Cocontinuous cellulose acetate/polyurethane composite nanofiber fabricated through electrospinning

Cocontinuous cellulose acetate (CA)/polyurethane (PU) composite nanofibers were obtained through electrospinning of partially miscible CA and PU in 2:1 N,N‐dimethylacetamide (DMAc)/acetone mixture solvent. Their structures, mechanical, and thermal properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The structures and morphologies of the nanofibers were affected by component ratio in the binary mixtures. PU component not only facilitated the electrospinning of CA at CA concentration down to 12 wt%, but reinforced the tensile strength of CA/PU nanofibrous mats, while semirigid component CA in the composite nanofibers could greatly improve the rigidity and dimensional stability of CA/PU nanofibrous mats. In a series of nanofibrous mats with varied CA/PU composition ratios, CA/PU 20/80 showed excellent tensile strength and Young's modulus. The residual product after selective removal of any one of the components in CA/PU composite nanofibers by washing with proper solvent maintained the fiber structure but greatly reduced the fiber size, suggesting CA/PU composite fibers showed a cocontinuous nanofiber structure due to phase separation in the spinning solution and in the course of electrospinning. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Sea‐island polyurethane/polycarbonate composite nanofiber fabricated through electrospinning

Sea‐island polyurethane (PU)/polycarbonate (PC) composite nanofibers were obtained through electrospinning of partially miscible PU and PC in 3 : 7 (v/v) N,N‐dimethylformamide (DMF) and tetrahydrofuran (THF) mixture solvent. Their structures, mechanical, and thermal properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric (TG), and differential scanning calorimetry (DSC). The structures and morphologies of the nanofibers were influenced by composition ratio in the binary mixtures. The pure PC nanofiber was brittle and easy to break. With increasing the PU content in the PU/PC composite nanofibers, PU component not only facilitated the electrospinning of PC but improved the mechanical properties of PU/PC nanofibrous mats. In a series of nanofibrous mats with varied PU/PC composition ratios, PU/PC 70/30 showed excellent tensile strength of 9.60 Mpa and Young's modulus of 55 Mpa. After selective removal of PC component in PU/PC composite nanofibers by washing with acetone, the residual PU maintained fiber morphology. However, the residual PU nanofiber became irregular and contained elongated indents and ridges along the fiber surface. PU/PC composite fibers showed sea‐island nanofiber structure due to phase separation in the spinning solution and in the course of electrospinning. At PC content below 30%, the PC domains were small and evenly dispersed in the composite nanofibers. As PC content was over 50%, the PC phases became large elongated aggregates dispersed in the composite nanofibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of electrospun poly(ε‐caprolactone)–pluronic–poly(ε‐caprolactone)‐based polyurethane nanofibers

In this study, amphiphilic poly(ε‐caprolactone)–pluronic–poly(ε‐caprolactone) (PCL–pluronic–PCL, PCFC) copolymers were synthesized by ring‐opening copolymerization and then reacted with isophorone diisocyanate to form polyurethane (PU) copolymers. The molecular weight of the PU copolymers was measured by gel permeation chromatography, and the chemical structure was analyzed by ¹H‐nuclear magnetic resonance and Fourier transform infrared spectra. Then, the PU copolymers were processed into fibrous scaffolds by the electrospinning technology. The morphology, surface wettability, mechanical strength, and cytotoxicity of the obtained PU fibrous mats were investigated by scanning electron microscopy, water contact angle analysis, tensile test, and MTT analysis. The results show that the molecular weights of PCFC and PU copolymers significantly affected the physicochemical properties of electrospun PU nanofibers. Moreover, their good in vitro biocompatibility showed that the as‐prepared PU nanofibers have great potential for applications in tissue engineering. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43643.     

Preparation and antibacterial activity of PET/chitosan nanofibrous mats using an electrospinning technique

The nanofiber deposition method, by electrospinning, was employed to introduce antibacterial activity and biocompatibility to the surface of poly (ethylene terephthalate) (PET) textiles. The polymer blends of PET and chitosan were electrospun on to the PET micro‐nonwoven mats for biomedical applications. The PET/chitosan nanofibers were evenly deposited on to the surface, and the diameter of the nanofibers was in the range between 500 and 800 nm. The surface of the nanofibers was characterized using SEM, ESCA, AFM, and ATR‐FTIR. The wettability of the PET nanofibers was significantly enhanced by the incorporation of chitosan. The antibacterial activity of the samples was evaluated utilizing the colony counting method against Staphylococcus aureus and Klebsiella pneumoniae. The results indicated that the PET/chitosan nanofiber mats showed a significantly higher growth inhibition rate compared with the PET nanofiber control. In addition, the fibroblast cells adhered better to the PET/chitosan nanofibers than to the PET nanofibers mats, suggesting better tissue compatibility. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Bimetallic Zn/Ag doped polyurethane spider net composite nanofibers: A novel multipurpose electrospun mat

The objective of this study was to develop a new class of bimetallic ZnO/Ag embedded polyurethane multi-functional nanocomposite by a straightforward approach. Bimetallic nanomaterials, composed of two unlike metal elements, are of greater interest than the monometallic materials because of their improved characteristics. In the present study the bimetallic composite was prepared using sol–gel via the facile electrospinning technique. The utilized sol–gel was composed of zinc oxide, silver and poly(urethane). The physicochemical properties of as-spun composite mats were determined by X-ray diffraction pattern, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and transmission electron microscopy. The antibacterial activity was tested using Escherichia coli as model organism. The antibacterial test showed that ZnO:Ag/polyurethane composite possesses superior antimicrobial activity than pristine PU and ZnO/PU hybrids. Furthermore, our results illustrate that the synergistic effect of ZnO and Ag resulted in the advanced antimicrobial action of bimetallic ZnO/Ag composite mat. The viability and proliferation properties of NIH 3T3 mouse fibroblast cells on the ZnO:Ag/polyurethane composite nanofibers were analyzed by in vitro cell compatibility test. Our results indicated the non-cytotoxic behavior of bimetallic ZnO:Ag/polyurethane nanofibers towards the fibroblast cell culture. In summary, novel ZnO:Ag/polyurethane composite nanofibers which possess large surface to volume ratio with excellent antimicrobial activity were fabricated. The unique combination of ZnO and Ag nanoparticles displayed potent bactericidal effect due to a synergism. Hence the electrospun bimetallic composite indicates the huge potential in water filtration, clinical and biomedical applications.     

Self synthesize of silver nanoparticles in/on polyurethane nanofibers: Nano‐biotechnological approach

In this study, we are introducing a new class of Polyurethane (PU) nanofibers containing silver nanoparticles (NPs) by electrospinning. A simple method not depending on the addition of foreign chemicals has been used to self‐synthesize of silver NPs in/on PU nanofibers. Typically, a sol?gel consisting of AgNO₃/PU/N,N‐dimethylformamide (DMF) has been electrospun and aged for a week, so silver NPs have been created in/on PU nanofibers. Syntheses of silver NPs were carried out by exploiting the reduction ability of the DMF solvent which is the main constituent to obtain PU electrospun nanofibers in decomposition of silver nitrate precursor into silver NPs. Physiochemical characterizations confirmed well oriented nanofibers and good dispersing of pure silver NPs. Various parameters affecting utilizing of the prepared nanofibers on various nano‐biotechnological fields have been studied. For instance, the obtained nanofiber mats were checked for mechanical properties which showed the improvement of the tensile strength upon increase in silver NPs content. Moreover, the nanofibers were subjected to 10 times successive washing experiments with using solid to liquid ratio of 3 : 5000 for 25 h, UV spectroscopy analysis reveals no losses of silver NPs from the PU nanofibers. 3T3‐L1 fibroblasts were cultured in presence of the designed nanofibers. The morphological features of the cells attached on nanofibers were examined by BIO‐SEM, which showed well attachment of cells to fibrous mats. The cytotoxicity results indicated absence of toxic effect on the 3T3‐L1 cells after cell culturing. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

In Vitro Biocompatibility and Antibacterial Activity of Electrospun Ag Doped HAp/PHBV Composite Nanofibers

The authors report herein in vitro antibacterial property and osteoblast biocompatibility of electrospun Ag doped HAp/PHBV (Ag-HAp/PHBV) composite nanofibers as an osteoconductive and antibacterial material for bone tissue engineering applications. Ag-HAp powders were synthesized and stable composite suspensions of Ag-HAp/PHBV were prepared with the aid of a cationic surfactant DTAB for the electrospinning process. Continuous and uniform composite nanofibers were generated within a diameter range of 400–900 nm. Obtained nanocomposite scaffolds provide a favorable environment for bone mineralization, SaOS-2 osteoblastic cell attachment and growth as well as they present antibacterial activity against E. coli and S. aureus bacteria without any noticeable cytotoxic effect.     

Preparation and characterization of octadecane/polyurea nanocapsule‐embedded poly(ethylene oxide) nanofibers

This article describes the preparation and characterization of latent heat storage poly(ethylene oxide) nanofibers (LHS‐PEO nanofibers) with octadecane/polyurea (PCM/PU) nanocapsules. PCM/PU nanocapsules were prepared by interfacial polycondensation from toluene 2,4‐diisocyanate and ethylene diamine in a resin‐fortified emulsion system. LHS‐PEO nanofibers were prepared using an electrospinning procedure with varying PCM/PU nanocapsules content, i.e., from 0 to 8 wt %. The PCM/PU nanocapsules were polydisperse with an average diameter of 200 nm. The melting and freezing temperatures were determined as 23.7 and 28.2°C, respectively, and the corresponding latent heats were determined as 123.4 and 124.1 kJ kg^?1, respectively. The encapsulation efficiency of the PCM/PU nanocapsules was 78.1%. The latent heat capacity of the LHS‐PEO nanofibers increased as the PCM/PU nanocapsules content increased. Defects, such as holes and disconnection of the nanofibers, were observed, particularly inside the LHS‐PEO nanofibers. For packaging applications, mats were fabricated from the nanocapsules‐embedded nanofibers with varying nanocapsule content and the mats’ surface temperatures were monitored with a thermal imaging camera. The results proved the feasibility of using the LHS‐PEO nanofibers for thermal energy storage and functional packaging materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42539.     

Antibacterial ciprofloxacin HCl incorporated polyurethane composite nanofibers via electrospinning for biomedical applications

We report on the preparation and characterization of polyurethane (PU) composite nanofibers by electrospinning. Two different approaches were adopted to obtain the PU composite nanofibers. In the first approach, a homogeneous solution of 10 wt% PU containing ciprofloxacin HCl (CipHCl) drug was electrospun to obtain PU/Drug composite nanofibers. And in the second approach, the PU with ciprofloxacin HCl drug and ceramic hydroxyapatite (HA) particles were electrospun to obtain the PU/Drug and PU/Drug/HA composite nanofibers. The surface morphology, structure, bonding configuration, optical and thermal properties of the resultant products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and UV–vis spectroscopy. The antibacterial activity was tested against common food borne pathogenic bacteria, namely, Staphylococcus aureus, Escherichia coli by the minimum inhibitory concentration (MIC) method. Our result results demonstrate that these composite nanofibers possess superior characteristics which can utilized for variety of applications.     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Preparation and characterization of ampicillin‐incorporated electrospun polyurethane scaffolds for wound healing and infection control

Electrospinning is a desired method to produce interconnected flexible nanofibrous structures suitable for tissue engineering, drug delivery, and wound healing. Ampicillin‐loaded polyurethane (PU) nanofiber mats were electrospun with the antibiotic dispersed in well‐oriented nanofibers. The identification of functional groups, molecular interactions and surface morphology of the fibers were analyzed using Infrared, Raman, ¹H NMR, SEM, and TEM. Weak interactions exist between the functional groups of ampicillin and PU in electrospun fibers at ratios 1:10, 1.5:10, and 2:10. The effect of β‐lactam antibiotic ampicillin on the characteristics of electrospun PU was studied using XRD, TGA, and DSC. Their antibacterial property is proved by good zone of inhibition against Staphylococcus aureus and Klebsiella pneumonia. Cytotoxicity tests on the electrospun scaffolds were performed with normal human keratinocyte cells (HaCaT cells). Results indicate that ampicillin‐incorporated PU scaffolds are well suited for applications in wound healing and infection control. POLYM. ENG. SCI., 55:541–548, 2015. © 2014 Society of Plastics Engineers     

Electrospinning of antibacterial poly(vinylidene fluoride) nanofibers containing silver nanoparticles

Poly(vinylidene fluoride) (PVDF) nanofibrous mats containing silver nanoparticles were prepared by electrospinning. The diameter of the nanofibers ranged between 100 and 300 nm, as revealed by scanning electron microscopy. The silver nanoparticles were dispersed, but some aggregation was observed with transmission electron microscopy. The content of silver nanoparticles incorporated into the PVDF nanofibrous mats was determined by inductively coupled plasma and X‐ray photoelectron spectroscopy. The antibacterial activities of the samples were evaluated with the colony‐counting method against Staphylococcus aureus (Gram‐positive) and Klebsiella pneumoniae (Gram‐negative) bacteria. The results indicate that the PVDF nanofibrous mats containing silver nanoparticles showed good antibacterial activity compared to the PVDF nanofiber control. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrospun polyurethane patch in combination with cedarwood and cobalt nitrate for cardiac applications

The growth in nanotechnology led to the fabrication of scaffold at a low cost with high productivity and high surface area. The present research aims to fabricate a novel cardiac scaffold utilizing polyurethane (PU) added with cedarwood (CW) and cobalt nitrate (CoNO₃) nanofibers. Morphological analysis showed that the mean fiber diameter of the PU nanofibers was reduced owing to the incorporation of CW and CoNO₃. Infrared and thermal analysis revealed the interaction of PU with CW and CoNO₃. Contact angle studies showed that the electrospun PU/CW displayed hydrophobic nature while PU/CW/CoNO₃ showed hydrophilic behavior compared to the pristine PU. The tensile strength of PU nanofibers increased with CW and CoNO₃ addition. Atomic force microscopy analysis depicted that the PU/CW was rougher while the PU/CW/CoNO₃ as smoother surfaces than the pristine PU. According to the coagulation assay data, the blood compatibility of the electrospun composites was enhanced compared to the pristine PU. In addition, PU and its composite nanofibers exhibited non-toxic to human dermal fibroblast cells and improved cell proliferation rates compared to the control plates. To conclude, the improved physicochemical and biological response of the electrospun composites would be putative for cardiac tissue engineering. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48226.     

Study on microstructure and mechanical properties of polydiacetylene composite biosensors

10,12-Pentacosadiynoic acid (PCDA) monomers were mixed with polyurethane (PU) or poly(ethylene oxide) (PEO) and the mixtures were electrospun to obtain composite nanofibers that were then photopolymerized via ultraviolet radiation, resulting polydiacetylene (PDA) in the nanofibers. The PDA demonstrated color-changing properties in the presence of Escherichia coli, which exhibited potential for developing flexible colorimetric biosensors for medical textiles. Phase separation was found in the PEO–PDA fibers, resulting in amorphous PEO accumulation at the fiber surface. In contrast, the PU–PDA fibers demonstrated a homogeneous microstructure throughout the fibers. Tensile test results suggested a molecular orientation in the PU–PDA fibers that significantly improved the mechanical properties of the fibers. The presence of PDA in the matrix polymer reduced the overall strength and breaking elongation of both composite nanofibers in comparison to 100% PEO and PU fibers. A single PU–PDA fiber showed significantly higher stiffness and modulus than a single PEO–PDA fiber. Force–distance curve analysis suggested that the PU–PDA fibers exhibited an elastic deformation. In a comparison, the PEO–PDA fibers were brittle and showed low modulus. The results of structural and mechanical properties suggest that the PU–PDA nanofibers are a promising composite for developing nonadherent, durable, and flexible colorimetric biosensors used in medical textiles. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47877.     

Sustained release of CIP from TiO2-PVDF/starch nanocomposite mats with potential application in wound dressing

Electrospinning is an economical and alluring method to fabricate wound dressing mats from a variety of natural and synthetic materials. In this study, polyvinylidene fluoride (PVDF) and starch composite mats containing ciprofloxacin (CIP) loaded on titanium dioxide nanoparticles (TiO₂) were prepared. Fourier Transform Infrared spectra of CIP, synthesized TiO₂ NPs, TiO₂/CIP, and PVDF/starch composite mats are analyzed. Scanning electron microscopy images revealed that the fiber diameter of PVDF nanofibers thickens by increasing starch, which varies between 180 nm and 550 nm. Strain at break of PVDF, starch, PVDF/starch (2:1 w:w; P2S1), PVDF/starch (1:1 w:w; P1S1), PVDF/starch (1:2 w:w; P1S2), and nanofibers were 103 ± 11, 3 ± 0.6, 27 ± 4, 52 ± 5.2, 7.7 ± 1%, respectively. Based on strain at break and young modulus, P2S1 was selected as a suitable candidate for wound dressing to which load TiO₂/CIP as a bioactive agent. The release rate of CIP showed that about 40% of the drug is released in the first 2 days. Furthermore, the antibacterial activity of dressings was investigated using Escherichia coli and Staphylococcus aureus microorganisms and zones of clearance were obvious around the specimen on the agar plate. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48916.     

纳米纤维/海藻酸钙抗菌复合水凝胶的制备与表征

海藻酸钙水凝胶敷料作为一种"湿疗法"产品广泛用于伤口护理领域,但其无抗菌性,且缺乏细胞黏附的位点。通过将海藻酸盐和纳米氧化细菌纤维素(TOBC)共混,使用浸渍富集法负载抗菌剂聚六亚甲基双胍(PHMB)制备出一种多功能复合水凝胶,并使用场发射扫描电镜、酶标仪、激光共聚焦显微镜对复合水凝胶的结构和性能进行表征。结果表明:复合水凝胶为透明状,表面存在大量的纳米纤维,生物活性得到提高。使用0.001%PHMB溶液处理后,复合水凝胶对于大肠埃希菌和金黄葡萄球菌均具有良好抗菌效果,同时兼具优异的生物相容性。     

Electrospinning polymer blend of PLA and PBAT: Electrospinnability–solubility map and effect of polymer solution parameters toward application as antibiotic‐carrier mats

Electrospinning of a biodegradable polymer blend of poly(lactic acid) (PLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) is reported for the first time. Effects of several solution parameters on electrospinning are explored, including types of single and binary solvents, binary solvent mixing ratio, polymer blend concentration, polymer blending ratio, and loading content of tetrabutyl titanate as a compatibilizer. An electrospinnability–solubility map of the PLA/PBAT blend is firstly developed for the facile selection of a suitable binary solvent system, thus simplifying the laborious, time‐consuming, trial‐and‐error process. A particular binary solvent system derived from good and non‐solvent serves as the most suitable medium for the successful preparation of homogeneous bead‐free electrospun PLA/PBAT nanofibers. It is revealed that the compatibilizer acts not only as a diameter size tuner for the PLA/PBAT fibers but also as a mechanical property enhancer for the immiscible PLA/PBAT electrospun mats. Moreover, the antibacterial activity of the drug‐loaded PLA/PBAT fibrous mats suggests their potential application as antibiotic‐carrier mats. Preparation of the composite mats comprising bead‐free fibers with an average size at sub‐micrometer scale is also demonstrated, additionally promoting the possibility of using the PLA/PBAT‐based electrospun mats as a matrix of various additives for a wide range of applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46486.     

Electrospun polylactic acid nanofiber membranes containing Capparis spinosa L. extracts for potential wound dressing applications

Capparis spinosa L. (CSL) is a medicinal plant with high antibacterial activity against a variety of pathogens and antioxidation properties. In this paper, for the first time, nanofiber membranes of polylactic acid (PLA) containing 0, 4, 7,and 10 wt% CSL ethyl acetate extract were fabricated by electrospinning. Scanning electron microscopy showed that the fiber diameter decreased after adding CSL to the PLA nanofibers. Fourier transform infrared spectroscopy confirmed that CSL was successfully incorporated in the matrix. The water contact angle test proved that the addition of CSL improved the hydrophilic properties of the material. Moreover, the addition of CSL improved the oxidation resistance of the composite fiber membrane. A burst drug release from the composite nanofibers occurred within the first 12 hr, followed by slow release over a prolonged period of time. As the concentration of CSL increased, the inhibition ability of nanofibers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) gradually increased. In summary, due to their good mechanical, antioxidant, and antibacterial properties, CSL/PLA nanofiber membranes may possess potential applications as wound dressing materials.     

Oxidative solution polymerization of aniline hydrochloride onto electrospun nanofibers mats of polylactic acid: Preparation method and characterization

In this work, we present the preparation of polylactic acid (PLLA)/polyaniline (PANI) conductive composite nanofibers mats. They are prepared by bulk oxidative solution polymerization of PANI onto electrospun non‐woven fibers mats of PLLA. The PANI ratio in the composite is about 70%w/w. Scanning electron microscopy (SEM) shows that PLLA nanofibers are randomly oriented, beads free with diameters of 186 ± 85 nm, The PLLA/PANI composite nanofibers diameter values are 518 ± 128 nm with a good adherence between PANI and PLLA nanofibers. DSC and XRD measurements reveal an amorphous structure of the electrospun PLLA fibers due to the rapid evaporization of the solvent. FTIR and UV–vis spectra reflect good mutual interactions between PANI and PLLA chains. The DC‐conductivities ( ) far better than other published ones for similar composites prepared by bulk oxidative solution polymerization of PANI onto other electrospun nanofiber mats or with electrospun nanofibers from a solution mixture of PLLA and PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41618.     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012