Synthesis and characterization of degradable copoly(trans‐4‐hydroxy‐L‐proline/ϵ‐caprolactone)

The melt polycondensation reaction of N‐protected trans‐4‐hydroxy‐L ‐proline (N‐Z‐Hpr) and ?‐caprolactone (?‐CL) over a wide range of molar fractions in the feed produced new and degradable poly(N‐Z‐Hpr‐co‐?‐CL)s with stannous octoate as a catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 1.5 wt % stannous octoate at 140°C for 24 h. The synthesized copolymers were characterized by IR spectrophotometry, ¹H NMR, differential scanning calorimetry, and Ubbelohde viscometry. The values of the inherent viscosity (η_inh) and glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of N‐Z‐Hpr. With an increase in the trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) feed from 10 to 90 mol %, a decrease in η_inh from 2.47 to 1.05 dL/g, and an increase in T_g from ?48 to 49°C were observed. The in vitro degradation of these poly(N‐CBz‐Hpr‐co‐?‐CL)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3176–3182, 2003     

Untersuchung der CO2‐Absorptionskinetik in wässrigen Lösungen von N,N‐Diethylethanolanmin und N‐Ethylethanolamin

N‐Ethylethanolamine (EEA) and N,N‐diethylethanolamine (DEEA) represent promising alkanolamines for CO₂ removal from gaseous streams, as they can be prepared from renewable resources. In this work, the reaction rate constant for the reaction between CO₂ and EEA and the liquid‐side mass transfer coefficient were determined from the absorption rate measurements in a blend comprising DEEA, EEA and H₂O. A stirred‐cell reactor was applied for the absorption studies, whereas a zwitterion mechanism for EEA and a base‐catalyzed hydration mechanism for DEEA were used to describe the reaction kinetics.     

Iron‐Catalyzed Oxidative Mono‐ and Bis‐Phosphonation of N,N‐Dialkylanilines

The dehydrogenative α‐phosphonation of substituted N,N‐dialkylanilines by dialkyl H‐phosphonates was achieved under mild conditions by using environmentally benign iron(II) chloride as catalyst and tert‐butyl hydroperoxide as oxidant. The reaction proceeded in the presence of electron‐donating (methoxy, methyl, benzyl) and electron‐withdrawing ring‐substitutents (bromo, carbonyl, carboxyl, m‐nitro) in moderate to good yields. The X‐ray crystal structure of N‐(5,5‐dimethyl‐2‐oxo‐2λ⁵‐[1,3,2]dioxaphosphinan‐2‐yl‐methyl)‐N‐methyl‐p‐toluidine was determined. Bis‐(4‐(dimethylamino)phenyl)methane and bis‐4,4′‐(dimethylamino)benzophenone underwent bisphosphonation selectively by respective monophosphonation at the remote dimethylamino groups. Furthermore, the use of excess dialkyl H‐phosphonate and oxidant allowed us to functionalize both methyl groups of N(CH₃)₂ in N,N‐dimethyl‐p‐toluidine and N,N‐dimethylaminomesidine, respectively, to obtain α,α′‐bisphosphonatoamines in high yield.     

Direct Preparation of 7‐Allyl‐ and 7‐Arylindolines

Addition of allyl halides to the organolithium species derived from lithiation of N‐tert‐butoxycarbonylindoline with sec‐butyllithium (sec‐BuLi) and tetramethylethylenediamine (TMEDA) occurs regioselectively by S_N2 allylation. In contrast, the organolithium species can be transmetalated to the mixed zinc cuprate that undergoes regioselective S_N2′ allylations. Transmetalation to the organozinc chloride allows a Negishi‐type cross‐coupling reaction with aryl bromides using palladium catalysis with triphenylphosphine (PPh₃) as ligand. The chemistry was applied to a very short synthesis of 7‐prenylindole and of the alkaloid vasconine.     

Palladium‐Catalyzed N‐Arylation of N,N‐Dialkylhydrazines with Aryl Chlorides

N,N‐Dialkyl‐N′‐arylhydrazines have been prepared usually in high to excellent yields via the reaction of N,N‐dialkylhydrazines with aryl chlorides in the presence of Pd₂(dba)₃, Xphos and NaO‐t‐Bu in dioxane at 120 °C. With ortho‐substituted aryl chlorides best results have been obtained by using 2‐(2′,6′‐dimethoxybiphenyl)dicyclohexylphosphine (ligand d) as the ligand.     

Synthesis and Surface Active Properties of tri[(N‐alkyl‐N‐ethyl‐N‐Sodium carboxymethyl)‐2‐Ammonium bromide ethylene] Amines

Trimeric betaine surfactants tri[(N‐alkyl‐N‐ethyl‐N‐sodium carboxymethyl)‐2‐ammonium bromide ethylene] amines were prepared with raw materials containing tris(2‐aminoethyl) amine, alkyloyl chloride, lithium aluminium hydride, sodium chloroacetate, and bromoethane by alkylation, Hoffman degradation reaction, carboxymethylation and quaternary amination reaction. The chemical structures of the prepared compounds were confirmed by FTIR, ¹H NMR, MS and elemental analysis. With the increasing length of the carbon chain, the values of their critical micelle concentration initially decreased. Surface active properties of these compounds were superior to general carboxylate surfactants C₁₀H₂₁CHN⁺(CH₃)₂COONa. The minimum cross‐sectional area per surfactant molecule (A_min), standard Gibbs free energy adsorption (ΔG_ads) and standard Gibbs free energy micellization (ΔG_mic) are notably influenced by the chain length n, and the trimeric betaine surfactants have greater ability to adsorb at the air/water interface than form micelles in solution. The efficiency of adsorption at the water/air interface (pC₂₀) of these surfactants increased with the increasing length of the alkyl chain. Their foaming properties, wetting ability of a felt chip, and lime‐soap dispersing ability were also investigated.     

Studies on Electrophilic Interaction of 2,3‐Allenols with Electrophilic Halogen Reagents: Selective Synthesis of 2,5‐Dihydrofurans, 3‐Halo‐3‐alkenals,or 2‐Halo‐2‐alkenyl Ketones

The reaction of primary 2,3‐allenols with iodine (I₂) afforded 2,5‐dihydrofurans while that of readily available 1‐aryl or 1‐methyl substituted 2,3‐allenols with bromine (Br₂), N‐bromosuccinimide (NBS), I₂ or N‐iodosuccinimide (NIS) formed the not easily available but synthetically useful 3‐halo‐3‐alkenals and 2‐halo‐2‐alkenyl ketones with good selectivity and yields via a sequential electrophilic interaction of X⁺ with the allene moiety, 1,2‐aryl or 1,2‐proton shift, and H⁺ elimination process.     

Modified carrageenan. 4. Synthesis and swelling behavior of crosslinked κC‐g‐AMPS superabsorbent hydrogel with antisalt and pH‐responsiveness properties

To synthesize a novel biopolymer‐based superabsorbent hydrogel, 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) was grafted onto kappa‐carrageenan (κC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N′,N′‐tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N′‐methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for κC‐g‐AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature, were systematically optimized. The swelling measurements of the hydrogels were conducted in aqueous solutions of LiCl, NaCl, KCl, MgCl₂, CaCl₂, SrCl₂, BaCl₂, and AlCl₃. Due to the high swelling capacity in salt solutions, the hydrogels may be referred to as antisalt superabsorbents. The swelling of superabsorbing hydrogels was measured in solutions with pH ranging 1 to 13. The κC‐g‐AMPS hydrogel exhibited a pH‐responsiveness character so that a swelling–deswelling pulsatile behavior was recorded at pH 2 and 8. The overall activation energy for the graft copolymerization reaction was found to be 14.6 kJ/mol. The swelling kinetics of the hydrogels was preliminarily investigated as well. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 255–263, 2005     

The Catalytic Asymmetric Addition of Diethylzinc to N‐(Diphenylphosphinoyl) Imines Catalyzed by Cu(OTf)2‐Chiral N‐(Binaphthyl‐2‐yl)thiophosphoramide Ligands

Chiral N‐(binaphthyl‐2‐yl)thiophosphoramide L7 [O,O‐diethyl 2′‐(ethylamino)‐1,1′‐binaphthyl‐2‐ylamidothiophosphate] prepared from the reaction of diethyl chlorothiophosphate with (R)‐(+)‐N‐ethyl‐1,1′‐binaphthyl‐2,2′‐diamine was used as a catalytic chiral ligand in the first Cu(OTf)₂‐promoted catalytic asymmetric addition of diethylzinc to N‐(diphenylphosphinoyl) imines in which ~85% ee can be realized.     

Synthesis of α‐Carbolines Starting from 2,3‐Dichloropyridines and Substituted Anilines

9H‐α‐Carbolines have been prepared via consecutive intermolecular Buchwald–Hartwig reaction and Pd‐catalyzed intramolecular direct arylation from commercially available 2,3‐dichloropyridines and substituted anilines. The combination of a high reaction temperature (180 °C) and the use of DBU were found to be crucial for the intramolecular direct arylation reactions of the 3‐chloro‐N‐phenylpyridin‐2‐amines as no reaction was observed at 120 °C and 180 °C using different inorganic and other organic bases. On the other hand, nitrogen‐methylated pyridine analogues of these substrates {N‐[3‐chloro‐1‐methylpyridin‐2(1H)‐ylidene]anilines} do undergo ring closure at 120 °C, with K₃PO₄ as base, affording the respective 1‐methyl‐1H‐α‐carbolines in good yields.     

High Regioselective Diels–‐Alder Reaction of Myrcene with Acrolein Catalyzed by Zinc‐Containing Ionic Liquids

The ambient zinc‐containing ionic liquids, MX‐ZnCl₂, functioning as both Lewis acid catalyst and green solvent, are employed for a high regioselective Diels–Alder reaction of myrcene with acrolein for the first time, where MX is either 1‐butyl‐3‐methylimidazolium chloride (BmimCl), 1‐ethyl‐3‐methylimidazolium bromide (EmimBr), N‐butylpyridinium bromide (BPyBr), or N‐ethylpyridinium bromide (EtPyBr). Compared with the analogous reaction performed over a ZnCl₂ catalyst in the conventional solvent dichloromethane, higher regioselectivity of the ‘para’ cycloadduct and excellent yield were achieved at shorter reaction time in these ionic liquids with optimized molar compositions of MX and ZnCl₂. These moisture‐insensitive ionic liquids can be easily separated from reaction products after simple washing with hexane, allowing their reuse with no obvious loss in activity.     

One‐pot Synthesis of N‐Formyl‐O‐acyl‐ threo‐ and erythro‐DL‐β‐phenylserine Ethyl Esters and their Antiviral Properties

A series of N‐formyl‐O‐acyl‐β‐phenylserine derivatives 1b ‐ 7b were prepared by the interaction of N‐acyl‐b‐phenylserine ethyl esters 1a ‐ 7a with formic acid in presence of 1.5% HF. One‐pot acyl group N → O migration followed N‐formylation under elaborated reaction conditions. The kinetics of the reaction was investigated. The carboxylic acid moiety in the structure of β‐phenylserine had a strong influence on the reproduction of the used test‐viruses. The toxicity and antiviral activity is dependent on the diastereomeric forms of evaluated compounds.     

Copper‐Catalyzed N‐Alkylation of Sulfonamides with Benzylic Alcohols: Catalysis and Mechanistic Studies

The N‐alkylation of sulfonamides with alcohols is efficiently performed in the presence of easily available copper catalysts via hydrogen borrowing methodology. Applying a copper acetate/potassium carbonate system the reaction of sulfonamides and alcohols gave the corresponding secondary amines in excellent yield. In situ HR‐MS analysis indicated that bissulfonylated amines are formed under air atmosphere, which act as self‐stabilizing ligands for the catalytic system. UV‐visible measurements suggest the interaction between the copper centre and the bissulfonylated amine. Reactions of benzyl alcohol‐d₇ with p‐toluenesulfonamide, N‐benzyl‐p‐toluenesulfonamide or N‐benzylidenetoluenesulfonamide revealed that the reaction proceeds via a transfer hydrogenation mechanism and the whole process is micro‐reversible. Competitive reactions of benzyl alcohol and benzyl alcohol‐d₇ with p‐toluenesulfonamide revealed a kinetic isotope effect (kH/kD) of 3.287 (0.192) for the dehydrogenation of benzyl alcohol and 0.611 (0.033) for the hydrogenation of the N‐benzylidene‐p‐toluenesulfonamide intermediate, which suggests that dehydrogenation of the alcohol is the rate‐determining step.     

Bismuth Triflate‐Catalyzed Addition of Allylsilanes to N‐Alkoxycarbonylamino Sulfones: Convenient Access to 3‐Cbz‐Protected Cyclohexenylamines

Bismuth triflate was found to be an efficient catalyst in the Sakurai reaction of allyltrimethylsilanes with N‐alkoxycarbonylamino sulfones. The reaction proceeded smoothly with a low catalyst loading of Bi(OTf)₃⋅4 H₂O (2–5 mol%) to afford the corresponding protected homoallylic amines in very good yields (up to 96%). A sequential allylation reaction followed by ring‐closing metathesis delivers 6–8 membered 3‐Cbz‐protected cycloalkenylamines.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether‐co‐N‐phenylmaleimide] and its miscibility in blends with styrene‐acrylonitrile or poly(vinyl chloride)

The aim of the study was to investigate the synthesis of a copolymer bearing cyclic carbonate and its miscibility with styrene/acrylonitrile copolymer (SAN) or poly(vinyl chloride) (PVC). (2‐Oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether (OVE) as a monomer was synthesized from glycidyl vinyl ether and CO₂ using quaternary ammonium chloride salts as catalysts. The highest reaction rate was observed when tetraoctylammonium chloride (TOAC) was used as a catalyst. Even at the atmospheric pressure of CO₂, the yield of OVE using TOAC was above 80% after 6 h of reaction at 80°C. The copolymer of OVE and N‐phenylmaleimide (NPM) was prepared by radical copolymerization and was characterized by FTIR and ¹H‐NMR spectroscopies and differential scanning calorimetry (DSC). The monomer reactivity ratios were given as r₁ (OVE) = 0.53–0.57 and r₂ (NPM) = 2.23–2.24 in the copolymerization of OVE and NPM. The films of poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were cast from N‐dimethylformamide. An optical clarity test and DSC analysis showed that poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were both miscible over the whole composition range. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1809–1815, 2000     

A Study on CO2 Absorption Kinetics by Aqueous Solutions of N,N‐Diethylethanolamine and N‐Ethylethanolamine

N‐Ethylethanolamine (EEA) and N,N‐diethylethanolamine (DEEA) represent promising candidate alkanolamines for CO₂ removal from gaseous streams, as they can be prepared from renewable resources. In this work, the reaction rate constant for the reaction between CO₂ and EEA was determined from the absorption rate measurements of CO₂ in a blend comprising DEEA, EEA and H₂O. A stirred‐cell reactor with a plane, horizontal gas‐liquid interface was used for the absorption studies. While the DEEA concentration in the formulated solution was varied in the range of 1.5–2.5 kmol/m³, the initial EEA concentration was 0.1 kmol/m³. A zwitterion mechanism for EEA and a base‐catalyzed hydration mechanism for DEEA were used to describe the reaction kinetics. At 303 K, the second‐order reaction rate constant for the CO₂ reaction with EEA was found to be 8041 m³/(kmol s). The liquid‐side mass transfer coefficient was also estimated, and its value (0.004 cm/s) is in line with those typical of stirred‐cell reactors.     

Synthesis, σ Receptor Affinity,and Pharmacological Evaluation of 5‐Phenylsulfanyl‐ and 5‐Benzyl‐Substituted Tetrahydro‐2‐benzazepines

In accordance with a novel strategy for generating the 2‐benzazepine scaffold by connecting C6–C1 and C3–N building blocks, a set of 5‐phenylsulfanyl‐ and 5‐benzyl‐substituted tetrahydro‐2‐benzazepines was synthesized and pharmacologically evaluated. Key steps of the synthesis were the Heck reaction, the Stetter reaction, a reductive cyclization, and the introduction of diverse N substituents at the end of the synthesis. High σ₁ affinity was achieved for 2‐benzazepines with linear or branched alk(en)yl residues containing at least an n‐butyl substructure. The butyl‐ and 4‐fluorobenzyl‐substituted derivatives, (±)‐5‐benzyl‐2‐butyl‐2,3,4,5‐tetrahydro‐1H‐2‐benzazepine ( 19 b ) and (±)‐5‐benzyl‐2‐(4‐fluorobenzyl)‐2,3,4,5‐tetrahydro‐1H‐2‐benzazepine ( 19 m ), show high selectivity over more than 50 other relevant targets, including the σ₂ subtype and various binding sites of the N‐methyl‐D ‐aspartate (NMDA) receptor. In the Irwin screen, 19 b and 19 m showed clean profiles without inducing considerable side effects. Compounds 19 b and 19 m did not reveal significant analgesic and cognition‐enhancing activity. Compound 19 m did not have any antidepressant‐like effects in mice.     

GluN2B‐Selective N‐Methyl‐d‐aspartate (NMDA) Receptor Antagonists Derived from 3‐Benzazepines: Synthesis and Pharmacological Evaluation of Benzo[7]annulen‐7‐amines

Given their high neuroprotective potential, ligands that block GluN2B‐containing N‐methyl‐D ‐aspartate (NMDA) receptors by interacting with the ifenprodil binding site located on the GluN2B subunit are of great interest for the treatment of various neuronal disorders. In this study, a novel class of GluN2B‐selective NMDA receptor antagonists with the benzo[7]annulene scaffold was prepared and pharmacologically evaluated. The key intermediate, N‐(2‐methoxy‐5‐oxo‐6,7,8,9‐tetrahydro‐5H‐benzo[7]annulen‐7‐yl)acetamide ( 11 ), was obtained by cyclization of 3‐acetamido‐5‐(3‐methoxyphenyl)pentanoic acid ( 10 b ). The final reaction steps comprise hydrolysis of the amide, reduction of the ketone, and reductive alkylation, leading to cis‐ and trans‐configured 7‐(ω‐phenylalkylamino)benzo[7]annulen‐5‐ols. High GluN2B affinity was observed with cis‐configured γ‐amino alcohols substituted with a 3‐phenylpropyl moiety at the amino group. Removal of the benzylic hydroxy moiety led to the most potent GluN2B antagonists of this series: 2‐methoxy‐N‐(3‐phenylpropyl)‐6,7,8,9‐tetrahydro‐5H‐benzo[7]annulen‐7‐amine ( 20 a , K_i=10 nM ) and 2‐methoxy‐N‐methyl‐N‐(3‐phenylpropyl)‐6,7,8,9‐tetrahydro‐5H‐benzo[7]annulen‐7‐amine ( 23 a , K_i=7.9 nM ). The selectivity over related receptors (phencyclidine binding site of the NMDA receptor, σ₁ and σ₂ receptors) was recorded. In a functional assay measuring the cytoprotective activity of the benzo[7]annulenamines, all tested compounds showed potent NMDA receptor antagonistic activity. Cytotoxicity induced via GluN2A subunit‐containing NMDA receptors was not inhibited by the new ligands.     

Stereoselective Cascade Reactions of Donor–Acceptor Cyclopropanes with m‐N,N‐Dialkylaminophenyl α,β‐Unsaturated Carbonyls: Diastereoselective Synthesis of cis‐ and trans‐Tetralins

The ytterbium(III) triflate [Yb(OTf)₃]‐catalyzed diastereoselective cascade reaction of m‐N,N‐dimethylaminophenyl α,β‐unsaturated carbonyls with cyclopropane 1,1‐diesters under mild reaction conditions afforded highly substituted cis‐ and trans‐tetralins. The reaction of m‐N,N‐dimethylaminophenyl α,β‐unsaturated ketones with cyclopropane 1,1‐diesters provided tetralins with a trans orientation of the 1,4‐substitutents on the cyclohexyl ring; cis‐tetralins were obtained from m‐N,N‐dimethylaminophenyl substituted methylidenemalonates with high diastereoselectivities.

     

A Stereocontrolled 1,2‐Addition Reaction of Tetrazoles with Alkyl Propiolates for the Synthesis of Highly Functionalized Enamines

A stereocontrolled 1,2‐addition reaction of 1‐aryl‐1H‐tetrazoles with alkyl propiolates for the synthesis of highly functionalized enamines was developed. In the presence of silver oxide (Ag₂O), the 1,2‐addition reaction generated (Z)‐N‐cyano enamines in good yields with exclusive formation of the Z‐isomers. Meanwhile, the 1,2‐addition reaction generated (E)‐N‐cyano enamines in the presence of Ag₂O and potassium carbonate (K₂CO₃) with high stereoselectivity and yields.