Asymmetric Synthesis of cis‐3,4‐Disubstituted Chromans and Dihydrocoumarins via an Organocatalytic Michael Addition/ Hemiacetalization Reaction

The organocatalytic domino Michael/hemiacetalization reaction between various aldehydes and ortho‐nitrovinylphenols has been developed. Under the catalysis of diphenyl prolinol trimethylsilyl ether, cis‐3,4‐disubstituted chromanols are obtained in high to excellent yields (81–98%) and stereoselectivities (dr: 86:14 to >99:1, ee 96 to >99%). The corresponding disubstituted chromans are available by dehydroxylation of the domino products in good to excellent yields (58–95%). Furthermore, oxidation of the domino products with pyridinium chlorochromate provided 3,4‐dihydrocoumarins in good yields (65–83%) without any epimerization.     

Non‐Enzymatic Geometry‐Selective Acylation of Tri‐ and Tetrasubstituted α,α′‐Alkenediols

A highly geometry‐selective organocatalytic acylation of tri‐ and tetra‐substituted 2‐alkylidene‐1,3‐propanediols has been developed. The highly E‐selective acylation of various tetrasubstituted 2‐alkylidene‐1,3‐propanediols was achieved in 96 to >99% selectivity for the first time by a non‐enzymatic protocol.     

Organocatalytic Asymmetric Michael Addition of Pyrazolin‐5‐ones to Nitroolefins with Bifunctional Thiourea: Stereocontrolled Construction of Contiguous Quaternary and Tertiary Stereocenters

The first organocatalytic diastereo‐ and enantioselective Michael addition reaction of 4‐substituted‐pyrazolin‐5‐ones to nitroolefins has been developed with a chiral bifunctional thiourea as organocatalyst. A wide variety of desired multi‐substituted pyrazolin‐5‐one derivatives with contiguous quaternary and tertiary stereocenters are smoothly obtained in very good yields (up to 98%) with excellent enantioselectivities (up to>99% ee) and acceptable diastereoselectivities (up to 80:20). This experimentally simple process facilitates the access to various enantioenriched, multiply substituted pyrazolin‐5‐one derivatives, potential biologically active molecules, starting from readily available starting materials.     

Asymmetric Synthesis of 2,3,4‐Trisubstituted Functionalised Tetrahydrofurans via an Organocatalytic Michael Addition as Key Step

The organocatalytic Michael addition of various aldehydes to (2E,4E)‐ethyl 5‐nitropenta‐2,4‐dienoate has been achieved under the catalysis of diphenylprolinol trimethylsilyl ether furnishing the products in good to excellent yields (61–94%) and high stereoselectivities (dr up to >98:2, ee=97 to >99%). Starting from these Michael adducts, 2,3,4‐trisubstituted functionalized tetrahydrofurans are available in two steps by reduction of the aldehyde followed by an intramolecular oxa‐Michael addition in good yields (54–76%) and stereoselectivities (dr up to >95:5, ee=97 to >99%).     

Desymmetrisations of 1‐Alkylbicyclo[3.3.0]octane‐2,8‐diones by Enzymatic Retro‐Claisen Reaction Yield Optically Enriched 2,3‐Substituted Cyclopentanones

A series of 1‐alkylbicyclo[3.3.0]octane‐2,8‐diones was transformed by enzymatic retro‐Claisen reaction using recombinant 6‐oxocamphor hydrolase (OCH) overexpressed in Escherichia coli, to yield optically active 2,3‐substituted cyclopentanones with enantiomeric excesses of up to >95 %. Whilst the parent substrate, bicyclo[3.3.0]octane‐2,8‐dione 12 , was transformed only very slowly, derivatives 13, 14, 15, 16 and 30 with alkyl chains of varying length in the 1‐position were converted rapidly to optically active products with typically 82 % de and up to >95 % enantiomeric excess. The results confirm the apparent requirement of OCH for non‐enolisable diketone substrates, and offer a potential route to decorated cyclopentanone derivatives of multiple chiral centres. Computer modelling of 1‐methylbicyclo[3.3.0]octane‐2,8‐dione into the active site of OCH suggested that the bicyclic [3.3.0] series substrates were accommodated in the active site in similar orientation with the natural enzyme substrate, 6‐oxocamphor, and would thus yield the (2S,3S)‐product series.     

New investigation of 1‐substituted imidazole derivatives as thermal latent catalysts for epoxy‐phenolic resins

Novel 1‐substituted imidazole derivatives ( 4 – 10 ) were synthesized by imidazole and the corresponding substituted reagents (chloromethylpivalate, diphenylphosphinicchloride, di‐tert‐butyldicarbonate, 1,1′‐oxalylchloride, pyrazine, phneylisocyanat, and p‐toluensulfonylchloride). Polymerization of diglycidyl ether of bisphenol A (DGEBA) with 1‐substituted imidazole derivatives, two commercial available catalysts (imidazole and 1‐cyanoethyl‐2‐ethyl‐4‐methylimidazole) and N‐benzylpyrazinium hexafluoroantimonate were investigated as model reactions of epoxy resin systems with respect to the thermal latency and storage stability of the catalysts. The catalytic activity of 1‐substituted imidazole derivatives 4 – 10 depended on the steric and withdrawing electronic effect of the substitution groups. To characterize the cure activation energy and the viscosity‐storage time, the order of thermally latent activity is 1‐tosylimidazole ( 6 ) > 1,1′‐oxalyldiimidazole ( 8 ) > N‐benzylpyrazinium hexafluoroantimonate (BPH, 3 ) > 1‐tritylimidazole ( 9 ) > N‐phenyl‐imidazole‐1‐carboxamide ( 5 ) > 3‐(diphenylphosphinoyl)imidazole ( 7 ) > tert‐butyl‐1H‐imidazole‐1‐carboxylate ( 4 ) > 1‐cyanoethyl‐2‐ethyl‐4‐methylimidazole (2E4MZ, 2 ) > 1‐[(pivalyloxy)methyl]imidazol ( 10 ) > imidazole ( 1 ). In comparison with commercially available catalysts imidazole ( 1 ) and 1‐cyanoethyl‐2‐ethyl‐4‐methylimidazole ( 2 ) and a cationic latent catalyst N‐benzylpyrazinium hexafluoroantimonate (BPH, 3 ) as the standard compounds, in addition to 1‐[(pivalyloxy)methyl]imidazole ( 10 ), the 1‐substituted imidazole derivatives ( 4 – 9 ) revealed better thermal latency. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Kinetic Resolution of 1‐Biaryl‐ and 1‐(Pyridylphenyl)alkan‐1‐ols Catalysed by the Lipase B from Candida antarctica

Lipase B from Candida antarctica (CAL‐B) catalyses the highly enantioselective (E>200) transesterification of some 1‐biaryl‐2‐yl‐, ‐3‐yl‐, and ‐4‐ylethanols and ‐propan‐1‐ols, as well as 1‐(o‐, m‐, and p‐pyridylphenyl)ethanols, 6 , with vinyl acetate, Kazlauskas' rule being obeyed in all cases. meta and para‐Substituted substrates were transformed within several hours (conversion degree ranging from 23–50%), reaction rates for propan‐1‐ol derivatives being slower than those for ethanol derivatives. Transesterifications of ortho‐substituted alcohols took several days and were accompanied by a chemoenzymatic side reaction: the formation of another acetate derived from the hemiacetal between 6 and acetaldehyde coming from vinyl acetate. This side reaction was suppressed in the presence of isopropenyl acetate as acyl donor, conversion degrees for transesterification ranging from 20–40% after ten days (E>200). The usefulness of (R)‐ 6p as ligand in the asymmetric addition of diethylzinc to benzaldehyde was also demonstrated.     

Efficient Allylation of Nucleophiles Catalyzed by a Bifunctional Heterogeneous Palladium Complex‐Tertiary Amine System

We demonstrate the synergistic catalysis of a silica‐supported diaminopalladium complex and a tertiary amine (SiO₂/diamine/Pd/NEt₂) as well as synthetic scope of the Tsuji–Trost reaction of 1,3‐dicarbonyls, phenols, and carboxylic acids with allyl carbonate and acetates. The synergistic catalysis of SiO₂/diamine/Pd/NEt₂ exhibited wide applicability and high activity for the Tsuji–Trost reaction. For example, the reaction of ethyl 3‐oxobutanate with allyl methyl carbonate afforded the allylated product in >99% yield at 70 °C for 5 h. The yield of allylated products was 26% for SiO₂/diamine/Pd, without immobilization of the tertiary amine group. In the reaction of 1.0 mmol of ethyl 3‐oxobutanate using 0.60 μmol of Pd in SiO₂/diamine/Pd/NEt₂, the turnover number (TON) of Pd reached up to 1070 within 24 h. Phenols with electron‐withdrawing groups, such as nitro and chloro groups, on the para position resulted in high product yields. The SiO₂/diamine/Pd/NEt₂ catalyst was reusable at least 4 times without appreciable loss of its activity and selectivity in the reaction of p‐chlorophenol.     

Enantioselective Hydrolysis of d,l‐Menthyl Benzoate to L‐(–)‐Menthol by Recombinant Candida rugosa Lipase LIP1

The stereoselective synthesis of L ‐menthol is an attractive process in the flavor and fragrance industry. One promising way to obtain optically pure menthol is the enantioselective hydrolysis of menthol esters under enzymatic catalysis. We developed an effective and highly enantioselective method for the synthesis of L ‐(−)‐menthol (>99% EE) by hydrolyzing the key industrial starting compound, d, l ‐menthyl benzoate. The enzyme of choice was the lipase from Candida rugosa (CRL). While commercially available preparations of this lipase showed only minor selectivity (E=15), excellent enantiomeric purity (E>100) was achieved using the heterologously expressed isoenzyme LIP1.     

Aerobic Oxidation of Benzylic Alcohols in Water by 2,2,6,6‐Tetramethylpiperidine‐1‐oxyl (TEMPO)/Copper(II) 2‐N‐Arylpyrrolecarbaldimino Complexes

Novel copper(II) 2‐N‐arylpyrrolecarbaldimine‐based catalysts for the aerobic oxidation of benzylic alcohols mediated by the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) radical are reported. The catalytic activity for both synthesized and in situ made complexes in alkaline water solutions was studied revealing high efficiency and selectivity (according to GC selectivity always >99%) for both of these catalytic systems. For example, quantitative conversion of benzyl alcohol to benzaldehyde can be achieved with the in situ prepared bis[2‐N‐(4‐fluorophenyl)‐pyrrolylcarbaldimide]copper(II) catalysts in 2 h with atmospheric pressure of O₂ at 80 °C. Interestingly, these catalysts can utilize dioxygen as well as air or hydrogen peroxide as the end oxidants, producing water as the only by‐product.     

Synthesis,extraction, and anti‐bacterial studies of some new bis‐1,2,4‐triazole derivatives part I

A series of new bis triazole Schiff base derivatives (4) were prepared in good yields by treatment of 4‐amino‐3,5‐diphenyl‐4H‐1,2,4‐triazole (3) with bisaldehydes (1). Schiff bases (4) were reduced with NaBH₄ to afford the corresponding bisaminotriazoles (5). All the new compounds were characterized by IR, ¹H NMR and ¹³C NMR spectral data. Their overall extraction (log K_ex) constants for 1 : 1 (M : L) complexes and CHCl₃/H₂O systems were determined at 25 ± 0.1°C to investigate the relationship between structure and selectivity toward various metal cations. The extraction equilibrium constants were estimated using CHCl₃/H₂O membrane transfer with inductively coupled plasma‐atomic emission spectroscopy spectroscopy. The stability sequence of the triazole derivatives in CHCl₃ for the metal cations was exhibited a characteristic preference order of extractability to metal ions [Fe(III) > Cu(II) > Pb(II) > Co(II) > Ni(II) > Mn(II) > Zn(II) > Mg(II) > Ca(II)]. The compounds were tested for anti‐microbial activity applying agar diffusion technique for 11 bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Asymmetric Synthesis of Polyfunctionalized Pyrrolidines via a Thiourea Catalyzed Domino Mannich/Aza‐Michael Reaction

The domino Mannich/aza‐Michael reaction of γ‐malonate‐substituted α,β‐unsaturated esters with N‐protected arylaldimines has been achieved. Catalyzed by bifunctional thioureas, 2,5‐cis‐configured polysubstituted pyrrolidines are obtained in good to excellent yields (76–99%), enantioselectivities (75–94%) and excellent diastereoselectivities (de >95%). The pure stereoisomers are available by crystallization and removal of the racemates.     

Catalytic Asymmetric Hydrogenation of α‐Arylcyclohexanones and Total Synthesis of (−)‐α‐Lycorane

An efficient catalytic asymmetric hydrogenation of racemic α‐arylcyclohexanones with an ethylene ketal group at the 5‐position of the cyclohexane ring via dynamic kinetic resolution has been developed, giving chiral α‐arylcyclohexanols with two contiguous stereocenters with up to 99% ee and >99:1 cis/trans‐selectivity. Using this highly efficient asymmetric hydrogenation reaction as a key step, (−)‐α‐lycorane was synthesized in 19.6% overall yield over 13 steps from commercially available starting material.     

Base–Base Bifunctional Catalysis: A Practical Strategy for Asymmetric Michael Addition of Malonates to α,β‐Unsaturated Aldehydes

Lewis base–Brønsted base bifunctional catalysis is a novel and practical strategy for the asymmetric Michael addition. The addition of malonates to a series of α,β‐unsaturated aldehydes can take place under base–base bifunctional catalytic conditions using 0.5–5 mol% of (S)‐2‐[diphenyl(trimethylsilyloxy)methyl]pyrrolidine as catalyst and 5–30 mol% of lithium 4‐fluorobenzoate as additive base with up to 99% ee.     

Optically Pure 1,2‐Bis[(o‐alkylphenyl)phenylphosphino]ethanes and Their Use in Rhodium‐Catalyzed Asymmetric Hydrogenations of α‐(Acylamino)acrylic Derivatives

Optically pure (S,S)‐1,2‐bis[(o‐alkylphenyl)phenylphosphino]ethanes 1a–d were prepared in four steps from phenyldichlorophosphine via phosphine‐boranes as the intermediates. The rhodium complexes 5a–d of these diphosphines were used for the asymmetric hydrogenations of α‐(acylamino)acrylic derivatives including β‐disubstituted derivatives. Markedly high enantioselectivity (78–>99%) was observed for the reduction of β‐monosubstituted derivatives. β‐Disubstituted derivatives were also reduced in considerably high enantioselectivity (up to 90%). The single crystal X‐ray analysis of the rhodium complex 5c of (S,S)‐1,2‐bis[phenyl(5′,6′,7′,8′‐tetrahydronaphthyl)phosphino]ethane ( 1c) revealed its δ‐type structure with face orientation of the two tetrahydronaphthyl groups and edge orientation of the two phenyl groups. This conformation corresponds to that of the rhodium complex of 1,2‐bis[(o‐methoxyphenyl)phenylphosphino]ethane (DIPAMP); the rhodium complex of (R,R)‐DIPAMP, whose chirality at phosphorus is opposite that of 5c , exhibits a λ‐type structure with the face orientation of the two o‐methoxyphenyl groups and the edge orientation of the two phenyl groups. The conformational similarity of these rhodium complexes as well as the stereochemical outcome in the asymmetric hydrogenations means that the coordinative interaction of the methoxy group of DIPAMP with rhodium metal is not the main factor that affects asymmetric induction.     

Facile Construction of Vicinal Quaternary and Tertiary Stereocenters via Regio‐ and Stereoselective Organocatalytic Michael Addition to Nitrodienes

A highly regio‐ and stereoselective protocol for the synthesis of vicinal quaternary and tertiary stereocenters has been developed. The 6′‐OH Cinchona alkaloids ( BnCPN or BnCPD ) at low catalyst loading (0.5–5 mol%) catalyze the Michael addition of trisubstituted carbon nucleophiles to nitrodienes in good to excellent yield (up to >99), high enantioselectivity (up to 99% ee) and high diastereoselectivity (up to >99:1 dr) under mild reaction conditions.     

Enantioselective Aza‐Henry Reaction of Imines Bearing a Benzothiazole Moiety Catalyzed by a Cinchona‐Based Squaramide

An efficient enantioselective aza‐Henry reaction of nitroalkanes to imines bearing a benzothiazole moiety catalyzed by a Cinchona‐based squaramide has been developed. In the reaction of imines, the corresponding products were obtained in good to excellent yields (up to 99%) with excellent enantioselectivities (up to >99% ee) for most of the aromatic substituted imines. The imines with electron‐withdrawing groups gave better yields than those bearing electron‐donating groups in the aza‐Henry reaction. Moreover, a one‐pot three‐component enantioselective aza‐Henry reaction using 2‐aminobenzothiazoles, aldehydes, and nitromethane was also developed. Moderate to good yields and high enantioselectivities were obtained in the one‐pot cases (up to 98% ee).     

Heme Oxygenase Inhibition by 1‐Aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and Their Derivatives

Previous studies by our research group have been concerned with the design of selective inhibitors of heme oxygenases (HO‐1 and HO‐2). The majority of these were based on a four‐carbon linkage of an azole, usually an imidazole, and an aromatic moiety. In the present study, we designed and synthesized a series of inhibition candidates containing a shorter linkage between these groups, specifically, a series of 1‐aryl‐2‐(1H‐imidazol‐1‐yl/1H‐1,2,4‐triazol‐1‐yl)ethanones and their derivatives. As regards HO‐1 inhibition, the aromatic moieties yielding best results were found to be halogen‐substituted residues such as 3‐bromophenyl, 4‐bromophenyl, and 3,4‐dichlorophenyl, or hydrocarbon residues such as 2‐naphthyl, 4‐biphenyl, 4‐benzylphenyl, and 4‐(2‐phenethyl)phenyl. Among the imidazole‐ketones, five ( 36 – 39 , and 44 ) were found to be very potent (IC₅₀<5 μM ) toward both isozymes. Relative to the imidazole‐ketones, the series of corresponding triazole‐ketones showed four compounds ( 54 , 55 , 61 , and 62 ) having a selectivity index >50 in favor of HO‐1. In the case of the azole‐dioxolanes, two of them ( 80 and 85 ), each possessing a 2‐naphthyl moiety, were found to be particularly potent and selective HO‐1 inhibitors. Three non‐carbonyl analogues ( 87 , 89 , and 91 ) of 1‐(4‐chlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone were found to be good inhibitors of HO‐1. For the first time in our studies, two azole‐based inhibitors ( 37 and 39 ) were found to exhibit a modest selectivity index in favor of HO‐2. The present study has revealed additional candidates based on inhibition of heme oxygenases for potentially useful pharmacological and therapeutic applications.     

Hydrogenation of α‐Keto Ethers: Dynamic Kinetic Resolution with a Heterogeneous Modified Catalyst and a Heterogeneous Base

The first successful example of the asymmetric hydrogenation of substituted α‐keto ethers with Cinchona‐modified Pt/Al₂O₃ is reported. In the absence of an additional base, kinetic resolution of the racemic starting material was observed with high diastereoselectivity and ee's up to 98% at conversions of <50%. Addition of KOH gave a strong reaction acceleration but racemic product. Immobilization of OH ^– on solid ion exchangers resulted in the desired dynamic kinetic resolution, and ee's of >80% were obtained at >95% conversion. These effects are rationalized on the basis of a simple kinetic and structural model.     

Highly Active and Selective Semihydrogenation of Alkynes with the Palladium Nanoparticles‐Tetrabutylammonium Borohydride Catalyst System

Palladium nanoparticles are prepared from palladium(II) acetate and 2 equivalents of potassium tert‐butoxide in the presence of 4‐octyne. The palladium nanoparticles‐tetrabutylammonium borohydride system shows excellent catalytic activity and selectivity in the semihydrogenation of alkynes to the [(Z)‐]alkenes. The hydrogenation of 4‐octyne is conducted with the catalyst system at a substrate‐to‐palladium molar ratio of 10,000–200,000 under 8 atm of hydrogen to give (Z)‐4‐octene in>99% yield. Isomerization and over‐reduction of the Z‐alkene are very slow even after consumption of the alkyne.