Poly(2-hydroxyethylmethacrylate-co-2-folate ethylmethacrylate) and Folic acid/Poly(2-hydroxyethylmethacrylate) Solid Solution: Preparation and Drug Release Investigation

Poly(2-hydroxyethylmethacrylate-co-2-folatethylmethacrylate) was synthesized by free radical polymerization of 2-hydroxyethylmethacrylate with 2-folatethylmethacrylate and folic acid/poly(2-hydroxyethylmethacrylate) solid solutions was prepared by mixing folic acid with poly(2-hydroxyethylmethacrylate) using the solution casting method. The structure and the homogeneity distribution of folic acid in the polymer matrix are characterized by different methods. The diffusion behaviors of water and folic acid through poly(2-hydroxyethylmethacrylate-co-2-folatethylmethacrylate) and poly(2-hydroxyethylmethacrylate) matrixes were found obey to the Fick models. The in vitro cytotoxicity assessed by microculture tetrazolium test assay and the antioxidant activity of poly(2-hydroxyethylmethacrylate-co-2-folatethylmethacrylate) systems determined by 1,1-diphenyl-2-picryl-hydrazyl method revealed no significant toxicity of these systems and has excellent free radical scavenger property which can be as safe candidate in drug-carrier system. The solubility enhancement of folic acid in different pH media is also investigated and the results obtained reveal a maximum of 399–400?mg?L^?1. The release dynamic of folic acid from the poly(2-hydroxyethylmethacrylate-co-2-folatethylmethacrylate) containing 5?mol% of folic acid and that from folic acid/poly(2-hydroxyethylmethacrylate) system containing 10?mol% of folic acid have the best intestine/stomach ratio.     

Controlled drug release of 5-amino salicylic acid by poly(2-hydroxyethylmethacrylate) grafted agar

The utilization of poly (2-hydroxyethylmethacrylate) grafted agar (Ag-g-P(HEMA)) as a matrix for the controlled release of 5-aminosalicylic acid was investigated. Grafted copolymers of 2-hydroxyethylmethacrylate (HEMA) monomers on agar were synthesized by microwave assisted method. In vitro drug release studies were performed at pH values of 2 and 7 in order to investigate the possibility of pH triggered release for colon targeted drug delivery. Further, the percent grafting vs. t₅₀ (the time taken for release of 50% of the enclosed drug) value was studied and the results indicate that it may be possible to develop a programmable drug release matrix based on grafted polysaccharide. Ag-g-P(HEMA) appears to be a useful matrix for controlled release.     

Pectin grafted poly(N‐vinylpyrrolidone): Optimization and in vitro controllable theophylline drug release

The present article describes preparation, optimization, and characterization of pectin grafted polyvinylpyrrolidone hydrogels followed by controllable theophylline drug release. The gels were prepared in the presence of N,N′–methylenebisacrylamide (MBAA) crosslinker and ceric ammonium nitrate (CAN) initiator under N₂ atmosphere. Optimum conditions, in terms of percent of grafting (%G), were determined as follows: Pectin = 1.0 g, [NVP] = 2.81 mM, [MBAA] = 0.65 mM, [CAN] = 0.073 mM, polymerization temperature = 30°C and time = 4.0 hrs. Hydrogels were characterized by FTIR, TGA, DSC, XRD, and SEM. In vitro controllable release of theophylline model drug was studied using different N‐vinylpyrrolidone monomer to MBAA crosslinker ratio (i.e., [NVP]/[MBAA] ratios) and different polymerization temperatures at two pH values, namely 5.5 and 7.4. The optimum conditions for colon‐targeted vehicles that could provide the least theophylline release at pH 5.5, and the most theophylline release at pH 7.4, were as follows: [NVP]/[MBAA] = 4.33, polymerization temperature = 10°C and %G = 62.2. Such promising hydrogel characteristics may play the key role in many future drug release implementations. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

温敏聚N-异丙基丙烯酰胺的载药和释药性能研究

以对乙酰氨基酚为模型药物分子,温敏水凝胶聚N-异丙基丙烯酰胺(PNIPAAm)为载体,研究了药物在凝胶上的负载和在不同温度(25和37℃)下磷酸盐缓冲溶液(pH 7.4)中的释放行为.结果表明,对乙酰氨基酚的负载量约为35wt％,并且与载体PNIPAAm存在氢键作用.药物在磷酸盐缓冲溶液中的体外模拟释放结果显示,当温度(37℃)高于凝胶的LCST时,对乙酰氨基酚释放的较慢;当温度(25℃)低于其LCST时,释放的较快.因此,可通过环境温度的改变达到APAP在载体PNIPAAm上控制释放的目的.     

Poly(2-hydroxyethylmethacrylate-graft-folic acid), synthesis,solubility enhancement,and release dynamic of folic acid

A series of poly (2-hydroxyethylmethacrylate-graft-folic acid) (FAHEMA) systems are synthesized by grafting of folic acid (FA) into poly (2–hydroxyethylmethacrylate) via an esterification reaction. The structure of these copolymers is confirmed by NMR and CHN analyses. The thermal behavior of these materials is characterized by DSC and TGA analyses. The surface morphology of FAHEMA films before and after the release process is examined by the SEM method. The cumulative FA released in different pH media from FAHEMA materials occurred via a retro-esterification reaction at body temperature during 72 h in which the influence of the swelling degree of PHEMA, the FA content and pH media on the dynamic release is widely investigated. The results obtained revealed that the solubility of FA in water deduced from the release process is widely improved compared with literature reports. It is also revealed that the diffusion of water in different pH media through the PHEMA matrix and that of FA through FAHEMA materials perfectly obeyed the Fickian models. It was deduced from the kinetic study that the release performance is obtained with the copolymers containing initially 10 and 20 wt% of FA contents.     

Catalytic transfer hydrogenation of poly(acryloylmorpholine)-based peptide-resin assemblies and of derived peptide segments

Catalytic transfer hydrogenation using in situ generated Pd black has been used to cleave benzyl ester linked peptides from poly(acryloylmorpholine)-peptide solid (gel) phase assemblies with concurrent removal of peptide N-terminal and side-chain protecting groups. Generation of Pd black in situ also facilitates peptide deprotection by catalytic transfer hydrogenation in free solution.     

Novel porphyrin‐grafted poly(phenylene vinylene) derivatives: Synthesis and photovoltaic properties

A series of novel porphyrin‐grafted poly (phenylene vinylene) derivatives, Porp‐RO‐PPV, were synthesized by a simple two‐step method. These copolymers contain conjugated poly(phenylene vinylene) derivatives as polymer backbone and covalently linked porphyrin units as side chain, which were confirmed by FTIR and ¹H NMR, and used for photovoltaic devices. The thermal, optical properties and sensitizing effect, and photovoltaic properties have been investigated. The emission spectra of Porp‐RO‐PPV copolymers revealed the existence of strong energy transfer from PPV backbone to porphyrin units. The energy conversion efficiency (η_e) of photovoltaic devices based on Porp‐RO‐PPV+PCBM reached 0.33% (78.2 mW/cm², AM1.5) and porphyrin units in the copolymers showed good sensitizing effect at low concentration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Miscibility of poly(acrylic acid)/poly(methyl vinyl ketone) blend and in vitro application as drug carrier system

A series of poly(acrylic acid)/poly(methyl vinyl ketone) (PAA/PMVK) blends with different compositions were prepared by the solvent casting method. The miscibility of this pair of polymers was investigated by differential scanning calorimetry(DSC), Fourier transform infra-red (FTIR) and X-Ray diffraction (XRD) techniques. An in-vitro cytotoxicity test of the drug-carrier system via MTT (3-(4,5-demethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay revealed no significant cytotoxic effects at concentrations up to 100 µg· ml^?1. The STX/PAA-50 drug carrier systems were also prepared by solvent casting of solutions containing the sulfamethoxazole (STX) used as drug model and PAA/PMVK blend in N.N-dimethylformamide then crosslinked with acidified ethylene glycol. The release dynamic of STX from the prepared hydrogels was investigated in which the diffusion through the polymer matrix, the enhancement of the water solubility of STX, the influence of the initial drug concentration, the pH of the medium, and the effect of the degree of swelling of the polymer matrix on the release dynamic was evaluated. According to the total gastrointestinal transit time estimated by Belzer, the estimate distribution of STX released in the different organs indicated that the performance is obtained with the drug – carrier-system containing equal ratios of polymer and 10 wt% of STX (STX-10/PAA-50).     

可逆加成-断裂链转移聚合制备聚氯乙烯-b-聚乙二醇-b-聚氯乙烯共聚物

合成了含黄原酸酯端基的聚乙二醇（X-PEG-X）大分子链转移剂,并以其为可逆加成-断裂链转移试剂调控氯乙烯（VC）溶液和悬浮聚合,合成聚氯乙烯-b-聚乙二醇-b-聚氯乙烯（PVC-b-PEG-b-PVC）三嵌段共聚物。X-PEG-X调控VC溶液聚合得到的共聚物的分子量随聚合时间增加而增大,分子量分布指数小于1.65。X-PEG-X具有水/油两相分配和可显著降低水/油界面张力的特性,以X-PEG-X为链转移剂和分散剂,通过自稳定悬浮聚合也可合成PVC-b-PEG-b-PVC共聚物,共聚物颗粒无皮膜结构,分子量随聚合时间增加而增大;由于VC悬浮聚合具有聚合物富相和单体富相两相聚合特性,共聚物分子量分布指数略大于溶液聚合共聚物。通过乙酸乙烯酯（VAc）扩链反应进一步证实了PVC-b-PEG-b-PVC的“活性”,并合成PVAc-b-PVC-b-PEG-b-PVC-b-PVAc共聚物。水接触角测试表明PVC-b-PEG-b-PVC的亲水性优于PVC。     

Synthesis,degradation, and drug delivery of cycloaliphatic poly(ester anhydride)s

The high melting point of poly(1,4‐cyclohexanedicarboxylic anhydride) [poly(CHDA)] is a disadvantage, in that it is intractable in the melting process of a drug delivery system. This report relates to diols introduced into the polyanhydride main chain to decrease its melting point. Various poly(ester anhydride)s containing ethylene glycol, 1,3‐propanediol, 1,4‐butanediol, or 1,6‐hexandiol [poly(CHDA–XDO)] were synthesized by the esterification reaction and melt polycondensation. FTIR, DSC, WAXD, and intrinsic viscosity of polymers were recorded and hydrolytic degradation, as well as in vitro drug delivery, was conducted. The results show that the samples are stable in an anhydrous environment at room temperature and degrade in water following a surface erosion mechanism. The degradation period of poly(CHDA–XDO) ranged from 130 to 320 h as a result of the different diols and amounts of XDO introduced. The in vitro drug delivery gave 130–350 h of stable delivery along with the typical surface erosion mechanism. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2509–2514, 2002     

Synthesis and characterization of novel grafted amphoteric poly(propylene) fabrics

Novel grafted amphoteric poly(propylene) (PP) fabrics were prepared by γ‐irradiation, which induced grafting of methacrylic acid (MA) onto PP fabric. A subsequent reaction of PP–MA grafted chains with freshly prepared (3‐chloro‐2‐hydroxylpropyl)amine or diamine chloride compounds followed by purification yielded the corresponding amphoteric PP fabrics. The latter were characterized by elemental microanalysis for the determination of the percentage nitrogen. Fourier transform infrared and scanning electron microscopy were performed on methacrylic and amphoteric PP fabrics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2504–2510, 2003     

Inverse emulsion polymerization-assisted designing of superparamagnetic poly (2-hydroxyethyl methacrylate) nanoparticles and magnetically triggered release of cisplatin

Superparamagnetic nanocarriers of poly (2-hydroxyethyl methacrylate) (PHEMA) were prepared by carrying out benzoyl peroxide (BPO) initiated inverse emulsion-free radical polymerization of HEMA in the presence of poly (vinyl alcohol) (PVA) and subsequent in situ precipitation of magnetite within the PHEMA matrix. The as-prepared nanoparticles were characterized by FTIR and UV–visible spectroscopy, vibrating sample magnetometry (VSM), particle size and zeta potential analysis, and transmission electron microscopy, respectively. The PHEMA nanocarriers were investigated for their blood compatibility, and cytotoxicity response to L929 cells. The superparamagnetic nanoparticles were loaded with an anticancer drug cisplatin and the release profiles of the drug were examined as a function of various experimental parameters like composition of the PHEMA nanocarriers, percentage of drug loading, and strength of the externally imposed magnetic field. The kinetics of the drug release process was also investigated, and the obtained release data were applied to different mathematical kinetic models to explore the nature of the release mechanism.     

Microwave assisted synthesis of poly(2-hydroxyethylmethacrylate) grafted agar (Ag-g-P(HEMA)) and its application as a flocculant for wastewater treatment

Poly(2-hydroxyethylmethacrylate) chains were grafted onto the backbone of agar using a microwave assisted method involving a combination of microwave irradiation and ceric ammonium nitrate to initiate the grafting reaction. The synthesized graft copolymers were characterized by intrinsic viscosity measurements, Fourier transform infrared spectroscopy, elemental analysis (C, H, N, O and S) and scanning electron microscopy. Ag-g-P(HEMA)-2 showed a much higher flocculation efficacy than agar. The optimized dosage of flocculation for Ag-g-P(HEMA)-2 in the wastewater was found to be 0.75 ppm. Compared to agar, Ag-g-P(HEMA)-2 was found to considerably reduce the pollutant load in the wastewater.     

Biodegradable amphiphiles of grafted poly(lactide) onto 2‐hydroxyethyl methacrylate‐co‐N‐vinylpyrrolidone copolymers as drug carriers

This article describes the synthesis and characterization of 2‐hydroxylethyl methacrylate‐co‐N‐vinylpyrrolidone copolymers, (HEMA‐co‐NVP), via free radical polymerization followed by grafting of poly(lactide) onto (HEMA‐co‐NVP) copolymers, via ring opening polymerization using tin octoate as a catalyst. The copolymers and the grafted copolymers (i.e., amphiphiles) were subjected to sustained release studies using salicylic acid, as a model drug. Characterization of the formed copolymers was performed using ¹H‐NMR, ¹³C‐NMR, FTIR, TGA, DSC, and SEM techniques. Derivative of TGA thermogram was used to determine %hydrophilicity and %hydrophobicity in the grafted and ungrafted copolymers. The SEM morphology revealed porous layers with crispy structure that were most likely due to the presence of poly(lactide) chains. At lower content of poly(lactide) moiety, grafted copolymers showed non‐Fickian diffusion release rate, whereas Fickian diffusion release rate at higher content of poly(lactide) was observed. The increase of poly(lactide) content (i.e., larger %hydrophobicity) in the copolymer increased the drug‐sustainability, due to the consistent but porous amphiphilic degradable structures that allow controllable release of drug in time interval. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(2-hydroxyethyl methacrylate) (PHEMA)/poly(styrene-co-acrylamide) (PSAm) blends: miscibility and hydrogel properties

The blend miscibility of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(styrene-co-acrylamide) (PSAm) was studied by DSC. A ‘miscible window’ was found in the range 47–57 mol% of acrylamide in blending PSAm with PHEMA (1:1 w/w) and was analysed by the mean-field theory. The water content and permeability coefficients of proteins were measured. The results show that the water content of the blends depends on the composition of PSAm and the blends, and the behaviour of blends swollen in water in Fickian type. However, the permeability of the solutes not only related to water content, but was also affected by phase behaviour. Controlled release of somatotropin from a cylindrical device coated with PHEMA/PSAm was achieved.     

Fabrication of micelles from poly(butylene succinate) and poly(2‐methacryloyloxyethyl phosphorylcholine) copolymers as a potential drug carrier

A series of copolymers of poly(2‐methacryloyloxyethyl phosphorylcholine)‐b‐poly(butylene succinate)‐b‐poly(2‐methacryloyloxyethyl phosphorylcholine) (PMPC‐b‐PBS‐b‐PMPC) were synthesized by atom transfer radical polymerization. The structure of the polymers was characterized by ¹H NMR and infrared spectroscopy, and their thermal properties were described using TGA and DSC. In aqueous solutions, the PMPC‐b‐PBS‐b‐PMPC could form micelles with sizes ranging from 108 to 170 nm. In vitro release studies showed that acidic media and a longer PMPC chain benefited doxorubicin (DOX) release. 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assays indicated that the micelles had low cytotoxicity to HeLa and L929 cells. DOX‐loaded micelles exhibited high cytotoxicity to HeLa cells. Flow cytometry results demonstrated that DOX‐loaded micelles could be internalized by HeLa cells. The in vitro phagocytosis results showed 3.9‐fold and 5.5‐fold reductions compared with poly(lactic acid) (PLA) nanoparticles and PDS55 micelles. These results demonstrate that PMPC‐b‐PBS‐b‐PMPC block copolymer micelles have great promise for cancer therapy. © 2017 Society of Chemical Industry     

表面引发原子转移自由基聚合制备甲基丙烯酸甲酯接枝废胶粉及其表征

采用原子转移自由基聚合法研究了废胶粉(GTR)的表面化学接枝改性,包括2-溴异丁酰溴(BIBB)与GTR表面羟基的反应,以及形成的大分子引发剂引发甲基丙烯酸甲酯(MMA)的接枝聚合反应;用红外光谱和X射线光电子能谱仪、热重分析和扫描电子显微镜对接枝改性反应前后的GTR表面进行了表征.结果表明,GTR表面含有一定量羟基,...     

Dehydration of water‐plasticized poly(vinyl alcohol) systems: particular behavior of isothermal mass transfer

BACKGROUND: Water‐plasticized poly(vinyl alcohol) has been obtained by thermal processing. Dehydration is the key process for controlling the structure and performance of the water‐soluble polymer, and mass transfer is an important part of dehydration. RESULTS: A simple new model of a hyperbolic‐type function was developed to understand the mass transfer process of water‐plasticized poly(vinyl alcohol) systems during isothermal dehydration. The model was verified by statistical tests. The physical parameters in the model were defined as the maximum weight loss fraction and characteristic time. The dehydration rate, the key physical parameter in mass transfer, was obtained from the differential equation of the model. By use of the model, the characteristics of dehydration of poly(vinyl alcohol) were determined: the complete mass transfer process can be divided into a fast mass transfer before a characteristic time (τ) and a slow mass transfer after τ, and dehydration temperatures can also be divided into two intervals by different activation energies. In addition, the dehydration rate is inversely proportional to the degree of crystallinity. CONCLUSION: The results of the new model agree reasonably well with experimental results obtained by thermogravimetry and weighing. Poly(vinyl alcohol), as a water‐soluble semicrystalline polymer, exhibits a particular mass transfer behavior during dehydration. Copyright © 2008 Society of Chemical Industry     

Atom transfer radical polymerization synthesis and association properties of amphiphilic pullulan copolymers grafted with poly(methyl methacrylate)

Amphiphilic copolymers of pullulan grafted with poly(methyl methacrylate) (PMMA) were synthesized by atom transfer radical polymerization under homogeneous mild conditions without using protecting group chemistry. The hydroxyl groups of pullulan were reacted with 2‐bromoisobutyryl bromide to prepare pullulan macroinitiators with various degrees of substitution. Kinetic study showed that the polymerization was first order. The copolymers were characterized using ¹H NMR spectroscopy and gel permeation chromatography. The molecular weights of the grafted chains were controlled and polydispersities were low. Association properties in aqueous solution were studied using ¹H NMR spectroscopy, dynamic light scattering and transmission electron microscopy. Spherical nanoparticles with size and size distribution significantly affected by the number and length of the grafted chains were formed. Graft copolymers with a degree of substitution of 5.3% and length of PMMA grafted chains from 5 to 35 repeating units formed well‐defined quite monodisperse spherical nanoparticles with hydrodynamic diameters in the range 20–40 nm. This means that nanoparticle size can be tuned by changing the length of the grafted chains for this degree of substitution. Less control of aggregate size was obtained for a degree of substitution of 1.0%. Copyright © 2010 Society of Chemical Industry     

Kinetic investigation of ZrO2, Y2O3, and Ni on poly(vinyl butyral) thermal degradation using nonlinear heating functions

The effects of zirconia (ZrO₂), yttria (Y₂O₃), and nickel (Ni) on poly(vinyl butyral) (PVB) thermal degradation were evaluated using kinetic analysis of TGA data and nonlinear heating rates. An exact solution derived from the Arrhenius equation in an integration form was used for the kinetic analysis. The kinetic parameters of the thermal degradation reaction were determined utilizing the solution and the isoconversional principle. Results show that the reaction pathway of the PVB thermal degradation was altered by the presence of these inorganic materials except ZrO₂. The strong catalytic effects of Y₂O₃, and Ni on the PVB degradation were found and discussed according to the analytical results. The reaction rate was accelerated faster in lower temperatures in the presence of Y₂O₃, and Ni. The degradation period of the PVB/Ni sample appeared the shortest for these cases. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2552–2559, 2006