THERMODYNAMICS OF ALKALI AND ALKALINE EARTH METAL ION - EXCHANGE ON CERIUM(IV) HYDROGEN PHOSPHATE

ABSTRACT

Thermodynamics of alkali and alkaline earth metal ions/hydrogen ions exchange on a fibrous cerium(IV) hydrogen phosphate have been investigated. Selectivities for alkali and alkaline earth metal ions increase in the order; Na⁺<<K⁺<Rb⁺<Cs⁺ and Mg²⁺<Ca²⁺<Sr²⁺<Ba²⁺, respectively. The enthalpy changes for alkali metal and Ba2+ ions/H⁺ exchange are negative, those for the other alkaline earth metal ions/H⁺ exchange are positive, indicating that the enthalpy changes for monovalent ions are more favorable than those for divalent ions. In comparison with ions of the same valency, the enthalpy change decreases with the atomic number of the metal ion corresponding to a decrease in the entropy change of dehydration in response to enthalpy-entropy compensation.     

Ribose-protected thioguanosine-based 1H NMR spectroscopic probe for the detection of cesium from solid cesium-containing sources in acetonitrile

Ribose-protected thioguanosine (TG) exhibited remarkable preference for cesium over other alkali metal (Na⁺, K⁺, Rb⁺) and alkaline earth metal ions (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺) in acetonitrile by ¹H NMR measurements. Furthermore, TG displayed excellent sensitivity for cesium even under 500/1 NaCl/CsCl and KCl/CsCl environments. The most distinct feature is that only in a cesium environment, the thioamide NH peak becomes highly broadened and finally disappeared, and the amino NH₂ peak shows a downfield shift, suggesting that TG-based ¹H NMR spectroscopic probe is factually useful for the detection of cesium from solid cesium-containing sources in organic solvents.     

SYNTHETIC INORGANIC ION-EXCHANGE MATERIALS. XXXXI. ION EXCHANGE EQUILIBRIA OF ALKALI METAL IONS/HYDROGEN IONS ON TIN(IV) ANTIMONATE

Ion exchange equilibria of alkali metal ions (Li⁺, Na⁺, K⁺,, Rb⁺, and Cs⁺)H⁺, systems have been studied in MNO-j-HNOj media with ionic strength of 0.1 at 30, 45 and 60 °C on tin(IV) antimonate as a cation exchanger. The ion exchange isotherms have been measured for both forward and backward reactions by the batch technique. The isotherms showed S-shaped curves for all exchange systems studied. The selectivity coefficients (logarithmic scale) vary with the equivalent fraction X_M of alkali metal ions in the exchanger and give two linear functions of X_M with a break point (X_M= 0.14, except 0.04 for Li⁺, /H⁺) indicating two different exchanging sites. The selectivity sequence, Na⁺, ? K⁺, ? Rb⁺, ? Cs⁺, ? ? Li, holds in the range of Xu= (0 - 0.04) and the sequence, Cs < Rb ⁺, ? K ⁺, ? Na ⁺, < Li ⁺, applies when X_M is higher than 0.14.

Hypothetical thermodynamic data on “zero loading” of the ion exchange reaction was evaluated.     

Rapid Separation of Tl+ and Pb2+ from Various Binary Cation Mixtures Using Dicyclohexano-18-crown-6 Incorporated into Emulsion Membranes

Abstract

Relative transport rates of metal cation nitrates (Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, Tl⁺, Ca²⁺, Sr²⁺, Ba²⁺, and Pb²⁺) in a water-toluene-water emulsion membrane system were measured. The toluene component contained the surfactant Span 80 and the crown ether dicyclohexano-18-crown-6. The aqueous receiving phase contained Li₄P2O₇. When each metal cation was individually present in the aqueous source phase, metal extraction was complete within 10 min with the order of extraction being Tl⁺ > Cs⁺ > Ag⁺ > Rb⁺ > K⁺ ≥m Na⁺ and Pb⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ for uni-and bivalent cations, respectively. Significant extraction was found for all cations except Na⁺, K⁺, and Ba²⁺. Some metal ions were concentrated nearly 10-fold in a 10-min period. Relative transport rates were determined when binary cation mixtures of either Tl⁺ or Pb²⁺ were present at equal concentrations with each of the remaining metal ions in the source phase. Tl⁺, when present with either Na⁺, Cs⁺, or Rb⁺, was selectively extracted from the source phase. Complete and nearly exclusive extraction of Pb²⁺ was observed in the presence of all cations including Tl⁺. The enrichment ratios of Pb²⁺ in the binary mixtures were approximately 10 while those of the second cation were less than 0.5 except for Sr²⁺ which was 0.86. Corresponding separation factors for Pb²⁺ ranged from 1000 to > 6000.     

SYNTHESIS AND CHARACTERIZATION OF THE ION EXCHANGE PROPERTIES OF A SPHERICALLY GRANULATED SODIUM ALUMINOPHOSPHATESILICATE

ABSTRACT

Spherically granulated sodium aluminosilicophosphate (APS) of the empirical formula Na₄Al₄PS₁₈O_46.5 18H₂O was synthesized by a gel method. The APS was characterized by elemental analysis, X-ray diffraction, TGA and ²⁷AI, ²⁸Si and ³¹P MAS NMR spectroscopy methods. Ion exchange of alkali, alkaline earth and some other divalent metal cations by APS was studied in batch conditions. It was found that the APS has a cation exchange capacity of 2.5 meq/g and exhibits rapid kinetics of ion exchange. The ion exchange isotherms of alkali, alkaline earth and some other divalent cations were determined and the corrected selectivity coefficients as a function of metal loading were analyzed. It was found that APS exhibits a high affinity for cesium ion, a moderate affinity for some heavy metal cations (Pb²⁺, Zn⁺) and a low affinity for alkali and alkaline earth metal ions. A testing of the APS in complex solutions suggests that it could be a promising exchanger for treatment of some specific nuclear waste and contaminated environmental and biological liquors from radioactive cesium and toxic heavy metal ions.     

Proton-Ionizable Crown Compounds: Transport of Alkali and Alkaline Earth Cations Using Proton-Ionizable Triazolo Macrocycles

Abstract

The macrocycle-mediated flaxes of the alkali and alkaline earth metal cations have been determined in a H₂O-CH₂Cl₂-H₂O bulk liquid membrane system. Water-insoluble proton-ionizable macrocycles of the triazolo type were used. The proton-ionizable feature allows the coupling of cation transport to reverse H⁺ transport. This feature offers promise for the effective separation and/or concentration of alkali metal ions with the metal transport being driven by a pH gradient. A counter anion in the source phase is not co-transported. Transport of the alkali cations only occurred when the source phase pH was greater than the aqueous pK_a value for the carriers. Transport increased regularly with increasing source phase pH. Transport of alkaline earth cations from neutral pH source phases was minimal. The alkali cation selectivity order was K⁺ > Rb⁺ > Cs⁺ > Na⁺ > Li⁺ for the l8-crown-6 sized macrocycles, while little selectivity was observed with the 15-crown-5 sized macro-cycle.     

Extraction of Alkali Metal Tetraphenylborates by Polyurethane Foam

Abstract

The extraction of alkali metal tetraphenylborates by polyurethane foam was investigated. The extractability sequences are K⁺ ≈ Rb⁺ > Cs⁺ and K⁺ ≈ Rb⁺ ≈ Cs⁺ for polyether and polyester foams, respectively. The high extraction of K⁺ by polyether foam can be explained by the cation chelation mechanism.     

CO<Subscript>2</Subscript> retention ability on alkali cation exchanged titanium silicate,ETS-10

ETS-10 was ion exchanged by various alkali cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) and the BET surface area and pore volume was exactly consistent with cationic size; that is, in the order of Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺. It was observed that a single point adsorption capacity was inversely proportional to cationic size. The largest CO₂ capacity was observed for Li⁺-ETS-10 and it is attributed to greater cation–quadrupole interactions with CO₂ than larger cation. The results also suggests that as the CO₂ loading is increased, the accessibility of adsorbing CO₂ to framework basic O⁻ sites should have become difficult with the increase in cationic size due to the blocking effect by extra-framework CO₂-M⁺. The slight decrease in the slope of adsorption capacity with temperature, especially beyond 373 K for Li⁺-ETS-10 and K⁺-ETS-10 suggests that the adsorption of CO₂ on small alkali cation exchanged-ETS-10 at high temperature is somewhat associated with basic oxygen anion sites in framework due to the existence of large pore. The CO₂-TPD results show that the amount of desorbed CO₂ at higher temperature was proportionally increased due to the increased basicity of oxygen anions in framework. It also shows that the desorption temperature associated with alkali cations in extra-framework (corresponding to low temperature desorption peak) has been lowered with the increase in cationic size, indicating weak cation–quadrupole interactions with CO₂ for larger cations.     

Studies on Cesium Uptake by Phenolic Resins

Abstract

The selective removal of cesium by phenolic ion-exchange resins from highly salted alkaline radioactive solutions was studied. The resins were synthesized by alkaline polycondensation of phenol, resorcinol, catechol, and a resorcinol-catechol mixture with formaldehyde and characterized for their moisture regain, ion-exchange (H⁺→Na⁺) capacity, and distribution coefficient (K_D ) for cesium. The effects of open and sealed curing of the polymers on their properties were studied. The effect of Na⁺, NaOH, and Cs⁺ concentration on the uptake of cesium by resorcinol-formaldehyde resin was investigated, in particular. The chemical, thermal, and radiation stabilities of the polymers were also studied.     

LITHIUM-ION SIEVE PROPERTY OF λ;-TYPE MANGANESE OXIDE

The adsorptive properties of A-Mn0₂for mono and divalent metal ions were investigated by pH titration and by measurements of the distribution coefficients(Kd's) of the metal ions. The pH titration curve showed an apparently monobasic acid type for a H⁺-Li⁺exchange. Those for H⁺-K⁺and H⁺-Cs⁺exchanges were nearly the same as that for blank titration. The lithium ion uptake increased with increasing solution pH and reached 5 meq/g at pH 11. X-ray diffraction analyses showed that the adsorption of lithium ions caused an increase in the lattice constant of a cubic unit cell. The potassium and cesium ion uptakes were nearly zero over a pH range between 4 and 11. A-Mn0₂showed a remarkably high Kd value for lithium ions, compared to a cation exchange resin. The selectivity sequences were Na⁺< K⁺< Rb⁺< Cs⁺<< Li⁺for alkali metal ions, Mg²⁺< Ca²⁺< Sr²⁺< Ba²⁺for alkaline earth metal ions, and Ni²⁺< Zn²⁺< Co²⁺< Cu²⁺for transition metal ions.     

Uptake of cesium and strontium cations by potassium-depleted phlogopite

Phlogopite mica was equilibrated with 1.0 N sodium chloride (NaCl)–0.2 N sodium tetraphenylborate (NaTPB)–0.01 M disodium ethylenediaminetetraacetic acid (EDTA) solution at room temperature resulting in an almost complete removal (92%) of the mica's interlayer K. X-ray powder diffraction analysis provides additional evidence that hydrated Na⁺ ions had almost completely replaced the interlayer K⁺. Following equilibration, the c-axis spacing of the mica increased from 10.0 Å to approximately 12.2 Å. Cesium and Sr ion exchange isotherms indicate that K-depleted phlogopite is highly selective for both elements, the Cs⁺ exchange capacity is 1.26 meq/g or 65% of the theoretical cation exchange capacity and the Sr²⁺ exchange capacity is 1.94 meq/g or 100% of the theoretical exchange capacity of the mica. Kielland plots indicated that the mica was selective for Cs⁺ when the equivalent exchange capacity of Cs⁺ in the exchanger phase (X¯_Cs) was < 0.66 and selective for Sr²⁺ when X¯_Sr < 0.41. At equivalent fractions greater than these levels, layer collapse and/or steric effects limit the diffusion of these ions into the interlayers of the mica. Analysis of the Cs⁺ equilibrated mica utilizing XRD indicated that a collapse of the c-axis spacing had occurred. Based on the high selectivity of < 45-μm K-depleted phlogopite for Sr²⁺ and Cs⁺, this material may prove useful as an inorganic ion exchanger for these radioactive isotopes.     

HYDROTHERMAL SYNTHESIS AND ION EXCHANGE PROPERTIES OF THE NOVEL FRAMEWORK SODIUM AND POTASSIUM NIOBIUM SILICATES

ABSTRACT

Two novel metastable sodium niobium silicates of the empirical formula: Na_l+x?yH_y(Nb_1?xSi_x)O₃ nH₂O, where x=0.33?0.38, y<l+x, n=0,7-l.l (NbSi-Na, 6.0 Å phase), and Na_3-x H_xNb₃Si₂O₁₃ nH₂O, where x<1.5, n=2.5?3.5 (NbSi-Na, 12.6 Å phase), and two novel potassium niobium silicates: K_4?xH_xNb₄SijO₂₂nH₂O, where x<l, n=3.5-4.0 (NbSi-K., 10.0 Å phase), and K_1?xH_xNbSi₄O₁₁nH₂O, where x<0.2, n=0.4-0.5 (NbSi-K, 6.05 Å phase), were synthesized in the homogeneous alkaline reaction system NbCl₅ - SiO₂ - NaOH (KOH) -H₂O₂ - H₂O under mild hydrothermal conditions. The compounds were characterized by elemental analysis, FTIR, TGA, MAS ²⁹Si NMR and X-ray diffraction. It was found that alkali metal niobium silicates have open framework structures. Their ion exchange affinity towards alkali, alkaline earth and some transition metal ions was studied. All alkali metal niobium silicates are moderately acidic ion exchangers. Both sodium niobium silicates show a distinct affinity for Cs⁺ ion among alkali metal ions, whereas potassium niobium silicate, the NbSi-K, 10.0 Å phase, exhibits affinity for Rb⁺ ion. The affinity of the sodium niobium silicate, NbSi-Na, 6.0 Å, toward strontium ion in neutral solutions is equal or superior to the best Sr-selective inorganic ion exchangers. The sodium niobium silicate (NbSi-Na, 12.6 Å phase) exhibits extremely high affinity for Pb²⁺ ion in acidic and neutral media, and both sodium niobium silicates also show a moderate affinity for Hg²⁺ ion in neutral and highly alkaline media. These exchangers could be promising for the treatment of some specific nuclear waste and contaminated environmental and biological liquors containing lead, mercury and radioactive strontium.     

Experimental Foam Fractionation Selectivity Coefficients for the Alkali (Group IA) Metals

Abstract

An experimental investigation is presented of the continuous-flow foam fractionation of each of the colligends Li⁺, K⁺, Rb⁺, and Cs⁺ versus Na⁺, the counterion of the dodecylsulfate anion over the aqueous solution concentration range of 1.0 × 10^?4 to 6.0 × 10^?4 M. Initial experiments with K⁺ confirm the achievement of a single-equilibrium-stage separation. Surfactant selectivity coefficients, defined in terms of a colligend-surfactant counterion exchange model at the interfaces of the rising gas bubbles, are established. They represent the ratio of colligend to sodium in the interfacial “stream” to that in the residual steam and are Li⁺, 0.92; K⁺, 1.10; Rb⁺, 1.51; Cs⁺, 1.65. The selectivity sequence is compared to the sequence of absolute partial molal entropies of the cations in aqueous solution.     

Interactions of Some Hofmeister Cations with Sodium Dodecyl Sulfate in Aqueous Solution

In this work, we have investigated the influence of some alkali metal ions on the Krafft temperature (T_K) and critical micelle concentration (CMC) of a classical ionic surfactant, sodium dodecyl sulfate (SDS), over a wide range of temperature. The alkali metal cations such as Li⁺, Na⁺, Cs⁺, and K⁺ are found to affect the solubility and hence the T_K of the surfactant. It was observed that kosmotropic Li⁺ lowers the T_K of the surfactant. Due to the common ion effect, the solubility of SDS decreases in the presence of Na⁺, resulting in an increase in the T_K. On the other hand, chaotropic K⁺ and Cs⁺, capable of forming contact ion pairs with the chaotropic dodecyl sulfate ion, lower the solubility and hence elevate the T_K. In terms of decreasing the T_K, the ions follow the trend: Li⁺ > Na⁺ > Cs⁺ > K⁺ except for 0.0025 M CsCl. The added cations screen the charge of the micelle surface and facilitate closer packing of the surfactant with a consequent decrease in the CMC. In terms of the effectiveness in lowering the CMC, the ions follow the order: Cs⁺ > K⁺ > Na⁺ > Li⁺. In the presence of added electrolytes, the γ_CMC values are found to be lower than the corresponding values in pure water. The thermodynamic parameters (Gibbs free energy, enthalpy, and entropy changes) of micellization were calculated to gain insights into the mechanism of the process.     

SYNTHETIC INORGANIC ION-EXCHANGE MATERIALS. XLVIII. ION-EXCHANGE REACTION OF ALKALI METAL IONS/H+ ON MONOCLINIC ANTIMONIC ACID

The pH titration curves of monoclinic antimonic acid (M-SbA) showed apparently monobasic acid for the systems of alkali metal ions/H⁺. The uptake order of the metal ions were K⁺ < Rb⁺ < Cs⁺ < Na⁺ < Li⁺ throughout the pH range studied. The low uptakes of K⁺, Rb⁺, Na⁺ and Cs⁺ at high pH might be due to steric or ion sieve effects for large unhydrated cations on M-SbA. Thermodynamic data were derived for Li⁺/H⁺ exchange on M-SbA from pH titration curve.     

THERMODYNAMICS OF ALKALI AND ALKALINE EARTH METAL ION-EXCHANGE ON ZIRCONIUM SULPHOPHOSPHONATES

The thermodynamics of alkali and alkaline earth metal ion exchange on a layered zirconium sulphophosphonate having the general composition Zr(O₃PC₆H₄SO₃H) _×(HPO₄) _2?× yH₂O have been investigated. Enthalpy and entropy changes accompanying the M²⁺ - H⁺ exchange (M = Na⁺, Cs⁺, Mg²⁺ and Ba²⁺)were determined by the temperature variation method. For the monovalent ions, Na⁺ and Cs⁺, the enthalpy terms favor exchange whereas the entropy terms are unfavorable. In contrast, for the divalent ions, Mg²⁺ and Ba²⁺, the exchange is due to highly favorable entropy terms.     

The catalytic dehydrogenation of cyclohexane and methylcyclohexane over nickel loaded Y zeolites

The dehydrogenation of cyclohexane to benzene and of methylcyclohexane to toluene was investigated over a range of nickel Y zeolites, varying the nickel content and the nature of the alkali metal co-cation (Li⁺, Na⁺, K⁺, Rb⁺ or Cs⁺). The overall reaction is viewed as occuring via a series of consecutive dehydrogenation steps. Catalytic activity is correlated with the reaction time, the reaction temperature, the level of Ni²⁺ exchange and the effects of pyridine adsorption. The level of dehydrogenation is strongly dependent on the mass of supported nickel metal and the surface Bronsted acidity. Catalyst deactivation results from the deposition of coke on the catalyst surface which is promoted with increasing zeolite acidity.     

Cation Transport at 25°C from Binary Cd2+–Mn+ Mixtures in a H2O-CHCl3–H2O Liquid Membrane System Containing a Series of Macrocyclic Carriers[1]

Macrocycle-mediated fluxes of Cd(NO₃)₂ and of several binary mixtures of Cd(NO₃)₂ with the nitrate salt of either Na⁺, K⁺, Rb⁺ Cs⁺, Ag⁺, Ca²⁺, Sr²⁺, Pb²⁺, Zn²⁺, or Cu²⁺ have been determined in a H₂O-CHCl₃–H₂O liquid membrane system. Of the macrocycles studied, 2.2 and 2.2DD most successfully transported Cd²⁺ In the Cd²⁺–Mⁿ⁺ mixtures, Cd²⁺ was transported selectively with 2.2 when Mⁿ⁺ was either an alkali or an alkaline earth cation. However, when Mⁿ⁺ was either Ag⁺, Pb²⁺, or Cu²⁺ the Cd²⁺ flux was reduced sharply. Generally, cation flux was greater for 2.2DD than for 2.2 with selectivity for Cd²⁺ being altered also in several cases. Relative fluxes from binary cation mixtures depend on metal cation radius, macrocycle cavity diameter, ligand ring substituent and log K for metal ion-macrocycle interaction.     

N‐alkylation of chitosan by β‐halopropionic acids in the presence of various acceptors

N‐carboxyethylation of chitosan by β‐halopropionic acids in the presence of various proton and halogen ion acceptors was investigated. It has been observed that carboxyethylation of chitosan in aqueous medium is accompanied by the by‐processes of hydrolysis and dehydrohalogenation of the β‐halopropionic acids yielding β‐hydroxypropionic acid, bis(2‐carboxyethyl) ether, and acrylic acid. Degree of carboxyethyl substitution (DS) of chitosan and the relative rates of the by‐processes varied significantly depending on the conditions used and nature of the proton or halogen ion acceptor. At carboxyethylation of chitosan with the alkaline β‐bromopropionates, the DS increased in the order Cs⁺ < Rb⁺ < K⁺ ～ Na⁺ < Li⁺. For alkaline earth salts BrCH₂CH₂COOM_0.5 (M = Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), the highest DS was obtained with strontium and barium salts, which could be subsequently removed from the reaction mixture by precipitation as sulfates. Among the organic bases applied (tetrabutylammonium hydroxide, triethylamine, trimethylamine, pyridine, 4‐N,N‐dimethylaminopyridine, 2,6‐lutidine, and 1,5‐diazabicyclo[4.3.0] non‐5‐ene), the highest DS was obtained using a moderately strong base triethylamine. For the halogen acceptors (Pb²⁺, Ag⁺, Tl⁺), the stoichiometrically highest DS was achieved in a system comprising iodopropionic acid plus Tl⁺ and a comparable conversion rate was obtained using also a combination of chloropropionic acid and Ag⁺. A novel alternative preparative approach—gel‐state synthesis—was suggested that provides for the highest DS at the optimum reaction conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The role of alkali cations in zeolite synthesis from silicate solutions containing N,N,N-trimethyl-1-adamantammonium cations

Zeolite synthesis from aqueous N,N,N-trimethyl-1-adamantammonium (TMAA⁺)-alkali (Na⁺, K⁺, Rb⁺, and Cs⁺) silicate mixtures is studied using X-ray diffraction, elemental analysis, scanning electron microscopy, and²⁹Si magic angle spinning (MAS),¹H-¹³C cross-polarization (CP) MAS and¹H-²⁹Si CP MAS NMR spectroscopies. SSZ-24 forms in the presence of potassium cations, and SSZ-31 crystallizes in the presence of sodium cations. This is the first report of SSZ-31 synthesis from Na-TMAA silicate mixtures. Unknown silicates form in the presence of rubidium and cesium cations, whereas no crystalline material is observed in synthesis mixtures devoid of alkali cations. The alkali cations do not appear to serve as templates or void fillers during zeolite crystallization, nor do they stabilize soluble silicate anions which serve as building blocks during zeolite crystallization. Rather, the alkali cations appear to regulate the transformation of the amorphous synthesis gel into either crystalline zeolite or other silicate phases.