Grafting studies onto cellulose by atom‐transfer radical polymerization

Styrene (Sty), methyl methacrylate (MMA), methacrylamide (MAm) and acrylomorpholine (AcM) were grafted onto powder cellulose by atom‐transfer radical polymerization. Cellulose chloroacetate (Cell‐ClAc), as a macro‐initiator, was first prepared by the reaction of chloroacetyl chloride with primary alcoholic OH groups on powder cellulose. CuBr and 1,2‐dipiperidinoethane were used as a transition‐metal compound and as a ligand, respectively. These reactions were monitored by FT‐IR and weight increase in Cell‐ClAc. In case of styrene, although some weight increase occurred, no evidence of grafting could be observed in the FT‐IR spectrum, while there were strong evidence of grafting with MMA, MAm and AcM. Cell‐graft‐MAm, Cell‐graft‐AcM and Cell‐graft‐MMA showed new carbonyl bands at 1665, 1640 and 1735 cm^?1, respectively. Dye‐uptake and dye‐absorption properties of cellulose, for alizarin yellow (basic dye) and bromocresol green (acidic dye), and its moisture‐ and water‐uptake capacities improved with the grafting, but some decrease was observed in thermal stability. Copyright © 2004 Society of Chemical Industry     

Atom transfer radical polymerization of styrene using a copper catalyst with a pseudohalogen anion

Atom transfer radical polymerization has been a very useful method in the recent advances in controlled radical polymerization. It needs an activated alkyl halide as an initiator and a copper halide as a catalyst. This investigation reports the successful application of copper thiocyanate, a catalyst with a pseudohalide anion, in the presence of different ligands such as N,N,N=,N″,N?,N?‐hexamethyltriethylenetetramine (HMTETA), pentyl‐2‐pyridylmethaneimine, and substituted bipyridine in the atom transfer radical polymerization of styrene. Among the three ligands used, HMTETA was found to be very efficient. The polymers were characterized with ¹³C‐NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and gel permeation chromatography analysis. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1418–1426, 2005     

An iron‐based reverse ATRP process for the living radical polymerization of acrylonitrile

A hexa‐substituted ethane thermal iniferter, diethyl‐2,3‐dicyano‐2,3‐di(p‐tolyl) succinate (DCDTS), was firstly used as the initiator in the reverse atom transfer radical polymerization (RATRP) of acrylonitrile. FeCl₃ coordinated by isophthalic acid (IA) was used as the catalyst in this system. The polymerization in N,N‐dimethylformamide not only shows the best control of molecular weight and its distribution but also provides rather rapid reaction rate with the ratio of [AN] : [DCDTS] : [FeCl₃] : [IA] at 500 : 1 : 2 : 4. The polymers obtained were end‐functionalized by chlorine atom, and they were used as macroinitiators to proceed the chain extension polymerization in the presence of FeCl₂/IA catalyst system via a conventional ATRP process and polyacrylonitrile obtained was with M_n = 39,260, PDI = 1.25. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Kinetics of atom transfer radical polymerization of crosslinkable terpolymer P(MMA‐BA‐HEMA)

A crosslinkable terpolymer P(MMA‐BA‐HEMA) was prepared by atom transfer radical copolymerization of 2‐hydroxyethyl methacrylate, methyl methacrylate and butyl acrylate. The structure of the terpolymer was characterized by ¹H NMR and gel permeation chromatography. The effects on the polymerization of ligand, initiator, solvent, CuCl₂ added in the initial stage and reaction temperature were investigated. The optimal reaction conditions were ethyl 2‐bromopropionate as initiator, CuCl/PMDETA as catalyst, cyclohexanone as solvent, catalyst/ligand = 1:1.5, [M]₀:[I]₀ = 200:1 and temperature 70 °C. The reaction followed first‐order kinetics with respect to monomer concentration, indicating the best control over the polymerization process, a constant concentration of the propagating radical during the polymerization, efficient control over M_n of the polymer and low polydispersity (M_w/M_n < 1.3). © 2013 Society of Chemical Industry     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Atom transfer radical polymerization of acrylonitrile

Iron(II) chloride coordinated by succinic acid was first used as the catalyst in 2‐chloropropionitrile‐initiated atom transfer radical polymerization (ATRP) of acrylonitrile. N,N‐dimethylformamide was used as a solvent to improve the solubility of the ligand. An iron(II) chloride to succinic acid ratio of 0.5 not only gives the best control of molecular weight and its distribution but also provides rather rapid reaction rate. Effects of solvent on polymerization of acrylonitrile were also investigated. The induction period is shorter in N,N‐dimethylformamide than in propylene carbonate and toluene and the rate of the polymerization in N,N‐dimethylformamide is fastest. The molecular weight of polyacrylonitrile agrees reasonably well with the theoretical molecular weight of N,N‐dimethylformamide. The rate of polymerization increases and the induction period becomes shorter with increasing polymerization temperature, and the apparent activation energy was calculated to be 56.5 kJ mol^?1. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1050–1054, 2006     

A new synthetic approach to asymmetric amphiphilic ABA′ block copolymers by ATRP and click reactions

Well‐defined asymmetric amphiphilic ABA′ block copolymers composed of poly(ethylene oxide) monomethylene ether (MPEO) with different molecular weights as A or A′ block and poly(styrene) (PS) as B block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. First, bromine‐terminated diblock copolymer poly(ethylene oxide) monomethylene ether‐block‐poly(styrene) (MPEO‐PS‐Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO‐Br, which was prepared from the esterification of MPEO and 2‐bromoisobutyryl bromide. Then, the azido‐terminated diblock copolymers MPEO‐PS‐N₃ were prepared through the bromine substitution reaction with sodium azide. Propargyl‐terminated MPEO with a different molecular weight was prepared under the basic condition from propargyl alcohol and p‐toluenesulfonyl‐terminated MPEO, which was prepared through the esterification of MPEO and p‐toluenesulfochloride using pyridine as solvent. Asymmetric amphiphilic ABA′ block copolymers, with a wide range of number–average molecular weights from 1.92 × 10⁴ to 2.47 × 10⁴ and a narrow polydispersity from 1.03 to 1.05, were synthesized via a click reaction of the azido‐terminated diblock copolymers and the propargyl‐terminated MPEO in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABA′ block copolymers and corresponding precursors were characterized by NMR, IR, and GPC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly[(decanoic acid)‐block‐styrene] diblock copolymers and their self‐assembly behavior in aqueous medium

Diblock copolymers, poly[(10‐hydroxydecanoic acid)‐block‐styrene] (PHDA‐b‐PSt), were synthesized by combining enzymatic condensation polymerization of HDA and atom transfer radical polymerization (ATRP) as of St PHDA was first obtained via enzymatic condensation polymerization catalyzed by Novozyme‐435. Subsequently, one terminus of the PHDA chains was modified by reaction with α‐bromopropionyl bromide and the other terminus was protected by chlorotrimethylsilane. The resulting monofunctional macroinitiator was used subsequently in ATRP of St using CuCl/2,2′‐bipyridine as the catalyst system to afford diblock copolymers including biodegradable PHDA blocks and well‐defined PSt blocks. Polymeric nanospheres were prepared by self‐assembly of the PHDA‐b‐PSt diblock copolymers in aqueous medium. Copyright © 2008 Society of Chemical Industry     

Novel comb‐structured‐polymer‐grafted carbon black by surface‐initiated atom transfer radical polymerization and ring‐opening polymerization

Novel comb‐structured‐polymer‐grafted carbon black (CB) was synthesized with a combination of surface‐initiated atom transfer radical polymerization and ring‐opening polymerization. First, poly(2‐hydroxyethyl methacrylate) (PHEMA) was grafted onto the CB surface by surface‐initiated atom transfer radical polymerization. The prepared CB‐g‐PHEMA contained 35.6–71.8% PHEMA, with the percentage depending on the molar ratio of the reagents and the reaction temperature. Then, with PHEMA in CB‐g‐PHEMA as the macroinitiator, poly(?‐caprolactone) (PCL) was grown from the CB‐g‐PHEMA surface by ring‐opening polymerization in the presence of stannous octoate. CB‐g‐PHEMA and CB‐g‐(PHEMA‐g‐PCL) were characterized with Fourier transform infrared, ¹H‐NMR, thermogravimetric analysis, dynamic light scattering, and transmission electron microscopy. The resultant grafted CB had a shell of PHEMA‐g‐PCL. On the whole, the CB nanoparticles were oriented in dendritic lamellae formed by these shells. This hopefully will result in applications in gas sensor materials and nanoparticle patterns. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Reverse atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system

Reverse atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) was conducted in an aqueous dispersed system. The influence of the surfactant, catalyst, reaction time and temperature on the colloidal stability and the control of polymerization was investigated. As a result, using an azo initiator (AIBN), a non‐ionic surfactant (Brij 35) and a hydrophobic ligand (dNbpy) to complex a copper halide, polymers with predetermined molecular weight and low polydispersity were obtained as stable latexes. Copyright © 2004 Society of Chemical Industry     

Synthesis of block copolymers by combination of ATRP and photoiniferter processes

BACKGROUND: Block copolymers of monomers polymerizing by different mechanisms can be prepared by the transformation approach. A wide range of combinations of different polymerization modes has been reported in the literature. In this work, the transformation approach was further extended to the preparation of block copolymers by combining atom transfer radical polymerization (ATRP) and photoiniferter processes. RESULTS: Photoactive morpholine‐4‐dithiocarbamate‐terminated polystyrene (MDC‐PS‐MDC) was prepared by the reaction of dibrominated polystyrene, obtained by ATRP, with morpholine‐4‐dithiocarbamate sodium salt in dimethylformamide. The structure of MDC‐PS‐MDC was confirmed by ¹H NMR and UV‐visible spectral analysis. The ability of MDC‐PS‐MDC to act as a photoiniferter for the block copolymerization of methyl acrylate was examined. The polymerization shows a ‘living’ character at up to 25% conversion and produces well‐defined polymers with molecular weights close to those predicted from theory and relatively narrow polydispersities (M_w/M_n ≈ 1.40). CONCLUSION: It is demonstrated that the end groups of polymers obtained by ATRP can be converted into morpholino‐4‐dithiocarbamate groups which act as photoiniferters. In this way, the desired mechanistic transformation between two controlled free radical polymerization methods can be achieved. Copyright © 2008 Society of Chemical Industry     

Copper‐based reverse ATRP process for the controlled radical polymerization of methyl methacrylate

A series of copper‐based reverse atom transfer radical polymerizations (ATRP) were carried out for methyl methacrylate (MMA) at same conditions (in xylene, at 80°C) using N,N,N′,N′‐teramethylethylendiamine (TMEDA), N,N,N′,N′,N′‐pentamethyldiethylentriamine (PMDETA), 2‐2′‐bipyridine, and 4,4′‐Di(5‐nonyl)‐2,2′‐bipyridine as ligand, respectively. 2,2′‐azobis(isobutyronitrile) (AIBN) was used as initiator. In CuBr₂/bpy system, the polymerization is uncontrolled, because of the poor solubility of CuBr₂/bpy complex in organic phase. But in other three systems, the polymerizations represent controlled. Especially in CuBr₂/dNbpy system, the number‐average molecular weight increases linearly with monomer conversion from 4280 up to 14,700. During the whole polymerization, the polydispersities are quite low (in the range 1.07–1.10). The different results obtained from the four systems are due to the differences of ligands. From the point of molecular structure of ligands, it is very important to analyze deeply the two relations between (1) ligand and complex and (2) complex and polymerization. The different results obtained were discussed based on the steric effect and valence bond theory. The results can help us deep to understand the mechanism of ATRP. The presence of the bromine atoms as end groups of the poly(methyl methacrylate) (PMMA) obtained was determined by ¹H‐NMR spectroscopy. PMMA obtained could be used as macroinitiator to process chain‐extension reaction or block copolymerization reaction via a conventional ATRP process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of polypropylene graft copolymers from a hydroxyl‐groups‐containing polypropylene precursor via atom‐transfer radical polymerization

Isotactic polypropylene graft copolymers, isotactic[polypropylene‐graft‐poly(methyl methacrylate)] (i‐PP‐g‐PMMA) and isotactic[polypropylene‐graft‐polystyrene] (i‐PP‐g‐PS), were prepared by atom‐transfer radical polymerization (ATRP) using a 2‐bromopropionic ester macro‐initiator from functional polypropylene‐containing hydroxyl groups. This kind of functionalized propylene can be obtained by copolymerization of propylene and borane monomer using isospecific MgCl₂‐supported TiCl₄ as catalyst. Both the graft density and the molecular weights of i‐PP‐based graft copolymers were controlled by changing the hydroxyl group contents of functionalized polypropylene and the amount of monomer used in the grafting reaction. The effect of i‐PP‐g‐PS graft copolymer on PP‐PS blends and that of i‐PP‐g‐PMMA graft copolymer on PP‐PMMA blends were studied by scanning electron microscopy. Copyright © 2006 Society of Chemical Industry     

Graft copolymerization of methyl methacrylate from brominated poly(isobutylene‐co‐isoprene) via atom transfer radical polymerization

Commercial brominated poly(isobutylene‐co‐isoprene) (BIIR) rubber has been directly used for the initiation of atom transfer radical polymerization (ATRP) by utilizing the allylic bromine atoms on the macromolecular chains of BIIR. The graft copolymerization of methyl methacrylate (MMA) from the backbone of BIIR which was used as a macroinitiator was carried out in xylene at 85 °C with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalytic complex. The polymerization conditions were optimized by adjusting the catalyst and monomer concentration to reach a higher monomer conversion and meanwhile suppress macroscopic gelation during the polymerization process. This copolymerization followed a first‐order kinetic behavior with respect to the monomer concentration, and the number‐average molecular weight of the grafted poly(methyl methacrylate) (PMMA) increased with reaction time. The resultant BIIR‐graft‐PMMA copolymers showed phase separation morphology as characterized by atomic force microscopy, and the presence of PMMA phase increased the polarity of the BIIR copolymers. This study demonstrated the feasibility of using commercial BIIR polymer directly as a macromolecular initiator for ATRP reactions, which opens more possibilities for BIIR modifications for wider applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43408.     

Synthesis of liquid crystalline–amorphous block copolymers by combination of CFRP and ATRP mechanisms

Block copolymers of liquid crystalline 6‐(4‐cyanobiphenyl‐4′‐oxy) hexyl acrylate (LC6) and styrene (St) were obtained by the combination of two different free‐radical polymerization mechanisms namely conventional free‐radical polymerization (CFRP) and atom transfer radical polymerization (ATRP). In the first part, thermosensitive azo alkyl halide, difunctional initiator (AI), was prepared and then used for CFRP of LC6 monomer. The obtained bromine‐ended difunctional liquid crystalline polymers (PLC6) were used as initiators in ATRP of St, in bulk in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst. In the second part, AI was firstly polymerized by CFRP in the presence of St and then the obtained difunctional bromine ended polystyrenes (PSt) were used as initiators in ATRP of LC6 in diphenyl ether solvent in conjuction with CuBr/PMDETA. The spectral, thermal, and optical measurements confirmed a fully controlled living polymerization, which results in formation of ABA‐type block copolymers with very narrow polydispersities. In both cases, blocks of the different chemical composition were segregated in the solid and melt phases. The mesophase transition temperatures of the liquid crystalline block were found to be very similar to those of the corresponding homopolymers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Urotropine as a highly effective and versatile promoter for atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) is a transition metal complex‐catalyzed controlled/‘living’ radical process. Recently, there has been a lot of interest focused on decreasing the catalyst loading and reducing the cost of post‐polymerization purification for ATRP. In this work, urotropine was found to significantly enhance the ATRP of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St) catalyzed by CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) and CuBr/tris(2‐(dimethylamino)ethylamine) (Me₆TREN). With the addition of 25 times the amount of urotropine relative to CuBr, well‐controlled polymerizations of MA, MMA and St were obtained at catalyst‐to‐initiator ratios of 0.01, 0.05 and 0.05, respectively, producing the corresponding polymers with molecular weights close to theoretical values and low polydispersities. The catalyst concentration could even be reduced to ppm level at a catalyst‐to‐initiator ratio as low as 0.001 in the polymerization of MA. These results indicate that urotropine is a very effective and versatile promoter for both CuBr/PMDETA and CuBr/Me₆TREN. In the presence of urotropine, the catalyst loading could be reduced by as much as 1000 times. As PMDETA is one of the cheapest ATRP ligands, the combination of urotropine with CuBr/PMDETA could substantially reduce the catalyst loading and the cost of post‐polymerization purification at the industrial scale and thus is promising for potential industrial applications. © 2014 Society of Chemical Industry     

A novel route for well‐defined polystyrene‐grafted multiwalled carbon nanotubes via the radical coupling reaction

Multiwalled carbon nanotubes‐graft‐polystyrene (MWNTs‐g‐PS) was synthesized by atom transfer nitroxide radical coupling chemistry. MWNTs with 2,2,6,6‐tetramethylpiperidine‐1‐oxy (MWNTs‐TEMPO) groups was prepared first by esterification of 4‐hydroxy (HO)‐TEMPO and carboxylic acid group on the surface of MWNTs (MWNTs‐COOH); PS with bromide end group (PS‐Br) were then obtained by atom transfer radical polymerization using ethyl 2‐bromoisobutyrate as initiator and CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst. The MWNTs‐TEMPO was mixed with PS‐Br and heated to 90°C in the presence of CuBr/PMDETA to form MWNTs‐g‐PS. The product was characterized by FTIR, NMR, TGA, and TEM. TEM indicates that the MWNTs are enveloped by the polymer molecules. The content of grafted polymers is 46.7% by TGA measurements when the number‐average molecular weight (M_n) of PS‐Br is 10,200 g/mol. The as‐prepared nanocomposites exhibit relatively good dispersibility in solvents such as CH₂Cl₂, THF, and toluene. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Copper Removal in Atom Transfer Radical Polymerization through Electrodeposition

Summary: We describe the removal of copper from atom transfer radical polymerization (ATRP) through electrochemistry. tert‐Butyl methacrylate ATRP initiated by a PEO macroinitiator was run with CuBr complexed by N‐alkyl‐2‐pyridylmethanimine (Schiff base) or 2,2′‐bipyridyl (bpy) as catalyst. Voltammetry experiments using a CuBr/(Schiff base N‐morpholine‐2‐pyridylmethanimine)₂ complex on a Pt electrode shows an oxidation peak of the ligand at 1.2 V permitting the oxidative destruction of the complex and so the elimination of copper. Using a Hg electrode, it is possible to directly reduce these complexes (at ?2.1 V for the morpholine‐2‐pyridylmethanimine, ?2.19 V for the butyl‐2‐pyridylmethanimine, and ?2.25 V for the bpy). This complex reduction, followed by the formation of a copper amalgam, leads to the quantitative removal of copper and proceeds without polymer degradation.

The electrochemical removal of copper from the ATRP reaction.     

Reverse atom transfer radical polymerization of acrylonitrile

FeCl₃ coordinated by succinic acid was used as the catalyst for the first time in azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile (AN). N,N‐dimethylformamide (DMF) was used as a solvent to improve the solubility of the ligand. A FeCl₃ to succinic acid ratio of 0.5 not only gives the best control of molecular weight and its distribution but also provides rather rapid reaction rate. Effects of different solvents on polymerization of AN were also investigated. The rate of the polymerization in DMF is faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agrees reasonably well with the theoretical molecular weight in DMF. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 64.8 kJ mol^?1. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 32–36, 2006