用∑WESH图评价某涂料化工厂的可持续性

介绍了在清洁生产过程中用∑WESH图评价涂料化工厂的可持续发展的原理及方法,并进行了一个实例的评价.从该厂的∑WESH图得出该厂的水及能源的利用率高,所用的原材料的稀缺性都不大,唯一较严重的问题是二甲苯的通过量大,危害性较严重.因此建议该厂在配方上尽量减少二甲苯的使用,开发新产品.     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

香叶油的研究进展

为了全面了解香叶油的研究现状,为我国香叶油的开发利用提供思路, 综述了香叶的栽培、组培技术研究、香叶油的应用、香叶油的提取及化学成分研究、香叶油调配研究等方面的现状,并对香叶品种的遗传改良提出一些有益的建议.     

胶原纤维的性能特点和作用

1胶原纤维巴西Novaprom胶原纤维是以精选的牛皮内剖层(真皮)组织提取的,它不同于明胶或明胶的衍生物。它的生产是在严格控制的时间和温度范围内进行的,从而确保其主要成分──胶原蛋白的活性不变,并以天然纤维的形式存在。它在肉制品中的结构呈纤维状而不是一般的胶冻,因而这种结构是非常稳定的,是不可逆的。它是很好的功能性动物纤维蛋白,在肉制品及鱼糜制品等相关的食品中得到广泛的应用。2胶原纤维的性能及相关指标(1)蛋白质含量:胶原纤维中的动物蛋白质(M×6.25)高达98%,含有人体必需的氨基酸。(2)吸水、持水性:胶原纤维结构良好,呈矩…     

鲜为人知的科学珍闻

有言在先,珍闻的挑选奉行以下原则:科学应该是有趣的,科学之所以好玩,部分原因在于你了解、知道这些奇谈怪论的存在。科学的伟大之处在于,它不必是教条的、有价值的实验,也不要求对所有理论进行最准确的过滤以得     

玻璃纤维拉丝池窑配合料设备研制的进展

玻璃纤维池窑拉丝生产线配合料的制备中,原料是形成优质玻璃液的基础,因此可以说配合料的稳定性、均匀性和准确性对玻璃纤维的质量起着决定的作用.生产实践证明:组分和粒度均匀的配合料,不但能强化玻璃液的熔化和澄清过程,而且还能减少或消除影响玻璃质量的各种弊病.所以认真拟定玻璃纤维原料的成分和选择玻璃纤维的种类和化学性质:严格控制进厂原料化学成分、粒度和水份;做好原料的分堆、存放、加工、称量、混合、输送是优质配合料制备不可缺少的手段,这也是做好玻璃纤维池窑配合料的基本任务.     

氢氧化镁阻燃剂的研究进展

主要论述了国内外阻燃剂的种类和发展,指出由于环境和健康的原因,无机阻燃剂是最有发展前途的,其中的氢氧化镁因其特有的性质,在无机阻燃剂中尤为突出.考虑到氢氧化镁的广泛应用的前景和其本身的缺点,对其改性成为业界的研究重点,其中主要介绍了钛酸酯、硬脂酸(盐)、镁盐晶须和胶囊化等技术,指出以后的发展方向是在改性基础上的协同作用.     

高浸透性大分子聚酯乳液的研制

1前言 随着池窑生产的发展,原有的浸润剂在快速浸润性和快速浸透性方面无法得到满足.意大利DSM公司聚酯乳液是公认的喷射纱浸润剂最好的成膜剂.本项目的目的是研制出能工业化生产的与DSM公司产品质量相当的聚酯乳液,替代进口,节约外汇,满足我国池窑发展需要,争创良好的经济社会效益.     

宁静——使艺术深华

宁静的山是心灵的绘画,宁静的水是灵魂的诗篇,宁静的夜是精神的书籍。在这越来越充斥着物欲纵横的社会,浮躁成了现代人的代名词,而保持一颗宁静的心,尤其在艺术创作中显得尤为重要。     

Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

A relatively large wet material was immersed in a fluidized bed of hygroscopic porous particle (silica gel beads) under reduced pressure. And then the drying characteristics were compared with those in the case of inert particle (glass beads). The comparison of drying characteristics is performed experimentally and theoretically. In calculation, the water transfer from the sample to the fluidized bed was considered. The calculation results are in good agreement with the experimental data. The effects of the operational conditions (the pressure in the drying chamber and the temperature of the drying gas) on the drying characteristics were also examined in both fluidizing particles.The drying finishes earlier in the case of hygroscopic porous particle than in the case of inert particle regardless of pressure in the drying chamber, since the water transfer from the sample facilitates the drying in the case of hygroscopic porous particles. The temperature decrement in drying appears in the case of inert particle. This phenomenon is also observed in the case of hygroscopic porous particle, but the decrement degree of the temperature is much smaller than that in the case of inert particle. The difference of the minimum temperature in the sample in drying between the cases of hygroscopic porous particle and inert particle is very slight for different pressures in the drying chamber.     

Streptozotocin-Induced Diabetes Causes Changes in Serotonin-Positive Neurons in the Small Intestine in Pig Model

Serotonin (5-hydroxytryptamine or 5-HT) is an important neurotransmitter of the central and peripheral nervous systems, predominantly secreted in the gastrointestinal tract, especially in the gut. 5-HT is a crucial enteric signaling molecule and is well known for playing a key role in sensory-motor and secretory functions in the gut. Gastroenteropathy is one of the most clinical problems in diabetic patients with frequent episodes of hyperglycemia. Changes in 5-HT expression may mediate gastrointestinal tract disturbances seen in diabetes, such as nausea and diarrhea. Based on the double immunohistochemical staining, this study determined the variability in the population of 5-HT-positive neurons in the porcine small intestinal enteric neurons in the course of streptozotocin-induced diabetes. The results show changes in the number of 5-HT-positive neurons in the examined intestinal sections. The greatest changes were observed in the jejunum, particularly within the myenteric plexus. In the ileum, both de novo 5-HT synthesis in the inner submucosal plexus neurons and an increase in the number of neurons in the outer submucosal plexus were noted. The changes observed in the duodenum were also increasing in nature. The results of the current study confirm the previous observations concerning the involvement of 5-HT in inflammatory processes, and an increase in the number of 5-HT -positive neurons may also be a result of increased concentration of the 5-HT in the gastrointestinal tract wall and affects the motor and secretory processes, which are particularly intense in the small intestines.     

污泥生物炭中氮硫行为及环境效应研究进展

污泥生物炭中氮硫元素含量高,其氮硫行为和环境效应对全球气候变化的影响不容忽视。以往的研究中,研究者往往以富碳生物炭作为主要研究对象,关注碳对全球气候变化的行为和功效,而对氮硫元素的作用关注不够。本文从原始污泥基本性质到其热解过程,再到生物炭的老化,逐步对污泥生物炭整个生命周期内氮硫的行为及其环境效应研究进行综述,并对未来应注重开展的研究方向进行展望,为生物炭中氮硫元素固定、释放及与之关联的环境效应和温室气体排放控制研究提供理论基础。分析表明,污泥中氮元素含量普遍高于硫元素,且热解过程中氮比硫更容易转移至气相产物。氮硫元素随热解温度的增加,在三相产物中的分配都是炭中持续减少,油中先增后减,气中一直增加。高温（＞800℃）条件下,气相中的氮含量高于固相,而硫元素则仍然主要存在于固相中。污泥生物炭老化及其环境效应研究表明,污泥生物炭氮硫元素与土壤的相互作用及其温室效应问题在今后的研究中应引起重视。     

Evaluation of surfactant-aided degumming of vegetable oils by membrane technology

The first step in the process of vegetable oil refining is degumming, in which phospholipids and mucilaginous gums are removed that otherwise result in a low-grade oil. A membrane process is remarkably simple yet potentially offers many advantages in degumming. Studies were conducted on surfactant-aided membrane degumming with soybean and rapeseed oils in a magnetically stirred flat membrane batch cell with different types of microfiltration membranes. The reduction of phospholipids in soybean oil was in the range of 85.8–92.8% during the membrane process. The phosphorus content of membrane permeates of soybean oil was in the range of 20–58 mg/kg. Crude rapeseed oil contained higher amount of nonhydratable phospholipids and hence resulted in lower reduction in phospholipids, in the range of 66.4–83.2%. Addition of hydratable phospholipids could improve the efficiency of degumming in the membrane process without using any electrolyte, resulting in improvement of quality as well as quantity of the phospholipids.     

Possible Role of Crystal-Bearing Cells in Tomato Fertility and Formation of Seedless Fruits

Crystal-bearing cells or idioblasts, which deposit calcium oxalate, are located in various tissues and organs of many plant species. The functional significance of their formation is currently unclear. Idioblasts in the leaf parenchyma and the development of crystal-bearing cells in the anther tissues of transgenic tomato plants (Solanum lycopersicon L.), expressing the heterologous FeSOD gene and which showed a decrease in fertility, were studied by transmission and scanning electron microscopy. The amount of calcium oxalate crystals was found to increase significantly in the transgenic plants compared to the wild type (WT) ones in idioblasts and crystal-bearing cells of the upper part of the anther. At the same time, changes in the size and shape of the crystals and their location in anther organs were noted. It seems that the interruption in the break of the anther stomium in transgenic plants was associated with the formation and cell death regulation of a specialized group of crystal-bearing cells. This disturbance caused an increase in the pool of these cells and their localization in the upper part of the anther, where rupture is initiated. Perturbations were also noted in the lower part of the anther in transgenic plants, where the amount of calcium oxalate crystals in crystal-bearing cells was reduced that was accompanied by disturbances in the morphology of pollen grains. Thus, the induction of the formation of crystal-bearing cells and calcium oxalate crystals can have multidirectional effects, contributing to the regulation of oxalate metabolism in the generative and vegetative organs and preventing fertility when the ROS balance changes, in particular, during oxidative stresses accompanying most abiotic and biotic environmental factors.     

泰乐菌素在提取工艺中溶液中的稳定性研究

为探讨泰乐菌素在提取工艺中溶液中的稳定性,取提取工艺中不同环节的泰乐菌素溶液,采用高效液相色谱法测定在一定时间内检测泰乐菌素的含量,观察不同环节的泰乐菌素溶液的降解情况。结果显示,在提取工艺中不同环节的泰乐菌素溶液,均较稳定,结果证明,提取工艺中不同环节的泰乐菌素溶液稳定,基本上不降解。     

The stability of sodium hypochlorite in the presence of surfactants

Studies were made on the stability of NaOCl at 40°C in the presence of sodium alkanesulfonate or alkylarenesulfonate anionic surfactants, and in the presence of a nonionic surfactant,N-octylpyrrolidinone. The results were compared with NaOCl stability in the absence of additives and in the presence of nonsurfactant short-chain sodium alkylbenzenesulfonates. The data indicated that the rate of NaOCl loss is greatly dependent upon the pH of the solution, even at alkaline pHs. At initial pHs below 11, in the absence of additive, there is significant disproportionation of OCl⁻ to ClO ₃ ⁻ , accompanied by decrease in the pH of the solution, within a period of several days. Even at an initial pH of 11.3, in the presence of the surfactants investigated, there is significant disproportionation of OCl⁻ and decrease in the pH of the solution in the first several days. When the initial pH of the solution is 13.5, there is no significant decrease in pH of the solution for at least two months in the presence of the surfactants studied. NaOCl stability in the presence of surfactant decreases in the order: sodium linear alkanesulfonate > sodium linear alkyldiphenylethersulfonate > sodium linear alkylbenzenesulfonate >>N-octylpyrrolidinone. Stability was greater in the presence of linear alkylarenesulfonates than in the presence of branched alkylarenesulfonates. It is suggested that the differences in stability observed are due to the greater ease of oxidation of tertiary carbon atoms compared to primary or secondary atoms.     

Stress and strain state of concrete during freezing and thawing cycles

The objective of this work is to calculate the pressures, stresses, and strains induced into moist concrete during freezing and thawing. The applied theory is based on thermodynamics and the linear theory of elasticity. If no additional salts are dissolved in the pore water the inputs needed in the theory are relative humidity and temperature measured in the sample chamber and inside concrete and evaporable water amount in the pore structure. Theoretical results were compared with the test results made with two concretes cured under water or at 96% relative humidity. One of the concretes was air entrained and in the comparison concrete no air-entraining agents were used. In the test cylinders cured under water the largest tensional stresses in freezing occurred on the surface of the test cylinders both in the axial and tangential direction. The largest tensional stress was 2.2 MPa, both in air-entrained and in non air-entrained concretes. The largest tensional stresses in the warming phase took place at the end of the thawing period when the chamber temperature was around +5 °C. Then the maximum tension occurred in the middle of the concrete cylinder in the axial direction of the cylinder. This maximum tensional stress was over 2.5 MPa in the air-entrained concrete cured in the relative humidity of 96%. The thermodynamic pumping effect at the end of the thawing phase in every cycle can increase the pore water amount remarkably if free water or moisture is available on the surface of the structure or in the environment vapor. The thermodynamic pumping effect seems to be remarkably greater and more dangerous in air-entrained concretes.     

Oxygen Fugacity Control in Nonflowing Atmospheres: I, Experimental Observations in CO/CO2 and O2/N2 Mixtures

The performance of a stabilized zirconia sensor and electrochemical oxygen pump combination in the isothermal control of oxygen fugacity in a nonflowing atmosphere was studied in a closed furnace system in the temperature range of 800° to 1100°C. Under certain conditions, large differences in oxygen pressure were found between sensors at the same constant temperature in close proximity to each other. This result reflected the existence of a stable steplike oxygen fugacity "front" in the furnace, separating regions which differed by several orders of magnitude in oxygen fugacity. This oxygen pressure profile in the furnace resulted from the steady-state transport of oxygen from oxygen leakage sources to the pump. The existence, magnitude, and position of the oxygen fugacity front were found to depend on the gas-phase composition, the relative locations of the leakage sources and the pump, the oxygen fugacity of the reference electrode, and the magnitude of the oxygen flux in the gas phase.     

循环流化床提升管T形弯头动态压力的小波分析

针对循环流化床提升管出口T形弯头,以FCC催化剂颗粒为物料,采用动态压力传感器,对T形弯头内的气固两相流的动态压力进行了实验测量,以此分析T形弯头内动态压力的特性。实验结果表明,由于在T形弯头盲管处颗粒折返造成的冲击,形成了一个压力脉动源。小波分析表明T形弯头处的压力脉动主频来自盲管内,而次频能量所占比例随着颗粒质量流率增加而加大。T形弯头内的动态压力的标准偏差与颗粒质量流率呈线性关系,可以用于表征循环流化床内的颗粒质量流率。