Effect of Anions on the Extraction of Lanthanides (III) by N,N′‐Dimethyl‐N,N′‐Diphenyl‐3‐Oxapentanediamide

Abstract

The extraction of microquantities of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y by N,N′‐dimethyl‐N,N′‐diphenyl‐3‐oxapentanediamide (DMDPhOPDA) in 1,2‐dichloroethane from aqueous media containing ClO₄ ^?, PF₆ ^?, (CF₃SO₂)₂N^? anions or by DMDPhOPDA in 1,2‐dichloroethane in the presence of 1‐butyl‐3‐methylimidazolium bis[(trifluoremethyl)sulfonyl]imide ([C₄mim][Tf₂N]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) from HNO₃ solutions has been studied. The effect of HNO₃ concentration in the aqueous phase and that of the extractant concentration in the organic phase on the extraction of metal ions is considered. The stoichiometry of the extracted complexes has been determined. The addition of HPF₆ and (CF₃SO₂)₂NH or their salts to the aqueous HNO₃ or HCl solutions leads to an enchancement of lanthanides (III) extraction by DMDPhOPDA. A considerable synergistic effect was observed in the presence of ionic liquids (IL) in the organic phase containing DMDPhOPDA. This effect is connected with the hydrophobic nature of the IL anion. The distribution of ILs between the equilibrium organic and aqueous phases can govern the extractability of lanthanides (III) in DMDPhOPDA‐IL systems.     

Extraction of Actinide(III,IV, V,VI) Ions and TcO4 − by N,N,N′,N′‐Tetraisobutyl‐3‐Oxa‐Glutaramide

Abstract

The extraction behavior of U(VI), Np(V), Pu(IV), Am(III), and TcO₄ ^? with N,N,N′,N′‐tetraisobutyl‐3‐oxa‐glutaramide (TiBOGA) were investigated. An organic phase of 0.2 mol/L TiBOGA in 40/60% (V/V) 1‐octanol/kerosene showed good extractability for actinides (III, IV, V VI) and TcO₄ ^? from aqueous solutions of HNO₃ (0.1 to 4 mol/L). At 25°C, the distribution ratio of the actinide ions (D _An) generally increased as the concentration of HNO₃ in the aqueous phase was increased from 0.1 to 4 mol/L, while the D _Tc at first increased, then decreased, with a maximum of 3.0 at 2 mol/L HNO₃. Based on the slope analysis of the dependence of D _M (M=An or Tc) on the concentrations of reagents, the formula of extracted complexes were assumed to be UO₂L₂(NO₃)₂, NpO₂L₂(NO₃), PuL(NO₃)₄, AmL₃(NO₃)₃, and HL₂(TcO₄) where L=TiBOGA. The enthalpy and entropy of the corresponding extraction reactions, Δ_r H and Δ_r S, were calculated from the dependence of D on temperature in the range of 15–55°C. For U(VI), Np(V), Am(III) and TcO₄ ^?, the extraction reactions are enthalpy driven and disfavored by entropy (Δ_r H<0 and Δ_r S<0). In contrast, the extraction reaction of Pu(IV) is entropy driven and disfavored by enthalpy (Δ_r H>0 and Δ_r S>0). A test run with 0.2 mol/L TiBOGA in 40/60% 1‐octanol/kerosene was performed to separate actinides and TcO₄ ^? from a simulated acidic high‐level liquid waste (HLLW), using tracer amounts of ²³⁸U(VI), ²³⁷Np(V), ²³⁹Pu(IV), ²⁴¹Am(III) and ⁹⁹TcO₄ ^?. The distribution ratios of U(VI), Np(V), Pu(IV), Am(III) and TcO₄ ^? were 12.4, 3.9, 87, >1000 and 1.5, respectively, confirming that TiBOGA is a promising extractant for the separation of all actinides and TcO₄ ^? from acidic HLLW. It is noteworthy that the extractability of TiBOGA for Np(V) from acidic HLLW (D _Np(V)=3.9) is much higher than that of many other extractants that have been studied for the separation of actinides from HLLW.     

Highly Copper(II) Ion‐Selective Transport Through Liquid Membrane Containing N,N′‐bis(salicylidene)‐1,2‐phenyldiamine

Abstract

N,N′‐bis(salicylidene)‐1,2‐phenyldiamine was synthesized for examining their ability to extract and transport Cu²⁺ through a liquid membrane. By using hydrazine sulfate and potassium thiocyanate as reducing agent and acceptor respectively in the receiving phase at the optimum pH of 1.5, the amount of copper transported across the liquid membrane after 3.5 hours was 96%. The selectivity and efficiency of copper transport from aqueous solution containing various metal ions were investigated.     

Synergistic Extraction of Lanthanides(III) by Mixtures of N‐p‐Methoxybenzoyl‐N‐phenylhydroxylamine and 1,10‐Phenanthroline

Abstract

We conducted a study on the equilibrium extraction behavior of the trivalent lanthanide ions (M³⁺), La, Pr, Eu, Ho, and Yb, from tartrate aqueous solutions into chloroform solutions containing N‐p‐methoxybenzoyl‐N‐phenylhydroxylamine (Methoxy‐BPHA, HL) and 1,10‐phenanthroline (phen). The synergistic species extracted was found to be {ML₂(phen) (HL)}⁺(1/2)Tar^2?, where Tar^2? is tartrate ion. The extraction constants were calculated. The extraction separation behavior and extractability of lanthanides are discussed in comparison with the self‐adducted chelate, ML₃(HL)₂, which was extracted in the absence of phen, and synergistic extraction by mixtures of other extractants such as 2‐thenoyltrifluoroacetone, and neutral donors.     

Comparison of Hydrometallurgical Parameters of N,N‐Dialkylamides and of Tri‐n‐Butylphosphate

Straight‐chain N,N‐dihexyloctanamide (DHOA) and branched‐chain N,N‐di(2‐ethylhexyl)isobutyramide (D2EHIBA) have been identified as promising alternatives to tri‐n‐butylphosphate (TBP) for the reprocessing of spent uranium based fuels, and selective extraction of ²³³U from irradiated thorium fuels, respectively. The present work deals with the effects of different hydrodynamic parameters such as viscosity, density, and interfacial tension (IFT) on the phase‐separation time (PST) under uranium and thorium loading conditions. The IFT values have been determined under varying experimental conditions such as the aqueous nitric acid concentration, n‐dodecane purity, ligand concentration, and thorium/uranium loading conditions. These studies have suggested that the quality of n‐dodecane affects the IFT values of different solutions. The IFT values of D2EHIBA changed marginally (23.3 ± 0.9 mNm^?1) against THOREX feed solution for the wide range of D2EHIBA concentration (0.1–1.0 M). However, IFT, viscosity, and PST values increased with uranium loading of 1.1 M DHOA. These studies suggested that a lower phase‐disengagement rate with increased uranium loading was mainly due to the increased viscosity of the loaded 1.1 M DHOA solution.     

Synthesis and properties of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane

A new kind of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was prepared by the anionic polymerization with a “seed solution” as initiator. The synthesis of monomers N,N′-bis(hydroxydiphenylsilyl)tetraphenylcyclodisilazane (BHPTPC), N,N′-bis(chlorodiphenylsilyl)tetraphenylcyclodisilazane (BCPTPC), and 1,3-dichloro-1,1,3,3-tetraphenyldisilazane (DCTPS) are all reported in this study. The synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was characterized by ¹H–NMR, ²⁹Si–NMR, gel permeation chromatography (GPC), and intrinsic viscosity. The thermal stability of the polysiloxane was studied by isothermal gravimetric analysis (IGA). The results demonstrated that the synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane had excellent thermal stability. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 929–933, 2001     

N,N′-乙撑双(硬脂酰胺)

分了C:7H。。一e一NH一CH:CH:一NH一C一Ci:Ha。 C:.H,eN,O: 分子量593 l英文名IN,N‘一Ethylene bis(s-tearanl记e) l国外商品名1 Chemetronwa、一100(Chemetron);Armowax EBS(Armak)书H佣ehst WaxC(Hoechst);AerawaxC(Glyeo),Kemam溉w 20(枷mko);Lubro/EA(ICI)。 l性状】白色至淡黄色粉末或粒状物。熔点130一145℃,闪点约285℃,比重0.98。不溶于水,常温下不溶于乙醇、丙酮等大多数溶剂,可溶于混合二甲苯、菇烯、丁醇、甲基溶纤素及大多数氯代烃类。游离脂肪酸含量低于4%,水份低于。.5%。 【制法】乙撑双硬脂酞胺的制备是…     

Extraction of Uranium(VI) and Thorium(IV) from Nitric Acid Solution by N,N,N′,N′ – Tetraoctylglutaricamide

Synthesis and characterization of N,N,N′,N′-tetraoctylglutaricamide (TOGA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time, temperature, and types of diluents) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.0TOGA and Th(NO₃)₄·1.5TOGA. The apparent equilibrium constant of U(VI) and Th(IV) extraction determined are 3.35 ± 0.03 L³/mol³ and 1.87 ± 0.01 L⁵/mol⁵ at 298 ± 1 K. Thermodynamic parameters such as the free energy(ΔG), enthalpy(ΔH), and entropy(ΔS) changes associated with the extraction processes could be evaluated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Synergistic Extraction of Lanthanides(III) with N‐p‐Methoxybenzoyl‐N‐Phenylhydroxylamine and Neutral Nitrogen Donors

Abstract

We investigated the extraction equilibrium behavior of a series of trivalent lanthanide ions, (M³⁺), La, Pr, Eu, Ho, and Yb, from tartrate aqueous solutions using a chloroform solution containing N‐p‐methoxybenzoyl‐N‐phenylhydroxylamine (Methoxy‐BPHA or HL) combined with an adductant, 1,10‐phenanthroline (phen) or 2,2′‐bipyridyl (bipy). The synergistic species extracted were found to be {ML₂(phen)(HL)}⁺(1/2)Tar^2? and {ML₂(bipy)(HL)₂}⁺(1/2)Tar^2?, where Tar^2? is the tartrate ion. The stoichiometry, the extraction constants, and the separation factors of these systems were determined. We discuss the extractability and the separation factors in comparison with self‐adduct chelates, ML₃(HL)_2,(o), which were formed in the absence of phen or bipy.     

Metal binding properties of poly[N,N,N′,N′-tetrakis(2-hydroxypropyl)ethylenediamine methacrylate]

Summary When incorporated into a polymer hydrogel, the metal chelator, N,N,N,N-tetrakis(2-hydroxypropyl)ethylenediamine (THPED), retains its metal binding properties. The resultant poly(THPED methacrylate) homopolymer is a polybase with displacement binding constants for copper (II) and zinc(II) of-3.11 and-6.55, respectively, as compared to values for THPED of-3.83 and-7.44. The chelating capacity of the polymer for various divalent metal ions at pH 5.5 follows the order Cu>Cd>Co>Zn>Mn, while calcium and magnesium do not bind. Metal ion release curves indicate that after 30 hours, Cd(II), Co(II), Zn(II), and Mn(II) are released at a slow, steady rate, while Cu(II) is not released under experimental conditions.     

Effects of N,N′-Ethylenebis(stearamide) on the Properties of Poly(ethylene terephthalate)/Organo-montmorillonite Nanocomposite

Poly(ethylene terephthalate)/organo-montmorillonite (PET/OMMT) nanocomposites were melt-compounded using twin screw extruder followed by injection molding. N,N′-ethylenebis(stearamide) (EBS) was selected as a dispersing agent to improve the dispersibility and exfoliation of OMMT clay in PET matrix. Morphological properties of the PET/OMMT nanocomposites were examined by using X-ray diffraction analysis, transmission electron microscopy and atomic force microscopy. Thermal properties of the nanocomposites were characterized by using dynamic mechanical thermal analysis. It was found that the OMMT are well dispersed and exfoliated in the presence of EBS. Remarkable enhancement in impact strength and storage modulus of PET/OMMT was achieved by the addition of EBS.     

N,N′-双(3-甲基苯基)-N,N′-二苯基联苯胺的合成

以二苯胺为起始原料,经两步反应合成了有机电致发光材料N,N′ 双(3 甲基苯基) N,N′ 二苯基联苯胺(TPD)。通过优化实验得到最佳的合成工艺为:二苯胺在20℃下,以V(冰醋酸)∶V(水)=1∶4为溶剂,加入重铬酸钾进行反应得N,N′ 二苯基联苯胺,分离提纯后,再加入18 冠 6相转移催化剂,以邻二氯苯为溶剂在氮气保护下与间碘甲苯进行乌尔曼反应,在200℃下反应20h,产物经柱层析和重结晶提纯。TPD收率为85%,较文献提高5%,w(TPD)=99 92%。并用元素分析、红外光谱和核磁共振对产物的结构进行了表征。     

Extraction Properties of 6,6′‐Bis‐(5,6‐dipentyl‐[1,2,4]triazin‐3‐yl)‐[2,2′]bipyridinyl (C5‐BTBP)

Abstract

The extraction of americium(III) and europium(III) into a variety of organic diluents by 6,6′‐bis‐(5,6,‐dipentyl‐[1,2,4]triazin‐3‐yl)‐[2,2′]bipyridinyl (C5‐BTBP) has been investigated. In addition to determining the stoichiometry for the extraction, the dependence of extraction on contact time and temperature was also studied. The resistance of the ligand to gamma irradiation and the possibility to recycle the organic phase after stripping were tested to determine how the molecule would perform in a radiochemical process. Different organic diluents gave different extraction results, ranging from no extraction to distribution ratios of over 1000 for americium(III). In 1,1,2,2‐tetrachloroethane, the extraction and separation of americium from europium and the extraction kinetics were good; a separation factor above 60 was obtained at equilibrium, ～5 min contact time. The extraction capabilities are adequate for C5‐BTBP to be used in a process for separating trivalent actinides from lanthanides. However, C5‐BTBP is susceptible to radiolysis (americium extraction decreases ～80% after a dose of 17 kGy) and may not be the best choice in the processing of spent nuclear fuel. Nonetheless it is a useful starting point for further development of this type of molecule. It could also prove useful for analytical scale separations for which radiolytic instability is less important.     

The nucleation effect of N,N′-bis(benzoyl) alkyl diacid dihydrazides on crystallization of biodegradable poly(l-lactic acid)

Five N,N??-bis(benzoyl) alkyl diacid dihydrazides were synthesized from benzoyl hydrazine and alkyl diacyl dichloride which were derived from alkyl diacid via acylation. PLLA/N,N??-bis(benzoyl) alkyl diacid dihydrazide samples were prepared by melt blending and hot-press forming process. The nucleation effect of N,N??-bis(benzoyl) alkyl diacid dihydrazide on crystallization of biodegradable poly(l-lactic acid) (PLLA) was investigated using differential scanning calorimetry (DSC) and vicat softening analysis. The results showed that five N,N??-bis(benzoyl) alkyl diacid dihydrazides acted as powerful nucleating agent for PLLA; with incorporation of N,N??-bis(benzoyl) alkyl diacid dihydrazide, the crystallization peak became sharper and shifted to higher temperature as the degree of supercooling decreased at a cooling rate of 1?°C/min from melt. The nucleation activities of five N,N??-bis(benzoyl) alkyl diacid dihydrazides were quantitatively determined. It is shown that N,N??-bis(benzoyl) suberic acid dihydrazide has higher nucleating activity than the other N,N??-bis(benzoyl) alkyl diacid dihydrazides. In the presence of N,N??-bis(benzoyl) alkyl diacid dihydrazide, the melting behavior of PLLA is affected significantly. In addition, the thermal stability of PLLA/0.8?% N,N??-bis(benzoyl) alkyl diacid dihydrazide is tested and reported. Compared to the neat PLLA, the onset degradation temperature of PLLA/0.8?% N,N??-bis(benzoyl) alkyl diacid dihydrazide samples has been decreased significantly.     

Extraction of Actinides with Different 6,6′‐Bis(5,6‐Dialkyl‐[1,2,4]‐Triazin‐3‐yl)‐[2,2′]‐Bipyridines (BTBPs)

Abstract

The extraction of Am(III), Th(IV), Np(V), and U(VI) from nitric acid by 6,6′‐bis(5,6‐dialkyl‐[1,2,4]‐triazin‐3‐yl)‐[2,2′]‐bipyridines (C2‐, C4‐, C5‐, and CyMe₄‐BTBP) was studied. Since only americium and neptunium extraction was dependent on the BTBP concentration, computational chemistry was used to explain this behavior. It has been shown that the coordination of the metal played an important role in forming an extractable complex into the organic phase, thus making it possible to extract pentavalent and trivalent elements from tetravalent and hexavalent elements. This is very important, especially because it shows other possible utilizations of a group of molecules meant to separate the actinides from the lanthanides. In addition, the level of extraction at very low or no BTBP concentration was explained by coordination chemistry.     

Extraction Behavior of Actinides and Metal Ions by the Promising Extractant,N,N,N′,N′-Tetraoctyl-3,6-dioxaoctanediamide (DOODA)

Abstract

The extraction of actinides, fission products, some non-nuclear elements, and nitric acid by N,N,N′,N′-tetraoctyl-3,6-dioxaoctanediamide (DOODA-C₈) in dodecane was extensively studied. Also studied was the extraction of HNO₃ and Nd(III) by the tetradodecyl analog of DOODA-C₈ in dodecane. Both extractants contain two ether oxygen atoms in the backbone chain carrying the two amide groups and can thus act as tetradentate ligands. The extractability of actinides decreases in the order Pu(IV) > U(VI), Am(III) > Np(V) in the extraction from nitric acid and Pu(IV) > Am(III) >> U(VI) in the extraction from perchloric acid. Ions of di-, tri-, tetra-, hexa-, and heptavalent metals strongly differ in the extractability by DOODA-C₈ but, except for lanthanides(III), there is no visible correlation of their distribution ratios with ionic radii. Due to the efficient extraction of actinides, weak extraction of fission products, and sufficient extraction capacity, DOODA-C₈ is a promising extractant for the recovery of minor actinides from high-level radioactive wastes.     

2,2′‐(Methylimino)bis(N,N‐dioctylacetamide) (MIDOA), A New Tridentate Extractant for Technetium(VII), Rhenium(VII), Palladium(II), and Plutonium(IV)

2,2′‐(Methylimino)bis(N,N‐dioctylacetamide) (MIDOA) was developed as a new extractant for technetium. MIDOA has a similar backbone to TODGA, N,N,N′,N′‐tetraoctyldiglycolamide, where the nitrogen atom bearing a methyl group replaces the ether oxygen in TODGA. MIDOA is highly lipophilic and ready to use in the HNO₃–n‐dodecane extraction system. The distribution ratio (D) for Tc(VII) is extremely high. In addition, Cr(VI), Re(VII), Mo(VI), W(VI), Pd(II), and Pu(IV) are well extracted by MIDOA. MIDOA has high selectivity toward certain oxometallates. The D(Tc) values decrease gradually with HNO₃, H⁺, and NO₃ ^? concentrations, and the log D vs log [MIDOA] dependence indicates the species extracted to be the 1:1 metal‐ligand complex. It is clear that MIDDA [2,2′‐(methylimino)bis(N,N‐didodecylacetamide)] and IDDA [2,2′‐(imino)bis(N,N‐didodecylacetamide)], which have structures analogous to MIDOA, have similar extraction behavior to that of MIDOA.     

Synthesis of N,N′-Dimethyl-N,N′-Dioctyl-3-Oxadiglycolamide and its Extraction Properties for Lanthanides

Abstract

Tetraalkyl-3-oxadiglycolamides show good prospects in nuclear reprocessing because of their complete incinerability. In addition, their degradation products interfere much less in the separation process when compared with organophosphorus extractants. An asymmetric extractant, N,N′-dimethyl-N,N′-dioctyl-3-oxadiglycolamide, has been synthesized by a five-step process. The compound was applied to the extraction of selected lanthanides from nitric acid solutions using chloroform as diluent. Its extraction properties for lanthanides from nitrate media have been described. The distribution ratio of the selected metal ions has been studied as a function of aqueous HNO₃ concentrations, diglycolamide concentration and temperature.     

Electrochemical study of the stability of the electron-donor—acceptor (EDA) complex between N,N,N′,N′-tetramethyl-p-phenylendiamine and m-dinitrobenzene in acetonitrile

The stability constant of the EDA complex between N,N,N′,N′-tetramethyl-p-phenylendiamine and m-dinitrobenzene in acetonitrile has been studied by cyclic voltammetry and potentiometric titration at constant finite current. For comparison, spectral measurements were made. The spectroscopic techniques allowed us to assume the formation of a 1:1 EDA complex of which stability in acetonitrile is lower than that previously reported in chloroform. This solvent effect is expected for such weak complexes. The electrochemical techniques give a higher value of the stability constant in similar conditions. The possible causes of the discrepancies are discussed. However, the enthalpy and entropy values for the process closely agree in both electrochemical and spectroscopic methods. This is good evidence that both techniques are accounting for the same type of interaction. The electrochemical techniques, and particularly cyclic voltammetry, seem to be fast and sensible methods to study EDA complex interactions in polar aprotic solvents.     

新型环氧树脂N,N′-二(缩水甘油醚)-O-甲苯胺

N,N′-二(缩水甘油醚)-O-甲苯胺,简称 GOT,结构式为(?)鉴于其化学结构是一种芳香族胺的缩水甘油胺,因此,GOT 是一类特殊结构的环氧树脂,在酸、酸酐、多胺、聚酰胺、多元酚等固化剂中,常温或加热固化,便能得到具有优良机械性能、电性能的树脂。GOT 本身又能作其他环氧树脂的稀释剂,特别适宜作