Comparison of discharge characteristics and methylene blue degradation through a direct-current excited plasma jet with air and oxygen used as working gases

Through using a direct-current driven plasma jet operated underwater, degradation of methylene blue(MB) is investigated with air and oxygen used as working gases. With a low power voltage,a plasma plume extends from the needle electrode, which is purple in air. It turns pink after it bridges the two electrodes. During the process, oxygen plasma remains white. Discharge operates in a pulsed mode or a continuous one, which depends on the magnitude of power voltage. For the pulsed mode, oxygen discharge has a shorter plume and a higher pulse frequency than air discharge under the same power voltage. For the same current of the continuous mode, both power and gap voltages of oxygen discharge are higher than those of air discharge. Moreover, MB degradation efficiency increases with increasing power voltage or initial concentration of MB solution. Compared with air discharge, oxygen discharge has a higher degradation efficiency with the same power voltage and treatment time. The pulsed oxygen discharge with power voltage of about 6.5 k V has the highest efficiency in degrading MB dye, reaching approximately 85.8% after 10 min treatment. As a comparison, after 10 min treatment in air discharge, the highest degradation efficiency is 63.7%, which appears in the continuous mode at a power voltage of 10.6 kV. Besides, optical spectra from the discharges are also compared for the two types of working gases.     

Investigation of optimum discharge characteristics and chemical activity of AC driven air plasma jet and its anticancer effect

In this study,we investigated the effects of the quartz tube diameter,air flow rate,and applied voltage on the characteristics of an air plasma jet to obtain the optimized discharge characteristics.The physicochemical properties and concentration of reactive oxygen and nitrogen species(RONS)in plasma-activated medium(PAM)were characterized to explore their chemical activity.Furthermore,we investigated the inactivation effect of air plasma jet on tumour cells and their corresponding inactivation mechanism.The results show that the tube diameter plays an important role in sustaining the voltage of the air plasma jet,and the gas flow rate affects the jet length and discharge intensity.Additionally,the air plasma jet discharge displays two modes,namely,ozone and nitrogen oxide modes at high and low gas flow rates,respectively.Increasing the voltage increases the concentration of reactive species and the length of discharge.By evaluating the viability of A549 cells under different parameters,the optimal treatment conditions were determined to be a quartz tube diameter of 4 mm,gas flow rate of 0.5 SLM,and voltage of 18 kV.Furthermore,an air plasma jet under the optimized conditions effectively enhanced the chemical activity in PAM and produced more aqueous RONS.The air plasma jet induced significant cytotoxicity in A549 cancer cells after plasma treatment.H2O2 and NO2 are regarded as key factors in promoting cell inactivation.The present study demonstrates the potential use of tumour cell therapy by atmospheric air PAM,which aids a better understanding of plasma liquid chemistry.     

Dynamics of plasma bullets by nanosecond pulsed micro-hollow cathode discharge within air

In this paper, the air plasma jet produced by micro-hollow cathode discharge(MHCD) is investigated. The discharge is powered by a positive nanosecond pulse high voltage supply. The waveforms of the discharge, the images of the jet, the evolution of the plasma bullet and the reactive species are obtained to analyze the characteristics of the MHCD plasma jet. It is found that the length of the plasma jet is almost proportional to the air flow rate of 2–6 slm. Two plasma bullets appear one after another during a single period of the voltage waveform, and both of the two plasma bullets are formed during the positive pulse voltage off. The propagation velocity of the two plasma bullets is on the order of several hundred m/s, which is approximate to that of the air flow. These results indicate that the gas flow has an important influence on the formation of this MHCD plasma jet.     

Discharge characteristics and reactive species production of unipolar and bipolar nanosecond pulsed gas-liquid discharge generated in atmospheric

In this paper,unipolar pulse (including positive pulse and negative pulse) and bipolar pulse voltage are employed to generate diffuse gas-liquid discharge in atmospheric N2 with a trumpet-shaped quartz tube.The current-voltage waveforms,optical emission spectra of excited state active species,FTIR spectra of exhaust gas components,plasma gas temperature,and aqueous H2O2,NO2-,and NO3-production are compared in three pulse modes,meanwhile,the effects of pulse peak voltage and gas flow rate on the production of reactive species are studied.The results show that two obvious discharges occur in each voltage pulse in unipolar pulse driven discharge,differently,in bipolar pulse driven discharge,only one main discharge appears in a single voltage pulse time.The intensities of active species (OH(A),and O(3p)) in all three pulsed discharge increase with the rise of pulse peak voltage and have the highest value at 200 ml min-1 of gas flow rate.The absorbance intensities of NO2 and N2O increase with the increase of pulse peak voltage and decrease with the increase of gas flow rate.Under the same discharge conditions,the bipolar pulse driven discharge shows lower breakdown voltage,and higher intensities of excited species (N2(C),OH(A),and O(3p)),nitrogen oxides (NO2,NO,and N2O),and higher production of aqueous H2O2,NO2-,and NO3-compared with both unipolar positive and negative discharges.     

Degradation of antibiotic contaminants from water by gas–liquid underwater discharge plasma

Antibiotic contamination adversely affects human health and ecological balance.In this study,gasliquid underwater discharge plasma was employed to simultaneously degrade three antibiotics,sulfadiazine(SDZ),tetracycline(TC),and norfloxacin(NOR),to address the growing problem of antibiotic contaminants in water.The effects of various parameters on the antibiotic degradation efficiency were evaluated,including the discharge gas type and flow rate,the initial concentration and pH of the solution,and...     

Compact High-Velocity Atmospheric Pressure Dielectric Barrier Plasma Jet in Ambient Air

In this paper,a non-thermal atmospheric pressure plasma jet at high streaming velocity operating with ambient air is highlighted.In the present technological approach,the employment of air poses a significant challenge.The high oxygen concentration in air results in a reduced concentration of reactive species in combination with a short species lifetime.The plasma jet assembly presented here contains a special dielectric barrier with a high secondary emission coefficient.In this way,the electron density and in turn the density of reactive species is increased.In addition,the plasma jet assembly is equipped with a short electrode.This leads to a higher voltage across the discharge gap and in turn to an increased density of reactive plasma species.The plasma jet is formed within and emitted by a small conical nozzle.A high-speed gas flow with gas velocity of 340 m/s was achieved at the end of the nozzle.In the jet the concentration of toxic and unwanted neutral plasma species like O_3 or NO_x is significantly reduced because of the shorter residence time within the plasma.The range of short-lived active plasma species is in turn considerably enhanced.The jet efficiency and action range measured through the oxidation of a test surface were determined by measuring the increase of surface tension of a polypropylene substrate via contact angle measurements after plasma treatment.Numerical modeling of the plasma plume indicates that oxygen atoms are in fact the main active species in the plasma plume.     

Characteristics of Atmospheric Pressure Rotating Gliding Arc Plasmas

In this work,a novel direct current (DC) atmospheric pressure rotating gliding arc (RGA) plasma reactor has been developed for plasma-assisted chemical reactions.The influence of the gas composition and the gas flow rate on the arc dynamic behaviour and the formation of reactive species in the N2 and air gliding arc plasmas has been investigated by means of electrical signals,high speed photography,and optical emission spectroscopic diagnostics.Compared to conventional gliding arc reactors with knife-shaped electrodes which generally require a high flow rate (e.g.,10-20 L/min) to maintain a long arc length and reasonable plasma discharge zone,in this RGA system,a lower gas flow rate (e.g.,2 L/min) can also generate a larger effective plasma reaction zone with a longer arc length for chemical reactions.Two different motion patterns can be clearly observed in the N2 and air RGA plasmas.The time-resolved arc voltage signals show that three different arc dynamic modes,the arc restrike mode,takeover mode,and combined modes,can be clearly identified in the RGA plasmas.The occurrence of different motion and arc dynamic modes is strongly dependent on the composition of the working gas and gas flow rate.     

Effects of Gas Flow Rate on the Discharge Characteristics of a DC Excited Plasma Jet

A direct current(DC) source excited plasma jet consisting of a hollow needle anode and a plate cathode has been developed to form a diffuse discharge plume in ambient air with flowing argon as the working gas.Using optical and electrical methods,the discharge characteristics are investigated for the diffuse plasma plume.Results indicate that the discharge has a pulse characteristic,under the excitation of a DC voltage.The discharge pulse corresponds to the propagation process of a plasma bullet travelling from the anode to the cathode.It is found that,with an increment of the gas flow rate,both the discharge plume length and the current peak value of the pulsed discharge decrease in the laminar flow mode,reach their minima at about1.5 L/min,and then slightly increase in the turbulent mode.However,the frequency of the pulsed discharge increases in the laminar mode with increasing the argon flow rate until the argon flow rate equals to about 1.5 L/min,and then slightly decreases in the turbulent mode.     

Degradation of sulfamethoxazole in water by dielectric barrier discharge plasma jet: influencing parameters,degradation pathway,toxicity evaluation

Sulfamethoxazole (SMX) is an antibiotic and widely present in aquatic environments, so it presents a serious threat to human health and sustainable development. A dielectric barrier discharge (DBD) plasma jet was utilized to degrade aqueous SMX, and the effects of various operating parameters (working gas, discharge power, etc) on SMX degradation performance were studied. The experimental results showed that the DBD plasma jet can obtain a relatively high degradation efficiency for SMX when the discharge power is high with an oxygen atmosphere, the initial concentration of SMX is low, and the aqueous solution is under acidic conditions. The reactive species produced in the liquid phase were detected, and OH radicals and O3 were found to play a significant role in the degradation of SMX. Moreover, the process of SMX degradation could be better fitted by the quasi-first-order reaction kinetic equation. The analysis of the SMX degradation process indicated that SMX was gradually decomposed and 4-amino benzene sulfonic acid, benzene sulfonamide, 4-nitro SMX, and phenylsulfinyl acid were detected, and thus three possible degradation pathways were finally proposed. The mineralization degree of SMX reached 90.04% after plasma treatment for 20 min, and the toxicity of the solution fluctuated with the discharge time but eventually decreased.     

The effect of gas additives on reactive species and bacterial inactivation by a helium plasma jet

In this paper,the influences of gas doping(O_2,N_2,Air)on the concentrations of reactive species and bactericidal effects induced by a He plasma jet are studied.Firstly,results show that gas doping causes an increase in voltage and a decrease in current compared with the pure He discharge under the same discharge power,which might be attributed to the different chemical characteristics of O_2 and N_2 and verified by the changes in the gaseous reactive species shown in the optical emission spectroscopy(OES) and Fourier transform infrared(FTIR)spectroscopy.Secondly,the concentrations of aqueous reactive oxygen species(ROS) and reactive nitrogen species(RNS) are tightly related to the addition of O_2 and N_2 into the working gas.The concentrations of aqueous NO_2~- and NO_3~- significantly increase while the concentrations of aqueous ROS decrease with the admixture of N_2.The addition of O_2 has little effect on the concentrations of NO_2~- and NO_3~- and pH values; however,the addition of O_2 increases the concentration of O_2~- and deceases the concentrations of H_2O_2 and OH.Finally,the results of bactericidal experiments demonstrate that the inactivation efficiency of the four types of plasma jets is He?+?O_2??He+AirHeHe+N_2,which is in accordance with the changing trend of the concentration of aqueous O_2~-.Simultaneously to the better understanding of the formation and removal mechanisms of reactive species in the plasma–liquid interaction,these results also prove the effectiveness of regulating the concentrations of aqueous reactive species and the bacteria inactivation effects by gas doping.     

Plasma activated water prepared by different plasma sources: physicochemical properties and decontamination effect on lentils sprouts

The pulsed corona discharge (CD) generated in contact with water and directly in water, and high-power air plasma jet (APJ) were studied for production of plasma activated water (PAW). The changes of physical (pH, redox potential, conductivity, temperature) and chemical (peroxides, nitrites, nitrates concentrations) properties of treated water were investigated. The comparison of CD generated in gas/water interface and underwater configuration in the same system showed that the interaction of reactive oxygen and nitrogen species formed in ambient air in gas/water system induces different chemical processes, leading to lower pH, higher oxidation-reduction potential (ORP) and higher conductivity of PAW than in underwater discharge. High yield of peroxide was observed in both configurations. The PAW prepared by APJ exhibits high concentration of nitrites and nitrates according to supplied energy, and related significant decrease of pH and increase of ORP and conductivity after treatment. The antimicrobial effect of PAW prepared by CD and plasma jet on lentils sprouts was studied in different treatment and washing times. The APJ appears to have great efficacy on water activation resulted in strong decontamination effect. The PAW treated by APJ for 10 min led to bacterial reduction from initial 8.3 to 5.9 and 4.0 log10 CFU g−1 after 10 and 30 min of washing, respectively.     

Evaluation on a double-chamber gas-liquid phase discharge reactor for benzene degradation

A double-chamber gas-liquid phase DBD reactor (GLDR), consisting of a gas-phase discharge chamber and a gas-liquid discharge chamber in series, was designed to enhance the degradation of benzene and the emission of NOx. The performance of the GLDR on discharge characteristics, reactive species production and benzene degradation was compared to that of the single-chamber gas phase DBD reactor (GPDR). The effects of discharge gap, applied voltage, initial benzene concentration, gas flow rate and solution conductivity on the degradation and energy yield of benzene in the GLDR were investigated. The GLDR presents a higher discharge power, higher benzene degradation and higher energy yield than that of the GPDR. NO₂ emission was remarkably inhibited in the GLDR, possibly due to the dissolution of NO₂ in water. The benzene degradation efficiency increased with the applied voltage, but decreased with the initial concentration, gas flow rate, and gas discharge gap, while the solution conductivity presented less influence on benzene degradation. The benzene degradation efficiency and the energy yield reached 61.11% and 1.45 g kWh^–1 at 4 mm total gas discharge gap, 15 kV applied voltage, 200 ppm benzene concentration, 0.2 L min⁻¹ gas flow rate and 721 μS cm⁻¹ water conductivity. The intermediates and byproducts during benzene degradation were detected by FT-IR, GC-MS and LC-MS primarily, and phenols, CO_x, and other aromatic substitutes, O₃, NO_x, etc, were determined as the main intermediates. According to these detected byproducts, a possible benzene degradation mechanism was proposed.     

Development of low power non-thermal plasma jet and optimization of operational parameters for treating dyes and emerging contaminants

Non-thermal plasma has emerged as an effective treatment system against the latest class of highly recalcitrant and toxic environmental pollutants termed emerging contaminants (ECs). In the present work, a detailed experimental study is carried out to evaluate the efficacy of a non-thermal plasma jet with two dyes, Rd. B and Met. Blue, as model contaminants. The plasma jet provided a complete dye decoloration in 30 min with an applied voltage of 6.5 kV_p−p. ·OH, having the highest oxidation potential, acts as the main reactive species, which with direct action on contaminants also acts indirectly by getting converted into H2O2 and O3. Further, the effect of critical operational parameters viz, sample pH, applied voltage (4.5‒6.5 kV_p−p), conductivity (5‒20 mS cm⁻¹), and sample distance on plasma treatment efficacy was also examined. Out of all the assessed parameters, the applied voltage and sample conductivity was found to be the most significant operating parameters. A high voltage and low conductivity favored the dye decoloration, while the pH effect was not that significant. To understand the influence of plasma discharge gas on treatment efficacy, all the experiments are conducted with argon and helium gases under the fixed geometrical configuration. Both the gases provided a similar dye decoloration efficiency. The DBD plasma system with complete dye removal also rendered maximum mineralization of 73% for Rd. B, and 60% for Met. Blue. Finally, the system's efficiency against the actual ECs (four pharmaceutical compounds, viz, metformin, atenolol, acetaminophen, and ranitidine) and microbial contaminant (E. coli) was also tested. The system showed effectivity in the complete removal of targeted pharmaceuticals and a log2.5 E. coli reduction. The present systematic characterization of dye degradation could be of interest to large communities working towards commercializing plasma treatment systems.     

Discharge characteristics and reactive species production of unipolar and bipolar nanosecond pulsed gas–liquid discharge generated in atmospheric N_2

In this paper,unipolar pulse (including positive pulse and negative pulse) and bipolar pulse voltage are employed to generate diffuse gas–liquid discharge in atmospheric N_2with a rumpetshaped quartz tube.The current–voltage waveforms,optical emission spectra of excited state active species,FTIR spectra of exhaust gas components,plasma gas temperature,and aqueous H_2O_2,NO_2~-,andNO_3~-production are compared in three pulse modes,meanwhile,the effects of pulse peak voltage and gas flow rate on the production of reactive species are studied.The results show that two obvious discharges occur in each voltage pulse in unipolar pulse driven discharge,differently,in bipolar pulse driven discharge,only one main discharge appears in a single voltage pulse time.The intensities of active species (OH(A),and O(3p)) in all three pulsed discharge increase with the rise of pulse peak voltage and have the highest value at 200 ml min~(-1)of gas flow rate.The absorbance intensities of NO_2and N_2O increase with the increase of pulse peak voltage and decrease with the increase of gas flow rate.Under the same discharge conditions,the bipolar pulse driven discharge shows lower breakdown voltage,and higher intensities of excited species (N_2(C),OH(A),and O(3p)),nitrogen oxides (NO_2,NO,and N_2O),and higher production of aqueous H_2O_2,NO_2~-,andNO_3~-compared with both unipolar positive and negative discharges.     

Degradation of tetracycline in water by gas-liquid plasma in conjunction with rGO-TiO2 nanocomposite

Tetracycline(TC)is an antibiotic mainly used in livestock production and respiratory infection.Traditional methods are not effective in removing TC from solution.In this study,TC was degraded by gas-liquid plasma in the presence of rGO-TiO2 in solution.The rGO-TiO2 was prepared by modified hummers and hydrothermal method.The electrical and optical properties of the gas-liquid discharge plasma were studied and the produced long-lived reactive species were analyzed by spectrophotometer.The degradation efficiency of TC was improved by 41.4％after plasma treatment for 12 min in presence of 30 mg l-1 rGO-TiO2 compared to that with plasma alone.The degradation efficiency increased with increasing discharge power,but as the initial concentration was increased from 20 to 80 mg l-1,the degradation efficiency of TC decreased.The initial pH had no significant effect on the degradation of TC.The intermediate products were determined by UV-vis spectrophotometry and ESI(+)-MS,and the degradation mechanism was analyzed.The reactive species,including O3,OH,and H2O2,etc.,produced in the plasma/catalyst system attracted electron-rich functional groups(amino group,aromatic ring,and double bond).Therefore,the gas-liquid plasma/catalyst system could be an effective and promising method for pharmaceutical wastewater treatment in future.     

Plasma jet array treatment to improve the hydrophobicity of contaminated HTV silicone rubber

An atmospheric-pressure plasma jet array specially designed for HTV silicone rubber treatment is reported in this paper. Stable plasma containing highly energetic active particles was uniformly generated in the plasma jet array. The discharge pattern was affected by the applied voltage. The divergence phenomenon was observed at low gas flow rate and abated when the flow rate increased.Temperature of the plasma plume is close to room temperature which makes it feasible for temperature-sensitive material treatment. Hydrophobicity of contaminated HTV silicone rubber was significantly improved after quick exposure of the plasma jet array, and the effective treatment area reached 120 mm?×?50 mm(length?×?width). Reactive particles in the plasma accelerate accumulation of the hydrophobic molecules, namely low molecular weight silicone chains, on the contaminated surface, which result in a hydrophobicity improvement of the HTV silicone rubber.     

OH and O radicals production in atmospheric pressure air/Ar/H2O gliding arc discharge plasma jet

Atmospheric pressure air/Ar/H_2O gliding arc discharge plasma is produced by a pulsed dc power supply. An optical emission spectroscopic(OES) diagnostic technique is used for the characterization of plasmas and for identifications of OH and O radicals along with other species in the plasmas. The OES diagnostic technique reveals the excitation Tx?≈?5550–9000 K, rotational Tr?≈?1350–2700 K and gas Tg?≈?850–1600 K temperatures, and electron density n?(1.1-1.9) ′101 4 cm~(-3) e under different experimental conditions. The production and destruction of OH and O radicals are investigated as functions of applied voltage and air flow rate. Relative intensities of OH and O radicals indicate that their production rates are increased with increasing Ar content in the gas mixture and applied voltage. nereveals that the higher densities of OH and O radicals are produced in the discharge due to more effective electron impact dissociation of H_2O and O_2 molecules caused by higher kinetic energies as gained by electrons from the enhanced electric field as well as by enhanced n e.The productions of OH and O are decreasing with increasing air flow rate due to removal of Joule heat from the discharge region but enhanced air flow rate significantly modifies discharge maintenance properties. Besides, Tgsignificantly reduces with the enhanced air flow rate. This investigation reveals that Ar plays a significant role in the production of OH and O radicals.     

Design,Construction and Characterization of AC Atmospheric Pressure Air Non-thermal Plasma Jet

This paper presents the design and construction of non-thermal plasma jet device which was built in plasma phys. Dept., NRC, AEA, Egypt with a plasma application group. This design will be useful to initiate research in different fields such as low temperature plasma, polymer and biomedical applications. The experimental operation of this device is conducted with power supply of (10 kV, 30 mA, and 20 kHz). The discharge process takes place by using Air as input gas with different flow rates. The experimental results showed that the maximum plasma jet length of 7 mm is detected at air flow rate of 12 L/min. The electrical characteristics of discharge at different flow rates of Air such as discharge voltage, current, mean power, power efficiency, and energy have been studied by using potential dividers and Lissajous figure techniques. The results of plasma jet temperature along the jet length showed that the jet plasma has approximately a room temperature at the end of jet column.     

A comparative study on the activity of TiO2 in pulsed plasma under different discharge conditions

In the present study,a combination of pulsed discharge plasma and TiO_2(plasma/TiO_2)has been developed in order to study the activity of TiO_2by varying the discharge conditions of pulsed voltage,discharge mode,air flow rate and solution conductivity.Phenol was used as the chemical probe to characterize the activity of TiO_2in a pulsed discharge system.The experimental results showed that the phenol removal efficiency could be improved by about 10%by increasing the applied voltage.The phenol removal efficiency for three discharge modes in the plasma-discharge-alone system was found to be highest in the spark mode,followed by the spark–streamer mode and finally the streamer mode.In the plasma/TiO_2system,the highest catalytic effect of TiO_2was observed in the spark–streamer discharge mode,which may be attributed to the favorable chemical and physical effects from the spark–streamer discharge mode,such as ultraviolet light,O_3,H_2O_2,pyrolysis,shockwaves and high-energy electrons.Meanwhile,the optimal flow rate and conductivity were 0.05 m~3l~(-1)and 10μS cm~(-1),respectively.The main phenolic intermediates were hydroquinone,catechol,and p-benzoquinone during the discharge treatment process.A different phenol degradation pathway was observed in the plasma/TiO_2system as compared to plasma alone.Analysis of the reaction intermediates demonstrated that p-benzoquinone reduction was selectively catalyzed on the TiO_2surface.The effective decomposition of phenol constant(D_e)increased from 74.11%to 79.16%when TiO_2was added,indicating that higher phenol mineralization was achieved in the plasma/TiO_2system.     

The influence of grounded electrode positions on the evolution and characteristics of an atmospheric pressure argon plasma jet

An atmospheric pressure plasma jet (APPJ) in Ar with various grounded electrode arrangements is employed to investigate the effects of electrode arrangement on the characteristics of the APPJ.Electrical and optical methods are used to characterize the plasma properties.The discharge modes of the APPJ with respect to applied voltage are studied for grounded electrodepositions of 10 mm,40 mm and 80 mm,respectively,and the main discharge and plasma parameters are investigated.It is shown that an increase in the distance between the grounded electrode and high-voltage electrode results in a change in the discharge modes and discharge parameters.The discharges transit from having two discharge modes,dielectric barrier discharge (DBD) and jet,to having three,corona,DBD and jet,with increase in the distance from the grounded to the high-voltage electrodes.The maximum length of the APPJ reaches 3.8 cm at an applied voltage of 8 kV.The discharge power and transferred charges and spectral line intensities for species in the APPJ are influenced by the positions of the grounded electrode,while there is no obvious difference in the values of the electron excited temperature (EET) for the three grounded electrode positions.