In situ controlled synthesis of thermosensitive poly(N-isopropylacrylamide)/Au nanocomposite hydrogels by gamma radiation for catalytic application

Thermosensitive poly(N‐isopropylacrylamide) (PNIPAM)/Au nanoparticle (NP) nanocomposite hydrogels are synthesized by in situ γ‐radiation‐assisted polymerization of N‐isopropylacrylamide monomer aqueous solution in the presence of HAuCl₄·4H₂O. In this reaction, the PNIPAM hydrogels and the Au NPs are formed simultaneously, thus demonstrating an easy and straightforward synthetic strategy for the preparation of a uniform nanocomposite. The results suggest that increasing the monomer content during the preparation of nanocomposite materials can increase the sizes of Au NPs. The effects of irradiation dose and concentration of HAuCl₄·4H₂O on the optical and thermal properties of the hydrogel are also investigated. The PNIPAM/Au nanocomposite hydrogels act as an excellent catalyst for the conversion of o‐nitroaniline to 1,2‐benzenediamine, and the catalytic activity of the composite hydrogel can be tuned by the volume transition of PNIPAM. The in situ polymerization of monomer and reduction of metal ions initiated by a “clean” and “green” γ‐radiation technique can be extended to the efficient synthesis of other nanocomposite materials.     

Effect of silver nanoparticles content on the various properties of nanocomposite hydrogels by in situ polymerization

A series of nanocomposite hydrogels (APEAg series gels) were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and silver nanoparticles through in situ polymerization by UV irradiation. The effect of the content of silver nanoparticle on the properties of the nanocomposite hydrogels was investigated. Results showed that, with increasing of the content of the silver nanoparticle in the hydrogels, the crosslinking density and shear modulus of the hydrogel were not obviously changed, the electrical conductivities of the nanocomposite hydrogels increased, and their initial rate of Escherichia coli inactivation significantly increased, but their adhesive force only slightly decreased. These materials can be assessed as promising bioadhesive patch or wound-dressing material or electrical massage patch.     

Fabrication of a Au/Si nanocomposite structure by nanosecond pulsed laser irradiation

A gold/silicon nanocomposite structure (NCS) was formed on a Si(100) surface by nanosecond pulsed laser irradiation. The Au/Si NCS contained both Au nanoparticles (NPs) and Au-Si alloy layers. We report that the use of laser irradiation to form Au NPs comprises two competing processes: a top-down effect involving decomposition into smaller NPs and a bottom-up effect involving self-assembly or self-organization into larger NPs. The formation of the periodic structure involved self-organization, i.e., the bottom-up effect, and was observed in situ using a pulsed-laser-equipped high-voltage electron microscope. The NCS formed by laser irradiation can be controlled by adjusting the laser energy density and the number of laser pulses.     

Poly(DMAEMA-co-VP)/Fe_3O_4纳米复合水凝胶的制备及性能

以甲基丙烯酸-N,N-二甲氨基乙酯(DMAEMA)、4-乙烯基吡啶(VP)为单体,N,N-亚甲基双丙烯酰胺(BIS)为交联剂,在Fe_3O_4纳米粒子分散液中原位共聚制备了具有温度、pH、磁场三重响应性的纳米复合水凝胶。对纳米复合水凝胶的溶胀性能、温敏性、pH敏感性、磁场响应性等性能进行了研究,进而考察了纳米复合水凝胶对重金属离子(Cu~(2+))的吸附脱附行为。结果表明,纳米复合水凝胶具有良好的温敏性、pH敏感性和磁场响应性,并且对重金属离子(Cu~(2+))有可逆的吸附-脱附作用。     

A reconstituted thermosensitive hydrogel system based on paclitaxel-loaded amphiphilic copolymer nanoparticles and antitumor efficacy

Combination delivery systems composed of injectable hydrogels and drug-incorporated nanoparticles are urgently in regional cancer chemotherapy to facilitate efficient delivery of chemotherapeutic agents, enhance antitumor efficiency, and decrease side effects. Here, we developed a novel thermosensitive amphiphilic triblock copolymer consisting of methoxy poly(ethylene glycol), poly(octadecanedioic anhydride), and d,l-lactic acid oligomer (PEOALA), built a combination system of thermosensitive injectable hydrogel PTX/PEOALA^Gel based on paclitaxel (PTX)-loaded PEOALA nanoparticles (NPs). PTX/PEOALA^Gel could be stored as freeze-dried powders of paclitaxel-loaded PEOALA NPs, which could be easily redispersed into the water at ambient temperature, and form a hydrogel at the injected site in vivo. The in vitro cytotoxicity of PTX/PEOALA^Gel showed no obvious cytotoxicity in comparison with Taxol® against MCF-7 and HeLa cells. However, the in vivo antitumor activity showed that a single intratumoral injection of the PTX/PEOALA^Gel formulation was more effective than four intravenous (i.v.) injections of Taxol^® at a total dosage of 20?mg/kg in inhibiting the growth of MCF-7 tumor-bearing Balb/c mice, and the inhibition could be sustained for more than 17 d. The pharmacokinetic study demonstrated that the intratumoral injection of PTX/PEOALA^Gel could greatly decrease the systemic exposure of PTX, as confirmed by the rather low plasma concentration, and prolonged circulation time and enhanced tumor PTX accumulation, implying fewer off-target side effects. In summary, the PTX/PEOALA^Gel combination local delivery system could enhance tumor inhibition effect and tumor accumulation of PTX, and lower the systemic exposure. So, the reconstituted PTX/PEOALA^Gel system could potentially be a useful vehicle for regional cancer chemotherapy.     

Biomimetic patterning of polymer hydrogels with hydroxyapatite nanoparticles

We report here an in situ process to produce nano-composite polymer hydrogels having surfaces patterned with hydroxyapatite (HA) nanoparticles (100 nm). Poly (vinyl alcohol) (PVA) has been used as a hydrogel forming medium. A three step process, comprising precipitation of HA nanoparticles in presence of PVA molecules and freeze thawing of obtained PVA-HA emulsion, followed by critical point drying, has been devised to produce three dimensional nanocomposite hydrogels. Interaction of Ca²⁺ with oxygen atoms of PVA and the hydrogen bonding characteristic of the polymer have been exploited to have controlled size distribution of HA in a continuous and macroporous network of PVA. A systematic variation in the polymer concentration could be correlated with microstructural features of the hydrogel.     

Fundamental examination of nanoparticle heating kinetics upon near infrared (NIR) irradiation

Near infrared (NIR) light, which spans wavelengths from ~700-1100 nm holds particular promise in bionanotechnology-enabled applications because both NIR light and nanoparticles (NPs) have the potential for remote activation leading to exquisite localization and targeting scenarios. In this study, aqueous solutions of carbon and metal-based NPs (carbon black, single-walled carbon nanotubes, silver nanoparticles and copper nanoparticles) were exposed to continuous NIR laser (λ = 1064 nm) irradiation at powers of 2.2W and 4.5W. The differential heating of bulk aqueous suspension of NPs with varying physicochemical properties revealed maximum temperatures of 67 °C with visible evidence of condensation and bubble formation. The basis of the NP heating is due to the strong intrinsic optical absorbance in the NIR spectral window and the transduction of this NIR photon energy into thermal energy. In this regard, UV-vis measurements can accurately predict NP heating kinetics prior to NIR irradiation. Further, a uniform thermodynamic heating model demonstrates close agreement with the experimental data for the low NIR-absorbing NPs. However, the uniform thermodynamic heating model used in this study does not accurately portray the energy release upon localized NP heating because of bubble formation for the highly absorbing NPs. Therefore, this study reveals the differential heating kinetics of NPs excited with NIR with implications in the development of novel NIR-NP-based systems.     

Poly(vinyl alcohol)/poly(acrylic acid)/TiO2/graphene oxide nanocomposite hydrogels for pH-sensitive photocatalytic degradation of organic pollutants

Poly(vinyl alcohol)/poly(acrylic acid)/TiO₂/graphene oxide nanocomposite hydrogels were prepared using radical polymerization and condensation reaction for the photocatalytic treatment of waste water. Graphene oxide was used as an additive to improve the photocatalytic activity of poly(vinyl alcohol)/poly(acrylic acid)/TiO₂ nanocomposite hydrogels. Both TiO₂ and graphene oxide were immobilized in poly(vinyl alcohol)/poly(acrylic acid) hydrogel matrix for an easier recovery after the waste water treatment. The photocatalytic activity of poly(vinyl alcohol)/poly(acrylic acid)/TiO₂/graphene oxide nanocomposite hydrogels was evaluated on the base of the degradation of pollutants by using UV spectrometer. The improved removal of pollutants was due to the two-step mechanism based on the adsorption of pollutants by nanocomposite hydrogel and the effective decomposition of pollutants by TiO₂ and graphene oxide. The highest swelling of nanocomposite hydrogel was observed at pH 10 indicating that poly(vinyl alcohol)/poly(acrylic acid)/TiO₂/graphene oxide nanocomposite hydrogels were suitable as a promising system for the treatment of basic waste water.     

Low-cost removal of organic pollutants with nickel nanoparticle loaded ordered macroporous hydrogel as high performance catalyst

A facile route for the in situ preparation of catalytically active Ni nanoparticles (NPs) in ordered macroporous hydrogel (OMH) has been developed. The hydrogel was fabricated based on polystyrene colloid template. The electronegativity of amide and carboxyl groups on the poly(acrylamide-co-acryl acid) chains of the hydrogel caused strong binding of Ni²⁺ ions which made them distribute uniformly inside the hydrogel. When immersed in NaBH₄ aqueous solution, the Ni²⁺ ions on the hydrogel were reduced to Ni NPs. The resultant Ni NPs loaded OMH showed good catalytic activity for the reduction of a common organic pollutant, 4-nitrophenol, with NaBH₄. A kinetic study of the catalytic reaction was carried out. The rate constant per unit weight could reach 0.53 s⁻¹ g⁻¹, which is much better than many common hydrogel loaded nickel catalysts. Moreover, the current catalyst can be easily separated and recovered with stable catalytic activity.     

Synthesis, swelling and drug release behavior of poly(N,N-diethylacrylamide-co-N-hydroxymethyl acrylamide) hydrogel

In this study, poly(N,N-diethylacrylamide-co-N-hydroxymethyl acrylamide) (poly(DEA-co-NHMAA)) hydrogels were synthesized by changing the initial DEA/NHMAA mole ratio, N,N'-methylenebisacrylamide and total monomer concentration. The thermosensitive and mechanical performances were optimized by altering the above parameters. The hydrogels were characterized by using Fourier transform infrared (FTIR) spectroscope and scanning electron microscope (SEM). In comparison with the PDEA hydrogel, the equilibrium swelling ratio (ESR) and lower critical solution temperature (LCST) of the hydrogels increased with the increase of NHMAA content in the feed. The swelling kinetics was also studied. The release behaviors of the model drug, aminophylline, are found dependent on hydrogel composition and environmental temperature, which suggests that these materials have potential application as intelligent drug carriers.     

Poly(Vinylpyrollidone)‐ and Selenocysteine‐Modified Bi2Se3 Nanoparticles Enhance Radiotherapy Efficacy in Tumors and Promote Radioprotection in Normal Tissues

The development of a new generation of nanoscaled radiosensitizers that can not only enhance radiosensitization of tumor tissues, but also increase radioresistance of healthy tissue is highly desirable, but remains a great challenge. Here, this paper reports a new versatile theranostics based on poly(vinylpyrollidone)‐ and selenocysteine‐modified Bi₂Se₃ nanoparicles (PVP‐Bi₂Se₃@Sec NPs) for simultaneously enhancing radiotherapeutic effects and reducing the side‐effects of radiation. The as‐prepared nanoparticles exhibit significantly enhanced free‐radical generation upon X‐ray radiation, and remarkable photothermal effects under 808 nm NIR laser irradiation because of their strong X‐ray attenuation ability and high NIR absorption capability. Moreover, these PVP‐Bi₂Se₃@Sec NPs are biodegradable. In vivo, part of selenium can be released from NPs and enter the blood circulation system, which can enhance the immune function and reduce the side‐effects of radiation in the whole body. As a consequence, improved superoxide dismutase and glutathione peroxidase activities, promoted secretion of cytokines, increased number of white blood cell, and reduced marrow DNA suppression are found after radiation treatment in vivo. Moreover, there is no significant in vitro and in vivo toxicity of PVP‐Bi₂Se₃@Sec NPs during the treatment, which demonstrates that PVP‐Bi₂Se₃@Sec NPs have good biocompatibility.     

A novel vehicle for local protein delivery to the inner ear: injectable and biodegradable thermosensitive hydrogel loaded with PLGA nanoparticles

Delivery of biomacromolecular drugs into the inner ear is challenging, mainly because of their inherent instability as well as physiological and anatomical barriers. Therefore, protein-friendly, hydrogel-based delivery systems following local administration are being developed for inner ear therapy. Herein, biodegradable poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) containing interferon α-2?b (IFN α-2?b) were loaded in chitosan/glycerophosphate (CS/GP)-based thermosensitive hydrogel for IFN delivery by intratympanic injection. The injectable hydrogel possessed a physiological pH and formed semi-solid gel at 37?°C, with good swelling and deswelling properties. The CS/GP hydrogel could slowly degrade as visualized by scanning electron microscopy (SEM). The presence of NPs in CS/GP gel largely influenced in vitro drug release. In the guinea pig cochlea, a 1.5- to 3-fold increase in the drug exposure time of NPs-CS/GP was found than those of the solution, NPs and IFN-loaded hydrogel. Most importantly, a prolonged residence time was attained without obvious histological changes in the inner ear. This biodegradable, injectable, and thermosensitive NPs-CS/GP system may allow longer delivery of protein drugs to the inner ear, thus may be a potential novel vehicle for inner ear therapy.     

Biocompatible Conjugated Polymer Nanoparticles for Efficient Photothermal Tumor Therapy

Conjugated polymers (CPs) with strong near‐infrared (NIR) absorption and high heat conversion efficiency have emerged as a new generation of photothermal therapy (PTT) agents for cancer therapy. An efficient strategy to design NIR absorbing CPs with good water dispersibility is essential to achieve excellent therapeutic effect. In this work, poly[9,9‐bis(4‐(2‐ethylhexyl)phenyl)fluorene‐alt‐co‐6,7‐bis(4‐(hexyloxy)phenyl)‐4,9‐di(thiophen‐2‐yl)‐thiadiazoloquinoxaline] (PFTTQ) is synthesized through the combination of donor–acceptor moieties by Suzuki polymerization. PFTTQ nanoparticles (NPs) are fabricated through a precipitation approach using 1,2‐distearoyl‐ sn ‐glycero‐3‐phosphoethanolamine‐N‐[methoxy(polyethylene glycol)‐2000] (DSPE‐PEG₂₀₀₀) as the encapsulation matrix. Due to the large NIR absorption coefficient (3.6 L g^‐1 cm^‐1), the temperature of PFTTQ NP suspension (0.5 mg/mL) could be rapidly increased to more than 50 °C upon continuous 808 nm laser irradiation (0.75 W/cm²) for 5 min. The PFTTQ NPs show good biocompatibility to both MDA‐MB‐231 cells and Hela cells at 400 μg/mL of NPs, while upon laser irradiation, effective cancer cell killing is observed at a NP concentration of 50 μg/mL. Moreover, PFTTQ NPs could efficiently ablate tumor in in vivo study using a Hela tumor mouse model. Considering the large amount of NIR absorbing CPs available, the general encapsulation strategy will enable the development of more efficient PTT agents for cancer or tumor therapy.     

Effect of AAc-GA content on swelling behaviors of temperature-sensitive PNIPAAm-based hydrogels

A series of temperature-sensitive poly(NIPAAm-co-AAc-GA) hydrogels were synthesized by the copolymerization of glycyrrhetinic acid with vinyl monomer (AAc-GA) and N-isopropylacrylamide (NIPAAm) in N, N-dimethylformamide (DMF). Since GA has the specific binding capacity to asialoglycoprotein receptors on the membrane of hepatocyte, the hydrogel with GA could be expected as good candidate for hepatic cell culture. The results showed that macroporous and channel network structure was formed in the hydrogel matrix. With increasing the AAc-GA content, the swelling ratios of hydrogels and lower critical solution temperature (LCST) increased because of the hydrophilic group of AAc-GA and the macroporous structure. In addition, the prepared hydrogels could respond quickly to temperature and exhibited good reversible temperature-responsive characteristics.     

Recent Advances in Poly(N-isopropylacrylamide) Hydrogels and Derivatives as Promising Materials for Biomedical and Engineering Emerging Applications

Temperature-sensitive (thermosensitive) hydrogels, which are part of the family of stimulus-sensitive hydrogels, consist of water-filled polymer networks that display a temperature-dependent degree of swelling. Thermosensitive hydrogels, which can undergo phase transition or swell/de-swell as temperature changes, have great potential in various technological and biomedical purposes for a number of reasons: their temperature response is reversible, hydrogels are stable and easy to prepare, they can be biocompatible and also be suitably combined with other organic and inorganic materials, resulting in new materials with outstanding properties. Among thermosensitive hydrogels poly(N-isopropylacrylamide) (PNIPAAm) is the most extensively studied because it brings together the best properties of these materials. Consequently, in the past few years, a wide number of applications and new chemical processes to prepare PNIPAAm and their derivatives are being proposed. The objective of this review is to summarize the fundamentals of thermosensitive hydrogels and recent advances in preparation and both technological and biomedical applications of thermosensitive hydrogel, with a special focus on PNIPAAm and their derivatives. Special attention has been given to the discussion of challenges and future research perspectives based on new horizons not yet considered.     

Adhesive Hemostatic Conducting Injectable Composite Hydrogels with Sustained Drug Release and Photothermal Antibacterial Activity to Promote Full‐Thickness Skin Regeneration During Wound Healing

Developing injectable nanocomposite conductive hydrogel dressings with multifunctions including adhesiveness, antibacterial, and radical scavenging ability and good mechanical property to enhance full‐thickness skin wound regeneration is highly desirable in clinical application. Herein, a series of adhesive hemostatic antioxidant conductive photothermal antibacterial hydrogels based on hyaluronic acid‐graft‐dopamine and reduced graphene oxide (rGO) using a H₂O₂/HPR (horseradish peroxidase) system are prepared for wound dressing. These hydrogels exhibit high swelling, degradability, tunable rheological property, and similar or superior mechanical properties to human skin. The polydopamine endowed antioxidant activity, tissue adhesiveness and hemostatic ability, self‐healing ability, conductivity, and NIR irradiation enhanced in vivo antibacterial behavior of the hydrogels are investigated. Moreover, drug release and zone of inhibition tests confirm sustained drug release capacity of the hydrogels. Furthermore, the hydrogel dressings significantly enhance vascularization by upregulating growth factor expression of CD31 and improve the granulation tissue thickness and collagen deposition, all of which promote wound closure and contribute to a better therapeutic effect than the commercial Tegaderm films group in a mouse full‐thickness wounds model. In summary, these adhesive hemostatic antioxidative conductive hydrogels with sustained drug release property to promote complete skin regeneration are an excellent wound dressing for full‐thickness skin repair.     

有机/无机纳米复合水凝胶的制备与应用

纳米材料具有直径小、比表面积大以及易于实现表面功能化的优点,受到广泛的关注。与普通水凝胶相比,将无机纳米材料分散在水凝胶中制备的有机/无机纳米复合水凝胶的力学性能、光学性能、热力学性能都有较大提高。主要综述了TiO₂、SiO₂、Fe₃O₄等无机物作为填充剂或交联剂制备纳米复合水凝胶的方法,如共混法、原位法等,并分析了其在环保、医药等领域的应用。     

Temperature-sensitivity and cell biocompatibility of freeze-dried nanocomposite hydrogels incorporated with biodegradable PHBV

The structure, morphology, thermal behaviors and cytotoxicity of novel hydrogels, composed of poly(N-isopropylacrylamide)(PNIPAM) and biodegradable polyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) under nanoclay hectorite “Laponite XLG” severed as physical cross-linker, were characterized by X-ray diffraction, scanning electron microscopy, gravimetric method, differential scanning calorimetry, and cell culture experiments. It was found that, due to the introduction of hydrophobic PHBV, the homogeneity of interior pore in the pure PNIPAM nanocomposite hydrogel was disrupted, the transparency and swelling degree gradually decreased. Although the weight ratio between PHBV and NIPAM increased from 5 to 40 wt.%, the volume phase transition temperature (VPTTs) of hydrogel were not altered compared with the pure PNIPAM nanocomposite hydrogel. No matter what PHBV content, the PHBV/PNIPAM/Hectorite hydrogels always exhibit good stimuli-responsibility. In addition, human hepatoma cells(HepG2) adhesion and spreading on the surface of PHBV-based hydrogels was greatly improved than that of pure PNIPAM nanocomposite hydrogel at 37 °C due to the introduction of PHBV.     

Novel PAAm/Laponite clay nanocomposite hydrogels with improved cationic dye adsorption behavior

A nanocomposite (NC) hydrogel was prepared by incorporating the nanoclay (Laponite (Lap) XLS) into a poly(acrylamide) (PAAm) hydrogel by the in situ polymerization method without any organic cross-linker. The parameters pertaining to the swelling (Q) and diffusion (D) of water for the PAAm/Lap NC hydrogels were estimated. The crystal violet (CV) dye adsorption properties of the PAAm/Lap NC hydrogels were investigated. The adsorption of CV dye by the hydrogel increases as the concentration of the dye increases. The cationic dye adsorption ability of the NC hydrogel increased with increasing clay content in the NC hydrogel. The NC hydrogels containing CV dye were characterized by FT-IR. A sigmoidal type of adsorption isotherm was observed for the CV-NC hydrogels. The effects of heat treatment on the dye adsorption behavior of the NC hydrogels were studied.     

Colorimetric assay of lead ions in biological samples using a nanogold-based membrane

We have developed a simple paper-based colorimetric membrane for sensing lead ions (Pb(2+)) in aqueous solutions. The nitrocellulose membrane (NCM) was used to trap bovine serum albumin (BSA) modified 13.3-nm Au nanoparticles (BSA-Au NPs), leading to the preparation of a nanocomposite film of a BSA-Au NP-decorated membrane (BSA-Au NPs/NCM). The BSA-Au NPs/NCM operates on the principle that Pb(2+) ions accelerate the rate of leaching of Au NPs induced by thiosulfate (S(2)O(3)(2-)) and 2-mercaptoethanol (2-ME). The BSA-Au NPs/NCM allowed for the detection of Pb(2+) by the naked eye in nanomolar aqueous solutions in the presence of leaching agents such as S(2)O(3)(2-) and 2-ME. We employed the assistance of microwave irradiation to shorten the reaction time (<10 min) for leaching the Au NPs. Under optimal solution conditions (5 mM glycine-NaOH (pH 10), S(2)O(3)(2-) (100 mM), and 2-ME (250 mM), microwaves (450 W)), the BSA-Au NPs/NCM allowed the detection of Pb(2+) at concentrations as low as 50 pM with high selectivity (at least 100-fold over other metal ions). This cost-effective sensing system allowed for the rapid and simple determination of the concentrations of Pb(2+) ions in real samples (in this case, sea water, urine, and blood samples).