Synthesis and binding properties of polymeric calix[4]arene nitriles

Two new polymers containing pendant calix[4]arene units with nitrile functionalities at their lower rim have been synthesized via radical initiated reactions involving a vinylic monomer 6 {5,11,17,23-tetra-tert-butyl-25,26,27-tris(cyanomethoxy)-28-(2-acryloyloxy) ethoxycalix[4]arene} and with styrene. A five atom spacer group was incorporated between the bulky calixarene core and the acrylate moiety in order to minimize steric interactions which proved to impede the polymerization. The complexation studies were made by using liquid–liquid extraction procedures. It has been deduced from the observations that both polymers show a good selectivity towards Hg²⁺ like their precursor 5,11,17,23-tetra-tert-butyl-25,26,27-tricyanomethoxy-28-(2-hydroxy)ethoxycalix[4]arene 5, which supports their utility as adsorbents or potential candidate materials for fabricating membranes and sensors, which can separate or detect Hg²⁺ metal ions in a high selectivity.     

Electrochemical oxidation of <Emphasis Type="Italic">p</Emphasis>-sulfonated calix[8]arene

The water-soluble p-sulfonated sodium salt of calix[8]arene (III) was synthesized. The product was characterized by FT-IR, NMR and UV–Vis spectra.Then the electrochemical behaviors of p-sulfonated sodium salt of calix[8]arene in NaAc+HAc (pH = 4) buffer solution was studied. In aqueous solution, p-sulfonated calix[8]arene can be oxidized when the potential is more than 0.7 V vs SCE. It was confirmed that the reaction was a two-electron irreversible electrochemical reaction. The transfer coefficient, α, was measured as 0.7. At 25°, the diffusion coefficient of p-sulfonated calix[8]arene was determined as 8.6 × 10⁻⁷ cm² s⁻¹. The diffusion activation energy of p-sulfonated calix[8]arene was 18.9 kJ mol⁻¹ at pH = 4.     

Mass transfer kinetics of neodymium(III) extraction by calix[4]arene carboxylic acid using a constant interfacial area cell with laminar flow

BACKGROUND: Thermodynamics and kinetics data are both important to explain the extraction property. In order to develop a novel separation technology superior to current extraction systems, many promising extractants have been developed including calixarene carboxylic acids. The extraction thermodynamics behavior of calix[4]arene carboxylic acids has been reported extensively. In this study, the mass transfer kinetics of neodymium(III) and the interfacial behavior of calix[4]arene carboxylic acid were investigated. RESULTS: The rate constant (K_ao) becomes constant when the stirring speed was controlled between 250 rpm and 400 rpm. The activation energy (E_a) was calculated to be 21·41 kJ mol^?1 or 88·17 kJ mol^?1 (dependent on temperature) from the slope of log K_ao against 1000/T. The linear relationship between the specific area and the extraction rate is the characteristic of an interfacial reaction control. The minimum bulk concentration of the extractant necessary to saturate the interface (C_min) is lower than 4·19 × 10^?4 mol L^?1. CONCLUSION: The effect of stirring speed, temperature, and species concentration on the extraction rate demonstrates that the extraction regime depends on the extraction conditions. The chemical reaction control governs the extraction regime at temperatures below 303 K and a mixed control regime occurs when the temperature is between 303 K and 318 K. The probable locale for the chemical reaction is at the liquid–liquid interface and the rate equation is deduced to be: ? d[Nd³⁺]_(a)/dt = k_f[Nd³⁺]_(a)[H₄A]_(o)^0·727[H⁺]_(a)^?0·978. The rate‐controlling step was suggested by the analysis of the experimental results. Copyright © 2008 Society of Chemical Industry     

Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of calix[4]arene-based copolyethers and polyurethanes. Ionophoric properties and extraction abilities towards metal cations of polymeric calix[4]arene urethanes

Copolyethers and polyurethanes containing lower and upper rim calix[4]arene units in the fixed cone conformation were prepared in good yield by polycondensation reactions of distal calix[4]arene diols with bisphenol-A/dibromomethane and 2,4-tolylendiisocyanate (TDI), respectively. In a similar way were prepared calix[4]arene-crown-5 and -crown-6 polyurethanes in the fixed 1,3-alternate conformation by condensation of TDI with lower rim calixcrown-5 and calixcrown-6 diols. However, the poor solubility in common organic solvents of the copolyether derivatives (M_w=11,100-11,600 g/mol) hampered further studies on their ionophoric properties. Aiming to obtain model compounds for the investigation of both extraction abilities and ionophoric properties of the polyurethane materials, several bis-urethanes were also synthesized by reaction of the calix[4]arene diols with p-tolylisocyanate (TI). The extraction ability measurements of monomeric and polymeric calix[4]arene urethanes (M_w=12,300-83,500 g/mol) towards alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and Ag⁺showed a remarkable efficiency and selectivity of calixcrown-6 polyurethane toward Rb⁺, Cs⁺and Ag⁺.     

Synthesis of Calix[4]arene-Based Thiourea Derivatives for Extraction of Toxic Dichromate and Arsenate Ions

In the environment, the presence of toxic oxyanions such as Cr(VI) and As(V), especially in drinking water, creates serious hazards to human health. For efficient and selective detection of these species; novel calix[4]arene-based thiourea derivatives which obtained using p-tert-butylcalix[4]arene as starting material have been prepared from m-aniline or o-aniline or o-aminophenol in moderate yield. The structures of all new synthesized compounds obtained from these reactions were determined by using FTIR, ¹H, and ¹³C NMR spectroscopy. The complexing properties of calix[4]arene-based thiourea derivatives have been studied towards the As(V) and Cr(VI). It was found that calix[4]arene-based thiourea derivative 5,11,17,23-tetra-tert-butyl-25,27-bis(o-amino-phenylthioureido propoxy)-26,28-hydroxycalix[4]arene is an effective extractant for carrying HCr₂O₇^2? anions.     

杯[4]芳烃偶氮衍生物的合成及其金属离子萃取性能

杯芳烃作为超分子化学的重要组成部分,近年来得到了快速发展并成为化学家的研究热点。以脱叔丁基-杯[4]芳烃为原料合成了杯[4]芳烃偶氮衍生物,其结构经IR和1H NMR所表征。研究了该主体分子对金属离子的萃取性能,实验结果表明,该主体分子对Mg2＋具有较高的萃取作用。讨论了主客体间配位作用的机制。     

Droplet-based microreactor system for stepwise recovery of precious metal ions from real metal waste with calix[4]arene derivatives

ABSTRACT

Stepwise recovery of silver(I), palladium(II) and platinum(IV) with suitable calix[4]arene extractants was carried out by investigating the extraction and stripping process using a droplet-based microreactor system. The highest percentages of silver, palladium (100%) and platinum ion (37.2%) were extracted from a real waste only within 4.00s using a microreactor system compared with 24 and 72 h to reach extraction equilibrium in a batch method. Fourier transform infrared spectroscopy studies revealed a very good relation in peak shifts on the metal complexation with calix[4]arene derivatives after extraction and stripping. The droplet-based microreactor system emerges as an effective tool to be applied in metal recovery.     

杯[4]芳烃咪唑盐的微波合成及在氟化反应中的应用

以杯[4]芳烃为起始原料,首先制得中间体杯[4]芳烃双溴代烷基衍生物,然后经微波辐射和阴离子交换,共得9种杯[4]芳烃咪唑盐衍生物,化合物的结构与构象经元素分析、IR、1HNMR、19FNMR、31PNMR表征.研究了它们在对氯硝基苯氟化反应中的催化性能以及对K+的萃取性能.结果表明,这9种化合物在氟化反应中的催化效果良好,对氟硝基苯的收率为80.89％～92.67％;同时化合物对K+具有较好的萃取效果,其中以化合物25,27-二[4-(3-甲基咪唑)乙氧基]-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃六氟磷酸盐的萃取效果最好,萃取率可达75.45％.     

Poly (acrylic acid-co-acryloyl tetrasodium thiacalix[4]arene tetrasulfonate) grafted dextrin: new supper metal ion adsorbing hydrogels

Dextrin as a biodegradable natural polymer has hydrophilic nature that capable to increase the swelling properties and biodegradability of the synthetic hydrogels. This study describes the synthesis of a poly (acrylic acid-co-acryloyl tetrasodium thiacalix[4]arene tetrasulfonate) grafted dextrin superabsorbent hydrogels (ADA) via solution polymerization. The effects of acryloyl tetrasodium thiacalix[4]arene tetrasulfonate (ACSTCA) dose (20–60) on swelling properties of the hydrogels were studied. The synthesized hydrogels were characterized by FTIR, TGA, DMTA and rheometry. The metal ion removal capacity of the gels was investigated by atomic absorption for Cd²⁺, Pb²⁺, and Hg²⁺. The tendency of metal ions adsorption decreased in the order of Pb²⁺>Cd²⁺>Hg²⁺. The effect of key operating parameters including ACSTCA content, contact time, adsorbent dosage, solution pH, and crosslinker density was experimentally studied on Pb²⁺ adsorption from aqueous solution. The equilibrium data was analyzed using Langmuir and Freundlich adsorption isotherms. Our experimental data are in best agreement with Freundlich isotherms, and adsorption of metal cation onto hydrogel followed a pseudo second-order kinetic model. According to the thermodynamic parameters, the adsorption of Pb²⁺ occurred spontaneously. The hydrogels could be regenerated after releasing heavy metal ions, and reused 5 times with less than 7 % loss of adsorption capacity.     

Synthesis of Various Calix[4]arene Derivatives with Mercaptoalkyl Chains and Their Application in Removing Cr(VI) from Aqueous Solution

Four different mercaptoalkyl-substituted calixarene derivatives (5,11,17,23-tetra-tert-butyl-25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(5-mercaptopentanoxyl)-26,28-dihydroxycalix[4]arene and 5,17-di-tert-butyl-11,23-di-carboxyl-26,28-bis(3-mercaptopropoxyl)-25,27-di-hydroxycalix[4]arene) were synthesized. Their structures were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H and ¹³C NMR spectroscopy, and elemental analysis techniques. Moreover, their extraction capabilities at different parameters such as pH, shaking speed, and shaking time were examined toward dichromate ions. Results implied that all mercaptoalkyl-substituted calixarene derivatives showed an extraction capability toward dichromate anion while the carboxyl-functionalized calixarene-marcapto-alkyl derivative exhibited the highest extraction capability.     

Dichromate Extraction by Calix[4]arene Appended Amberlite XAD-4 Resin

In the present article a comparative extraction efficiency of dichromate by a calix[4]arene derivative (d) and a newly synthesized calix[4]arene appended Amberlite XAD-4 resin (5) are reported. The liquid and solid phase extraction methods have been applied to ascertain the extraction efficiency of both the calix[4]arene derivative and the resin. Different parameters have been optimized such as pH, dosage, concentration, and temperature. Analysis of experimental data has been carried out by log-log plot analyses and the determination of characteristic parameters of each isotherm model such as Freundlich, Langmuir, and Dubinin-Radushkevich (D-R). The kinetic adsorption experiments show that the adsorption process follows pseudo second order kinetics. The adsorption mechanism has been investigated by Reichenberg (R-B) and Morris-Webster equations. From the thermodynamic parameters it is concluded that the adsorption process is endothermic and spontaneous in nature at higher temperature. The results show that the resin-5 has good capability to efficiently remove dichromate from aqueous media.     

Synthesis and characterization of new optically active polymers carrying calix[4]arene and amino acid units in the main chain and their binding properties towards toxic heavy metals

BACKGROUND: A series of novel optically active polymers containing upper rim calix[4]arene was prepared from the polycondensation reaction of calix diamine derivative 2 with two optically active diacid chlorides. RESULTS: The optically active compounds were prepared from the reaction of a pyromellitic dianhydride with two chiral amino acids. The optically active polymers were obtained in a yield of 80–86% and had an inherent viscosity of 0.20–0.26 dL g^?1. The polymers were characterized using Fourier transform infrared and ¹H NMR spectroscopy and elemental analysis. Studies of the complexation of the polymers towards some alkali metal and toxic transition metal cations were performed using solid–liquid sorption procedures and comparisons made with the starting monomer. CONCLUSION: It is evident from the complexation studies that the polymers investigated are good polymeric ionophores for alkali metal cations like Na⁺ and K⁺, for Ag⁺ and for toxic heavy metal cations such as Cu²⁺, Co²⁺, Cd²⁺ and Hg²⁺. These polymers are good candidates for use in chiral stationary phases for separation of enantiomers in ionic media, as well for removing metal ions. Copyright © 2009 Society of Chemical Industry     

Voltammetric characterization of selective potassium ion transfer across micro-water/1,2-dichloroethane interface facilitated by a novel calix[4]arene derivative

In this study, transfer reactions of alkali and alkaline-earth metal ions across a micro-water/1,2-dichloroethane (1,2-DCE) interface facilitated by a novel calix[4]arene derivative, 5,11,17,23-tetra-tert-butyl-25,27-bis(2′amino-methylpyridine)-26,28-dihydroxy calix[4]arene (APHC4), were investigated by cyclic and differential pulse voltammetry techniques. Well-defined voltammetric behavior was obtained only for K⁺ ion among the used metal ions. The electrochemical data were used to determine the stoichiometry and the appropriate association constant of the occurring complex between K⁺ ion and APHC4. The obtained steady-state voltammograms indicated that the facilitated transfer process occurs with a TIC/TID mechanism according to 1:1 stoichiometry. The logarithm of the association constant () of K(APHC4)⁺ complex in the DCE phase was calculated to be 6.32. Also, the availability of the facilitated transfer for the design of an amperometric screening sensor for K⁺ ion was evaluated in the range of 50–500 μmol dm⁻³.     

Mixed 8-oxyquinolinecalix[4]arene/phenanthroline receptors as luminescence sensors for zinc(II) ions

The luminescence behavior of bis-(8-oxyquinoline)calix[4]arene is practically centered on the quinoline chromophore, but involves efficient energy transfer from the calix[4]arene moiety. In the presence of Zn²⁺ ions, coordination of the quinoline groups is observed, leading to characteristic changes in the absorption, fluorescence and NMR spectra. Energy transfer from the calix[4]arene moiety is precluded by the coordination of the Zn²⁺ ions. In the resulting complex, a significant decrease in the emission quantum yields takes place. However, by incorporating an additional batho-phenanthroline ligand, a great emission enhancement has been detected, revealing the occurrence of synergistic effects in the bis-(8-oxyquinoline)calix[4]arene(batho-phenanthroline)zinc(II) complex.     

Selective Extraction of Fe3+ Cation by Calixarene-Based Cyclic Ligands

Abstract

The selective liquid-liquid extraction of Fe³⁺ cation from the aqueous phase to the organic phase was carried out by using p-tert-butylcalix[4]arene [L₁], ca-lix[4]arene [L₂], p-nitro-calix[4]arene [L₃], calix[4]arene p-sulfonic acid [L₄], p-(diethylamino)methylcalixt4]arene [L₅], tetramethyl-p-tert-butylcalix[4]arene tet-raketone [L₆], 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone [L₇], calix[4]arene-bearing dioxime group on the lower rim [L₈], and a monooxime [L₉]. The effect of varying pH upon the extraction ability of calixarenes substituted with electron-donating and electron-withdrawing groups at their p-position was examined. Observed results were compared with those found for unsubstituted calix[4]arene.     

Allosteric Coextraction of Sodium and Metal Ions with Calix[4]Arene Derivatives 3. Effect of Propyl Groups on Size-Discrimination for the Second Coextracted Ion

A calix[4]arene derivative containing two propyl groups and two acetic acids at each distal position has been synthesized and investigated for alkali metal extraction in individual and competitive systems. In an individual system, lithium ion simultaneously loads on a single molecule of the extraction reagent up to 200%, while sodium and potassium ions load up to 150% and 100%, respectively. In a competitive system, sodium as the first ion and lithium as the second among three ions each load up to 100%. The peak shift of the extraction reagent by using ¹H-NMR spectroscopy was investigated to elucidate the extraction mechanism of alkali metals in individual and competitive systems. The complex structures and extraction reactions for three ions are proposed from the results obtained. Size discrimination is observed not only for extraction of the first ion, but also the second ion as facilitated by an allosteric effect. Coordinatively-inert propyl groups provide a narrow coordination space for the discrimination of the second coextracted ion.     

对叔丁基杯[4]及杯[6]芳烃的合成及其对铜离子的萃取研究

以对叔丁基苯酚和甲醛为原料,分别对对叔丁基杯[4]及杯[6]芳烃的合成和萃取性质进行了研究．结果表明,在本研究范围内,以KOH为催化剂,对叔丁基杯[6]芳烃的最高产率为77．8％;以NaOH为催化剂,对叔丁基杯[4]芳烃的最高产率为47．3％。对于对叔丁基杯[4]和杯[6]芳烃,最佳的反应回流温度都为140℃。对叔丁基杯[6]芳烃对模拟废水中的铜离子具有一定的萃取效果,最高萃取率为70．3％。     

Highly Lipophilic,Mono-ionizable Calix[4]arene-benzocrown-6 Extractants for Removal of Radiocesium from Nuclear Wastes

A series of lipophilic, proton-ionizable calix[4]arene-benzocrown-6 compounds with calixarene units locked in the 1,3-alternate conformation was prepared for evaluation of their potential as radiocesium ion extractants. Upon ionization of the pendant acidic function, the ligand provides the requisite anion for the formation of an electroneutral extraction complex, thereby markedly increasing Cs⁺ extraction efficiency. To enhance the lipophilicity, each proton-ionizable calix[4]arene-crown-6 ligand bears a (2-ethylhexyl)benzo unit and two octyl groups. By use of radiotracer techniques for Cs⁺ and Na⁺ and ICP spectrometry for K⁺, the ligands were evaluated in terms of the efficiency and selectivity with which they extract Cs⁺ from aqueous solutions into toluene. Supplementary materials are available for this article. Go to the publisher's online edition of Solvent Extraction and Ion Exchange to view the supplementary file.     

Novel linear molecular aggregation tethered by hydrogen-Bonded interaction within the crystalline calix[4]arene derivatives

Single crystals of two calix[4]arene derivatives, that is, 5,11,17,23-tetra-tert-butyl- 25,27-bis[2-[N-(3-methoxy-4-methoxy-benzylidene)-amino]ethoxy]-26,28- dihydroxy calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[3- pyridine carbonyl-amino]ethoxy]-26,28-dihydroxy calix[4]arene (2), were prepared and their crystal structures have been determined by X-ray crystallographic study. As compared with calix[4]arene derivative 1 possessing CN functional group, compound 2 bearing the NH group could form not only intermolecular hydrogen bonds between the hydrogen atom in NH group and the oxygen atom in CO of an adjacent calix[4]arene molecule, but also intramolecular hydrogen bonds between the N—H⋯OC moieties in solid state, giving a rare linear molecular aggregation.