Characterization and adsorption behavior of newly synthesized sodium bis(2-ethylhexyl) sulfosuccinate–cerium (IV) phosphate (AOT–CeP) cation exchanger

A new cationic exchange material, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) with cerium (IV) phosphate (AOT–CeP) has been synthesized. The characterization of the ion exchanger was performed by using infra red spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermo gravimetric analysis/differential thermo gravimetric analysis (TGA/DTA/DTG) and elemental analysis. The ion exchange properties like ion exchange capacity, elution and concentration behavior of AOT–CeP were determined by taking the material into a column and elution of H⁺ was done by NaNO₃. The thermal stability of the ion exchanger was studied by determining ion exchange capacity after heating to different temperatures for one hour. The adsorption studies on AOT–CeP demonstrated that the material is selective for Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions. AOT–CeP was found to be effective for the separation of Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions in the presence of alkali metals/alkaline earth metals. This cationic exchanger was also effective for the removal of Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions in the presence of acid and other transition metal ions. Thus, AOT–CeP can be used for the removal of these ions from the waste water during its treatment.     

Chelation ion‐exchange properties of copolymer resin derived from 4‐hydroxyacetophenone,oxamide, and formaldehyde

A copolymer (4‐HAOF) prepared by condensation of 4‐hydroxyacetophenone and oxamide with formaldehyde in the presence of an acid catalyst proved to be a selective chelating ion‐exchange copolymer for certain metals. Chelating ion‐exchange properties of this copolymer were studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal‐ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Hg²⁺ ions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 787–790, 2003     

Behavior of acrylic acid–itaconic acid hydrogels in swelling,shrinking, and uptakes of some metal ions from aqueous solution

An experimental research of the absorption properties of metal ions onto synthetic hydrogel obtained by solution polymerization of acrylic acid and itaconic acid in presence of N,N′‐methylenebisacrylamide as crosslinking agent was carried out. The swelling behavior in aqueous salt solutions was studied as a function of divalent cation concentration (Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, Hg²⁺) in the external solution ranging from 10^?5 to 1M, at 25°C. The ability of these hydrogels to bind cations was measured at different pH values and metal ion concentrations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 530–536, 2003     

Application of a Novel Hybrid Cation Exchange Material in Metal Ion Separations

A novel hybrid cation exchange material of the class of tetravalent metal acid (TMA) salt, titanium diethylene triamine pentamethylene phosphonate (TiDETPMP) has been synthesized by the sol gel method. The material has been analyzed by spectroscopy and thermal methods. Physico-chemical and ion exchange characteristics have also been studied. The distribution coefficient (K _d ) has been determined in aqueous as well as various electrolyte media/concentrations for Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ (transition metal ions) and Cd²⁺, Hg²⁺, Pb²⁺, Bi³⁺ (heavy metal ions) using TiDETPMP. Based on the differential affinity/selectivity, the breakthrough capacity (BTC) and elution behavior of various metal ions towards TiDETPMP, a few binary and ternary metal ions separations have been carried out.     

ION EXCHANGE PROPERTIES OF THE SODIUM PHLOGOPITE AND BIOTITE

ABSTRACT

The ion exchange behavior of three sodium micas (phlogopite, Ward's Sci.; phlogopite, Suzorite Inc., biotite, Ward's Sci.) towards Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺. Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺ Hg²⁺, Co²⁺, Cu²⁺ Cd²⁺ and Zn²⁺ ions has been studied. The ion exchange isotherms of alkali, alkaline earth and some other divalent cations were determined and concentration equilibrium constants as a function of metal loading and temperature were analyzed. Sodium micas exhibit high affinity for heavy alkali metals with the selectivity order Rb⁺ > Cs⁺ > K⁺. By studying the cesium uptake in the presence of NaNO₃, CaCl₂, NaOH, NaOH+KOH, HNO₃ electrolytes (in the range of 0.01–6 M) it was found that sodium micas could remove cesium efficiently in neutral and alkaline media, which make them promising for certain types of nuclear waste treatment.     

Binding of heavy metal ions by formaldehyde-polymerized peanut skins

Peanut skin, when treated with formaldehyde to polymerize tannins, is a highly efficient substrate for removal of many heavy metal ions from aqueous waste solutions. The ions Ag¹⁺, Cd²⁺, Cr⁶⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, as well as Ca²⁺ and Mg²⁺, were contacted with formaldehyde-treated peanut skin. Quantitative removal could be achieved with Ag¹⁺, Cd²⁺, Cu²⁺, Hg²⁺, Pb²⁺, and Zn²⁺. Capacity of the substrate for ions was promising for Pb²⁺ (2.1 meq/g substrate), Cu²⁺ (3.0 meq/g), and Cd²⁺ (1.3 meq/g). Sorption from a solution containing Cd²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, on a packed column of formaldehyde-treated peanut skin indicated that Hg²⁺, Pb²⁺, and Cu²⁺ were rapidly and completely bound to the packing, while Cd²⁺, Ni²⁺, and Zn²⁺ were poorly bound until the preferred ions had been removed from solution.     

Binding of several heavy metal ions by polyaspartyl polymers and their application to some Chinese herbal medicines

Water‐insoluble polyaspartyl polymers were synthesized by using water as medium instead of organic medium. Taking Ca²⁺ as a reference, the binding of several heavy‐metal ions, including Pb²⁺, Cd²⁺, Hg²⁺, Cr³⁺, Cu²⁺, and Mn²⁺, by polyaspartyl polymers was studied. The experimental results revealed that polyaspartate is an excellent binding agent for the investigated heavy‐metal ions. These cation ions were bound to polyaspartate polymer by the same mechanism as Pb²⁺, which can be explained by ion exchange model. Since polyaspartate has a protein‐resembling structure that is sensitive to trace heavy metal, it was used to remove some trace heavy‐metal elements in Chinese herbal medicines. It was found that polyaspartate material was an effective agent for the removal of Pb²⁺, Cd²⁺, and Hg²⁺ ions from glycyrrhizin, angelica, and gynostemma pentaphyllum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Sorption Studies of Terpolymers Based on p-Nitrophenol,Triethylenetetramine, and Formaldehyde

Terpolymer resins have been synthesized by condensation of p-nitrophenol, triethylenetetramine, and formaldehyde in the presence of 2 M NaOH as a catalyst with different molar proportions of monomers. Newly synthesized terpolymers were proved to be selective chelation ion exchangers for metal ions like Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺. A batch equilibrium study was carried out over a wide pH range, shaking time, and in media of various ionic strengths of different electrolytes and shows higher selectivity for Hg²⁺, Cd²⁺, and Pb²⁺. Distribution ratios of metal ions were found to be increased by increasing pH of solutions; hence the resins can be used to recover certain metals from waste solutions and removal of iron from boiler water.     

C,N‐Pyridylpyrazole‐Based Ligands: Synthesis and Preliminary Use in Metal Ion Extraction

Abstract

The synthesis of new N‐donor pyridylpyrazole ligands with a functionalized arm is described. The complexation capabilities of these compounds towards bivalent metal ions (Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺) and alkali metal ions (K⁺, Na⁺, and Li⁺) were investigated using the liquid‐liquid extraction process. The percentage limits of extraction were determined by atomic absorption measurements.     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.     

Radiation synthesis and application of a hydrogel based on acrylic acid and 2‐mercaptobenzimidazole

A hydrogel based on gamma‐radiation polymerization of acrylic acid (AAc) in the presence of 2‐mercaptobenzimidazole (MBI) and a crosslinking agent was prepared. The properties of this AAc/MBI hydrogel were characterized in terms of gel content, swelling in different solvents, structure morphology, and IR spectroscopy. Moreover, the thermal decomposition behavior of the prepared hydrogel was investigated by thermogravimetric analysis (TGA). The TGA thermograms were also used to determine the different kinetic parameters such as order of reaction and activation energy. The sorption of some divalent metal ions such as Cu²⁺, Pb²⁺, Cd²⁺, and Hg²⁺ by the AAc/MBI hydrogel also was studied. The results showed that the AAc/MBI hydrogel has a higher tendency to swell in water and polar solvents than in nonpolar solvents. The highest metal uptake by the hydrogel was found for Hg²⁺ and Cd²⁺, whereas the lowest was for Cu²⁺ and Pb²⁺ ions. The ratios between the distribution coefficients of the different metals [separation factors (SF)] indicate that the hydrogel has a high selectivity for Hg²⁺ over Cu²⁺ (SF = 10.923) and Pb²⁺ (SF = 19.110). However, the hydrogel prefers Hg²⁺ over Cd²⁺ (SF = 1.356) and showed a high selectivity for Cd²⁺ over Cu²⁺ (SF = 7.822) and Pb²⁺ (SF = 7.240). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1607–1614, 2002     

Synthesis and characterization of a new guar gum 4‐hydroxybenzoic acid resin and its use for the separation of heavy metal ions in industrial effluents

Hydroxybenzoic acid group has been incorporated onto guar gum by modified Porath's method of functionalization of polysaccharides. The newly synthesized guar gum 4‐hydroxybenzoic acid (GHBA) resin was characterized by Fourier‐transform infrared spectroscopy, elemental analysis, ion‐exchange capacity, column reusability, and physicochemical properties. The distribution coefficient (K_d) values and effect of pH on chelation of these metal ions using batch method were studied. The separations of mixture of Fe²⁺, Zn²⁺, Cu²⁺, Cd²⁺, and Pb²⁺ metal ions on GHBA resin on the basis of their distribution coefficient at various pH were also achieved using column chromatography. The effect of experimental parameters such as pH, treatment time, agitation speed, temperature, adsorbent dose, initial metal ion concentration, and flow rate on the removal of metal ions has been also studied. GHBA resin is effective adsorbents for the removal of different toxic metal ions from aqueous solutions and follows the order: Fe²⁺ > Zn²⁺ > Cu²⁺ > Cd²⁺ > Pb²⁺. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers     

Effect of light metal ions on the sorption of heavy metal ions on natural polymers

Dried ground formaldehyde-treated peanut skins, white ash bark, and So. Wisconsin red maple bark are efficient substrates for removal of many heavy metal ions from waste streams, but possible interference by common light metal cations has never been determined. The influence of Ca²⁺, Mg²⁺, or Na⁺ on the removal of the heavy metal ions Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by the above substrates was studied in both batch and packed-column experiments. It was found that Pb²⁺ and Cu²⁺ were minimally affected by the presence of these light metal ions in solution, while the uptake of Cd²⁺ and Zn²⁺ was significantly reduced. Calcium ion produced the greatest effect of the light metals tested.     

Adsorption characteristics of metal ions by CO2-fixing Chlorella sp. HA-1

Single and binary metal systems were employed to investigate the removal characteristics of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by Chlorella sp. HA-1 that were isolated from a CO₂ fixation process. Adsorption test of single metal systems showed that the maximum metal uptakes were 0.767 mmol Pb²⁺, 0.450 mmol Cd²⁺, 0.334 mmol Cu²⁺ and 0.389 mmol Zn²⁺ per gram of dry cell. In the binary metal systems, the metal ions on Chlorella sp. HA-1 were adsorbed selectively according to their adsorption characteristics. Pb²⁺ ions significantly inhibited the adsorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions, while Cu²⁺ ions decreased remarkably the metal uptake of Cd²⁺ and Zn²⁺ ions. The relative adsorption between Cd²⁺ and Zn²⁺ ions was reduced similarly by the presence of the other metal ions.     

Removal of heavy‐metal ions by magnetic beads containing triazole chelating groups

The aim of this study was to prepare magnetic beads that could be used for the removal of heavy‐metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [m‐poly(EGDMA–VTAZ)] beads were produced by suspension polymerization in the presence of a magnetite Fe₃O₄ nanopowder. The specific surface area of the m‐poly(EGDMA–VTAZ) beads was 74.8 m²/g with a diameter range of 150–200 μm, and the swelling ratio was 84%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA–VTAZ) beads was 14.8%. The maximum binding capacities of the m‐poly(EGDMA–VTAZ) beads from aquous solution were 284.3 mg/g for Hg²⁺, 193.8 mg/g for Pb²⁺, 151.5 mg/g for Cu²⁺, 128.1 mg/g for Cd²⁺, and 99.4 mg/g for Zn²⁺. The affinity order on a mass basis was Hg²⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺> Zn²⁺. The binding capacities from synthetic waste water were 178.1 mg/g for Hg²⁺, 132.4 mg/g for Pb²⁺, 83.5 mg/g for Cu²⁺, 54.1 mg/g for Cd²⁺, and 32.4 mg/g for Zn²⁺. The magnetic beads could be regenerated (up to ca. 97%) by a treatment with 0.1M HNO₃. These features make m‐poly(EGDMA–VTAZ) beads potential supports for heavy‐metal removal under a magnetic field. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

New hydrogel containing sulfur compound prepared by γ irradiation and its application for metal recovery

A new hydrogel that contains sulfur is prepared by radiation polymerization and its application for recovery of Hg²⁺, Pb²⁺, Cd²⁺, and Cu²⁺ ions is discussed. The metal hydrogel complexes are isolated and characterized by using different spectroscopic techniques (UV‐visible, IR, NMR, and mass), thermal analysis (TGA and DSC) measurements, and SEM. Also, the mode of complexation is determined using IR and NMR spectroscopy. The scanning electron micrographs show that the hydrogel has a great ability to recover the metal ions in the following order: Hg²⁺ > Cd²⁺ > Pb²⁺ > Cu²⁺. TGA thermograms are used to investigate the mechanism of thermal decomposition. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 955–966, 2000     

Competitive adsorption of Pb, Cu and Cd ions from aqueous solutions by multiwalled carbon nanotubes

The individual and competitive adsorption capacities of Pb²⁺, Cu²⁺ and Cd²⁺ by nitric acid treated multiwalled carbon nanotubes (CNTs) were studied. The maximum sorption capacities calculated by applying the Langmuir equation to single ion adsorption isotherms were 97.08 mg/g for Pb²⁺, 24.49 mg/g for Cu²⁺ and 10.86 mg/g for Cd²⁺ at an equilibrium concentration of 10 mg/l. The competitive adsorption studies showed that the affinity order of three metal ions adsorbed by CNTs is Pb²⁺>Cu²⁺>Cd²⁺. The Langmuir adsorption model can represent experimental data of Pb²⁺ and Cu²⁺ well, but does not provide a good fit for Cd²⁺ adsorption data. The effects of solution pH, ionic strength and CNT dosage on the competitive adsorption of Pb²⁺, Cu²⁺ and Cd²⁺ ions were investigated. The comparison of CNTs with other adsorbents suggests that CNTs have great potential applications in environmental protection regardless of their higher cost at present.     

The Extraction Ability and Sensitivity of Porphyrazine Derivatives Towards Some Transition Metal Cations

The synthesis of novel metal-free and magnesium porphyrazines, peripherally substituted with dithia-dioxa (S₂O₂) and tetrathia (S₄) 14-membered macrocycles were performed by cyclotetramerization of (6Z)-1,3,4,9,10,12-hexahydro-2,5,8,11-benzo-dioxadithiacyclotetradecine-6,7-dicarbodinitrile (3) or (6Z)-1,3,4,9,10,12-hexahydro 2,5,8,11-benzotetrathiacyclotetradecine-6,7-dicarbodinitrile (5). The metal-free porphyrazines have been obtained by known route. The structure of compounds were characterized by elemental analysis and ¹H, ¹³C NMR, IR, UV-vis, and MS spectral data. The solvent extraction properties of the synthesized compounds towards some metal cations, such as Ag(I), Hg(II), Cu(II), Mn(II), Cr(III), Ni(II), Pb(II), and Zn(II) have been investigated. The effect of Cu²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Sr²⁺, Al³⁺, Zn²⁺, Ba²⁺, Cd²⁺, Co²⁺, Hg²⁺, and Ag⁺ ions on the absorption spectra of the compounds were investigated by means of spectrophotometric method. Magnesium porphyrazine with S₂O₂ (6) interacted within Hg²⁺ ion specifically of all the tested metal ions.     

Electrochemical studies of the interaction between a modified activated carbon surface and heavy metal ions

Cyclic voltammetric studies of the influence of surface chemistry on the electrochemical behaviour of powdered activated carbon electrodes (PACE) in the presence of selected heavy metal ions (Pb²⁺, Hg²⁺, Cd²⁺) in bulk solution and pre-adsorbed on carbon were carried out. The variety of surfaces was achieved via the modification of carbon samples by heat treatment under vacuum and in an oxygen/ammonia atmosphere, as well as oxidation with conc. nitric acid. The chemical structures of the modified carbon surfaces were characterised by XPS and standard pH-titration. The adsorption capacities of the modified carbon samples towards the heavy metal ions in question were estimated. The mechanisms of adsorption processes of metal species on carbon surfaces were analysed and described on the basis of their electrochemical behaviour. The nature of the interactions between the modified carbon surfaces and adsorbed cations is discussed.     

Chromogenic sensing of Cu(II) by imino linked thiacalix[4]arene in mixed aqueous environment

Thiacalix[4]arene based imino receptors 4–5 carrying azophenol appendage have been synthesized and studied for their binding abilities towards different metal ions (Li⁺, Na⁺, K⁺, Cd²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺ and Hg²⁺). Receptor 4 showed selective chromogenic sensing for Cu²⁺ ions in mixed aqueous conditions (THF:H₂O, 9:1 v/v).