Electrospun nanofibrous membranes for solid-phase extraction of estriol from aqueous solution

Nowadays, efficient, economical, and environmentally friendly materials for the removal of emerging contaminants from the aquatic environment have been sought. Electrospun nanofibrous membranes contain fibers with diameters of submicron or nanometer scale, making them very promising adsorbent materials for use in several areas. In this context, the present study aims to synthesize and apply polymeric nanofiber membranes for solid-phase extraction of estriol from aqueous solution. Nanofiber membranes of poly(ε-caprolactone) (PCL) and polyamide-6 (PA-6) were tested as adsorbent materials and characterized by different techniques. The electrospinning time was evaluated, and the highest removal obtained for the PA-6 nanofiber was 76.5%, spun for 100 min, whereas for the PCL nanofiber, 80% time-independent removal was obtained. The thinner nanofibers had a larger contact area, therefore higher removals, except for the PCL nanofiber, which presented exposed beads on smaller thicknesses that impaired their efficiency. Furthermore, the nanofiber membranes have been applied for the determination of 1.0 mg L⁻¹ of E3 in superficial water sample with satisfactory results. These aspects demonstrate that the synthesized nanofibers present an efficient material for the extraction of estriol: of high simplicity, low cost, and using green chemistry. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47189.     

Characterization of filter media prepared from aligned nanofibers for fine dust screen

Nanofibers for fine dust filters of four structures (random, aligned, orthogonal, and nanofiber net) were prepared by electrospinning method using polymers such as PAN and PA6. While conventional electret filters experienced deterioration problems in fine dust(PM_1.0) capture as its surface charge decayed, the electrospun nanofibers prepared contributed to the removal capacity. The filters from aligned fibers showed high quality factors ( q _F : filter performance indicator) and filtration efficiency from 22 to 50% depending on particle size than simple electret media at a face velocity of 15.92 cm/s. The fiber structure of nanofiber net (NFN) presented almost absolute collection efficiency, particularly on dust particles smaller than 300 nm. Furthermore, the composite filters which are composed both of a commercial electret mask filters and nanofiber nets effectively enhanced the overall filtration efficiency by 59.46%, resulting in more than 99% for PM_1.0. Consequently, electrospun polymer nanofibers offer a promising plausible mask filter material with air permeability. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48166.     

Effects of poly (vinyl alcohol) (PVA) content on preparation of novel thiol-functionalized mesoporous PVA/SiO2 composite nanofiber membranes and their application for adsorption of heavy metal ions from aqueous solution

Thiol-functionalized mesoporous poly (vinyl alcohol)/SiO₂ composite nanofiber membranes and pure PVA nanofiber membranes were synthesized by electrospinning. The results of Fourier transform infrared (FTIR) indicated that the PVA/SiO₂ composite nanofibers were functionalized by mercapto groups via the hydrolysis polycondensation. The surface areas of the PVA/SiO₂ composite nanofiber membranes were >290 m²/g. The surface areas, pore diameters and pore volumes of PVA/SiO₂ composite nanofibers decreased as the PVA content increased. The adsorption capacities of the thiol-functionalized mesoporous PVA/SiO₂ composite nanofiber membranes were greater than the pure PVA nanofiber membranes. The largest adsorption capacity was 489.12 mg/g at 303 K. The mesoporous PVA/SiO₂ composite nanofiber membranes exhibited higher Cu²⁺ ion adsorption capacity than other reported nanofiber membranes. Furthermore, the adsorption capacity of the PVA/SiO₂ composite nanofiber membranes was maintained through six recycling processes. Consequently, these membranes can be promising materials for removing, and recovering, heavy metal ions in water.     

Conducive 3D porous mesh of poly(ε-caprolactone) made via emulsion electrospinning

Use of Poly(ε-caprolactone) (PCL) as 3D porous scaffold, fibers and matrices has proved importance of this polymer in applications for tissue engineering besides others. Here we present an approach to generate uneven surfaced meshes of PCL via emulsion electrospinning with minimal use of organic solvent. Poly(vinyl alcohol) (PVA) was used as template polymer providing stability and alignment to PCL phase during electrospinning of oil-in-water emulsion of PCL. The emulsion properties including particle size, inter-particle distance and viscosity depended on the concentrations of PCL and PVA. Higher PVA content led to formation of smaller oil phase particles resulting into higher viscosity of the emulsion while a higher PCL content led to the formation of larger oil phase particles and correspondingly lower viscosity of the emulsion. A correlation between particle size of emulsion and diameter of the fibers obtained after electrospinning was found. The composite meshes of PCL-PVA obtained via emulsion electrospinning were washed with water to generate uneven surface on the meshes which was found to be highly favorable for cell growth in comparison to a uniform mesh of PCL made via solution electrospinning.     

Ultrasmall Ag nanocrystals supported on chitosan/PVA nanofiber mats with bifunctional properties

Bifunctional nanofiber mats consisting of chitosan (CS), poly(vinyl alcohol) (PVA), and silver nanocrystals (Ag NCs) have been fabricated by a facile electrospinning method. The formation and presence of Ag NCs supported on CS/PVA nanofibers are confirmed by ultraviolet‐visible spectroscopy and X‐ray diffraction. The morphology of the samples is characterized by transmission electron microscopy and scanning electron microscopy. The prepared Ag NCs/CS/PVA nanofiber mats show pronounced antibacterial activity against Escherichia coli and excellent filtration property for suspended particulate matter (SPM) particles. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46504.     

Enhanced Thermal Stability and Electrochemical Performance of Polyacrylonitrile/Cellulose Acetate-Electrospun Fiber Membrane by Boehmite Nanoparticles: Application to High-Performance Lithium-Ion Batteries

In this study, polyacrylonitrile/cellulose acetate (PAN/CA) composite nanofiber membranes with different boehmite contents are prepared by electrospinning. The physical and electrochemical properties of the composite nanofiber membrane as a separator in lithium batteries are investigated. In contrast to commercial polypropylene membrane (PP), the nanocomposite fiber membrane has a 3D network structure, higher porosity, higher thermal stability, higher electrolyte absorptivity, higher ionic conductivity, and better cycling performance. The PAN/CA composite membrane with 12 wt% boehmite has the highest ionic conductivity (1.694 mS cm⁻¹); the specific discharge capacity is 160 mAh g⁻¹ at 0.2 C discharge density and the highest capacity retention rate is 99.3% after 100 cycles. The cycle rate at 2 C has a higher capacity retention rate (88.75%). These results indicate that the PAN/CA/AlOOH composite nanofiber membrane can be expected to replace the commercial polyolefin membrane and behave as a high-performance separator for lithium-ion batteries.     

Palladium nanoparticles embedded chitosan/poly(vinyl alcohol) composite nanofibers as an efficient and stable heterogeneous catalyst for Heck reaction

In this study, palladium nanoparticles were successfully embedded into modified chitosan/poly(vinyl alcohol) composite nanofibers (Pd-CS/PVA nanofibers) by electrospinning. Then, the Pd-CS/PVA nanofibers were treated at evaluated temperature to improve its solvent resistance and in situ reduce Pd²⁺ cations into Pd⁰ active species. The incorporated palladium nanoparticles with ultra small mean diameter of 3.73 ± 1.04 nm are evenly distributed inside the Pd-CS/PVA nanofiber. The resulting Pd-CS/PVA nanofiber mat exhibits high catalytic activity for Heck reaction of aromatic iodides with alkenes and can be recycled for 18 times without loss of initial activity. The high catalytic activity and stability of Pd-CS/PVA nanofiber mat can be attributed to the ultra small diameter nanofibers, strong chelating ability of chitosan, and fine embedment of palladium species inside the nanofiber. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48026.     

Antibacterial Ag containing core-shell polyvinyl alcohol-poly (lactic acid) nanofibers for biomedical applications

Core-shell-structured polyvinyl alcohol (PVA)-poly (lactic acid) (PLA) nanofibers combining the hydrophilic trait of PVA and the biocompatibility of PLA were produced using coaxial electrospinning. This allowed the incorporation of AgNO₃ in the PVA core of the distinct fibers as shown through transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) showed relatively uniform and bead-free fibers with smooth surfaces. Ag-containing fibers show significantly decreased diameters compared with Ag-free samples as a result of the increased conductivity of the spinning solutions with increasing amounts of AgNO₃. In a postsynthetic treatment, the AgNO₃ was reduced forming silver nanoparticles (Ag NPs). Ag NPs of 45 to 90 nm size were located in the PVA core but also on the surface of the core-shell fibers and as individual, agglomerated, and polymer-coated particles of 100-200 nm. Powder X-ray diffraction (PXRD), energy dispersive X-ray spectroscopy (EDX), and UV-vis absorption spectroscopy confirmed the increasing amounts of Ag in the core-shell fibers when using increasing amounts of AgNO₃ in the spinning solutions. The antibacterial activity of the nanofiber mats against two prokaryotes Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) increased with increasing amounts of Ag, as expected and produces inhibition zones of 1 to 2 mm.     

Influence of solvent characteristics in triaxial electrospun fiber formation

Triaxial electrospinning is a novel method for fabrication of multilayered nano and microsize fibers with desirable features for particular applications. Since the effect of solvent volatilities in each layer and relative polymer molecular weights on uniform encapsulation of the core polymer process is not well understood, we evaluated (i) the role of solvent volatilities, and (ii) molecular weights using cellulose acetate (CA, 30 kDa), polycaprolactone (PCL, 45 kDa and 80 kDa), mineral oil, and polyvinyl alcohol (PVA, 30 kDa and 100 kDa). Different solvent mixtures were evaluated based on the boiling points determined using a simulator. Inner mineral oil was selectively removed to form Hollow fibers. Analysis of chemical compositions using FT-IR and DSC revealed the presence of each component. 24-h viability of human umbilical vein endothelial cells indicated the formed fibers were not toxic. Scanning electron micrographs indicated the formation of triaxial structured fiber of outer hydrophobic PCL/CA/Hollow, PCL/PVA/Hollow and outer hydrophilic CA/PCL/Hollow fibers. Tensile tests (both wet and dry) revealed that PCL/CA/Hollow fibers had increased stiffness and load carrying capacity than CA/PCL/Hollow fibers. Successful fiber formation was dependent on ensuring that the outer shell formed first i.e., the relative solvent volatility of encapsulating core polymer to lower than that of the shell polymer.     

Scaling law on particle-to-fiber formation during electrospinning

The development of various morphologies such as beads, beaded fibers, pure fibers and their scaling as a function of solution properties and processing variables in electrospinning is reported. Polyvinyl pyrrolidone (PVP), at various molecular weights and concentrations dissolved in a mixture of water and ethanol, was used to prepare different morphologies and sizes. The morphology of beads and fibers was predicted and measured based on an entanglement number diagram and rheological measurements. A constant-current electrospinning system was employed to control the processing variables. Scaling laws related to solution properties and processing variables (voltage, current and flow rate), and their effect on the fiber/bead diameter, were discussed. Viscosity (η), flow rate (Q), and current (I) were found to play significant roles in the control of morphology during electrospinning. Processing variables involved in electrospinning followed a power scaling that was in agreement with the model. The dependence of fiber diameter (d_f) on the Q/I for different molecular weights and concentrations also followed a power law, and the scaling varied between 0.11-0.29 for beaded fiber and 0.36-0.51 for pure fiber. In addition, the relationship between viscosity and fiber diameter followed scaling laws: d_f ∼ η^0.98.     

High pyroelectric response in Pb0.99Nb0.02[(Zr0.57Sn0.43)1−xTix]0.98O3 ceramics

Both high pyroelectric coefficient and figure of merits of ferroelectric materials are desirable for infrared detection. In this work, we prepared Pb_0.99Nb_0.02[(Zr_0.57Sn_0.43)_1−xTi_x]_0.98O₃ (0.060 ≤ x ≤ 0.080) ceramics, and the microstructure and electric properties were studied systematically. It is observed that the composition x = 0.07 shows enhanced pyroelectric properties around ambient temperature due to the ferroelectric–antiferroelectric phase transition, with the pyroelectric coefficient p = 6.83 × 10⁻⁴ C m⁻² K⁻¹ and the figures of merit F_i = 5.04 × 10⁻¹⁰ m V⁻¹, F_v = 7.61 × 10⁻² m² C⁻¹, and F_d = 3.46 × 10⁻⁵ Pa^−1/2 at room temperature and the highest pyroelectric coefficient of 695.5 × 10⁻⁴ C m⁻² K⁻¹ and F_i = 1410.46 × 10⁻¹⁰ m V⁻¹, F_v = 1587.39 × 10⁻² m² C⁻¹, and F_d = 1182.94 × 10⁻⁵ Pa^−1/2 at 36.7°C. These values are superior to other pyroelectric materials. These results indicate that this system is a promising pyroelectric material for the applications of infrared detectors.     

Influence of lactic acid on degradation and biocompatibility of electrospun poly(ε‐caprolactone) fibers

Electrospinning of a poly(ε‐caprolactone) (PCL)/lactic acid (LA) blend was investigated to fabricate electrospun PCL fibers with improved biodegradability and biocompatibility for biomedical applications. Simple blending of PCL solution with various amounts of LA was used for electrospinning, and the physicochemical properties of the as‐fabricated mat were evaluated using various techniques. Scanning electron microscopy showed that fiber diameter decreased with increasing amount of LA. Fourier transform infrared spectroscopy and thermogravimetric analysis also revealed that LA was successfully incorporated in PCL fibers. The presence of LA can accelerate the biodegradation of PCL fibers and enhance the hydrophilicity of a membrane. The adhesion, viability and proliferation properties of osteoblast cells on the PCL/LA composite fibers were analyzed using in vitro cell compatibility tests which showed that LA can increase the cell compatibility of PCL fibers. Additionally, subsequent conversion of LA into calcium lactate by neutralization with calcium base can provide Ca²⁺ ions on the fiber surface to promote the nucleation of CaPO₄ particles. © 2013 Society of Chemical Industry     

Electrospinning fabrication and characterization of poly(vinyl alcohol)/waterborne polyurethane nanofiber membranes in aqueous solution

Poly(vinyl alcohol) (PVA)/waterborne polyurethane (WBPU) nanofiber mats were prepared using electrospinning method with aqueous solutions. Scanning electron microscopy (SEM), X‐ray diffraction (XRD), thermal gravimetric analyzer (TGA), and tensile strength testing machine (ZWICK) were used to characterize the morphology and properties of the PVA/WBPU nanofiber mats. The results showed that the morphologies of PVA/WBPU nanofiber mats changed with the total solid concentration and the mass ratio of PVA/WBPU in the spinning solution. The tensile strength and thermal stability of the fibers could be significantly affected by the WBPU contents. The electrospun PVA/WBPU membranes showed higher water uptake, which would have potential applications in wound dressings. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Settled/unsettled blend nanofibers electrospun from photoactive polymeric/nonpolymeric constituents in PBDT-DTNT:PCBM solar cells

To increase internal donor–acceptor interfaces and highlight the influence of ordering of donor–acceptor components inside fibers, novel blend fibrous structures comprising unsettled poly[benzodithiophene-bis(decyltetradecyl-thien) naphthothiadiazole] (PBDT-DTNT):grafted-reduced graphene oxide (rGO) nanofibers, settled PBDT-DTNT/grafted-rGO nanofibers including PBDT-DTNT, and settled PBDT-DTNT/grafted-rGO nanofibers excluding PBDT-DTNT were prepared and embedded in photovoltaics. Hence, three-dimensional nonwoven network morphologies of triple electrospun fibers were acquired using electrospinning. Average diameter and conductivity of PBDT-DTNT:grafted-rGO, PBDT-DTNT/grafted-rGO:PBDT-DTNT, and PBDT-DTNT/grafted-rGO fibers ranged in 200–250 and 1.1–1.6 × 10⁻⁹ S cm⁻¹, 150–190 and 9.2–9.5 × 10⁻⁷ S cm⁻¹, and 60–80 nm and 3.3–3.7 × 10⁻¹⁰ S cm⁻¹, respectively. Photoluminescence quenching and thus donating–accepting characteristic of settled PBDT-DTNT/grafted-rGO nanofibers including PBDT-DTNT were more intensified, resulting from greater internal interfaces. Through blending PBDT-DTNT/grafted-rGO supramolecules with PBDT-DTNT chains and embedding them in PBDT-DTNT:phenyl-C71-butyric acid methyl ester (PC71BM) thin films, the best results were obtained. Short-circuit current density (J_sc), open circuit voltage (V_oc), fill factor (FF), and power conversion efficiency (PCE) were 12.18 mA cm⁻², 0.66 V, 65%, and 5.22%, respectively. Nanofiber template not only acted as guide path for charge transport but also increased interfacial area between donor and acceptor to induce more exciton dissociation. Inclusion of PBDT-DTNT donor chains into blend nanofibers increased donor–acceptor interface in organic filaments. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47591.     

A thin film composite membrane supported by a hydrophilic poly(vinyl alcohol‐co‐ethylene) nanofiber membrane: Preparation,characterization, and application in nanofiltration

In this study, a fabricated hydrophilic poly(vinyl alcohol‐co‐ethylene) (PVA‐co‐PE) nanofiber membrane was used as the middle support layer to prepare thin film composite (TFC) membranes for nanofiltration. The effects of the supporting nonwoven layer, grams per square meter (GSM) of nanofiber, reaction time, heat treatment, monomer concentration, operating pressure, and pH value on the separation performance of the TFC membranes were analyzed. These results show that the TFC membranes prepared with the PVA‐co‐PE nanofiber membrane can be used to filtrate different metal ions. For NaCl, Na₂SO₄, CaCl₂, CuCl₂, CuSO₄, and methyl orange solutions, the rejection rates of the TFC membrane with nonwoven polyester as the supporting layer and a nanofiber GSM of 12.8 g/m² are 87.9%, 93.4%, 92.0%, 93.1%, 95.8%, and 100%, respectively. This indicates the potential application of the PVA‐co‐PE nanofiber membrane in the preparation of nanofiltration and reverse‐osmosis TFC membranes. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46261.     

Electrospinning of polycaprolactone nanofibers using H2O as benign additive in polycaprolactone/glacial acetic acid solution

Considerable efforts have been devoted to the production of polycaprolactone (PCL) nanofibrous structures by electrospinning. However, some toxic solvents have often been used to achieve bead‐free nanofibers. At present, a benign solvent such as glacial acetic acid (GAC) only leads to beaded or microscale fibers. Therefore a study is done to extend the electrospinnability of the PCL/GAC system by the addition of H₂O. The solution properties of conductivity, viscosity, and surface tension were altered by the addition of H₂O, especially increasing the conductivity and viscosity. These properties essential to electrospinning could remain stable for 6 h when the H₂O content was less than or equal to 9 vol %. Then ultrafine PCL fibers with diameters from 188 to 200 nm, 10 times smaller than when dissolved in pure GAC, were electrospun from solutions of PCL with concentrations in the range of 17 to 20 wt % with H₂O content at 9 vol %. Finally, the crystallinity and crystallite size of the resulting fibers were smaller than that of raw PCL pellets. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45578.     

ITO electrode modified by self-assembling multilayer film of polyoxometallate on poly(vinyl alcohol) nanofibers and its electrocatalytic behavior

Poly(vinyl alcohol) (PVA) nanofiber mats were collected on indium tin oxide (ITO) substrate by electrospinning method. A multilayer film composed of α-[P₂W₁₈O₆₂]⁶⁻ (abbr. P₂W₁₈), a polyoxometallate (POM) anion, and poly(diallymethylammonium chloride) (abbr. PDDA) was fabricated by layer-by-layer (LBL) self-assembly technique on the PVA/ITO electrode. The PDDA/P₂W₁₈ multilayer film could be unselectively or selectively deposited on the PVA/ITO electrode via changing the amount of PVA nanofibers on the ITO substrate. The scanning electron microscope (SEM) images showed that when the electrospun time was short the PDDA/P₂W₁₈ multilayer film was unselectively deposited on PVA nanofiber mats because the amount of PVA nanofibers was too little to cover most of the ITO substrate. However, when the electrospun time was long enough, the PDDA/P₂W₁₈ multilayer film was selectively deposited on PVA nanofiber mats because of the larger surface area and higher surface energy of PVA nanofibers in comparison with the flat ITO substrate. Growth process of the multilayer film was determined by cyclic voltammetry (CV). Electrocatalytic effects of the PDDA/P₂W₁₈ multilayer film unselectively and selectively deposited on the PVA/ITO electrode on NO₂⁻ were observed.     

Synthesis of (Z)‐3‐hexen‐1‐yl acetate by lipase immobilized in polyvinyl alcohol nanofibers

Polyvinyl alcohol (PVA)‐nanofibers‐immobilized lipase were formed by electrospinning. The specific surface area of the nanofiber (5.96 m²/g) was about 250 times larger than that of PVA‐film‐immobilized lipase (0.024 m²/g). The PVA‐nanofibers‐immobilized lipase were used as the catalyst for the esterification of (Z)‐3‐hexen‐1‐ol (leaf alcohol) with acetic acid in hexane. The activity of the nanofiber is equivalent to that of commercially available immobilized lipase (Novozym‐435). The ester conversions of the nanofibers, Novozym‐435, the film and lipase powder reached 99.5% at 5 h, 100% at 5 h, 11.5% at 6 h, and 81.1% at 5.75 h, respectively. The nanofibers‐immobilized lipase showed higher activity for the esterification than the film‐immobilized lipase and lipase powder, probably because it has high specific surface area and high dispersion state of lipase molecules in PVA matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Achieving single domain in rhombohedral and tetragonal Mn-doped Pb(In1/2Nb1/2)-Pb(Mg1/3Nb2/3)-PbTiO3 crystals for infrared detecting applications

The [111]-oriented rhombohedral Mn-doped 0.15Pb(In_1/2Nb_1/2)-0.55Pb(Mg_1/3Nb_2/3)O₃-0.30PbTiO₃ (Mn:PIMNT(15/55/30)) crystal and the [001]-oriented tetragonal Mn-doped 0.29Pb(In_1/2Nb_1/2)-0.29Pb(Mg_1/3Nb_2/3)O₃-0.42PbTiO₃ (Mn:PIMNT(29/29/42)) crystal were poled under different conditions. The pyroelectric performance of the two crystals as a function of poling temperature, as well as the relationship with ferroelectric domain configuration and phase structure was investigated systematically. The pyroelectric properties of the two crystals enhance with rising the poling temperature, which can be attributed to the improvement of the single state. And for the rhombohedral Mn:PIMNT(15/55/30) crystal locating near morphotropic phase boundary (MPB), the increase of tetragonal phase induces the deterioration of pyroelectric properties. Due to more residual tetragonal phase, the pyroelectric coefficient of the Mn:PIMNT(15/55/30) crystal poled at 150°C is lower than that poled at 100°C. In general, both the crystals poled above T_C achieve nearly single state, exhibiting the best pyroelectric properties with relatively high Curie temperature (T_C), where P = 9.71 × 10⁻⁴ C m⁻² K⁻¹, F_i = 3.88 × 10⁻¹⁰ m V⁻¹, F_v = 0.068 m² C⁻¹ and F_d = 29.7 × 10⁻⁵ Pa^−1/2 for the rhombohedral Mn:PIMNT(15/55/30) crystal (T_C = 171°C) and P = 6.78 × 10⁻⁴ C m⁻² K⁻¹, F_i = 2.71 ×10⁻¹⁰ mV⁻¹, F_v = 0.1 m² C⁻¹, F_d = 23.54 × 10⁻⁵ Pa^−1/2 for the tetragonal Mn:PIMNT(29/29/42) single crystal (T_C = 251°C), meeting the stable operation of infrared detector at relatively high environmental temperatures.     

Cocontinuous cellulose acetate/polyurethane composite nanofiber fabricated through electrospinning

Cocontinuous cellulose acetate (CA)/polyurethane (PU) composite nanofibers were obtained through electrospinning of partially miscible CA and PU in 2:1 N,N‐dimethylacetamide (DMAc)/acetone mixture solvent. Their structures, mechanical, and thermal properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The structures and morphologies of the nanofibers were affected by component ratio in the binary mixtures. PU component not only facilitated the electrospinning of CA at CA concentration down to 12 wt%, but reinforced the tensile strength of CA/PU nanofibrous mats, while semirigid component CA in the composite nanofibers could greatly improve the rigidity and dimensional stability of CA/PU nanofibrous mats. In a series of nanofibrous mats with varied CA/PU composition ratios, CA/PU 20/80 showed excellent tensile strength and Young's modulus. The residual product after selective removal of any one of the components in CA/PU composite nanofibers by washing with proper solvent maintained the fiber structure but greatly reduced the fiber size, suggesting CA/PU composite fibers showed a cocontinuous nanofiber structure due to phase separation in the spinning solution and in the course of electrospinning. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers