3D mesoporous bioactive glass/silk/chitosan scaffolds and their compatibility with human adipose-derived stromal cells

Human adipose-derived stem/stromal cells (hASCs) have been popularly studied as cell-based therapy in the field of regenerative medicine due to their ability to differentiate into several cell types. In this study, in order to improve the mechanical strength and bioactivity of scaffolds for bone tissue engineering, three types of mesoporous bioactive glasses with different shapes and compositions were dispersed in the silk fibroin/chitosan (SF/CS)-based scaffolds, which were fabricated with a combination of freezing and lyophilization. The characteristic and physical properties of these composite scaffolds were evaluated. The biocompatibility was also assessed through hASCs in vitro tests. Both Alamar Blue® and Live/Dead assay® revealed that the spherical mesoporous bioactive glass doped scaffolds enhanced cell viability and proliferation. Furthermore, the addition of spherical mesoporous bioactive glass into SF/CS scaffolds encouraged hASC osteogenic differentiation as well. These results suggested that this composite scaffold can be applicable material for bone regeneration.     

Three-dimensional silk impregnated HAp/PHBV nanofibrous scaffolds for bone regeneration

Three-dimensional silk fibroin impregnated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibrous scaffolds with or without hydroxyapatite (HAp) were prepared by wet-electrospinning method followed by freeze-drying. Scaffolds with cotton wool-like structure have the average fiber diameter of 450–850?nm with 80–85% porosity. In-vitro cell culture tests using MG-63 osteosarcoma human cells revealed improved cell viability, alkaline phosphatase (ALP) activity and total cellular protein amount on the silk impregnated scaffolds compared to PHBV and HAp/PHBV scaffolds after 10 days of cell culture. Immunohistochemical analyses on the silk impregnated scaffolds showed that HAp triggered cell penetration and type I collagen production. Besides, HAp mineralization tendency increased with a decrease in percent crystallinity of the scaffolds comprising HAp and silk after 4 weeks of incubation in simulated body fluid. Consequently, cotton wool-like HAp/PHBV-SF scaffold would be a promising candidate as a bone-filling material for tissue regeneration.     

丝素/羧甲基壳聚糖复合材料的制备及其在丝绸文物加固中的应用

为了对脆弱丝绸文物进行保护修复，延长其寿命，本研究以丝素蛋白（SF）、羧甲基壳聚糖（CMCS）为原料，谷氨酰胺转氨酶为交联剂，制备丝素/羧甲基壳聚糖复合材料（SF/CMCS），并将其应用于老化丝绸加固保护。选用傅里叶变换红外光谱（FT-IR）、X-射线衍射仪（XRD）、测色配色分光光度计、扫描电镜（SEM）及伺服高低温控制拉伸机对老化丝绸加固前后效果进行表征。结果表明，与老化丝绸相比，SF/CMCS加固丝绸的颜色无明显变化，物理机械性能有明显提升，抗张强度和断裂伸长率分别提升了379.12%、14.12%%，且有一定的抗菌性。     

Silk fibroin/chitosan/heparin scaffold: preparation,antithrombogenicity and culture with hepatocytes

Antithrombogenicity is very important for tissue engineering scaffolds used in situations involving contact with blood. A silk fibroin/chitosan (SFCS) scaffold has been developed for liver tissue engineering with porous structure, suitable mechanical properties and biocompatibility. Because the interaction between silk fibroin and blood coagulation factors can lead to blood coagulation, the anticoagulant property of the SFCS scaffold should be improved. Heparin was added into SFCS scaffold under mild conditions. The effects of heparin on the morphology, swelling properties, structure, porosity, mechanical properties, antithrombogenicity and cytocompatibility of the SFCS scaffold were studied. SFCS scaffold containing heparin maintains the porous structure and good mechanical properties of the fibroin‐based scaffold; moreover, it is not cytotoxic. Addition of heparin leads to the SFCS scaffold being blood‐compatible and an effective heparin‐delivering system. The anticoagulant property of the SFCS scaffold can be improved by the addition of heparin, which may be helpful for scaffolds used in situations involving contact with blood. Copyright © 2009 Society of Chemical Industry     

Supercritical carbon dioxide assisted fabrication of biomimetic sodium alginate/silk fibroin nanofibrous scaffolds

In this study, biomimetic sodium alginate (SA)/silk fibroin (SF) scaffolds were successfully fabricated by supercritical CO₂ technology. The SA/SF scaffolds exhibited an interconnected porous and extracellular matrix (ECM)-like nanofibrous structures. Moreover, the SA microparticles were embedded in the SF scaffolds. Increasing the content of SA microparticles could improve tensile strength and compressive strength of the SF scaffolds and reduce the porosity of the SF scaffolds. The addition of the SA microparticles could also regulate the degradation rate of the SA/SF scaffolds. Furthermore, the results of in vitro biocompatibility evaluation, indicated that the SA/SF scaffolds exhibited no obvious cytotoxicity and higher cell adhesion ability and were more favorable for L929 fibroblasts proliferation than pure SF scaffolds. Therefore, the SA/SF scaffolds with ECM-like nanofibrous and interconnected porous structure have potential application in skin tissue engineering.     

An Injectable Enzymatically Crosslinked and Mechanically Tunable Silk Fibroin/Chondroitin Sulfate Chondro-Inductive Hydrogel

An injectable hybrid hydrogel is synthesized, comprising silk fibroin (SF) and chondroitin sulfate (CS) through di-tyrosine formation bond of SF chains. CS and SF are reported with excellent biocompatibility as tissue engineering scaffolds. Nonetheless, the rapid degradation rate of pure CS scaffolds presents a challenge to effectively recreate articular cartilage. As CS is one of the cartilage extracellular matrix (ECM) components, it has the potential to enhance the biological activity of SF-based hydrogel in terms of cartilage repair. Therefore, altering the CS concentrations (i.e., 0 wt%, 0.25 wt%, 0.5 wt%, 1 wt%, and 2 wt%), which are interpenetrated between SF β-sheets and chains, can potentially adjust the physical, chemical, and mechanical features of these hybrid hydrogels. The formation of β-sheets by 30 days of immersion in de-ionized (DI) water can improve the compression strength of the SF/CS hybrid hydrogels in comparison with the same SF/CS hybrid hydrogels in the dried state. Biological investigation and observation depicts proper cell attachment, proliferation and cell viability for C28/I2 cells. Gene expression of sex-determining region YBox 9 (SOX9), Collagen II α1, and Aggrecan (AGG) exhibits positive C3H10T1/2 growth and expression of cartilage-specific genes in the 0.25 wt% and 0.5 wt% SF/CS hydrogels.     

静电纺丝工艺参数对丝素/壳聚糖纳米纤维的形貌及直径的影响

以98%的甲酸为溶剂,不同质量分数的再生丝素溶液和3.5%的壳聚糖溶液以质量比70:30共混静电纺丝。用扫描电子显微镜(SEM)观察了丝素质量分数、电压和极距(喷丝口到收集装置的距离)对丝素/壳聚糖纳米纤维的形貌及直径的影响。正交试验结果表明:在丝素/壳聚糖溶液静电纺丝的工艺参数中,对纤维平均直径的影响因素由大到小依次为丝素质量分数、电压、极距。单因素试验表明:丝素/壳聚糖纳米纤维的平均直径及其分布范围随丝素质量分数的增加而增大;在15￣30kV范围内纤维的平均直径随电压增大而减小;当极距大于12cm时,对纤维直径影响不大。最佳工艺条件为:丝素质量分数13%,电压30kV,极距为12cm,制得的纳米纤维平均直径104nm。     

Structure and physical properties of silk fibroin/polyacrylamide blend films

This article deals with the characterization of blend films obtained by mixing silk fibroin (SF) and polyacrylamide (PAAm). The DSC curves of SF/PAAm blend films showed overlapping of the main thermal transitions characteristic of the individual polymers. The exothermic peak at 218°C, assigned to the β‐sheet crystallization of silk fibroin, slightly shifted to a lower temperature by blending. The weight‐retention properties (TG) of the blend films were intermediate between those of the two constituents. The TMA response was indicative of a higher thermal stability of the blend films, even at low PAAm content (≤25%), the final breaking occurring at about 300°C (100°C higher than pure SF film). The peak of dynamic loss modulus of silk fibroin at 193°C gradually shifted to lower temperature in the blend films, suggesting an enhancement of the molecular motion of the fibroin chains induced by the presence of PAAm. Changes in the NH stretching region of silk fibroin were detected by FTIR analysis of blend films. These are attributable to disturbance of the hydrogen bond pattern of silk fibroin and formation of new hydrogen bonds with PAAm. The values of strength and elongation at break of blend films slightly improved at 20–25% PAAm content. A sea–island structure was observed by examining the air surface of the blend films by scanning electron microscopy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1563–1571, 1999     

丝素/羧甲基壳聚糖共混膜的结构与性能

利用丝素(SF)与羧甲基壳聚糖(CMCS)共混制取不同比例的SF/CMCS共混膜。研究了CMCS诱导的丝素构象转变行为,测试了共混膜的吸湿性、透湿性和保水性。当CMCS的质量分数为5%时,共混膜中丝素的构象以β-折叠为主;当CMCS的质量分数为10%时,共混膜中丝素的构象由β-折叠向α-螺旋发生转变;当CMCS的质量分数达到15%时,共混膜中丝素的构象向无规卷曲发生转变。当CMCS质量分数小于15%时,共混膜中SF与CMCS具有良好的相容性,溶胀度较小,吸湿性随CMCS含量的增加而迅速降低。     

Preparation and characterization of polyhydroxybutyrate‐co‐hydroxyvalerate/silk fibroin nanofibrous scaffolds for skin tissue engineering

Nanofibrous scaffolds were obtained by co‐electrospinning poly (3‐hydroxybuty‐rate‐co‐3‐hydroxyvalerate) (PHBV) and fibroin regenerated from silk in different proportions using 1,1,1,3,3,3‐hexafluoro‐2‐isopropanol (HFIP) as solvent. Field emission scanning electron microscope (FESEM) investigation showed that the fiber diameters of the nanofibrous scaffolds ranged from 190 to 460 nm. X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy analysis (FT‐IR) showed that the main structure of silk fibroin (SF) in the nanofibrous scaffold was β‐sheet. Compared to the PHBV nanofibrous scaffold, the surface hydrophilicity and water‐uptake capability of the PHBV/SF nanofibrous scaffold with 50/50 were improved. The results of cell adhesion experiment showed that the fibroblasts adhered more to the PHBV/SF nanofibrous scaffold with 50/50 than the pure PHBV nanofibrous scaffold. The proliferation of fibroblast on the PHBV/SF nanofibrous scaffold with 50/50 was higher than that on the pure PHBV nanofibrous scaffold. Our results indicated that the PHBV/SF nanofibrous scaffold with 50/50 may be a better candidate for biomedical applications such as skin tissue engineering and wound dressing. POLYM. ENG. SCI., 55:907–916, 2015. © 2014 Society of Plastics Engineers     

Fibroin membrane preparation and stabilization by polyethylene glycol diglycidyl ether

Membranes prepared by drying aqueous Bombyx mori silk fibroin (SF) solution and modified silk fibroin (MSF) solutions, prepared by adding the low molecular weight crosslinking agent, polyethylene glycol diglycidyl ether (PEGDE) MW 526, 0–10% w/w, were investigated by Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) spectroscopy, and UV–vis spectroscopy. Weight gain in aqueous solutions and their mechanical properties (tensile strength, elongation, and Young's modulus) were then characterized. SEM measurements revealed greater porosity in MSF membranes. IR spectra showed transformation from the largely α‐helical/random coil structures in SF membranes to predominantly β‐sheet in MSF membranes. Results from UV–vis spectroscopy showed that the MSF membranes were largely insoluble within the pH range of 4–10. Water absorbability of the MSF membranes improved with increasing the amounts of cross‐linker, up to 4%. The MSF membranes showed greater pliability and tenacity, but lower tensile strength, with increasing PEGDE concentrations. In the wet condition, PEGDE levels up to 4% can improve both tensile strength and tenacity of the MSF membrane, but higher levels (up to 10%) did not significantly change these properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Biodegradable nanofibrous membrane of zein/silk fibroin by electrospinning

BACKGROUND: Electrospinning of natural polymers offers a promising approach to generate nanofibers with a similar fibrillar structure to that of native extracellular matrix. In the present work, zein/silk fibroin (SF) blends were electrospun with formic acid as solvent to fabricate bicomponent nanofibrous scaffolds for biomedical applications. RESULTS: The zein/SF electrospun nanofibers had a smaller diameter and narrower diameter distribution than pure zein nanofibers, and the average diameter gradually decreased from 265 to 230 nm with increasing SF content in the blend. The predominant presence of α‐helix zein structure and random coil form of silk I in blend fibrous membranes was confirmed from Fourier transform infrared spectral and wide‐angle X‐ray diffraction data, while conversion to the β‐sheet structure of SF was also detected. The tensile strength of the zein/SF fibrous membranes was improved as the content of SF in the blend fibers increased. A preliminary study of in vitro degradation and cytotoxicity evaluated by MTT assay indicated that biodegradable zein/SF fibrous membranes did not induce cytotoxic effects in an L929 mouse fibroblast system. CONCLUSION: Biodegradable zein/SF fibrous membranes with good mechanical properties and cytocompatibility combine the beneficial characteristics of the individual components and may be useful for biomedical applications. Copyright © 2009 Society of Chemical Industry     

再生丝素/壳聚糖共混纳米纤维的结构与性能

以98%的甲酸为溶剂,不同质量分数的再生丝素溶液和3.5%的壳聚糖溶液以质量比70∶30共混静电纺丝。测定了壳聚糖的含量对共混膜的结构及力学、溶解等性能的影响。结果表明:随着壳聚糖相对含量的增加,丝素β化程度提高,纤维结晶度增大,丝素与壳聚糖以70∶30共混时的溶失率最小;甲醇处理后,溶失率明显降低;共混纳米纤维的断裂强度随着壳聚糖相对含量的增大而增加,柔软性也逐渐提高;共混纤维膜具有优异的抗菌性。     

Fabrication and characterization of silk/forsterite composites for tissue engineering applications

In this research, novel composite scaffolds consisting of silk fibroin and forsterite powder were prepared by a freeze-drying method. In addition, the effects of forsterite powder contents on the structure of the scaffolds were investigated to provide an appropriate composite for bone tissue engineering applications. The morphology studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques showed that the forsterite ceramic was well distributed throughout the structures of SF/forsterite scaffolds. Furthermore, the forsterite powder (up to 40 wt%) was homogenously distributed within the silk fibroin as a matrix.     

A novel silk fibroin‐supported iron catalyst for hydroxylation of phenol

The aim of this study was to explore the potential use of silk fibroin (SF) as a catalyst support material for phenol hydroxylation reactions. Iron‐substituted silk fibroin fibers were prepared using formic acid at room temperature and characterized using inductively coupled plasma atomic‐emission spectrometry, scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR) and optical microscopy. Measurement of an FTIR spectrum showed that the secondary structure was β‐structure before and after iron substitution. To evaluate the catalytic properties of prepared catalyst, phenol hydroxylation reaction was carried out using aqueous hydrogen peroxide as an oxidant. An excellent transformation of phenol into dihydroxybenzenes (catechol and hydroquinone) was achieved. Phenol conversions of 3.3%, 61.2%, and 80.3% were obtained at room temperature, 40 °C and 60 °C respectively. It was found that no further phenol conversion proceeded because catalysts became separated from the reaction system during the reaction. No significant leaching of the iron was detected. Catalyst could be reused several times without a significant change in activity. Parent silk fibroin fibers without iron were inactive. Copyright © 2006 Society of Chemical Industry     

聚乳酸/丝素共混膜的制备及其性能

用分子量为10万的聚乳酸（PLLA）对丝素膜进行改性,研究不同的聚乳酸加入量对丝素膜性能的影响,对聚乳酸/丝素共混膜进行了一系列表征。万能电子试验机的测试结果表明,经聚乳酸改性后,丝素膜的断裂强度,断裂伸长率有了较大的改善,当加入聚乳酸占丝素质量为5%时,丝素膜的强度可达到27.1 MPa,伸长率达4.4%; 改性后的丝素膜的亲水性有一定程度降低,溶失率则明显减小,透汽透湿性也有所提高;红外光谱测试表明,改性后的丝素膜含有较多的β构象成分。     

丝素蛋白/聚丙烯酸共混膜仿生合成羟基磷灰石

将丝素蛋白(SF)与聚丙烯酸(PAA)共混,制备丝素蛋白/聚丙烯酸(SF/PAA)共混膜;然后将此共混膜进行改性及矿化处理后,放置于(37±0.5)℃人体仿生液中24h,诱导合成丝素蛋白/羟基磷灰石(SF/HA)复合材料.利用傅里叶红外(FTIR)、X-射线衍射(XRD)、环境扫描电镜(ESEM)以及X射线能谱(EDX...     

Metal ion permeation properties of silk fibroin/chitosan blend membranes

Silk fibroin/chitosan (SF/CS) blend membranes were prepared and characterized by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy. It was found that SF and CS were compatible in the blend membranes and that the membranes were dense without microscopic phase separation. Swelling experiments showed that the swelling ratio of the blend membranes increased with CS content and reached the highest value when CS content was 70 wt%. Experiments indicated that the permeability coefficient of K⁺ through the blend membrane was 2–4 times higher than that of pure CS membrane, and 10 times higher than that of pure SF membrane. The permeation rate of K⁺ increased linearly with CS content in the blend membrane for the lower concentration feeding solution. For different metal ions, the permeability through SF/CS blend membranes was in the sequence K⁺ > Ca²⁺ > Cd²⁺ > Pb²⁺ > Cu²⁺ > Ni²⁺. Copyright © 2006 Society of Chemical Industry     

A new method to prepare porous silk fibroin membranes suitable for tissue scaffolding applications

A new method to prepare porous silk fibroin (SF) membranes without dialysis is proposed. Silk fibers were degummed to remove sericin and the resultant fibroin was dissolved in a CaCl₂‐CH₃CH₂OH‐H₂O ternary solvent. Rather than undergoing dialysis, a fibroin salty solution was diluted in water and then submitted to a mechanical agitation that led to a phase separation through foam formation on the solution surface. This foam was continually collected and then compacted between plates to remove the excess of water. The membranes presented large pores with diameters of greater than 100 μm (as shown by scanning electron microscopy ‐ SEM), porosity of 68% and water content of 91% w/w. X‐ray diffraction (XRD) and infrared spectroscopy (FTIR‐ATR) indicated that the membranes present SF in a β‐sheet structure even before the ethanol treatment. A typical elastic deformation profile and degradation under temperature were observed using calorimetric analysis (DSC), thermal gravimetric analysis (TGA) and mechanical tests. As indicated by the in vitro cytotoxicity tests, these membranes present potential for use as scaffolds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Comparative study on eri silk and mulberry silk fibroin scaffolds for biomedical applications

Mulberry silk fibroin is being used as biomaterial for tissue engineering applications. In the present work, comparisons are made between mulberry and eri silk fibroin scaffolds prepared by electrospinning method. The scaffolds are treated with ethanol to improve their dimensional stability, and the physical and chemical properties of the scaffolds are assessed using thermogravimetric analyzer (TGA), differential scanning calorimetry, Fourier transform infrared spectroscopy and X-ray diffractometry. The FTIR spectra confirm the structural change of silk fibroin from α-helical to β-sheet structure when mulberry and eri silk scaffolds are treated with ethanol. The thermal stability of the eri silk scaffold is found to be better than that of mulberry silk. Ethanol-treated eri silk displays higher tensile stress than the ethanol-treated mulberry silk. The hemolysis percentages of eri silk and mulberry silk scaffolds are found to be 1 and 3 %, respectively. While the platelet adhesion on eri silk fibroin scaffold is found to be lower than that of mulberry silk fibroin scaffold, the cell attachment, binding and spreading of L6 fibroblast cells on the eri silk scaffold are better than those on the mulberry silk fibroin, and the cell viability is found to be better on eri silk fibroin scaffold.