Structural,optical, and spectroscopic properties of Er3+-doped TeO2–ZnO–ZnF2 glass-ceramics

Transparent fluorotellurite glass-ceramics have been obtained by heat treatment of precursor Er-doped TeO₂–ZnO–ZnF₂ glasses. ErF₃ nanocrystals nucleated in the glass-ceramics have a typical size of 45 ± 10 nm. Based on the Judd-Ofelt theory, the main radiative parameters for the ⁴I_13/2 → ⁴I_15/2 transition have been obtained. The split of the absorption and emission bands and the reduction of the Ω₂ parameter, as compared to the glass, confirm the presence of Er³⁺ ions in a crystalline environment in glass-ceramic samples. The analysis of the ⁴I_13/2 decays suggests that a fraction of Er³⁺ ions remains in a glass environment while the rest forms nanocrystals. For the glass-ceramics, intense red and green upconversion emissions were observed with an enhancement of the ⁴F_9/2 → ⁴I_15/2 red one compared to the glass sample. The temporal evolution of the red emission together with the excitation upconversion spectra suggests that energy transfer processes are responsible for the enhancement of the red emission.     

Luminescent properties of rare earth (Er,Yb) doped yttrium aluminium garnet thin films and bulk samples synthesised by an aqueous sol–gel technique

Yttrium aluminium garnet (YAG) powders and thin films deposited on silicon substrates were prepared by an aqueous sol–gel route using metal nitrates. The sol–gel process resulted in an amorphous gel, and the thermal decomposition and successive crystallization were characterized by thermal analysis and X-ray diffraction. Powders were prepared by heat treatment of the amorphous gel, while crack-free thin films of densely packed nano-crystalline particles were obtained on silicon substrates by dip-coating technique. Photoluminescence (PL) properties as well as up-conversion (anti-stoke emission) of Er, Yb co-doped YAG phosphors were investigated. Green (555 nm) and red (650 nm) photoluminescence up-conversion emissions arising due to ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 transitions, respectively for Er³⁺ ion were observed. Photoluminescence and radiative life-times of the exited states of Er³⁺ in the visible and near IR ranges are also reported.     

Zn-Er heterometallic carboxylate framework based on 3,5-pyrazoledicarboxylic acid with nested sandwich structure and its luminescent property

A three-dimensional 3d-4f heterometallic coordination polymer, {[Er₂Zn(Hpdc)₄(H₂O)₈]·2H₂O}_n (1)(H₃pdc = 3,5-pyrazoledicarboxylic acid), was hydrothermally synthesized and characterized by techniques of single crystal X-ray diffraction, infrared spectra (IR), thermogravimetric analysis(TGA), elemental analysis, powder X-ray diffraction(PXRD), and luminescent measurements. X-ray crystal structure analyses reveal that complex 1 shows a 3D heterometallic framework with nested sandwich-type structure, built by the 2D Er-Hpdc networks, [Zn(Hpdc)₂(H₂O)₂] units, and hydrogen bonds. In addition, the solid-state luminescent property investigation shows that emission lifetime span of the complex was at the microsecond level in the visible region, which is classified as a phosphorescent material. Moreover, when excited at 375 nm, the complex exhibits the characteristic emission ⁴I_13/2 → ⁴I_15/2 of Er(III) at 1514 nm.     

Preparation of IGZO sputtering target and its applications to thin-film transistor devices

Nano-scale In₂O₃, Ga₂O₃ and ZnO powder mixture prepared by a hybrid process of chemical dispersion and mechanical grinding was adopted for the In–Ga–Zn–O (IGZO) sputtering target fabrication. A pressure-less sintering at 1300 °C for 6 h yielded the target containing sole InGaZnO₄ phase with relative density as high as 93%. Consequently, the thin-film transistor (TFT) devices containing amorphous IGZO channels were prepared by using the self-prepared target and the electrical measurements indicated the TFT subjected to a post annealing at 300 °C exhibits the best device performance with the saturation mobility = 14.7 cm²/V s, threshold voltage = 0.57 V, subthreshold gate swing = 0.45 V/decade and on/off ratio = 10⁸. Capacitance–voltage measurement indicated that post annealing effectively suppresses the interfacial traps density at the IGZO/SiO₂ interface and thus enhances the electrical performance of TFT.     

Near-infrared luminescent properties and natural lifetime calculation of a novel Er3+ complex

In this communication, a novel Er³⁺ complex Er(PT)₃TPPO [PT = 1-phenyl-3-methyl-4-tert-butylbenzoyl-5-pyrazolone, TPPO = triphenyl phosphine oxide] is successfully synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. Its optical properties and the energy transfer process from the ligand PT to the Er³⁺ ion are investigated, the typical near-infrared (NIR) luminescence (centered at around 1530 nm) is attributed to the ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺ ion which results from the efficient energy transfer from PT to Er³⁺ ion (an antenna effect). The wider full width at half maximum (78 nm) peaked at 1530 nm in the emission spectrum and the Judd–Ofelt theory calculation on the radiative properties suggest that Er(PT)₃TPPO should be a promising candidate for tunable lasers and planar optical amplifiers.     

Transport properties of sealants for high-temperature electrochemical applications: RO–BaO–SiO2 (R = Mg,Zn) glass–ceramics

The electrical properties and oxygen permeability of glass–ceramics 55SiO₂–27BaO–18MgO, 55SiO₂–27BaO–18ZnO and 50SiO₂–30BaO–20ZnO (%mol), which possess thermal expansion compatible with that of yttria-stabilized zirconia (YSZ) solid electrolytes, were studied between 600 and 950 °C in various atmospheres. The ion transference numbers, determined by the modified electromotive force (e.m.f.) technique under oxygen partial pressure gradients of 21 kPa/(1–8) × 10² Pa and 21 kPa/(1 × 10⁻¹⁸–2 × 10⁻¹²) Pa, are close to unity both under oxidizing and reducing conditions. The electronic contribution to the total conductivity increases slightly on increasing temperature, but is lower than 2% and 7% for the Zn- and Mg-containing compositions, respectively. The conductivity values measured by impedance spectroscopy vary in the range (1.4–7.8) × 10⁻⁶ S/cm at 950 °C under both oxidizing and reducing conditions, with activation energies of 122–154 kJ/mol and a minor increase in H₂-containing atmospheres, indicating possible proton intercalation. In agreement with the electrical measurements which indicate rather insulating properties of the glass–ceramics, the oxygen permeation fluxes through sintered sealants and through sealed YSZ/glass–ceramics/YSZ cells are very low, in spite of an increase of 15–40% during 200–230 h under a gradient of air/H₂–H₂O–N₂ due to slow microstructural changes.     

Gd-based oxyfluoride glass ceramics: Phase transformation,optical spectroscopy and upconverting temperature sensing

A series of precursor glasses with compositions of SiO₂-Al₂O₃-AlF₃-Na₂O- NaF-Gd₂O₃/GdF₃-YbF₃-ErF₃ were prepared and their crystallization behaviors were investigated. For the samples with high F content, meta-stable hexagonal GdF₃ nanocrystals were preferentially precipitated from glass matrix and decreasing F/O ratio induced phase transformation to cubic NaGdF₄ and finally to hexagonal NaGdF₄. Benefited from its multiple active sites, significant enhanced upconversion luminescence was achieved for Yb/Er co-doped glass ceramic containing hexagonal NaGdF₄ nanocrystals. Importantly, significant temperature-sensitive upconversion fluorescence intensity ratio between Er³⁺: ²H_11/2 → ⁴I_15/2 transition (520 nm) and ⁴S_3/2 → ⁴I_15/2 one (540 nm) was detected owing to the competitive radiation transitions from these two thermally coupled emitting-states. Furthermore, linear temperature-dependent fluorescence intensity ratio between Er³⁺: ⁴F_9/2 → ⁴I_15/2 transition (650 nm) to ⁴S_3/2 → ⁴I_15/2 one (540 nm) was achieved, showing the advantages of high sensitivity, superior signal discriminability as well as excellent thermal stability for temperature determination.     

Graphene quantum dots directly generated from graphite via magnetron sputtering and the application in thin-film transistors

This work presents a novel method to prepare graphene quantum dots (GQDs) directly from graphite. A composite film of GQDs and ZnO was first prepared using the composite target of graphite and ZnO via magnetron sputtering, followed with hydrochloric acid treatment and dialysis. Morphology and optical properties of the GQDs were investigated using a number of techniques. The as-prepared GQDs are 4–12 nm in size and 1–2 nm in thickness. They also exhibited typical excitation-dependent properties as expected in carbon-based quantum dots. To demonstrate the potential applications of GQDs in electronic devices, pure ZnO and GQD–ZnO thin-film transistors (TFTs) using ZrO_x dielectric were fabricated and examined. The ZnO TFT incorporating the GQDs exhibited enhanced performance: an on/off current ratio of 1.7 × 10⁷, a field-effect mobility of 17.7 cm²/Vs, a subthreshold swing voltage of 90 mV/decade. This paper provides an efficient, reproducible and eco-friendly approach for the preparation of monodisperse GQDs directly from graphite. Our results suggest that GQDs fabricated using magnetron sputtering method may envision promising applications in electronic devices.     

Efficient near-infrared to visible and ultraviolet upconversion in polycrystalline BiOCl:Er3+/Yb3+ synthesized at low temperature

Er³⁺/Yb³⁺ co-doped BiOCl poly-crystals were synthesized by the conventional solid state method at 500 °C, which exhibited good crystalline and low phonon energy. Under 980 nm excitation, the samples showed intense red upconversion (UC) luminescence (Er³⁺: ⁴F_9/2→⁴I_15/2) as well as other four UC emission bands, including ultraviolet (UV) emission at 380 nm, violet emission at 411 nm, green UC emissions at 525 and 545 nm and near-infrared (NIR) emission between 800 and 850 nm, corresponding to the transitions of ⁴G_11/2, ²H_9/2, ²H_11/2, ⁴S_3/2 and ⁴I_9/2→⁴I_15/2 of Er³⁺, respectively. Interestingly, including the violet and green UC emissions, the red one originated a nearly three-photon process in this system, and a possible UC mechanism was proposed for the enhanced red emission.     

Infrared luminescence in Er3+:Yb3Al5O12 bulk ceramics prepared by sol–gel method

Erbium doped and pure ytterbium aluminium garnet (YbAG, Yb₃Al₅O₁₂) bulk ceramics were successfully prepared by a chelating sol–gel route based on the polyesterification of ethylenediaminetetraacetic acid (EDTA) with triethanolamine (TEA). The gel decomposition and phase formation in precursor powders were studied using XRD and TG/DTA. Amorphous precursor was directly converted to YbAG phase after calcinations at 800 °C. The influence of intermediate grinding on microstructure and luminescent properties was investigated. The discrete luminescence bands of the ⁴I_13/2 → ⁴I_15/2 transition were observed in the infrared emission spectra of erbium doped samples. The lifetime of luminescence at 1530 nm was 2.82 ms and 1.82 ms for the doped samples. This may be attributed to the different efficiency of surface recombination channel, caused by different grain size distribution. Prepared samples are suitable as a standard for photoluminescence measuring of Er-doped YbAG thin films.     

Structural analysis and electronic properties of a homodinuclear erbium(III) complex bridged by the polyazine ligand 2,2′-bipyrimidine

Structural analysis of the previously reported homodinuclear complex [Er(tfa)₃]₂bpm (where tfa = 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione and bpm = 2,2′-bipyrimidine) synthesized by reaction of two equivalents of ErCl₃ with six equivalents of tfa and one equivalent of bpm in a basic ethanol solution is presented. X-ray quality crystals were grown by slow evaporation of concentrated methanol solution containing the complex. The complex crystallizes in the monoclinic space group P2₁/n, with a planar bpm ligand. The erbium…erbium distance is 6.715(5) Å. Each erbium center is eight coordinate from six tfa oxygens and two bpm nitrogens. Electronic transitions of concentrated solutions of the complex reveal three sharp lines corresponding to the 4f–4f1 transitions at 486 nm, 520 nm and 657 nm with the lowest energy transition corresponding to ⁴I_15/2 → ⁴F_9/2.     

1.53 µm luminescence properties of Er3+-doped K–Sr–Al phosphate glasses

Trivalent erbium (Er³⁺)-doped K–Sr–Al phosphate glasses were prepared and studied their spectroscopic properties as a function of Er₂O₃ concentration. Judd–Ofelt analysis has been carried out for 1.0 mol% Er₂O₃-doped phosphate glass and in turn radiative properties have been evaluated for the excited levels of Er³⁺ ion. The radiative lifetime for the ⁴I_13/2 level was found to be higher for the present glass when compared to other Er³⁺-doped glasses. The Er³⁺-doped glasses exhibit intense near infrared emission at 1.53 µm corresponds to ⁴I_13/2→⁴I_15/2 transition as well as green emission at 546 nm corresponding to ⁴S_3/2→⁴I_15/2 under 980 nm and 488 nm excitations, respectively. The emission cross-section spectrum for 1.0 mol% of Er₂O₃-doped glass has been evaluated using McCumber theory. The gain cross-section has been evaluated as a function of population inversion, which revealed that the lasing action would be achieved at 1.53 µm for a population inversion about 40%. Decay curves for the ⁴I_13/2 level were measured and lifetimes have been determined for the studied glasses. The results indicate that the present glasses could be useful for laser as well as optical amplifiers at 1.53 µm.     

A new molybdate host material: Synthesis,upconversion, temperature quenching and sensing properties

A new upconversion (UC) host material YbMoO₄ with 0–100 mol% Er³⁺ doping was obtained using a facile coprecipitation method. A pure tetragonal phase of YbMoO₄ was synthesized, which was dependent on the pH value of the reaction mixture and the sintering temperature. The existence of pentavalent molybdenum was confirmed in YbMoO₄ by thermal-reduction of hexavalent molybdenum. Under a 976 nm laser diode excitation, both green and red UC emissions were observed from Er³⁺:YbMoO₄, which corresponded to the ²H_11/2/⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺ with the strongest luminescence appearing at a mole ratio of Er:Yb=1:10. The two-photon absorption UC process was responsible for the green and red emissions. The temperature-dependent green UC emission of Er³⁺:YbMoO₄ was observed, which was rationalized using the thermal quenching model. The fluorescence intensity ratio (FIR) of green UC emissions was studied as a function of temperature and its high thermal sensitivity implied that the Er³⁺:YbMoO₄ material is a promising prototype for applications in optical temperature sensing.     

Improving the electrical properties of niobium-doped titania sputtering targets by sintering in oxygen-deficient atmospheres

Niobium-doped titania (TNO) film can be used as a transparent conductive oxide (TCO) film due to its excellent conductivity and visible transparency. The performances of TNO sputtering targets are thus critical issues in optimizing sputtered films. This study clarifies the influences of inert and reducing atmospheres on the microstructure, densification, crystal structure, and electrical properties of TNO sputtering targets. The results indicate that a sintering atmosphere of 90% Ar–10% H₂ can result in a lower sintered density, larger grain size, and lower resistivity than can an atmosphere of Ar, followed by one of air. Sintering in 90% Ar–10% H₂ or Ar obviously decreases the resistivity of TiO₂, from >10⁸ Ω cm to <10⁻¹ Ω cm, and the TNO target, from >10¹ Ω cm to <10⁻¹ Ω cm. The resistivity of TNO target sintered at 1200 °C in 90% Ar–10% H₂ is as low as 1.8×10⁻² Ω cm.     

Near-infrared (NIR) luminescent PMMA-based hybrid materials doped with Ln-β-diketonate (Ln = Nd or Yb) complexes

Based on [Ln(L)₃(H₂O)₂] (Ln = Nd, Yb or Er) complexes self-assembled from a trifluorinated acylpyrazole-type β-diketonate ligand HL ((Z)-3-methyl-1-phenyl-4-(2,2,2-trifluoro-1-hydroxyethylidene)-1H-pyrazol-5(4H)-one) and LnCl₃·6H₂O, a series of NIR luminescent PMMA-supported hybrid materials PMMA@[Ln(L)₃(H₂O)₂] are obtained from physical doping. The immobilization of the luminescent species via physical and chemical interactions within the polymeric PMMA matrix also acting as co-sensitizer, endows the enhanced NIR luminescent properties (Φ_em = 0.85–0.97%) in comparison to the individual Ln^3 +-β-diketonate complex (Φ_em = 0.53–0.79%) besides the improved thermal-stability properties.     

The effect of annealing on electrical properties of fluorinated amorphous carbon films

Fluorinated amorphous carbon (a–C:F) films have been deposited by electron cyclotron resonance chemical vapor deposition (ECR–CVD) at room temperature using C₄F₈ and CH₄ as precursor gases. The chemical compositions and electrical properties of a–C:F films have been studied by X-ray photoelectron spectroscopy (XPS), capacitance–voltage (C–V) and current-voltage (I–V) measurements. The results show that C–CF_x and C–C species of a–C:F films increase and fluorine content decreases after annealing. The dielectric constant of the annealed a–C:F films increases as a result of enhancement of film density and reduction of electronic polarization. The densities of fixed charges and interface states decrease from 1.6 × 10¹⁰ cm^− 2 and (5–9) × 10¹¹ eV^− 1 cm^− 2 to 3.2 × 10⁹ cm^− 2 and (4–6) × 10¹¹ eV^− 1 cm^− 2 respectively when a–C:F films are annealed at 300 °C. The magnitude of C–V hysteresis decreases due to reduced dangling bonds at the a–C:F/Si interfaces after heat treatment. The conduction of a–C:F films shows ohmic behavior at lower electric fields and is explained by Poole–Frankel (PF) mechanism at higher electric fields. The PF current increases indicative of reduced trap energy when a–C:F films are subjected to higher annealing temperatures.     

3D pillar-layered 4d–4f heterometallic coordination polymers based on pyridine-3,5-dicaboxylate and oxalate mixed ligands

Three 4d–4f heterometallic polymers, Ln₂Ag₂(Hpydc)₂(pydc)₂(ox) · 4H₂O (Ln = Nd (1), Eu (2) and Er (3); H₂Pydc = pyridine-3,5-dicarboxylic acid, H₂ox = oxalic acid), have been successfully synthesized under hydrothermal condition and structurally characterized. Single-crystal X-ray diffraction analyses reveal that three compounds are isomorphous and exhibit 3D pillar-layered coordination frameworks constructed from two-dimensional lanthanide-carboxylate layers and [Ag(pydc)]^? pillars. Furthermore, the luminescent property of compound 2 was studied.     

Schottky barrier effect of ZnO modified methyl glycol thin films for detection of hydrogen sulfide gas

Highly nanocrystalline ZnO modified methyl glycol thin films have been deposited on a p-type silicon substrate via the sol–gel spin coating manner. The morphology of the as-deposited film was scrutinized using scanning electron microscopy. I–V characteristics of the as-prepared ZnO film under vacuum and in open air were monitored. The results showed that the ZnO films have a barrier height of 0.38 eV under vacuum and 0.62 eV in open air. The Schottky barrier height between ZnO grains was determined for different reducing gases. The ZnO film showed high sensitivity to H₂S gas compared with other reducing gases due to the reduction of barrier height between ZnO grains. The as-prepared ZnO film was annealed at four different temperatures. X-ray diffraction manifested that the wurtzite hexagonal structure of ZnO deviated from ideality at annealing temperature greater than 650 °C. The barrier height of ZnO film decreased due to the increase of annealing temperature up to 650 °C and then decreased. The results also confirmed that the change of barrier height strongly affected the sensitivity of ZnO film.     

Luminescent Er3+ doped transparent alumina ceramics

We report on successful preparation of Er³⁺ doped transparent alumina (0.1–0.17 at.%) exhibiting visible light photoluminescence using wet shaping method and hot isostatic pressing. The effects of dopant amount, type of doping powder and powder pre-treatment on final microstructure, real in-line transmittance and photoluminescence characteristics were studied.The real in-line transmittance ranged between 28 and 56%, depending on processing parameters. The transparency decreased with increased amount of dopant. The decrease is dependent on the type of doping powder and its pre-treatment.The photoluminescence spectra measured in both visible and NIR region showed typical emission bands due to the presence of Er³⁺ ions. The decay profiles of the ⁴S_3/2 → ⁴I_15/2 transition were fitted with a 2-exponential function, with faster component in the range of 360–700 ns and slower component around 1.6-2.4 μs. The intensity of emissions and lifetime of the ⁴S_3/2 level decrease significantly with increasing concentration of Er³⁺ ions.     

Photoluminescence mechanism of annealed ZnO/Zn/Al2O3 sandwich structures deposited on glass substrates

ZnO/Zn/Al₂O₃ sandwich structures are grown on glass substrates by magnetron sputtering. The effect of Al₂O₃ layers on optical properties of ZnO/Zn/Al₂O₃ sandwich structures is investigated. Results indicated that as the deposition time of Al₂O₃ increases, violet peak centered at 402 nm gradually shifted to 412 nm and the intensity firstly decreases and then increases. We discuss the intensity change and shift of violet peak relating to V_Zn defects and the band alignment of ZnO/Zn/Al₂O₃ sandwich structures, respectively. We proposed that ZnO/Zn/Al₂O₃ sandwich structures can be approximately regarded as a quasiquantum-well-like structure. So the electron tunneling from Zn to Al₂O₃ layer is suppressed and the photogenerated carriers can be confined in the Zn Fermi level. In order to further understand the effect of posttreatment on optical properties of samples, samples are annealed in vacuum at 350 °C for 1 h. PL emissions are weakened with the increase of Al₂O₃ deposition time. Interestingly, at a same deposition condition, PL emissions are still improved after posttreatment. Combined Al₂O₃ layer modulation with annealing treatment, steady PL properties can be effectively improved.