Controllable synthesis of porous CxNy nanofibers with enhanced electromagnetic wave absorption property

Porous C_xN_y nanofibers are controllably synthesized by a simple two-step method. The prepared samples possess uniform micropores and a chemical composition of C_0.73 N_0.27 with a surface area of 329 m² g⁻¹. The obtained C_xN_y nanofibers exhibit remarkable electromagnetic (EM) wave absorption properties when compared with conventional one-dimensional carbon materials. The minimum reflection loss (RL) reaches −36 dB at 2.7 GHz when the ratio of the C_xN_y absorbent added in paraffin matrix is only 1:3. The bandwidth of the RL below −10 dB covers 7.7 GHz (8.1–15.8 GHz) at the sample thickness of 2.5 mm. A possible EM wave loss mechanism was proposed in detail. The multiple reflection and dielectric loss could govern the excellent EM absorption leading the product to a probable application in stealth materials.     

Fabrication and microwave absorption properties of magnetite nanoparticle–carbon nanotube–hollow carbon fiber composites

Absorbents with “tree-like” structures, which were composed of hollow porous carbon fibers (HPCFs) acting as “trunk” structures, carbon nanotubes (CNTs) as “branch” structures and magnetite (Fe₃O₄) nanoparticles playing the role of “fruit” structures were prepared by chemical vapor deposition technique and chemical reaction. Microwave reflection loss, permittivity and permeability of Fe₃O₄–CNTs–HPCFs composites were investigated in the frequency range of 2–18 GHz. It was proven that prepared absorbents possessed the excellent electromagnetic wave absorbing performances. The bandwidth with a reflection loss less than −15 dB covers a wide frequency range from 10.2 to 18 GHz with the thickness of 1.5–3.0 mm, and the minimum reflection loss is −50.9 dB at 14.03 GHz with a 2.5 mm thick sample layer. Microwave absorbing mechanism of the Fe₃O₄–CNTs–HPCFs composites is concluded as dielectric polarization and the synergetic interactions exist between Fe₃O₄ and CNTs–HPCFs.     

Doping behaviors of NiO and Nb2O5 in BaTiO3 and dielectric properties of BaTiO3-based X7R ceramics

Doping behaviors of NiO and Nb₂O₅ in BaTiO₃ in two doping ways and dielectric properties of BaTiO₃-based X7R ceramics were investigated. When doped in composite form, the additions rendered higher solubility than that doped separately due to the identical valence between the complex (Ni_1/3²⁺Nb_2/3⁵⁺)⁴⁺ and Ti⁴⁺. NiO–Nb₂O₅ composite oxide was more effective in broadening dielectric constant peaks which was responsible for the temperature-stability of BaTiO₃ ceramics. A reduction in grain size was observed in the specimens with 0.5–0.8 mol% NiO–Nb₂O₅ composite oxide, whereas the abnormal growth of individual grains took place in the 1.0 mol% NiO–Nb₂O₅ composite oxide-doped specimen. When the specimen of BaTiO₃ doped with 0.8 mol% NiO–Nb₂O₅ composite oxide was sintered at 1300 °C for 1.5 h in air, good dielectric properties were obtained and the requirement of (EIA) X7R specification with a dielectric constant of 4706 and dielectric loss lower than 1.5% were satisfied.     

Dielectric and electromagnetic wave absorption properties of reduced graphene oxide/barium aluminosilicate glass–ceramic composites

BaAl₂Si₂O₈ (BAS) glass–ceramic powders were prepared by sol–gel method. Graphene oxide (GO)/BAS mixture powders were prepared by a simple mixing process of GO and BAS. Dense and uniform reduced graphene oxide (RGO)/BAS composites were fabricated by the hot-pressing of GO/BAS, which was accompanied by the in-situ thermal reduction of GO. Microstructure, phase composition, dielectric and electromagnetic wave (EM) absorption properties of RGO/BAS were investigated. The results reveal that RGO can promote the hexacelsian-to-celsian phase transformation of BAS. In the frequency range from 8 GHz to 12 GHz, the complex permittivity of RGO/BAS increases with increasing RGO content. The composite with 1.5 wt% of RGO shows good EM absorbing ability. When the sample thickness is 2.1 mm, the minimum reflection coefficient (RC) reaches −33 dB, and the effective absorption bandwidth is more than 3.1 GHz.     

Electromagnetic wave absorption properties of graphene modified with carbon nanotube/poly(dimethyl siloxane) composites

By using a catalytic growth procedure, carbon nanotubes (CNTs) are in situ formed on reduced graphene oxide (RGO) sheet at 600 °C. CNTs growing on RGO planes through covalent C–C bond possess lower interfacial contact electrical resistance. As a hybrid structure, the CNTs/graphene (CNT/G) are well dispersed into poly (dimethyl siloxane). The hybrid combining electrically lossy CNTs and RGO, which disperses in electrically insulating matrix, constructs an electromagnetic wave (EM) absorbing material with ternary hierarchical architecture. The interfacial polarization in heterogeneous interface plays an important role in absorbing EM power. When the filler loading is 5 wt.% and thickness of absorber is 2.75 mm, the minimum value of reflection coefficient and the corresponding frequency are −55 dB and 10.1 GHz, and the effective absorption bandwidth reaches 3.5 GHz. Therefore, combining the CNTs and graphene sheet into three-dimensional structures produces CNT/G hybrids that can be considered as an effective route to design light weight and high-performance EM absorbing material, while the effective EM absorption frequency can be designed.     

Synthesis of hierarchical core-shell NiFe2O4@MnO2 composite microspheres decorated graphene nanosheet for enhanced microwave absorption performance

A ternary functional composite NiFe₂O₄@MnO₂@graphene was synthesized successfully via a facile method. The phase constitution, microstructures, morphologies and chemical compositions of the samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) and X-ray photoelectron spectroscopy (XPS). It was observed that the NiFe₂O₄ nanoparticles were coated by hierarchically MnO₂ shells and distributed on the surface of graphene. Investigations of EM wave absorption indicated that NiFe₂O₄@MnO₂@ graphene composite has the strongest reflection loss of −47.4 dB at 7.4 GHz at the matching thickness of 3 mm, compared to NiFe₂O₄ and NiFe₂O₄@MnO₂, and its maximum absorption bandwidth (<−10 dB) is 4.3 GHz (from 5.1 to 9.4 GHz). The enhanced microwave absorption performance can be attributed to the hierarchical structure of MnO₂, void space between MnO₂ and graphene, and better impedance matching of ternary composite. The above results indicate that the novel hierarchical NiFe₂O₄@MnO₂@graphene composite, with intense absorption and wide absorption bandwidth, would be a promising absorber with less EM wave interference.     

The dielectric properties of BaTiO3 based ceramics co-doped with Bi/Mn

BaTiO₃ based ceramics (with some additives such as ZrO₂, SnO₂, etc.) were prepared by solid state reaction. Mn²⁺ or Mn³⁺ as an acceptor substituting for Ti⁴⁺ in B site and Bi³⁺ as a donor substituting for Ba²⁺ in A site were co-doped in BaTiO₃ based ceramics. The dielectric properties of BaTiO₃ based ceramics co-doped with Bi/Mn were investigated. The results show that the dielectric properties of BaTiO₃ based ceramics co-doped with Bi/Mn are affected by the mole ratio of donor and acceptor (Bi/Mn). When the mole ratio of donor and acceptor is high, dielectric dispersion behavior was observed and the dielectric constant decrease and remnant polarization, coercive field and piezoelectric constant will varied. When Bi varied from 1.0% to 2.0 mol% (Mn = 0.8 mol%), remnant polarization from 10.35 to 2.25 μC/cm², coercive field from 4 to 2.75 kV/cm, and piezoelectric constant d₃₃ from 137 to 36 pC/N respectively.     

Multiwalled carbon nanotubes–BaTiO3/silica composites with high complex permittivity and improved electromagnetic interference shielding at elevated temperature

Composites with silica matrix and mixed filler of multiwalled carbon nanotubes (MWCNTs) and BaTiO₃ powder were fabricated. Excellent uniform dispersion of MWCNTs can be obtained using a two-step mixing method. Both of the real and imaginary parts of complex permittivity increased with increasing MWCNT content and measured temperature. The electromagnetic interference (EMI) shielding results showed that the absorption mechanism is the main contribution to the total EMI shielding effectiveness (SE). Compared with the EMI SE resulting from reflection, the absorption showed more dependence on the MWCNT content, measured temperature and frequency. The total EMI SE is greater than 20 dB at 25 °C and 50 dB at 600 °C in the whole frequency range of 12.4–18 GHz with a 1.5 mm composite thickness, which suggests that the MWCNT–BaTiO₃/silica composites could be good candidates for the EMI shielding materials in the measured frequency and temperature region.     

Nano-sized Ag–BaTiO3 composite powders with various amount of Ag prepared by spray pyrolysis

The preparation of precursors of BaTiO₃ nanopowders with various amounts of Ag by spray pyrolysis is reported. The precursor powders obtained with hollow and thin-wall particles are composed of uniformly dispersed Ba, Ti, and Ag components. After post-treatment and a simple milling process, the precursor powders, irrespective of the amount of Ag, are transformed into Ag–BaTiO₃ composite nanoparticles. The mean particle size of the Ag (10 mol%)–BaTiO₃ powders is 142 nm. BaTiO₃ pellets containing Ag exhibit dense structures even at a low sintering temperature of 1000 °C. BaTiO₃ pellets with 10 mol% Ag show the highest dielectric constant of 2950, as opposed to the pure BaTiO₃ pellets (without Ag), whose dielectric constant is 1827.     

Structural,dielectric and optical analysis of Li1.1−yNb0.9-3yTi0.1+4yO3 M-phase solid solutions

The present paper reports the structural, dielectric and optical analysis of the M-phase Li_1.1−yNb_0.9-3yTi_0.1+4yO₃ (y=0.00, 0.045, 0.09, 0.11, 0.135) solid solutions in the Li₂O–Nb₂O₅–TiO₂ ternary system prepared by conventional solid state reaction method. High density (relative density>91%) ceramics were obtained by sintering the solid solutions at 1100 °C. XRD spectra revealed these ceramics to exhibit hexagonal structure and the superstructure formation was observed for higher Ti content (≥28 mol%) samples. Plate-like shape and closely packed grains were formed with low porosity (≤10%). Particle size was obtained in the range of 392–235 nm using TEM images. Relative permittivity changed from 46 to 31 while temperature coefficient of resonant frequency ranged from −93.5 to 57.5 at 1 MHz frequency. The maximum photoluminous intensity of 203.13 for the emission peak at 453 nm (blue emission) was observed for the sample y=0.00.     

Dielectric and microwave absorption properties of polymer derived SiCN ceramics annealed in N2 atmosphere

Porous SiCN ceramics were successfully fabricated by pyrolysis of a kind of polysilazane. The effects of annealing temperature on the microstructure evolution, direct-current electrical conductivity, dielectric properties, and microwave absorption properties of SiCN in the frequency range 8.2–12.4 GHz (X-band) were investigated. With the increase of annealing temperature, SiC, Si₃N₄ and free carbon nanodomains are gradually formed in the SiCN. Both the SiC and free carbon nanodomains lead to the increases of the complex relative permittivity and loss tangent of SiCN. With the increase of the annealing temperature, the average real permittivity, imaginary permittivity and loss tangent increase from 4.4, 0.2 and 0.05 to 13.8, 6.3 and 0.46, respectively. The minimum reflection coefficient and the frequency bandwidth below −10 dB for SiCN annealed at 1500 °C are −53 dB and 3.02 GHz, indicating good microwave absorption properties.     

Control of coring effect in BaTi4O9 microwave dielectric ceramics by doping with Mn4+

In the present work, we have attempted to reduce the effect of coring effect in the titanate ceramic system BaTi₄O₉ (BT4) by doping it with Mn⁴⁺. The microwave dielectric BaTi₄O₉ ceramics doped with 0, 0.5 and 1.0 mol% Mn⁴⁺ were synthesized by conventional ceramic processing route. The XRD studies confirmed a single phase crystalline structure for all the ceramic samples studied. The SEM micrographs of the ceramics reveal a microstructural change leading towards a more uniform grain size distribution as the Mn⁴⁺ content increases to 1.0 mol%. In the low frequency region (100 Hz to 1 MHz), the temperature stability of dielectric properties exhibits a marked improvement with the increasing amount of Mn⁴⁺ in the ceramic system. In the microwave frequency region (9.3 GHz), Q-factor increases from 11,625 GHz to 46,500 GHz for BaTi₄O₉ ceramic doped with 1.0 mol% Mn⁴⁺. The present paper reveals that the commonly observed degradation of dielectric properties due to coring effect in the BaTi₄O₉ ceramic system can be controlled by doping it with an appropriate quantity of Mn⁴⁺.     

A novel low-firing microwave dielectric ceramic Li2ZnGe3O8 with cubic spinel structure

A Li₂ZnGe₃O₈ ceramic was investigated as a promising microwave dielectric material for low-temperature co-fired ceramics applications. Li₂ZnGe₃O₈ ceramic was prepared via the conventional solid-state method. X-ray diffraction data shows that Li₂ZnGe₃O₈ ceramic crystallized into a cubic spinel structure with a space group of P4₁32. Dense ceramic with a relative densities of 96.3% were obtained when sintered at 945 °C for 4 h and exhibited the optimum microwave properties with a relative permittivity (ε_r) of 10.3, a quality factor (Q × f) of 47,400 GHz (at 13.3 GHz), and a temperature coefficient of resonance frequency (τ_f) of −63.9 ppm/°C. The large negative τ_f of Li₂ZnGe₃O₈ ceramic could be compensated by rutile TiO₂, and 0.9Li₂ZnGe₃O₈–0.1TiO₂0·1TiO₂ ceramic sintered at 950 °C for 4 h exhibited improved microwave dielectric properties with a near-zero τ_f of −1.6 ppm/°C along with ε_r of 11.3 and a Q × f of 35,800 GHz (11.6 GHz). Moreover, Li₂ZnGe₃O₈ was found to be chemically compatible with silver electrode when sintered at 945 °C.     

Fabrication of lanthanum doped BaTiO3 fine-grained ceramics with a high dielectric constant and temperature-stable dielectric properties using hydro-phase method at atmospheric pressure

Lanthanum doped BaTiO₃ powders were synthesized by the hydro-phase method at atmospheric pressure, which controls the uniformity and particle size of the ceramic powders. The effects of La³⁺ ions concentration on the microstructure and dielectric properties of BaTiO₃ ceramics were studied. The results suggested that both the average grain size and dielectric constants (ε_r and ε_max) of the ceramics decreased as the concentration of La³⁺ increased. The ceramic met the X8R specifications: La³⁺ ions concentration of 3 mol%, a permittivity of 2322, low dielectric loss of less than 0.6% at room temperature, and average grain size of about 260 nm.     

Coupling CoFe2O4 and SnS2 nanoparticles with reduced graphene oxide as a high-performance electromagnetic wave absorber

The reduced graphene oxide (RGO)/CoFe₂O₄/SnS₂ composites have been successfully synthesized by two-step hydrothermal processes. TEM results show that CoFe₂O₄ and SnS₂ nanoparticles with both diameters about 5–10 nm are well dispersed on the surface of graphene. Compared with RGO/CoFe₂O₄ composites, the as-prepared RGO/CoFe₂O₄/SnS₂ composites exhibit excellent electromagnetic (EM) wave absorption properties in terms of both the maximum reflection loss and the absorption bandwidth. The maximum reflection loss of RGO/CoFe₂O₄/SnS₂ composites is −54.4 dB at 16.5 GHz with thickness of only 1.6 mm and the absorption bandwidth with the reflection loss below −10 dB is up to 12.0 GHz (from 6.0 to 18.0 GHz) with a thickness in the range of 1.5–4.0 mm. And especially, they cover the whole X band (8.0–12.0 GHz), which could be used for military radar and direct broadcast satellite (DBS).     

Investigation on ferromagnetic and ferroelectric properties of (La,K)-doped BiFeO3–BaTiO3 solid solution

Multiferroic materials of BiFeO₃–BaTiO₃ solid solution have been fabricated in order to improve ferromagnetic and ferroelectric properties. The effects of La (1 mol%) and K (varied from 0.5–5 mol%) doped 0.75BiFeO₃–0.25BaTiO₃ on phase formation, ferromagnetic and ferroelectric properties have been investigated and discussed. The rhombohedral perovskite phase of specimens was characterized by XRD technique. Fracture morphology reveals the grain growth characteristics with increasing K content. (La, K)-doped 0.75BiFeO₃–0.25BaTiO₃ with La=1 mol% and K=3 mol% exhibits the highest remnant polarization and remnant magnetization.     

Effect of Li2O–V2O5 on the low temperature sintering and microwave dielectric properties of Li1.0Nb0.6Ti0.5O3 ceramics

Li₂O–Nb₂O₅–TiO₂ based ceramic systems have been the candidate materials for LTCC application, due to their high dielectric constant and Q × f value and controllable temperature coefficient in the microwave region. However, the sintering temperature was relatively higher (above 1100 °C) for practical application. In this study, dielectric properties of Li_(1+x−y)Nb_(1−x−3y)Ti_(x+4y)O₃ solid solution were studied with different x and y contents and among them, the Li_1.0Nb_0.6Ti_0.5O₃ composition (x = 0.1, y = 0.1) was selected, due to its reasonable dielectric properties to determine the possibility of low temperature sintering. The effects of 0.17Li₂O–0.83V₂O₅, as a sintering agent, on sinterability and microwave dielectric properties of Li_1.0Nb_0.6Ti_0.5O₃ ceramics were investigated as a function of the sintering agent content and sintering temperature. With addition of 0.17Li₂O–0.83V₂O₅ above 0.5 wt%, the specimens were well densified at a relatively lower temperature of 850 °C. Only slight decrease in apparent density was observed with increasing 0.17Li₂O–0.83V₂O₅ content above 0.75 wt%. In the case of 0.5 wt% 0.17Li₂O–0.83V₂O₅ addition, the values of dielectric constant and Q × f reached maximum. Further addition caused inferior microstructure, resulting in degraded dielectric properties. For the specimens with 0.5 wt% 0.17Li₂O–0.83V₂O₅ sintered at 850 °C, dielectric constant, Q × f and TCF values were 64.7, 5933 GHz and 9.4 ppm per °C, respectively.     

Dielectric properties of alumina doped with TiO2 from 13 to 73 GHz

Recent studies show that alumina doped with TiO₂ exhibits promising dielectric properties, corresponding to low loss tangents and low temperature coefficients (or close to 0 ppmC⁻¹). This paper aims to confirm these trends and study the dielectric properties of alumina doped with TiO₂ from 0.5% to 12% wt. at high frequency, 13–73 GHz. This work demonstrates that alumina doped with TiO₂ corresponds to potential materials for frequency converter devices working at a high frequency (up to 50 GHz).     

Double-layer electromagnetic wave absorber based on barium titanate/carbon nanotube nanocomposites

The electromagnetic wave absorption properties of double-layer barium titanate/carbon nanotube (BTO/CNT) nanocomposites were evaluated. The BTO/CNT nanomaterials were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and field emission scanning electron microscopy. The reflection loss (R.L.) of the samples was calculated based on the measured complex permittivity and permeability. The minimum R.L. of single-layer BTO/CNT 30 wt% nanocomposites sample with a thickness of 1.1 mm reached ~−30.3 dB (over 99.9% absorption) at 13.8 GHz, and the bandwidth of the reflection loss less than −10 dB (over 90% absorption) was 1.5 GHz. The double-layer composites consist of BTO/CNT 30 wt% (absorption layer) with thickness of 1.0 mm and BTO 30 wt% (matching layer) with thickness of 0.3 mm showed a minimum R.L. of ~−63.7 dB (over 99.9999% absorption) at 13.7 GHz, and the bandwidth of the reflection loss less than −10 dB was 1.7 GHz. Wider response bandwidth, >1.7 GHz also can be achieved with different designs of double-layer absorbers. The R.L. significantly improved and wider response bandwidth can be obtained with double-layer composites. The capability to modulate the absorption and bandwidth of these samples to suit various applications in different frequency bands indicates that these nanocomposites could be an excellent electromagnetic wave absorber.     

Temperature stable and high-Q microwave dielectric ceramics in the Li2Mg3−xCaxTiO6 system (x=0.00–0.18)

Microwave dielectric properties of Li₂Mg_3−xCa_xTiO₆ (x=0–0.18) ceramics were studied using a conventional solid-state route to find temperature stable and high Q microwave ceramics. As the calcination temperature was 500 °C, the Li₂TiO₃ phase with monoclinic rock salt structure in C2/c space group started to form. When the samples were calcined from 600 °C to 900 °C, the XRD patterns exhibited a remarkable chemical reaction between the MgO and Li₂TiO₃ phases, which eventually formed the Li₂Mg₃TiO₆ phase. The results indicated the Li₂Mg₃TiO₆and CaTiO₃ co-existed with each other and formed a stable composite system when the calcium content was added. The SEM photographs indicated that the pores caused by the Li evaporation could be effectively reduced due to the appearance of CaTiO₃. As x was increased from 0 to 0.18, the relative density was significantly improved due to the elimination of pores. As the Ca content increased, the dielectric constant (εr) increased from 14.8 to 20.6; the quality factor (Q×f) decreased from 148,713 GHz to 79,845 GHz, and the temperature coefficient of resonant frequency (τf) significantly increased from −42.4 to +10.8 ppm/°C due to the increased amount of CaTiO₃. Therefore, at x=0.12, the LMCxT ceramics sintered at 1280 °C for 6 h displayed excellent comprehensive properties of εr=17.8,Q×f=102,246 GHz and τf=−0.7 ppm/°C.