基于最小生成树的LEACH协议改进

LEACH(Low Energy Adaptive Clustering Hierarchy)是一种被广泛应用于无线传感网络的路由协议.本文针对LEACH协议中,远距离节点作为簇首时能量消耗过多的缺点,提出了一种改进的无线传感网络路由协议.多跳传输LEACH改进协议在节点选出簇首之后,采用最小生成树中Prim算法,在簇首与基站间采用多跳传输.为克服多跳传输时距基站第一跳的簇首能量消耗较多的缺点,阈值需要采用节点距基站的距离和节点距簇首的平均距离来调整,已达到平衡节点能量消耗的目的.仿真结果表明,改进的算法可减少和均衡能量消耗,提高能量的使用,以及延长整个网络寿命方面具有很大的优势.     

一种无线传感器网络分簇路由算法研究

在分析LEACH协议的基础上提出一种基于能量和距离的多跳路由算法（CAED）。由基站依据节点剩余能量和簇头与基站的距离分别选出二层簇头,簇内节点利用单跳和多跳模式与簇头进行通信。仿真实验表明,新算法有效地平衡了节点的能量消耗,并显著地延长了网络的生命周期。     

基于TinyOS的无线传感器网络LEACH算法的改进

LEACH协议是无线传感器网络中最流行的分簇路由协议之一.针对LEACH算法簇分布不均匀以及网络能耗不均衡等问题提出了一种高效节能多跳路由算法.在簇建立阶段,新算法根据网络模型计算出最优簇头间距值,调整节点通信半径以控制簇的大小,形成合理网络拓扑结构;在数据传输阶段,簇头与基站之间采用多跳的通信方式,降低了节点能耗.在TinyOS操作系统下,使用nesC语言设计实现了LEACH-EEMH算法.基于TOSSIM平台的仿真结果表明,新算法较LEACH算法在均衡网络能耗、延长网络寿命方面具有显著优势.     

非变换簇的WSN分簇路由算法

针对LEACH算法簇头选取及能量消耗方面的不足,提出一种基于能量、距离和节点度的分簇路由算法CMEDD,通过均匀分簇减少重建过程,对簇头选举公式进行改进,合理选择簇头,从而均衡节点能耗。采用基于代价因子的单跳和多跳相结合的方式建立最优路径进行数据传输。仿真结果表明,与LEACH算法和RMCRW算法相比,CMEDD算法能够有效均衡节点能耗,可相对延长网络生存周期。     

基于混沌粒子群与蚁群算法的WSN路由协议

为了降低无线传感器网络（WSN）能量消耗,延长网络生存周期,提出了一种基于混沌粒子群（CPSO）和蚁群算法相结合的路由协议。该协议针对典型的分簇协议LEACH（Low-Energy Adaptive Clustering Hierarchy）协议的簇头选择进行了优化,考虑了节点剩余能量和簇内密集性等因素,采用新的混沌粒子群算法对簇头选择进行优化。然后,针对LEACH协议簇头到基站采用单跳通信,容易使簇头早亡的问题,采用蚁群算法优化簇头到基站的路由路径,减少通信消耗的能量。仿真结果表明,与传统的LEACH协议相比,新的协议能有效减少能量消耗,延长网络生命周期。     

一种基于蚁群优化的分簇路由算法

在无线传感器网络路由协议的研究中,能量高效是其首要设计目标.传统LEACH协议产生簇头数目比较随机,并且簇头直接与基站通信导致能量消耗过快.在分析传统和改进LEACH路由协议的基础上,提出了一种簇头数目固定的簇头选择机制,解决了簇头分布不均匀的问题.并且将蚁群优化算法应用到无线传感器网络的路径选择中,利用蚁群的动态适应性和寻优能力,在簇头与基站之间形成一条最优路径进行通信.在Matlab平台下对新提出的算法进行仿真测试实验,实验结果表明,相对于LEACH路由协议,该算法降低了平均能量消耗,延长了网络的生命周期.     

基于遗传算法和蚁群算法的LEACH改进协议

针对无线传感器网络低功耗自适应集簇分层(Low Energy Adaptive Clustering Hierarchy, LEACH)路由协议因能耗不均衡导致节点过早死亡的问题,提出了一种基于遗传算法和蚁群算法改进的LEACH路由协议。在分簇阶段,通过遗传算法选举合理的簇头节点并根据节点的分布划分簇群;在数据传输阶段,通过蚁群算法使簇头节点尽可能选择能量充足且距离较短的路径进行数据传输。仿真结果表明,与传统的分簇路由协议LEACH和LEACH-C相比,改进算法可以使网络的能量消耗更加均衡,并延长网络的生命周期。     

一种改进的基于时间竞争成簇的路由算法

为平衡无线传感器网络中的簇头负载并进一步降低多跳传输能耗,文中提出了一种改进的基于时间竞争成簇的路由算法。该算法通过限制近基站节点成簇入簇,以防止近基站节点成簇入簇的节能收益无法补偿成簇入簇能耗;利用基站广播公共信息和基于时间机制成簇,以减少节点基本信息交换能耗;通过候选簇头中继来平衡簇头负载。候选簇头的评价函数综合考虑了剩余能量和最优跳数的理想路径,以期在保持中继负载平衡的基础上尽量降低多跳能耗。仿真结果显示,该算法较LEACH和DEBUC算法延长了以30%节点死亡为网络失效的网络生存周期,表明该算法在降低节点能耗和平衡负载方面是有效的。     

基于数据融合的无线传感器网络路由算法

在分簇协议LEACH和链状协议PEGASIS的基础上,提出一种新的基于数据融合的分簇路由算法.簇首节点采用多跳方式传输数据,并根据周围节点的密集程度构造不同大小的簇;簇内节点计算上行和下行节点构造数据融合树,采用时分复用调度算法进行多跳路由.NS2仿真结果表明该路由算法均衡了各个节点的能量消耗,延长了网络存活时间,并降低了网络延迟.     

无线传感器网络能量均衡分簇路由协议

LEACH是无线传感器网络(Wireless Sensor Network,WSN)中一种经典的分层式路由协议,在此基础上通过对LEACH成簇算法及簇间路由的改进,提出了一种新的均衡能量消耗分簇路由协议。该协议在无线传感器网络成簇过程中充分考虑了传感器节点的能量状态,同时簇首向基站的通信采用基于能量的簇间路由。理论分析及仿真结果表明,改进的协议能够均衡传感器节点的能量消耗,有效地延长网络寿命。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.