Influence of solvent type on dibenzothiophene adsorption onto activated carbon fiber and granular coconut-shell activated carbon

The adsorption behavior of dibenzothiophene (DBT) on an activated carbon fiber (ACF) and a granular coconut-shell activated carbon (GCSAC) in the solvents n-hexane, n-decane, toluene, and mixture of n-decane and toluene was investigated. The DBT adsorption onto both samples was more active in n-hexane than in n-decane. The lowest DBT adsorption was observed in toluene. Regardless of the type of activated carbons and solvents, all the isotherms fit the Freundlich equation better than the Langmuir equation. At low equilibrium concentrations of <2 mass ppm-S, GCSAC displayed greater capacity for DBT adsorption than did ACF in all the tested solvents. The adsorption kinetics of ACF and GCSAC in all the tested solvents were governed by a pseudo-second-order model.     

The effect of protein binding on ibuprofen adsorption to activated carbons

The potential of a range of polymer-based activated carbons to remove a non-steroidal anti-inflammatory drug ibuprofen from protein containing and protein-free solutions was studied. The adsorption capacity of five activated carbons produced from phenol-formaldehyde resin precursors (MAST Carbon Ltd) was compared to a cellulose coated activated carbon Norit RBX used in a commercial Adsorba^®300C haemoperfusion column (Gambro).Ibuprofen adsorption was studied in batch experiments over 24 h at pH=7.6 and 25 °C and adsorption equilibrium data were correlated with the Langmuir and Freundlich equations.Results showed that uncoated mesoporous MAST carbons can remove ibuprofen from model solutions both in the presence and absence of serum albumin. Ibuprofen is a highly protein-bound drug and the presence of serum albumin significantly affects the adsorption of ibuprofen by cellulose-coated microporous carbon used in Adsorba^®300C column.     

Adsorption characteristics of antibiotics trimethoprim on powdered and granular activated carbon

The adsorption characteristics of trimethoprim (TMP) onto powdered activated carbon (PAC) and granular activated carbon (GAC) were studied. The adsorption isotherms could be plotted using the Langmuir, Freundlich and Toth models with a reasonable degree of accuracy. Toth isotherm model was better for describing the adsorption equilibrium than Freundlich model, even though the Langmuir model also agreed with the experimental data well. It shows that the Toth model is adequate for fitting equilibrium data for adsorption of TMP on both PAC and GAC in this study. Fixed-bed breakthrough curves were studied under various operating conditions. The performances of the fixed-bed GAC system was also simulated by a model developed with homogeneous surface diffusion model (HSDM).     

Kinetic and equilibrium modeling of liquid‐phase adsorption of lead and lead chelates on activated carbons

The sawdust (SD) waste generated in the timber industry was converted to a low‐cost activated carbon (SDAC) using a simpler and cheaper activation process, single‐step steam pyrolysis activation. The possibility of utilizing SDAC for the removal of lead (Pb(II)) in the absence of ligands and nitrilotriacetic acid (NTA) and ethylenediaminetetraacetic acid (EDTA) chelated Pb(II) complexes from the liquid phase was examined and the results were compared with those for commercial activated carbon (CAC). SDAC shows a high adsorption capacity for Pb(II) and Pb(II) chelates compared with CAC. The extent of adsorption of Pb(II) and Pb(II) chelates on activated carbons was found to be a function of solution pH and species distribution of Pb(II) and Pb(II) chelates. The optimum pH range for the removal of Pb(II) in the absence of ligands by SDAC was 6.5–8.0, whereas its maximum removal by CAC was observed at pH 6.5. In the presence of ligands, the extent of Pb(II) adsorption was enhanced in the pH range 2.0–5.0 and was reduced significantly in the pH range 6.0–8.0. The maximum uptake of Pb(II) chelates for both carbons was observed at pH 5.0. Kinetic models such as pseudo‐first‐order, pseudo‐second‐order and pore diffusion were tested to investigate the adsorption mechanism. Batch kinetic studies showed that the adsorption of Pb(II) from aqueous solutions with and without ligands could be best described by a psuedo‐first‐order model for both carbons. The effect of pH on the adsorption isotherms of Pb(II) and Pb(II) chelates was also investigated. The applicability of the Langmuir and Freundlich isotherms, established for various initial concentrations of the adsorbate and for different pH values, was tested at 30 °C. Copyright © 2003 Society of Chemical Industry     

Coniferous Wood Sawdust-based Activated Carbons as Adsorbents Obtained with the Use of Microwave Radiation

Activated carbons were prepared by physical and direct activation of sawdust pellets coming from coniferous trees, with the use of microwave radiation. The activated carbons obtained were used as adsorbents for the removal of methylene blue (MB) from aqueous solutions. Liquid-phase adsorption experiments were conducted and the maximum adsorption capacity of each activated carbon sample was determined. The effects of activation procedure as well as adsorption tests parameters i.e., temperature, pH, initial methylene blue concentration, and contact time on the sorption capacity of each activated carbon were investigated. The kinetic models for MB adsorption on the activated carbons were also studied. Better fit to the experimental data was obtained with the Langmuir isotherm than Freundlich one, for all samples.     

Preparation and characterization of spherical activated carbons from oil agglomerated bituminous coals for removing organic impurities from water

A new and simple method of producing of spherical activated carbons (SACs) from different bituminous coals, i.e., gas coal, gas-coking coal and orthocoking coal, is presented. Coal agglomerates of spherical shape obtained by oil agglomeration using rapeseed oil and linseed oil, were subjected to carbonization and activation with steam at 850 °C. The SACs prepared from gas-coking coal (hvAb) agglomerates were characterized by the best developed porous structure with surface area S_BET of about 800 m²/g and pore volume of 0.40 cm³/g. The adsorption capacity of the produced SACs was determined in terms of substituted phenolic compounds. The adsorption of 2-chlorophenol (OCP), 4-chlorophenol (PCP) and 4-nitrophenol (PNP) from aqueous solutions was studied under a static conditions on the SAC prepared from gas-coking coal agglomerated using rapeseed oil. At high concentrations of the solute the adsorption behavior of OCP was found to be different in comparison to PCP and PNP. The adsorption of the two last phenolic compounds on the selected SAC is very well described by Langmuir adsorption model. For OCP a two-stepped adsorption isotherm was obtained. The Langmuir isotherm equation fits very well only for the first stage of the OCP adsorption.     

Adsorption of Hg(II) ions from aqueous chloride solutions using powdered activated carbons

Activated carbons were developed from Casurina equisetifolia leaves, by chemically treating with sulfuric acid (1:1) or zinc chloride (25%), at low (425 °C) and high (825 °C) temperatures. The resulting powdered activated carbons were applied for removing mercuric ions from aqueous solution at different agitation times and mercuric ion concentrations. The equilibrium data fitted well the Langmuir adsorption isotherm. The Langmuir adsorption capacities were 12.3 and 20.3 mg g⁻¹ for low temperature carbons and 43.9 and 38.5 mg g⁻¹ for high temperature carbons impregnated with H₂SO₄ and ZnCl₂, respectively. Studies of the effects of carbon dosage, NaCl concentrations and solution pH values were carried out for the more effective, high temperature carbons. Increasing NaCl concentration resulted in a significant decrease in the adsorption efficiency. Adsorption was high from solutions with low and neutral pH values and lower for solutions with alkaline pH values for the high temperature carbons.     

Comparisons of pore properties and adsorption performance of KOH-activated and steam-activated carbons

Carbonaceous adsorbents with controllable pore sizes derived from carbonized pistachio shells (i.e., char) were prepared by the KOH activation and steam activation methods in this work. The pore properties including the BET surface area, pore volume, pore size distribution, and pore diameter of these activated carbons were characterized by the t-plot method based on N₂ adsorption isotherms. Through varying the KOH/char ratios from 0.5 to 3, the KOH-activated carbons exhibited BET surface areas ranging from 731 to 1687 m²/g with a similar micropore content (80–92%). The carbons activated by steam at 830 °C for 2 h had a BET surface area of 821 m²/g with the micropore content of 42%. The micropore/total pore volume ratio (V_micro/V_pore) and average pore size (D_pore) were independent of the KOH/char ratio, revealing that KOH activation is a powerful method in developing and controlling the number of micropores with a very similar pore size distribution. The adsorption equilibria and kinetics of methylene blue, basic brown 1, acid blue 74, 2,4-dichlorophenol, 4-chlorophenol, and phenol from water on all activated carbons at 30 °C were investigated to demonstrate the fact that adsorption of organics is not only dependent upon the BET surface area but is also determined by the relative size between pores and molecules. The adsorption isotherms were subjected to the model fitting according to Langmuir and Freudlich equations. By comparing the projected area of adsorbates, the surface coverage of phenols is about 3.6 times of that of dyes (based on unit gram of activated carbon). The Elovich equation was found to suitably describe the adsorption process of all KOH-activated carbons while the adsorption behavior on the steam-activated carbon was reasonably fitted with the intraparticle diffusion model.     

Vehicular Tire as Potential Adsorbent for the Removal of Polycyclic Aromatic Hydrocarbons

ABSTRACT

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants, entering into various water and wastewater systems through various natural and anthropogenic activities. The aim of the work is to convert vehicular tires, a highly available waste material, into potential adsorbent for the removal of PAHs from aqueous solutions. The BET surface area of the prepared vehicular tire activated carbon is 643.86 m²/g. Removal of PAHs using activated carbons and the effect of various parameters such as contact time, adsorbent dose, temperature, and pH on the adsorption have been evaluated. The data were fitted to Freundlich and Langmuir isotherms and values of various constants were evaluated. In all the cases, Freundlich model was found to be better fitted. The equilibrium time for adsorption of PAHs was 120 min. The values of thermodynamic parameters, such as Gibb's free energy change ΔG°, enthalpy change ΔH°, and entropy change ΔS°, were calculated using adsorption equilibrium constants obtained from Langmuir isotherm. The thermodynamic data for adsorption of PAHs revealed spontaneity and endothermic nature of the adsorption process. The samples were analyzed using a UV–vis spectrophotometer for PAH determination. Mixture of sodium hydroxide and ethanol in different proportions was tried for desorption of PAHs and 50% ethanolic NaOH solution was most effective. The developed activated carbon demonstrates good adsorption and desorption capabilities for PAHs, indicating towards its suitability for use in the treatment processes of various industrial effluents or water streams containing PAHs.     

Vanadium(V) Removal by Adsorption onto Activated Carbon Derived from Starch Industry Waste Sludge

This study examines the adsorption potential of activated carbons for vanadium (V) removal from aqueous solution. Activated carbons were produced via chemical activation of waste treatment sludge from the starch industry. Specific surface area and pore sizes of waste sludge samples were determined through chemical activation and pyrolysis. Experimental data indicated that sludge samples had micropore structure and specific surface area of up to 1196 m²/g. First-order and second-order models were applied to determine adsorption kinetics. Freundlich, Langmuir, and Dubinin–Radushkevich isotherms were used to analyze equilibrium data of adsorption. Equilibrium adsorption data showed the best fit to the Freundlich isotherm. Adsorption of vanadium (V) follows second-order kinetic models. Maximum adsorption was observed at pH 4.0. Langmuir adsorption capacity was found to be 37.17 mg/g. The results of the study indicated that activated carbon obtained from industrial sewage sludge was effective in removing vanadium from aqueous solutions, which creates a significant advantage for treatment of industrial wastewaters and management of solid wastes.     

Peanut Shell Activated Carbon： Characterization,Surface Modification and Adsorption of Pb^2＋ from Aqueous Solution

Metal ion contamination of drinking water and waste water, especially with heavy metal ion such as lead, is a serious and ongoing problem. In this work, activated carbon prepared from peanut shell （PAC） was used for the removal of Pb^2＋ from aqueous solution. The impacts of the Pb25 adsorption capacities of the acid-modified carbons oxidized with HNO3 were also investigated. The surface functional groups of PAC were confirmed by Fourier transform infrared （FTIR） spectroscopy, X-ray photoelectron spectroscopy （XPS）, Boehm titration. The textural properties （surface area, total pore volume） were evaluated from the nitrogen adsorption isotherm at 77 K. The experimental results presented indicated that the adsorption data fitted better with the Langmuir adsorption model. A comparative study with a commercial granular activated carbon （GAC） showed that PAC was 10.3 times more efficient compared to GAC based on Langmuir maximum adsorption capacity. Further analysis results by the Langmuir equation showed that HNO3 [20% （by mass）] modified PAC has larger adsorption capacity of Pb^2＋ from aqueous solution （as much as 35.5 mg·g^-1）. The adsorption capacity enhancement ascribed to pore widening, increased cation-exchange capacity by oxygen groups, and the promoted hydrophilicity of the carbon surface.     

Preparation and Characterization of Activated Carbon from Chestnut Shell and its Adsorption Characteristics for Lead

Activated carbons were prepared from chestnut shell by phosphoric acid activation and the prepared activated carbons were used to remove lead(II) from aqueous solutions. The effects of impregnation ratio (IR) and activation temperature on activated carbon production were investigated. The produced activated carbons were characterized by N₂ adsorption, scanning electron microscopy (SEM), and atomic force microscopy (AFM) techniques. The highest surface area (1611 m²/g) and total pore volume (0.7819 cm³/g) were obtained at a carbonization temperature of 500°C with an impregnation ratio of 3/1. The resulting activated carbon was used for removal of lead(II) from aqueous solution. The effects of temperature, contact time, and adsorbent dosage were investigated. The adsorption isotherm studies were carried out and the obtained data were analyzed by the Langmuir, Freundlich, and Temkin equations. The rate of adsorption was found to conform to the pseudo-second-order kinetic model. The Langmuir isotherm equation showed better fit for all temperatures and the maximum adsorption capacities of lead(II) was obtained as 138.88 mg/g at 45°C.     

Adsorption of resorcinol and catechol on granular activated carbon: Equilibrium and kinetics

Investigations were conducted in the batch mode for studying the adsorption behavior of resorcinol and catechol on granular activated carbon from a basic salt medium (BSM) at pH≈7.1 and temperature≈30 °C. The isotherm data were correlated with six isotherm models, namely Langmuir, Freundlich, Redlich–Peterson, Radke–Prausnitz, Toth, and Fritz–Schlunder’s using a nonlinear regression technique. It is observed that the catechol isotherm data may be represented by Redlich–Peterson, Radke–Prausnitz, Toth, and Fritz–Schlunder models with similar accuracy (max. dev. 12%). And the resorcinol data may be represented by Freundlich, Redlich–Peterson, Radke–Prausnitz, and Fritz–Schlunder models equally well (max. dev. 15%). Freudlich being a simple model is recommended for resorcinol. At the conditions investigated in this study, catechol is adsorbed to a greater extent than resorcinol. This is due to the compound’s solubility and position of the –OH group on the benzene aromatic ring. The kinetics of adsorption have been found to be diffusion controlled and the value of effective particle diffusion coefficients is of the order of 10⁻¹³ m²/s. Three distinct phases of kinetics—rapid, medium, and slow—have been observed. These results should be useful for the design of adsorbers for removing these pollutants.     

Adsorption characteristics of carbonized bark for phenol and pentachlorophenol

The potential of using carbonized slash pine bark as a substitute for activated carbon was examined in this study. The bark was carbonized by slow heating in nitrogen for 6·5 h to 672°C. The BET-N₂ surface area, average micropore and mesopore diameter, and micropore volume were 332 m² g⁻¹ 21·7 Å, and 0·125 cm³ g⁻¹, respectively. The adsorption capacities for phenol and pentachlorophenol (PCP) at pH 2 and pH 8 were evaluated. The Langmuir equation provided a slightly better fit than the Freundlich equation to two sets of phenol data. The calculated Freundlich constants, K = 0·41–0·58 mmol/g/(mmol dm⁻³)^1/n and 1/n = 0·30–0·41, were lower and higher, respectively, than literature values for activated carbons. The adsorption capacity of the carbonized bark was much lower for PCP than for phenol. The protonated and anionic PCP isotherms were Type II or III, respectively, in the Brunauer classification. The BET equation provided the best fit to protonated PCP isotherm data. The anionic PCP data were fitted to both the BET model and an equation used in the literature to represent phosphate adsorption on activated carbons. Non-linear regression of the data for both phenol and PCP adsorption with the Freundlich, Langmuir and BET equations generally gave more accurate param-eters, compared with the use of linearized equations to obtain the parameters. © 1998 SCI.     

Simultaneous Removal of Algae and Their Secondary Algal Metabolites from Water by Hybrid System of DAF and PAC Adsorption

Abstract

The feasibility of a hybrid system consisting of powdered activated carbon (PAC) adsorption and dissolved air flotation (DAF) processes was examined for the simultaneous removal of algae (anabaena and mycrocystis) and their secondary algal metabolites (2‐methylisoboneol and geosmin). Before studying the hybrid system, adsorption equilibrium and kinetics of organics (2‐methylisoboneol and geosmin) produced from algae on three powdered activated carbons (wood‐based, coal‐based, coconut‐based) were studied. The flotation efficiency of algae and PAC in DAF process was evaluated with zeta potential measurements. Interestingly, we found that the agglomerate of bubble and PAC particle can be successfully floated by DAF. In addition, the simultaneous removal of algae and organics (i.e., secondary algal metabolites) dissolved in water can be achieved by using the hybrid system of adsorption/DAF processes.     

Utilization of Raw and Activated Date Pits for the Removal of Phenol from Aqueous Solutions

Activated carbons prepared from date pits, an agricultural waste byproduct, have been examined for the adsorption of phenol from aqueous solutions. The activated carbons were prepared using a fluidized bed reactor in two steps; carbonization at 700 °C for 2 hours in N₂ atmosphere and activation at 900 °C in CO₂ atmosphere. The kinetic data were fitted to the models of intraparticle diffusion, pseudo‐second order, and Lagergren, and followed more closely the pseudo‐second‐order chemisorption model. The isotherm equilibrium data were well fitted by the Freundlich and Langmuir models. The maximum adsorption capacity of activated date pits per Langmuir model was 16 times higher than that of nonactivated date pits. The thermodynamic properties calculated revealed the endothermic nature of the adsorption process. The uptake of phenol increased with increasing initial phenol concentration from10 to 200 ppm and temperature from 25 to 55 °C, and decreased with increasing the solution pH from 4 to 12. The uptake of phenol was not affected by the presence of NaCl salt.     

Surface modified granular activated carbon for enhancement of nickel adsorption from aqueous solution

Coal-based granular activated carbon was modified with acetates of sodium, potassium and lithium at concentrations of 10 and 15% and used as adsorbents to explore the adsorption mechanism of nickel ion in aqueous solution. Acetate treatment reduced surface area and pore volume of the activated carbons, but the adsorption amount of Ni(II) on the modified activated carbons (MAC) was greater than that on the virgin activated carbon. The adsorption depended on pH of the solution with an optimum at 4.5 and the adsorbed nickel could be fully desorbed by using 0.05M HCl solution. The maximum adsorption capacity of nickel ion on Li (15 wt%) modified activated carbon was 151.3 mg/g and the adsorption isotherm follows Langmuir, Sips, and Redlich-Peterson isotherm models better than the Freundlich isotherm model. The kinetic data was better fitted by a non-linear form of the pseudo-first order than the pseudo-second order, but the difference between two kinetic models was small.     

The effect of activated carbon surface moisture on low temperature mercury adsorption

Experiments with elemental mercury (Hg⁰) adsorption by activated carbons were performed using a bench-scale fixed-bed reactor at room temperature (27°C) to determine the role of surface moisture in capturing Hg⁰. A bituminous-coal-based activated carbon (BPL) and an activated carbon fiber (ACN) were tested for Hg⁰ adsorption capacity. About 75-85% reduction in Hg⁰ adsorption was observed when both carbon samples’ moisture (∼2 wt.% as received) was removed by heating at 110°C prior to the Hg⁰ adsorption experiments. These observations strongly suggest that the moisture contained in activated carbons plays a critical role in retaining Hg⁰ under these conditions. The common effect of moisture on Hg⁰ adsorption was observed for both carbons, despite extreme differences in their ash contents. Temperature programmed desorption (TPD) experiments performed on the two carbons after adsorption indicated that chemisorption of Hg⁰ is a dominant process over physisorption for the moisture-containing samples. The nature of the mercury bonding on carbon surface was examined by X-ray absorption fine structure (XAFS) spectroscopy. XAFS results provide evidence that mercury bonding on the carbon surface was associated with oxygen. The results of this study suggest that surface oxygen complexes provide the active sites for mercury bonding. The adsorbed H₂O is closely associated with surface oxygen complexes and the removal of the H₂O from the carbon surface by low-temperature heat treatment reduces the number of active sites that can chemically bond Hg⁰ or eliminates the reactive surface conditions that favor Hg⁰ adsorption.     

Characterisation of lignite as an industrial adsorbent

An alternative use of the abundant and inexpensive lignite (also known as brown coal) as an industrial adsorbent has been characterised. The adsorptive properties of two Victorian lignite without any pre-treatment were investigated using the cationic methylene blue dye as a model compound in aqueous solutions. Two commercial activated carbon products were also studied for comparison. The adsorption equilibrium of the four adsorbents was better described by the Langmuir isotherm model than the Freundlich model. The adsorption capacities of the two untreated lignite adsorbents, Loy Yang and Yallourn, calculated using Langmuir isotherms were 286 and 370 mg/g, respectively, higher than a coconut shell-based activated carbon (167 mg/g), but lower than a coal-based activated carbon (435 mg/g). Surface area results suggested that larger micropores and mesopores were important for achieving good methylene blue adsorption by the activated carbons. However, FTIR and cation exchange capacity analyses revealed that, for the lignite, chemical interactions between lignite surface functional groups and methylene blue molecules occurred, thereby augmenting its adsorption capacity.     

Adsorption of methylene chloride vapor on activated carbons

A laboratory investigation on the adsorption of hazardous methylene chloride (METH) vapor on the commercial activated carbons BPL and PCB, which were made from bituminous coal and coconut shell, respectively, was conducted at 283, 293, 303, and 313 K. The physical properties and surface functional groups of the two activated carbons were also measured and compared with each other. The experimental results indicate that the adsorption capacity of carbon PCB is slightly higher than that of carbon BPL. It was found that the Langmuir, Freundlich, and Dubinin–Radushkevich adsorption equations were well fitted by the measured adsorption data. The values of the parameters of the adsorption equations were determined for the two adsorbents. The physical properties (e.g. micropore volume) of the adsorbents are consistent with the parameters obtained from the adsorption results.