classical limit for fluorescent OLEDs. The analysis of the emission layer by angular dependent photoluminescence (PL) measurements shows a very high degree of 92% horizontally oriented transition dipole moments. Excited states lifetime measurements of the prompt fluorescent component under PL excitation yield a radiative quantum efficiency of 55% of the emitting species. Thus, the radiative exciton fraction has to be significantly higher than 25% due to TADF. Performing a simulation based efficiency analysis for the OLED under investigation allows for a quantification of individual contributions to the efficiency increase originating from horizontal emitter orientation and TADF. Remarkably, the strong horizontal emitter orientation leads to a light‐outcoupling efficiency of more than 30%.     

Design Strategy of Blue and Yellow Thermally Activated Delayed Fluorescence Emitters and Their All‐Fluorescence White OLEDs with External Quantum Efficiency beyond 20%

Two thioxanthone‐derived isomeric series of thermally activated delayed fluorescence (TADF) emitters 1,6‐2TPA‐TX/3,6‐2TPA‐TX and 1,6‐2TPA‐TXO/3,6‐2TPA‐TXO are developed for organic light‐emitting diodes (OLEDs). Blue emission devices based on symmetrical 3,6‐2TPA‐TX with common vertical transition route realize an extremely high external quantum efficiency (EQE) of 23.7%, and an ever highest EQE of 24.3% is achieved for yellow emission devices based on 3,6‐2TPA‐TXO by solely changing the sulfur atom valence state of the thioxanthone core. In contrast, their corresponding asymmetric isomers are affected by intramolecular energy transfer and more severely by a nonradiative deactivation pathway, to give much low EQE values (<5%). By utilizing 3,6‐2TPA‐TX as a blue emitter and 3,6‐2TPA‐TXO as a yellow emitter, an ever highest EQE of 20.4% is achieved for all‐fluorescence white OLEDs.     

Constructing High-Efficiency Orange-Red Thermally Activated Delayed Fluorescence Polymers by Excited State Energy Levels Regulation via Backbone Engineering

Thermally activated delayed fluorescence (TADF) materials have attracted extensive attention because of their 100% theoretical exciton utilization. Solution-processable orange-red TADF polymers are one of indispensable participants. Herein, a series of orange-red TADF polymers with dibenzothiophene (DBT) and carbazole (Cz) units as joint backbones are synthesized. Their performance can be successfully optimized by regulating the connection positions of DBT units through backbone engineering. It is found that the pNAI37 series with DBT units embedded in the polymeric backbones at the 3, 7 sites display a better performance than those connected at the 2, 8 sites. The optimal polymer, pNAI3705, exhibits a better excited state nature, leading to the photoluminescence quantum yield of 60%. Consequently, pNAI3705 based organic light-emitting diodes reach a maximum external quantum efficiency of 20.16%, and maintain 10.61% at 500 cd m⁻², which is in first tier among orange-red polymers. These results unambiguously suggest the potential application of the combined DBT and Cz backbones in TADF polymers. This design strategy may provide a versatile approach for optimizing the properties of TADF polymers through backbone engineering.     

High-Performance Solution-Processed Nondoped Circularly Polarized OLEDs with Chiral Triptycene Scaffold-Based TADF Emitters Realizing Over 20% External Quantum Efficiency

Recently, circularly polarized organic light-emitting diodes (CP-OLEDs) fabricated with thermally activated delayed fluorescence (TADF) emitters are developed rapidly. However, most devices are fabricated by vacuum deposition technology, and developing efficient solution-processed CP-OLEDs, especially nondoped devices, is still a challenge. Herein, a pair of triptycene-based enantiomers, (S,S)-/(R,R)-TpAc-TRZ, are synthesized. The novel chiral triptycene scaffold of enantiomers avoids their intermolecular π–π stacking, which is conducive to their aggregation-induced emission characteristics and high photoluminescence quantum yield of 85% in the solid state. Moreover, the triptycene-based enantiomers exhibit efficient TADF activities with a small singlet-triplet energy gap (ΔE_ST) of 0.03 eV and delayed fluorescence lifetime of 1.1 µs, as well as intense circularly polarized luminescence with dissymmetry factors (|g_PL|) of about 1.9 × 10⁻³. The solution-processed nondoped CP-OLEDs based on (S,S)-/(R,R)-TpAc-TRZ not only display obvious circularly polarized electroluminescence signals with g_EL values of +1.5 × 10⁻³ and −2.0 × 10⁻³, respectively, but also achieve high efficiencies with external quantum, current, and power efficiency up to 25.5%, 88.6 cd A⁻¹, and 95.9 lm W⁻¹, respectively.     

Thermally Activated Delayed Fluorescence Warm White Organic Light Emitting Devices with External Quantum Efficiencies Over 30%

While monochrome organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) emitters have achieved over 30% external quantum efficiencies (EQEs), all-TADF white OLEDs (WOLEDs) are still lagging behind. Herein, a simple system based on two color-complementary TADF emitters is exploited to realize high-performance WOLEDs. By doping a high-performance orange–red TADF fluorophor (BPPZ-DPXZ) into a blue TADF host (DBFCz-Trz), energy transfer, and triplet-to-singlet conversion in the host-dopant system can be optimized to simultaneously achieve full exciton utilization and color balance. With this design, all-TADF single-emitting-layer WOLEDs with a maximum EQE up to 32.8% are demonstrated. This high efficiency surpasses EQEs of reported WOLEDs based on both TADF as well as phosphorescence. It is expected that this finding can provide new insight for designing highly efficient all-TADF WOLEDs.     

Enabling Record-high Deep-Red/Near-Infrared Electroluminescence Through Subtly Managing Intermolecular Interactions of a Thermally Activated Delayed Fluorescence Emitter

Deep-red/near-infrared (DR/NIR) organic light-emitting diodes (OLEDs) are promising for applications such as night-vision readable marking, bioimaging, and photodynamic therapy. To tune emission spectra into the DR/NIR region, red emitters generally require assistance from intermolecular interactions. But such interactions generally lead to sharp efficiency declines resulting from unwanted quenching events. To overcome this challenge, herein, an advanced method via strategically managing the intermolecular interactions of thermally activated delayed fluorescence (TADF) emitters is proposed. The proof-of-concept molecule called DCN-SPTPA exhibits impressive resistance to quenching while delivering controllable aggregation behavior for redshifting the emission by installing an end-spiro group. Consequently, two emitters demonstrate similar photophysical properties and device performance at very low doping levels; while DCN-SPTPA -based OLEDs demonstrate a 1.3–1.4-fold enhancement of the external quantum efficiencies (EQEs) with respect to the control molecule at 5–20 wt.% doping ratios, affording DR/NIR emission at 656, 688, 696, and 716 nm with record-breaking EQEs of 36.1%, 29.3%, 28.2%, and 24.0%, respectively. Moreover, DCN-SPTPA -based nondoped NIR device also retains a state-of-the-art EQE of 2.61% peaked at 800 nm. This work first demonstrates instructive guidance for accurately manipulating the intermolecular interactions of red TADF emitters, which will spur future developments in high-performance DR/NIR OLEDs.     

Achieving High‐Performance Nondoped OLEDs with Extremely Small Efficiency Roll‐Off by Combining Aggregation‐Induced Emission and Thermally Activated Delayed Fluorescence

Luminescent materials with thermally activated delayed fluorescence (TADF) can harvest singlet and triplet excitons to afford high electroluminescence (EL) efficiencies for organic light‐emitting diodes (OLEDs). However, TADF emitters generally have to be dispersed into host matrices to suppress emission quenching and/or exciton annihilation, and most doped OLEDs of TADF emitters encounter a thorny problem of swift efficiency roll‐off as luminance increases. To address this issue, in this study, a new tailor‐made luminogen (dibenzothiophene‐benzoyl‐9,9‐dimethyl‐9,10‐dihydroacridine, DBT‐BZ‐DMAC) with an unsymmetrical structure is synthesized and investigated by crystallography, theoretical calculation, spectroscopies, etc. It shows aggregation‐induced emission, prominent TADF, and interesting mechanoluminescence property. Doped OLEDs of DBT‐BZ‐DMAC show high peak current and external quantum efficiencies of up to 51.7 cd A^?1 and 17.9%, respectively, but the efficiency roll‐off is large at high luminance. High‐performance nondoped OLED is also achieved with neat film of DBT‐BZ‐DMAC, providing excellent maxima EL efficiencies of 43.3 cd A^?1 and 14.2%, negligible current efficiency roll‐off of 0.46%, and external quantum efficiency roll‐off approaching null from peak values to those at 1000 cd m^?2. To the best of the authors' knowledge, this is one of the most efficient nondoped TADF OLEDs with small efficiency roll‐off reported so far.     

Highly Efficient Triplet-Triplet-Annihilation Upconversion Sensitized by a Thermally Activated Delayed Fluorescence Molecule in Optical Microcavities

Triplet-triplet-annihilation (TTA) upconversion sensitized by a new thermally activated delayed fluorescence (TADF) molecule, BTZ-DMAC-4Br, is investigated in whispering gallery mode (WGM) microcavities made of toluene solutions filled into quartz capillaries. Since the utilization of the excitation light is improved in WGM microcavities through total internal reflection, the upconversion efficiency is enhanced greatly and an upconversion quantum yield of 24.6% is observed, which is a dozen times higher than that measured in conventional cuvettes. To the best of knowledge, this is the highest upconversion efficiency achieved in TADF sensitized TTA systems. Not only is a new material designed, but also the results provide a novel way to improve the TTA upconversion performance by utilizing the optical cavity effect, and the TTA microcavities may be used to construct highly efficient and low-threshold photonic devices in many applications.     

High‐Performance Hybrid White Organic Light‐Emitting Diodes with Superior Efficiency/Color Rendering Index/Color Stability and Low Efficiency Roll‐Off Based on a Blue Thermally Activated Delayed Fluorescent Emitter

Thermally activated delayed fluorescence (TADF)‐based white organic light‐emitting diodes (WOLEDs) are highly attractive because the TADF emitters provide a promising alternative route to harvest triplet excitons. One of the major challenges is to achieve superior efficiency/color rendering index/color stability and low efficiency roll‐off simultaneously. In this paper, high‐performance hybrid WOLEDs are demonstrated by employing an efficient blue TADF emitter combined with red and green phosphorescent emitters. The resulting WOLED shows the maximum external quantum efficiency, current efficiency, and power efficiency of 23.0%, 51.0 cd A^?1, and 51.7 lm W^?1, respectively. Moreover, the device exhibits extremely stable electroluminescence spectra with a high color rendering index of 89 and Commission Internationale de L'Eclairage coordinates of (0.438, 0.438) at the practical brightness of 1000 cd m^?2. The achievement of these excellent performances is systematically investigated by versatile experimental and theoretical evidences, from which it is concluded that the utilization of a blue‐green‐red cascade energy transfer structure and the precise manipulation of charges and excitons are the key points. It can be anticipated that this work might be a starting point for further research towards high‐performance hybrid WOLEDs.