Immobilization of malto‐oligosaccharide forming α‐amylase from Bacillus subtilis KCC103: properties and application in starch hydrolysis

BACKGROUND: A malto‐oligosaccharide forming α‐amylase from Bacillus subtilis KCC103 immobilized in calcium alginate beads was repeatedly used in batch processes of starch hydrolysis. The degree of starch degradation and operational stability of the immobilized system were optimized by varying the physical characteristics and composition of the beads. The products formed from hydrolysis of various starches by α‐amylase immobilized in different supports were analyzed. RESULTS: Immobilized beads prepared from 3% (w/v) alginate and 4% (w/v) CaCl₂ were suitable for up to 10 repeated uses, losing only 25% of their efficiency. On addition of 1% silica gel to alginate prior to gelation, the operational stability of the immobilized enzyme was enhanced to 20 cycles of operation, retaining > 90% of the initial efficiency. Distribution of malto‐oligosaccharides in the starch hydrolyzate depended on the type of starch, reaction time and mode of immobilization. Soluble starch and potato starch formed a wide range of malto‐oligosaccharides (G1–G5). Starches from wheat, rice and corn formed a narrow range of smaller oligosaccharides (G1–G3) as the major products. CONCLUSION: The immobilized beads of α‐amylase from KCC103 prepared from alginate plus silica gel showed high efficiency and operational stability for hydrolysis of starch. This immobilized system is useful for production of malto‐oligosaccharides applied in the food and pharmaceutical industries. Since this KCC103 amylase can be produced at low cost utilizing agro‐residues in a short time and immobilized enzyme can be recycled, the overall cost of malto‐oligosaccharide production would be economical for industrial application. Copyright © 2008 Society of Chemical Industry     

N‐Alkyl‐, 1‐C‐Alkyl‐, and 5‐C‐Alkyl‐1,5‐dideoxy‐1,5‐imino‐(l)‐ribitols as Galactosidase Inhibitors

A series of 1,5‐dideoxy‐1,5‐imino‐(l )‐ribitol (DIR) derivatives carrying alkyl or functionalized alkyl groups were prepared and investigated as glycosidase inhibitors. These compounds were designed as simplified 4‐epi‐isofagomine (4‐epi‐IFG) mimics and were expected to behave as selective inhibitors of β‐galactosidases. All compounds were indeed found to be highly selective for β‐galactosidases versus α‐glycosidases, as they generally did not inhibit coffee bean α‐galactosidase or other α‐glycosidases. Some compounds were also found to be inhibitors of almond β‐glucosidase. The N‐alkyl DIR derivatives were only modest inhibitors of bovine β‐galactosidase, with IC₅₀ values in the 30–700 μm range. Likewise, imino‐l ‐ribitol substituted at the C1 position was found to be a weak inhibitor of this enzyme. In contrast, alkyl substitution at C5 resulted in enhanced β‐galactosidase inhibitory activity by a factor of up to 1000, with at least six carbon atoms in the alkyl substituent. Remarkably, the ‘pseudo‐anomeric’ configuration in this series does not appear to play a role. Human lysosomal β‐galactosidase from leukocyte lysate was, however, poorly inhibited by all iminoribitol derivatives tested (IC₅₀ values in the 100 μm range), while 4‐epi‐IFG was a good inhibitor of this enzyme. Two compounds were evaluated as pharmacological chaperones for a GM1‐gangliosidosis cell line (R301Q mutation) and were found to enhance the mutant enzyme activity by factors up to 2.7‐fold.     

Gold Catalysis: β‐Ketonaphthalenes via Molecular Gymnastics of 1,6‐Diyne‐4‐en‐3‐ols

1,6‐Diyne‐4‐en‐3‐ols with one terminal alkyne were applied as test substrates for a possible dual catalyzed cyclization. Instead of a dual catalysis cycle, naphthyl ketone derivatives were obtained as single products. The regioselectivity of the obtained products is unprecedented. Instead of the expected naphthyl ketones bearing the keto group in the α‐position, the keto group is positioned in the ß‐position of the naphthyl skeleton by a complex rearrangement of the starting materials.     

Cyclopropanation of Strained Alkenes by Palladium‐Catalyzed Reaction of 3‐Trimethylsilyl‐ or 3‐Pinacolatoboryl‐1‐arylallyl Acetates

The palladium‐catalyzed cyclopropanation of strained alkenes with 3‐trimethylsilyl‐ or 3‐pinacolatoboryl‐1‐arylallyl acetate derivatives is described. This reaction gives cyclopropanation products in good to high yields with a single diastereomer, and the key step is likely to involve the formation of a palladacyclobutene complex from the α‐trimethylsilyl‐ or α‐pinacolatoboryl‐σ‐allylpalladium complex.     

Chiral N,N′‐Dioxide–Yttrium Triflate Complexes‐Catalyzed Asymmetric Aldol Cyclization of α‐Keto Esters with α‐Isothiocyanato Imide

A highly effective aldol cyclization of α‐isothiocyanato imide to both β,γ‐unsaturated α‐keto esters and aryl‐substituted α‐keto esters has been developed. A chiral N,N′‐dioxide–yttrium triflate complex was used as the catalyst. A series of cyclic thiocarbamates bearing chiral quaternary stereocenters was synthesized in good to high yields, excellent diastereo‐ (up to 25:1 dr) and enantioselectivities (up to 99 % ee). In addition, the reaction could be carried out on a gram‐scale, and other functionalized derivatives are also conveniently transformed. Interestingly, a discrepancy of diastereoselection was observed between the reactions of β,γ‐unsaturated α‐keto esters and aryl‐substituted α‐keto esters. Moreover, a substrate dependency of non‐linear effects was observed in this reaction. On the basis of the experimental results and the absolute configuration of the products, possible catalytic models have been proposed to explain the origin of the asymmetric process.

     

CGTase‐Catalysed cis‐Glucosylation of L‐Rhamnosides for the Preparation of Shigella flexneri 2a and 3a Haptens

We report the enzymatic synthesis of α‐D ‐glucopyranosyl‐(1→4)‐α‐L ‐rhamnopyranoside and α‐D ‐glucopyranosyl‐(1→3)‐α‐L ‐rhamnopyranoside by using a wild‐type transglucosidase in combination with glucoamylase and glucose oxidase. It was shown that Bacillus circulans 251 cyclodextrin glucanotransferase (CGTase, EC 2.1.4.19) can efficiently couple an α‐L ‐rhamnosyl acceptor to a maltodextrin molecule with an α‐(1→4) linkage, albeit in mixture with the α‐(1→3) regioisomer, thus giving two glucosylated acceptors in a single reaction. Optimisation of the CGTase coupling reaction with β‐cyclodextrin as the donor substrate and methyl or allyl α‐L ‐rhamnopyranoside as acceptors resulted in good conversion yields (42–70 %) with adjustable glycosylation regioselectivity. Moreover, the efficient chemical conversion of the products of CGTase‐mediated cis‐glucosylation into protected building blocks (previously used in the synthesis of O‐antigen fragments of several Shigella flexneri serotypes) was substantiated. These novel chemoenzymatic strategies towards useful, convenient intermediates in the synthesis of S. flexneri serotypes 2a and 3a oligosaccharides might find applications in developments towards synthetic carbohydrate‐based vaccine candidates against bacillary dysentery.     

Creating a Water‐Soluble Resveratrol‐Based Antioxidant by Site‐Selective Enzymatic Glucosylation

The phytochemical resveratrol (trans‐3,5,4′‐trihydroxystilbene) has drawn great interest as health‐promoting food ingredient and potential therapeutic agent. However, resveratrol shows vanishingly low water solubility; this limits its uptake and complicates the development of effective therapeutic forms. Glycosylation should be useful to enhance resveratrol solubility, with the caveat that unselective attachment of sugars could destroy the molecule's antioxidant activity. UGT71A15 (a uridine 5′‐diphosphate α‐D ‐glucose‐dependent glucosyltransferase from apple) was used to synthesize resveratrol 3,5‐β‐D ‐diglucoside; this was about 1700‐fold more water‐soluble than the unglucosylated molecule (～0.18 mM ), yet retained most of the antioxidant activity. Resveratrol 3‐β‐D ‐glucoside, which is the naturally abundant form of resveratrol, was a practical substrate for perfect site‐selective conversion into the target diglucoside in quantitative yield (g L^?1 concentration).     

Effective biosynthesis of poly(3‐hydoxy‐ butyrate‐co‐4‐hydroxybutyrate) with high 4‐hydroxybutyrate fractions by Wautersia eutropha in the presence of α‐amino acids

BACKGROUND: Biopolymers produced by microbes are in demand as their biodegradable and biocompatible properties make them suitable for disposable products and for potential use as biomaterials for medical applications. The effective microbial production of copolyesters of 3‐hydroxybutyrate (3HB) and 4‐hydroxybutyrate(4HB) with high molar fractions of 4HB unit by a wild‐type Wautersia eutropha H16 was investigated in culture media containing 4‐hydroxybutyric acid (4HBA) and different carbon substrates in the presence of various α‐amino acids. RESULTS: The addition of carbon sources such as glucose, fructose and acetic acid to the culture medium containing 4HBA in the presence of α‐amino acids resulted in the production of random poly(3HB‐co‐4HB) with compositions of up to 77 mol% 4HB unit, but the yields of copolyesters with 60–77 mol% 4HB units were less than 15 wt% of dried cell weights. In contrast, when carbon sources such as propionic acid and butyric acid were used as the co‐substrates of 4HBA in the presence of α‐amino acids, poly(3HB‐co‐4HB) copolyesters with compositions of 72–86 mol% 4HB were produced at maximally 47.2 wt% of dried cell weight (11.3 g L^?1) and the molar conversion yield of 4HBA to 4HB fraction in copolyesters was as high as 31.4 mol%. Further, poly(3HB‐co‐4HB) copolyesters with compositions of 93–96 mol% 4HB were isolated at up to 35.2 wt% of dried cell weights by fractionation of the above copolymers with chloroform/n‐hexane. CONCLUSION: The productivity of copolyesters with over 80 mol% 4HB fractions was as high as 0.146 g L^?1 h^?1 (3.51 g L^?1 for 24 h) by flask batch cultivation. Copyright © 2007 Society of Chemical Industry     

Enantioselective Construction of Cyclic Indolyl α‐Amino Esters via a Friedel–Crafts Alkylation Reaction

An enantioselective Friedel–Crafts alkylation reaction of indoles with cyclic N‐sulfonyl ketimino esters was developed. Under the optimized conditions using a chiral copper(II) triflate‐bisoxazoline complex as the catalyst, a range of N‐sulfonyl ketimino ester derivatives and indoles reacted smoothly to afford indole‐containing chiral cyclic α‐amino esters bearing tetrasubstituted α‐stereogenic centers [3‐ethoxycarbonyl‐3‐(3‐indolyl)‐2,3‐dihydrobenzo[d]isothiazole 1,1‐dioxides] in excellent yields and with high enantioselectivities (up to 99% ee). Pyrrole and N,N‐dimethylaniline were also investigated as aromatic substrates to afford the corresponding products with good results. An asymmetric induction model was then proposed on the basis of the observed absolute configuration of the product 3‐ethoxycarbonyl‐3‐(5‐bromo‐3‐indolyl)‐2,3‐dihydrobenzo[d]isothiazole 1,1‐dioxide. Synthetic transformations to convert the products into cyclic chiral N‐sulfonamido alcohols and the deprotection of the sulfonamides were performed. This study provides an efficient approach to chiral α‐tetrasubstituted indolic α‐amino acids as potential building blocks for peptides and biologically active molecules.

     

Influence of α′‐/α‐crystal polymorphism on properties of poly(l‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a biodegradable and biocompatible thermoplastic polyester produced from renewable sources, widely used for biomedical devices, in food packaging and in agriculture. It is a semicrystalline polymer, and as such its properties are strongly affected by the developed semicrystalline morphology. As a function of the crystallization temperature, PLLA can form different crystal modifications, namely α′‐crystals below about 120 °C and α‐crystals at higher temperatures. The α′ modification is therefore of special importance as it may be the preferred polymorph developing at processing‐relevant conditions. It is a metastable modification which typically transforms into the more stable α‐crystals on annealing at elevated temperature. The structure, kinetics of formation and thermodynamics of α′‐ and α‐crystals of PLLA are reviewed in this contribution, together with the effect of α′‐/α‐crystal polymorphism on the properties of PLLA. © 2018 Society of Chemical Industry     

N,N′‐Dioxide‐Magnesium Ditriflate Complex‐Catalyzed Asymmetric α‐Hydroxylation of β‐Keto Esters and β‐Keto Amides

The highly catalytic asymmetric α‐hydroxylation of 1‐tetralone‐derived β‐keto esters and β‐keto amides using tert‐butyl hydroperoxide (TBHP) as the oxidant was realized by a chiral N,N′‐dioxide‐magnesium ditriflate [Mg(OTf)₂] complex. A series of corresponding chiral α‐hydroxy dicarbonyl compounds was obtained in excellent yields (up to 99%) with excellent enantioselectivities (up to 98% ee). The products were easily transformed into useful building blocks and the precursor of daunomycin was achieved in an asymmetric catalytic way for the first time.     

Inhibitory Effect of 8‐Halogenated 7‐Deaza‐2′‐deoxyguanosine Triphosphates on Human 8‐Oxo‐2′‐deoxyguanosine Triphosphatase,hMTH1, Activities

hMTH1 (8‐oxo‐2′‐deoxyguanine triphosphatase) hydrolyzes oxidized nucleoside triphosphates; its presence is non‐essential for survival of normal cells but is required for survival of cancer cells. In this study, 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine triphosphate (8‐halogenated‐7‐deazadGTP) derivatives were synthesized. Interestingly, these triphosphates were poor substrates for hMTH1, but exhibited strong competitive inhibition against hMTH1 at nanomolar levels. This inhibitory effect is attributed to slower rate of hydrolysis, possibly arising from enzyme structural changes, specifically different stacking interactions with 8‐halogenated‐7‐deazadGTP. This is the first example of using nucleotide derivatives to inhibit hMTH1, thus demonstrating their potential as antitumor agents.     

Stereo‐Controlled Asymmetric Bioreduction of α,β‐Dehydroamino Acid Derivatives

α,β‐Dehydroamino acid derivatives proved to be a novel substrate class for ene‐reductases from the ‘old yellow enzyme’ (OYE) family. Whereas N‐acylamino substituents were tolerated in the α‐position, β‐analogues were generally unreactive. For aspartic acid derivatives, the stereochemical outcome of the bioreduction using OYE3 could be controlled by variation of the N‐acyl protective group to furnish the corresponding (S)‐ or (R)‐amino acid derivatives. This switch of stereopreference was explained by a change in the substrate binding, by exchange of the activating ester group, which was proven by ²H‐labelling experiments.     

Synthesis and Cytostatic and Antiviral Activities of 2′‐Deoxy‐2′,2′‐difluororibo‐ and 2′‐Deoxy‐2′‐fluororibonucleosides Derived from 7‐(Het)aryl‐7‐deazaadenines

A series of sugar‐modified derivatives of cytostatic 7‐heteroaryl‐7‐deazaadenosines (2′‐deoxy‐2′‐fluororibo‐ and 2′‐deoxy‐2′,2′‐difluororibonucleosides) bearing an aryl or heteroaryl group at position 7 was prepared and screened for biological activity. The difluororibonucleosides were prepared by non‐ stereoselective glycosidation of 6‐chloro‐7‐deazapurine with benzoyl‐protected 2‐deoxy‐2,2‐difluoro‐D ‐erythro‐pentofuranosyl‐1‐mesylate, followed by amination and aqueous Suzuki cross‐couplings with (het)arylboronic acids. The fluororibo derivatives were prepared by aqueous palladium‐catalyzed cross‐coupling reactions of the corresponding 7‐iodo‐7‐deazaadenine 2′‐deoxy‐2′‐fluororibonucleoside 20 with (het)arylboronic acids. The key intermediate 20 was prepared by a six‐step sequence from the corresponding arabinonucleoside by selective protection of 3′‐ and 5′‐hydroxy groups with acid‐labile groups, followed by stereoselective S_N2 fluorination and deprotection. Some of the title nucleosides and 7‐iodo‐7‐deazaadenine intermediates showed micromolar cytostatic or anti‐HCV activity. The most active were 7‐iodo and 7‐ethynyl derivatives. The corresponding 2′‐deoxy‐2′,2′‐difluororibonucleoside 5′‐O‐triphosphates were found to be good substrates for bacterial DNA polymerases, but are inhibitors of human polymerase α.     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.     

Enantioselective Cyanosilylation of Ketones with Amino Acid/BINAP/Ruthenium(II)‐Lithium Phenoxide Catalyst Systems

Enantioselective reactions of simple ketones, α,α‐ and β,β‐dialkoxy ketones, and α‐alkoxy ketones with trimethylsilyl cyanide catalyzed by the bimetallic systems of amino acid/BINAP/ruthenium(II) complexes and lithium phenoxide have been studied [BINAP=2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl]. The Ru(PhGly)₂(BINAP)‐lithium phenoxide system showed high enantioselectivity for the reaction of acetophenone derivatives to afford the cyanated products in up to 90% ee [PhGly=phenylglycinate]. For the cyanosilylation of dialkoxy ketones and α‐alkoxy ketones, the Ru(t‐Leu)₂(BINAP)‐lithium phenoxide system exhibited the best catalyst performance to produce the cyanohydrin derivatives in up to 99% ee and 98% ee, respectively [t‐Leu=tert‐leucinate]. The excellent catalytic activity resulted in complete conversion in the reaction with a substrate‐to‐catalyst molar ratio (S/C) of 10,000 in the best cases.     

Asymmetric Organocatalytic Cascade Michael/Hemiketalization/Retro‐Aldol Reaction of 2‐[(E)‐2‐Nitrovinyl]phenols with 2,4‐Dioxo‐4‐arylbutanoates: A Convenient Access to Chiral α‐Keto Esters

An unprecedented organocatalytic enantioselective cascade Michael/hemiketalization/retro‐aldol reaction of 2‐[(E)‐2‐nitrovinyl]phenols and 2,4‐dioxo‐4‐arylbutanoates is described. With a bifunctional squaramide catalyst incorporating (1R,2R)‐1,2‐diphenylethane‐1,2‐diamine, the reactions afford products in 75–99% yields with 80–98% ee. This process provides an enantioselective pathway for the synthesis of chiral α‐keto esters, precursors of 3‐arylproline derivatives, δ‐amino α‐keto acids or cyclic α‐keto lactams.

     

Advanced Mutasynthesis Studies on the Natural α‐Pyrone Antibiotic Myxopyronin from Myxococcus fulvus

Myxopyronin is a natural α‐pyrone antibiotic from the soil bacterium Myxococcus fulvus Mx f50. Myxopyronin inhibits bacterial RNA polymerase (RNAP) by binding to a part of the enzyme not targeted by the clinically used rifamycins. This mode of action makes myxopyronins promising molecules for the development of novel broad‐spectrum antibacterials. We describe the derivatization of myxopyronins by an advanced mutasynthesis approach as a first step towards this goal. Site‐directed mutagenesis of the biosynthetic machinery was used to block myxopyronin biosynthesis at different stages. The resulting mutants were fed with diverse precursors that mimic the biosynthetic intermediates to restore production. Mutasynthon incorporation and production of novel myxopyronin derivatives were analyzed by HPLC‐MS/MS. This work sets the stage for accessing numerous myxopyronin derivatives, thus significantly expanding the chemical space of f α‐pyrone antibiotics.     

α‐Bis and α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polymers by atom transfer radical polymerization using 1,1‐bis[(4‐dimethylamino)phenyl]ethylene as tertiary diamine initiator precursor and functionalizing agent

The quantitative syntheses of α‐bis and α,ω‐tetrakis tertiary diamine functionalized polymers by atom transfer radical polymerization (ATRP) methods are described. A tertiary diamine functionalized 1,1‐diphenylethylene derivative, 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1), was evaluated as a unimolecular tertiary diamine functionalized initiator precursor as well as a functionalizing agent in ATRP reactions. The ATRP of styrene, initiated by a new tertiary diamine functionalized initiator adduct (2), affords the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3). The tertiary diamine functionalized initiator adduct (2) was prepared in situ by the reaction of (1‐bromoethyl)benzene with 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) in the presence of a copper (I) bromide/2,2′‐bipyridyl catalyst system. The ATRP of styrene proceeded via a controlled free radical polymerization process to afford quantitative yields of the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene derivative (3) with predictable number‐average molecular weight (M_n) and narrow molecular weight distribution (M_w/M_n) in a high initiator efficiency reaction. The polymerization process was monitored by gas chromatography analysis. Quantitative yields of α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polystyrene (4) were obtained by a new post ATRP chain end modification reaction of α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3) with excess 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1). The tertiary diamine functionalized initiator precursor 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) and the different tertiary amine functionalized polymers were characterized by chromatography, spectroscopy and non‐aqueous titration measurements. Copyright © 2012 Society of Chemical Industry     

Optimization of growth medium for the production of α‐amylase from Bacillus amyloliquefaciens using response surface methodology

The optimization of nutrient levels for the production of α‐amylase by Bacillus amyloliquefaciens was carried out using response surface methodology (RSM) based on the 2³ factorial central composite design (CCD). This procedure limited the number of actual experiments performed while allowing for possible interactions between three components. RSM was adopted to derive a statistical model for the effect of starch, peptone and yeast extract (YE) on α‐amylase production. The P‐value of the coefficient for linear effects of starch and YE concentration was <0.0001, suggesting that this was the principal experimental variable, having the greatest effect on the production of α‐amylase. The optimal combinations of media constituents for maximum α‐amylase production were determined as 12.61 g L^?1 starch, 2.83 g L^?1 peptone and 1.25 g L^?1 YE. The optimization of the medium resulted not only in a 34% higher enzyme activity than unoptimized medium but also in a reduced amount of the required medium constituents. Copyright © 2006 Society of Chemical Industry