Spreading codes for direct sequence CDMA and wideband CDMA cellularnetworks

This article presents an overview of the spreading techniques for use in direct sequence CDMA cellular networks. We review the theoretical background for sequences used in CDMA and wideband CDMA, and discuss the main characteristics of the maximal length, Gold (1967, 1968), and Kasami sequences, as well as variable- and fixed-length orthogonal codes. We also describe different methods of multiple spreading for channelization and scrambling in CDMA and W-CDMA realizations     

Hybrid acquisition of direct sequence CDMA signals

In direct sequence code division multiple access (DS-CDMA) systems, signal acquisition is necessary before communication can commence. Recent work has shown that the problem of acquisition may be even more restrictive than the problem of error control in limiting the capacity and performance of these systems. Passive matched filters and parallel search schemes have been shown to be able to acquire signals rapidly, but they do so at the cost of high or prohibitive complexity. In contrast, straight serial search schemes have lower complexity but acquire the signal much more slowly. In this paper, we studyhybrid active correlation schemes that provide flexibility in the trade-off between acquisition speed and complexity. These techniques test several phases concurrently and either decide that a particular phase is correct, in which case the decision is verified by a binary hypothesis test, or that none of the phases are correct, in which case another group of phases is tested. Two new hybrid acquisition schemes are presented; the first is based on a fixed-sample-size weighted MAP test, and the second is based on anM-ary sequential hypothesis test called MSPRT. It is shown that the weighted MAP-based scheme hypothesis test called MSPRT. It is shown that the weighted MAP-based scheme outperforms a standard MAP-based scheme. It is also shown that considerable performance gain can be obtained using sequential testing. In particular, it is shown through numerical examples that MSPRT-based schemes are several times faster than corresponding fixed-sample-size schemes.This paper has been presented in part at the 1994 IEEE International Conference on Communications, New Orleans, Louisana, May 1–5, 1994.     

Low-complexity noncoherent PN code chip timing recovery with resistance to MAI for a bandlimited CDMA receiver

A noncoherent PN code tracking loop in a fully digital modem is investigated for bandlimited direct-sequence spread-spectrum communications. Its main features are low hardware complexity and good tracking performance. Analytical expressions of the error characteristics and steady-state timing jitter are derived and confirmed by means of computer simulation. The numerical results show that it achieves good steady-state performance. In addition, the proposed technique provides good resistance to multiple-access interference while operating in a code-division multiple-access environment.     

Dynamic signature assignment for direct sequence CDMA systems

Multiple access interference (MAI) is one of the major impediments in the reverse link of wide band CDMA systems, due to the synergy of the users' spreading codes, transmission delays and the channel characteristics. We propose to dynamically assign the users' spreading codes and transmission delays, i.e., to assign the user signature, in order to minimize mutual cross-correlations at the receiver. This dynamic signature assignment (DSA) approach helps to avoid (as opposed to combating) MAI at the base station. In assigning the signatures, we present a low-complexity iterative algorithm which utilizes channel information and is able to minimize signal-to-interference-plus-noise (SINR) ratio at receivers. Computer simulation results are presented which show a potential 2-3 fold capacity increase over conventional systems     

一种基于符号级均衡的CDMA接收机

在使用较短扩频码的CDMA系统中,多径干扰会破坏用户扩频码之间的正交性,Rake接收机性能会严重下降.本文提出了一种新的基于Rake的符号级均衡的CDMA接收机,通过分析推导出了基于最小均方误差准则的均衡系数.性能仿真结果表明这种接收机与传统的Rake接收机相比,比特误码率性能有很大的提高,可以有效抑制跨多个符号的多径干扰.     

A flexible receiver for CDMA multiuser communications

Code division multiple access (CDMA) capacity is limited by interference amongst users. The effect of this interference on receiver outputs depends on the users' signatures and the actual detector used in the receiver. A matched filter receiver is particularly sensitive to interference, whereas an optimum multiuser receiver is less sensitive but infeasible due to its exponential complexity. We propose a receiver structure that trades detection performance for reduced complexity. It can interpolate between the performances and complexities of these two receivers. Our detector uses a tree structure, and some of its special cases are the decision feedback detector, the decorrelating detector, and the optimal linear detector. We show that at equal complexity levels, a particular implementation of our detector outperforms these detectors. We also show that our approach can be used with a minimum-mean-square-error design criterion and coded CDMA transmission     

A linear receiver for coded multiuser CDMA

We consider a CDMA system with error-control coding. Optimal joint decoding is prohibitively complex. Instead, we propose a sequential approach for handling multiple-access interference and error-control decoding. Error-control decoding is implemented via single-user soft-input decoders utilizing metrics generated by linear algebraic multiuser metric generators. The decorrelator, and a new scheme termed the projection receiver, are utilized as metric generators. For a synchronous system, the coded performance of the projection receiver metric is shown to be superior to the decorrelator even though they are equally complex. Also, the theoretical degradation relative to the single user bound is derived     

A dual-b and RF front-end of direct conversion receiver for wireless CDMA cellular phones with GPS capability

A highly integrated direct conversion receiver for cellular code division multiple access (CDMA) and GPS applications is successfully developed using a 0.5-/spl mu/m SiGe BiCMOS technology. The receiver consists of two low-noise amplifiers (LNAs), a dual-band mixer, two voltage-controlled oscillators (VCOs), a local-oscillator signal generation block, and channel filters. The CDMA LNA achieves a noise figure of 1.3 dB, an input-referred third-order intercept point (IIP3) of 10.9 dBm, and a gain of 15.3 dB with a current consumption of 9.8 mA in the high-gain mode. The mixer for the CDMA mode achieves an uncalibrated input-referred second-order intercept point of 53.7 dBm, an IIP3 of 6.4 dBm, a noise figure of 7.2 dB and a voltage gain of 37.2 dB. The phase noise of the CDMA VCO is approximately -133 dBc/Hz at a 900-kHz offset from a 1.762-GHz operating frequency. It exceeds all the CDMA requirements when tested on a handset.     

A comparison of system performance using two different chip pulsesin multiple-chip-rate DS/CDMA systems

This paper describes a comparison of system performance using two different chip waveforms of spreading sequences in multiple-chip-rate (MCR) direct-sequence (DS)/code-division multiple-access (CDMA) systems. The chip pulses used in this study are closely related to the characteristics of output filter employed at transmitter. In general, the chip waveform is an important factor to determine the link performance. The raised cosine chip pulse with a roll-off factor of α will be adopted for IMT-2000 systems in order to reduce both the intersymbol effect and the spectral width of the modulated signal. However, due to the complexity of obtaining quantitative results on the performance of MCR-DS/CDMA systems, rectangular chip pulses are mainly utilized in performance analysis. Therefore, it is necessary to investigate the effect of the chip pulses used, i.e., a rectangular and a raised cosine chip pulses on system performance in order to evaluate MCR-DS/CDMA systems accurately. Thus, the effect of the chip pulses used on the performance in MCR-DS/CDMA systems is investigated in terms of the system capacity and blocking probability. It is shown that the system using a raised cosine chip pulse (i.e., RC system) supports at least 80% more capacity and 57% more traffic than that using a rectangular chip pulse (i.e., R system)     

A low-power, low-cost bipolar GPS receiver chip

A low-power, low-cost, integrated global positioning by satellite (GPS) receiver is described. It operates from a single 2.7-5.5 V supply with a nominal current consumption of only 27 mA. Furthermore, there is no need for expensive external surface acoustic wave (SAW) filters or a radio frequency voltage-controlled oscillator (VCO) module; only a low frequency reference clock (temperature compensated crystal oscillator (TCXO) or crystal), varactor diodes and standard passive elements are necessary for full operation. The chip is compatible with baseband chips requiring 1 fo (1.023 MHz) and 4 fo signal frequencies. The device has been integrated using a 15-GHz silicon bipolar technology     

A beamspace-time interference cancelling CDMA receiver for sectoredcommunications in a multipath environment

A beamspace-time (BT) receiver is proposed for interference suppression and multipath diversity reception in sectored wireless code division multiple access communications. The scheme involves two stages. First, a set of adaptive space-time diversity processors, in the form of beamformer-correlator pairs, is constructed which provides effective suppression of unwanted interference and reception of signals from a prescribed space-time region. Second, the output data obtained by these processors are maximum ratio combined to capture the signal multipath components coherently. The proposed BT receiver is blind in that no training signal is required. The only information required is the signature sequence, timing and a rough estimate of the angle of arrival of the signal for selecting the sector of interest     

A RAKE-based iterative receiver for space-time block-coded multipath CDMA

A turbo multiuser receiver is proposed for space-time block and channel-coded code division multiple access (CDMA) systems in multipath channels. The proposed receiver consists of a first stage that performs detection, space-time decoding, and multipath combining followed by a second stage that performs the channel decoding. A reduced complexity receiver suitable for systems with large numbers of transmitter antennas is obtained by performing the space-time decoding along each resolvable multipath component and then diversity combining the set of space-time decoded outputs. By exchanging the soft information between the first and second stages, the receiver performance is improved via iteration. Simulation results show that while in some cases a noniterative space-time coded system may have inferior performance compared with a system without space-time coding in a multipath channel, proposed iterative schemes significantly outperform systems without space-time coding, even with only two iterations. Furthermore, the performance loss in the reduced-complexity receiver due to decoupling of interference suppression, space-time decoding, and multipath combining is very small for error rates of practical interest.     

多径CDMA信道下一种新的RLS空时接收机

针对多径CDMA信道下的多用户检测中出现的线性约束二次规划问题提出一种新的递归最小二乘算法，该算法可以完全避免因约束而引进的矩阵求逆运算(相对常规的递归最小二乘算法)，并将这种算法与CDMA多用户系统结合起来给出了一种新的自适应接收机，仿真结果表明了这种算法是有效的(无论在检测性能上还是在收敛性能上)。     

A CDMA2000 zero-IF receiver with low-leakage integrated front-end

This paper describes a highly integrated CDMA 2000 US-CEL band (880-MHz) receiver. The single-chip zero-IF design incorporates all receiver signal-path functions including the low-noise amplifier (LNA) on a single die. The complete receiver design exceeds the stringent linearity and local oscillator (LO) leakage requirements for this standard arising from the coexistence with narrow-band FM signals. The integrated LNA achieves 1.0-dB noise figure with +9-dBm IIP3 at high gain, and by maintaining LO leakage to the antenna port well below -80 dBm at all gain settings, no external LNA is required. The receiver is fabricated in a 0.25-/spl mu/m 40-GHz f/sub t/ BICMOS technology, and occupies 3 mm/sup 2/.     

A direct conversion receiver with an IP2 calibrator for CDMA/PCS/GPS/AMPS applications

A second-order intercept point (IP2) calibration technique is developed using common-mode feedback (CMFB) circuitry in a direct-conversion receiver for wireless CDMA/PCS/GPS/AMPS applications. The IP2 calibrator is capable of providing different CMFB gain to tune its common-mode output impedance for each of the positive and negative mixer outputs. The CDMA mixer applying this method achieved a second-order input intercept point (IIP2) of 64 dBm, a third-order input intercept point (IIP3) of 4 dBm, a noise figure of 6.5 dB and a voltage gain of 42.2 dB. This result shows a 20 dB improvement from an uncalibrated IIP2 of 44 dBm. The receiver RFIC is implemented in a 0.5-/spl mu/m SiGe BiCMOS process, and it operates from a 2.7 to 3.1 V single power supply.     

A time-interleaved recursive loop band-pass delta-sigma modulator for a digital IF CDMA receiver

A bandpass delta-sigma modulator (BPDSM) is a key building block to implement a digital intermediate frequency (IF) receiver in a wireless communication system. This paper proposes a time-interleaved (TI) recursive loop BPDSM architecture that consists of five-stage TI blocks for a code-division multiple-access (CDMA) receiver. The proposed TI BPDSM provides reduction in the clock frequency requirement by a factor of 5 and relaxes the settling time requirement to one-fourth of the conventional approach. The test chip was designed and fabricated for a 30-MHz IF system with a 0.35-/spl mu/m CMOS process. The measured peak SNR for a 1.25-MHz bandwidth is 48 dB while dissipating 75 mW from a 3.3-V supply and occupying 1.3 mm/sup 2/.     

A decorrelating RAKE receiver for CDMA communications overfrequency-selective fading channels

Previous studies showed that multiuser detection in code-division multiple-access (CDMA) communications can be performed without explicit knowledge of users' channel characteristics in a frequency-selective fading environment. However, the computations of these blind approaches are an order of magnitude higher than existing adaptive minimum output energy (MOE) receivers which require at least knowledge of the desired user's channel response. Although the high-complexity problem can be alleviated by constrained adaptive filtering, the tradeoff is a significant drop in receiver performance, especially when the multipath pattern is time varying. In this paper, we present an adaptive receiver for CDMA communications over frequency-selective, and possibly time-varying, wireless channels. A salient feature of the new receiver is that it has complexity and performance comparable to that of the well-known MOE receivers, and yet requires no knowledge of the desired user's channel characteristics     

A spatial-temporal decorrelating receiver for CDMA systems withbase-station antenna arrays

We investigate multiuser signal detection with a base-station antenna array for a synchronous DS-CDMA uplink using nonorthogonal codes in Rayleigh fading channels. We have developed a new formulation for a spatial-temporal decorrelating detector using the maximum-likelihood criteria. The detector is shown to be near-far resistant. We propose to implement the spatial-temporal decorrelating receiver iteratively by applying the space-alternating generalized expectation-maximization (SAGE) algorithm. Simulation results show that the SAGE-based decorrelating receiver significantly outperforms the conventional single-user receiver and with performance close to that of a spatial-temporal decorrelating receiver with known channel parameters. We have observed that adding base-station antennas can actually improve convergence of the proposed iterative receiver     

A new receiver structure for asynchronous CDMA: STAR-thespatio-temporal array-receiver

We propose a spatio-temporal array-receiver (STAR) for asynchronous code division multiple access (CDMA), using a new space/time structural approach. First, STAR performs blind identification and equalization of the propagation channel from each mobile transmitter. Second, it provides fast and accurate estimates of the number, relative magnitude, and delay of the multipath components. From this space/time separation, STAR reconstructs the identified channel with respect to a partially revealed space/time structure and reduces identification errors by the order of the ratio of the processing gain and the number of paths. Therefore, STAR offers a high potential for increasing capacity, with relatively low computational complexity. Simulations confirm the good multipath acquisition and tracking properties of STAR in the presence of strong interference and fast Doppler     

A receiver of simple structure for antenna array CDMA systems

In code division multiple access systems, the two-dimensional (2-D) RAKE structure had been proposed using multiple antennas to increase the capacity. It consists of multiple fingers of a beamformer and a correlator. In this paper, we consider a simpler receiver structure. We only use one finger, which consists of one pair of spatial and temporal filters to combine signals. It is shown that the performance of the receiver system is comparable with that of the 2-D RAKE receiver. Furthermore, it is observed that the proposed receiver and the 2-D RAKE receiver have limited near-far resistance by the generation of the space domain due to antenna arrays