Effect of Fe2O3 Loading Amount on Catalytic Properties of Monolithic Fe2O3/Ce0.67Zr0.33O2 -Al2O3 Catalyst for Methane Combustion

Ce0.67Zr0.33O2-Al2O3 solid solution was prepared by the co-precipitation method. Fe2O3-based catalysts supported on the solid solution were obtained by the impregnation method. The article revealed that the optimal loading amount of Fe2O3 on Ce0.67Zr0.33 O2-Al2O3 in our experimental condition for catalytic combustion of methane was 8% （ mass fraction）. The prepared catalysts were characterized by BET, TPR, XRD analyses, and their catalytic activity was investigated after being calcined at 873 K and after being aged in water gas at 1273 K. When the loading amount of Fe203 was 8% （ mass fraction）, the catalyst held the highest activity, and the best temperature speciality and thermal stability. The complete-conversion temperature of methane for fresh and aged sample was 788 and 838 K, respectively. The range between the light-off temperature and the complete-conversion temperature was only 15 K. The characterization results of XRD indicated that Fe2O3 was well dispersed on the Ce0.67Zr0.33O2-Al2O3 matrix. The results of BET and TPR were in good harmony with the catalytic activity results.     

Preparation of La0.9RE0.1MnO3 Ultra-fine Particles Used for CH4 Oxidation

Ｐｅｒｏｖｓｋｉｔｅ ｔｙｐｅｏｘｉｄｅｓ (ｇｅｎｅｒａｌｆｏｒｍｕｌａＡＢＯ3 )ｈａｖｅｂｅｅｎａｔｔｒａｃｔｉｎｇｍｕｃｈａｔｔｅｎｔｉｏｎｆｏｒｍｏｒｅｔｈａｎｔｗｏｄｅｃａｄｅｓｄｕｅｔｏｔｈｅｉｒｐｏｔｅｎｔｉａｌｃｏｍｍｅｒｃｉａｌａｐｐｌｉｃａｔｉｏｎｓａｓｃａｔａｌｙｓｔｓｆｏｒｖａｒｉｏｕｓｒｅａｃｔｉｏｎｓ :ｏｘｉｄａｔｉｏｎｏｆＣＯ[1～ 3 ] ａｎｄｌｉｇｈｔｈｙ ｄｒｏｃａｒｂｏｎｓ[4～ 7] ,ｃｏｍｂｕｓｔｉｏｎｏｆｎａｔｕｒａｌｇａｓｏｒＣＨ4 [8～ 1 1 ] (ｔｏｃｏｎｔｒｏｌＮ…     

NiO-Ce0.5Zr0.5O2 catalysts prepared by citric acid method for steam reforming of ethanol

NiO-Ce0.5Zr0.5O2catalysts were prepared by citrate method and used for hydrogen production from steam reforming of ethanol (SRE). The effect of nickel content and space velocity on the catalytic performance was investigated. The prepared catalysts were character-ized with XRD and thermal analysis techniques. 20%NiO-Ce0.5Zr0.5O2 catalyst was very active and selective for hydrogen production via SRE, in which ethanol conversion of 100% could be obtained with feed component of 20% (H2O+EtOH) and 80% N2, water/ethanol of 3/1 in molar ratio at 350 ℃. Also, the catalyst showed good stability for anti-sintering and carbon-resistance. The XRD illuminated that both NiO and Ce0.5Zr0.5O2 crystal sizes were very small in NiO-Ce0.5Zr0.5O2 catalyst, and Ce0.5Zr0.5O2 solid solution was formed.     

Catalytic combustion study of soot on Ce0.7Zr0.3O2 solid solution

The Ce0.7Zr0.3O2 solid solution and CeO2 were prepared using the sol-gel method. The phase structure, crystallite sizes and the reducibility of the catalysts were characterized by XRD and H2-TPR techniques. XRD results indicated that Zr^4＋ had replaced part of Ce^4＋ to form a fluorite-like solid solution, which was favorable to obtain ultrafine nanoparticles. The ratio of main HE consumption for Ce0.7Zr0.3O2：CeO2 was 4.4：1.0, implying that the solid solution could improve the reducibility compared to the single CeO2. The Ce0.7Zr0.3O2 solid solution catalyst showed a sharp combustion peak at 397 ℃, which was 200 ℃ lower than that of the single soot. The good catalytic activity of the Ce0.7Zr0.3O2 was attributed to the formation of nano-CeO2-based solid solution, which enhanced the reducibility and then improved the combustion activity. As Ce0.7Zr0.3O2 could be easily reduced to Ce0.7Zr0.3O2-x meanwhile, after oxygenation, the Ce0.7Zr0.3O2.x was recovered to Ce0.7Zr0.3O2 completely. A catalytic combustion reaction mechanism was proposed： the Ce0.7Zr0.3O2 was reduced to Ce0.7Zr0.3O2-x by the reaction with carbon and then it was recovered to Ce0.7Zr0.3O2-x by the interaction with O2.     

Study of methane autothermal reforming catalyst

The effects of Ce-ZrOx, Ce-LaOx, Ce-SmOx and Ce-GdOx additions to Rh/Al2O3 catalysts on methane autothermal re-forming were investigated. Activity tests showed that the addition of Ce-ZrOx could significantly reduce the concentration of CO in reformats. When Ce/Zr atomic ratio was 1：1, C%.5Zr0.5O2 solid solution with high thermal stability was obtained, which could effec- tively improve the catalytic performance effectively. The additives of alkaline-earth metals （Mg, K and Ca） on the catalytic properties were also studied. The results of experiments showed that the addition of MgO to Rh/Ce0.5Zr0.5O2/Al2O3 improved the stable per- formance and the carbon resistance of the catalyst. The optimized catalyst was 0.1%Rh/2.0%MgO/40%Ce0.5Zr0.5O2/Al2O3, which showed a highly stable performance for methane autothermal reforming.     

Study on Rare Earth Electrolyte of Ce_(0.9)RE_(0.1)O_(2-δ) (RE=Pr, Nd, Sm, Gd, Dy)

Thesolidelectrolyteisakeycomponentofsolidoxidefuelcell (SOFC) .Dopedceriaisoneofpromis inghigh conductingsolidelectrolyteinSOFC[1,2 ] .Butitiswell knownthatitisdifficulttosinterdopedceriabysolidstatereactioninair .TheCe0 .9RE0 .1O2 -δelectrolytematerialswerepreparedbythesol gelmethod .Thesinteringtemperatureofthesamplescandecreasetoabout 4 0 0K .Theionicconductivityandlinearthermalexpansionpropertiesofsol gelpreparedCe0 .9RE0 .1O2 -δinawidetemperaturerangewerein vestigated .Thepowder…     

铈锆钇氧化物固溶体的水热法制备及性能表征

采用水热法制备了Ce0.6Zr0.3Y0.1O1.95固溶体。采用XRD、分子荧光光度仪及透射电镜对其进行了表征,结果表明,Ce0.6Zr0.3Y0.1O1.95具有立方萤石结构,形成了单相的纳米级复合氧化物固溶体。将其作为固体酸催化剂应用于乙酸、正丁醇的酯化反应,考察了酸醇比、反应时间和催化剂重复使用等因素对乙酸转化率的影响,确定最优反应条件是:酸醇比1∶1,反应时间2.5 h,乙酸转化率为43.20%。作为一种固体酸,它具有较高的酸催化活性。催化剂易与反应液分离。反复使用几次后,其催化活性基本保持不变。     

Promotional effects of cerium doping and NO_x on the catalytic soot combustion over MnMgAlO hydrotalcite-based mixed oxides

A series of MnMgAlO samples with different amounts of Ce doping were facilely prepared using coprecipitation method and their catalytic soot combustion activity was evaluated by temperature programmed oxidation reaction(TPO).The methods of X-ray diffraction(XRD),Brumauer-Emmett-Teller(BET),H2-TPR,NO-TPO and in situ IR were used to characterize the physiochemical properties of these samples.Dopant Ce improved the soot combustion performance of MnMgAlO catalyst due to the enhanced redox ability.Introduction of NOx led to the further increase of catalytic soot oxidation activity on these samples.Over Ce-containing samples,the catalytic activity was slightly decreased as the amount of dopant Ce increased in O2.Differently,in NO+O2,a certain amount of dopant Ce was much more favorable and excess amount of Ce resulted in a sharp drop of the catalytic soot combustion activity.Both NO2 and nitrates were found to have great contributions to the effects of NOx on the soot combustion activity of Ce-doped catalysts.More NO2 was generated as dopant Ce increased.When appropriate amount of Ce was introduced,the as-formed NO2 was stored as bridging bidentate nitrate on Mn-Ce site,which was confirmed to have higher reactivity with soot than nitrite or monodentate nitrate on Mn and/or Ce sites.Overall,Mn0.5Mg2.5Ce0.1Al0.9O was considered as the most potential catalyst for soot combustion.     

Characterization and CO Catalytic Oxidation of CuO／Ce-Zr-La-O Catalyst

The Ce-Zr-La-O solid solution was prepared by the sol - gel method. The structure and the redox behavior of Ce-Zr-La-O solid solution and CuO/Ce-Zr-La-O catalysts were investigated by using XRD, Raman and TPR techniques. The result shows that the reduction capability of Ce0.7Zr0.3-y LayO solid solution is related to content of La. Appropriate content of La can enhance the redox capability of the solid solution. The oxidation activity of the CuO (6%)/Ce0.7Zr0.15La0. 15O catalyst is the highest. CuO, which finely dispersed and interacted with the support, is the site of oxidation activity.     

贵金属/铈锆铽固溶体催化剂的制备与台架性能评价

用Ce0.6Zr0.3Tb0.1O2作为储氧材料,分别制备了实尺寸的全钯三效催化剂和双层钯、铂、铑三效催化剂。为作对比,同时制备了含商用铈锆固溶体的双层钯、铂、铑三效催化剂。在发动机台架上对所制备的催化剂进行了活性评价。3种催化剂具有较高的三效催化活性,在交叉点附近对CO和NOx的转化率接近100%,对THC的转化率接近90%。双层催化剂和单层全钯催化剂相比,不仅在富燃区具有较高的NOx转化率,而且具有较低的起燃温度。含Ce0.6Zr0.3Tb0.1O2固溶体的双层催化剂的性能优于含商用铈锆固溶体的催化剂。     

Synthesis of mesoporous CeO2-MnOx binary oxides and their catalytic performances for CO oxidation

Mesoporous CeO2-MnOx binary oxides with different Mn/Ce molar ratios were prepared by hydrothermal synthesis and characterized by scanning electron microscopy （SEM）, N2 sorption, X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and H2 temperature-programmed reduction （H2-TPR）. The characterization results indicated that the CeO2-MnOx catalysts exhibited flower-like microspheres with high specific surface areas, and partial Mn cations could be incorporated into CeO2 lattice to form solid solution. The CeO2-MnOx catalysts showed better catalytic activity for CO oxidation than that prepared by the coprecipitation method. Furthermore, the CeO2-MnOx catalyst with Mn/Ce molar ratio of 1 in the synthesis gel （Ce-Mn-1） exhibited the best catalytic activity, over which the conversion of CO could achieve 90% at 135 ℃. This was ascribed to presence of more Mn species with higher oxida- tion state on the surface and the better reducibility over the Ce-Mn-I catalyst than other CeO2-MnOx catalysts.     

Construction of mesoporous ceria-supported gold catalysts with rich oxygen vacancies for efficient CO oxidation

Bearing unique redox nature and high oxygen storage capacity, ceria (CeO₂) has always been a promising CO oxidation catalyst support for gold (Au) catalysts and the like. Herein, a series of Au–CeO₂–P (P stands for pH value) samples was prepared by a co-precipitation method with the assistance of an alkaline environment and amino groups functionalized ordered mesoporous polymer (OMP-NH₂). Afterward, all samples described above were characterized that the Au–CeO₂–P catalysts are made of Au–Ce–O solid solution and Au nanoparticles (NPs) supported on CeO₂. It turns out that OMP-NH₂ is not just a simple sacrificial template for mesoporous structure, but also plays an important role as an amino source, explaining the presence of rich oxygen vacancies. Due to the concentration of oxygen vacancies in Au–Ce–O solid solution is the key factor for the oxygen mobility of CO oxidation, the catalytic results also demonstrate that the catalytic activity of Au–CeO₂–P catalysts is related to the concentration of their oxygen vacancies. Moreover, Au–CeO₂-9.6 with a highest concentration of oxygen vacancies (as high as 13.98%) in Au–CeO₂–P catalysts exhibits the best catalytic activity (complete conversion at 10 °C).     

Effect of CuO species and oxygen vacancies over CuO/CeO2 catalysts on low-temperature oxidation of ethyl acetate

The catalytic oxidation of ethyl acetate(EA) was studied over CuO/CeO₂ catalysts which were prepared by ball milling with different precursors(copper oxide,cerium acetate,cerium dioxide,copper acetate and cerium hydroxide).The CuO/CeO₂ catalyst(O-A) prepared with copper oxide and cerium acetate as precursors shows very high catalytic activity that 100% EA conversion is achieved at low temperature of 220℃.It is found that specific surface area(112.8 m²/g),particle...     

Rare earth oxide modified Cu-Mn compounds supported on TiO₂ catalysts for low temperature selective catalytic oxidation of ammonia and in lean oxygen

Selective catalytic oxidation(SCO) of ammonia was carried out over Cu-Mn compounds catalysts modified with trivalent rare earth oxide Ce2O3 and La2O3 respectively.TiO2 was used as support and different ratio of O2 were tested in order to find an appropriate O2 concentration(vol.%),and the results showed that 1%O2(vol.%) was propitious to SCO of ammonia.The effects of the two rare earth oxides modified catalysts Ce2O3-Cu-Mn/TiO2 and La2O3-Cu-Mn/TiO2 on the catalytic activity and selectivity of ammonia oxidation were investigated under the reaction condition of 500 ppm ammonia,1%O2(vol.%),at the temperature from 125 to 250 oC.The results revealed the beneficial role of Ce2O3 and La2O3 in catalytic activity at low temperature and lean oxygen concentration,while the modification with Ce2O3 and La2O3 led to the negative influence on N2 selectivity.For the catalysts modified with Ce showed lower NO and N2O selectivity than the catalysts modified with La,then the effects of different Ce loadings on catalytic activity and selectivity were also considered,in combination with catalysts preparation methods,which include incipient wet impregnation,sol-gel method and co-precipitation.Results revealed that the catalysts prepared by sol-gel method obtained preferable catalytic activity compared with the others,reaching 99% ammonia at 200 oC,whereas 96% NO was detected.It also indicated that different catalyst preparation method significantly determined production distribution.     

Effects of MO_x(M=Mn,Cu,Sb,La)on V-Mo-Ce/Ti selective catalytic reduction catalysts

A series of MO_x-V_2O_5-MoO_3-CeO_2/TiO_2(M=Mn,Cu,Sb,and La) catalysts were prepared via an impregnation method.The physico-chemical properties of the catalysts were characterized and their NH_3-SCR of NO performance was compared.The Mn-loaded catalyst(Mn5V1Mo3Ce7/Ti) exhibits a large number of acid sites of varying strength,and together with good reducibility of the catalyst,contributes to the optimal SCR performance.The sulphate species formed in the presence of SO_2 significantly enhance the H_2O and SO_2 tolerance of Mn5V1Mo3Ce7/Ti.The Cu-loaded catalyst(Cu5V1Mo3Ce7/Ti)demonstrates potential in flue gas applications in the absence of SO_2 at low temperatures because of the excellent redox ability observed and the high degree of weak acid sites.The Sb and La loaded catalysts(Sb5V1Mo3Ce7/Ti and La5V1Mo3Ce7/Ti),especially La5V1Mo3 Ce7/Ti,exhibit the largest number of acid sites and the lowest reducibility,and therefore,may be suitable for use in high temperature denitrification applications.     

Palladium catalysts supported on novel CexY1-xO washcoats for toluene catalytic combustion

Novel CexY1-xO washcoats adhered on the cordierite honeycomb, used as supports for Pd catalysts, were prepared by an impregnation method. It was fotmd that the CexY1-xO washcoats had better adhesion and higher adsorption efficiency of H2PdCl4, and the optimal component of the washcoat was Ce0.8Y0.2O. Model reaction of catalytic combustion of toluene was chosen to evaluate the performance of the developed Pd/CexY1-xO/substrate catalysts. The results showed that the catalytic performance of the Pd/CexY1-xO/substrate catalysts depended on the component of the washcoats, with the Pd/Ce0.8Y0.2O/substrate catalyst giving the best catalytic activity and thermal stability.     

Promotional effects of cerium doping and NOx on the catalytic soot combustion over MnMgAIO hydrotalcite-based mixed oxides

A series of MnMgA10 samples with different amounts of Ce doping were facilely prepared using coprecipitation method and their catalytic soot combustion activity was evaluated by temperature programmed oxidation reaction （TPO）. The methods of X-ray diffraction （XRD）, Brumauer-Emmett-Teller （BET）, H2-TPR, NO-TPO and in situ 1R were used to characterize the physio- chemical properties of these samples. Dopant Ce improved the soot combustion performance of MnMgA10 catalyst due to the en- hanced redox ability. Introduction of NOx led to the further increase of catalytic soot oxidation activity on these samples. Over Ce-containing samples, the catalytic activity was slightly decreased as the amount of dopant Ce increased in 02. Diftbrently, in NO＋O2, a certain amount of dopant Ce was much more favorable and excess amount of Ce resulted in a sharp drop of the catalytic soot combustion activity. Both NO： and nitrates were found to have great contributions to the effects of NOx on the soot combustion activity of Ce-doped catalysts. More NO2 was generated as dopant Ce increased. When appropriate amount of Ce was introduced, the as-formed NO2 was stored as bridging bidentate nitrate on Mn-Ce site, which was confirmed to have higher reactivity with soot than nitrite or monodentate nitrate on Mn and/or Ce sites. Overall, Mno.sMg2.sCeo.lAlo.90 was considered as the most potential catalyst for soot combustion.     

Effect of metal doping into Ce0.5Zr0.5O2 on catalytic activity of MnOx/Ce0.5-xZr0.5-xM0.2xOy/Al2O3 for benzene combustion

The research investigated the effect of doping two metals separately or together into Ce0.5Zr0.5O2 on the catalytic activity of MnOx/Ce0.5–xZr0.5–xM0.2xOy/Al2O3 (M=Y, Mn, Y and Mn) for catalytic combustion of benzene. The prepared catalysts were characterized by X-ray diffraction (XRD), surface area analysis, oxygen storage capacity (OSC), and H2-temperature programmed reduction (H2-TPR). Cata-lytic test was performed on a conventional fixed bed flow reactor. The characterization results revealed that Y and Mn ions entered into the ceria-zirconia mixed oxides framework, which improved the textural properties and greatly promoted the MnOx dispersion on the support surface. The complete conversion temperature of benzene on MnOx/Ce0.4Zr0.4Y0.1Mn0.1Oy /Al2O3 was 563 K, and the selectivity of carbon dioxides was 99%. This catalyst could be applied in a wide range of GHSV and wide concentration condition, showing great potential for application.     

Preparation of ultrafine Ce-based oxide nanoparticles and their catalytic performances for diesel soot combustion

The ultrafine Ce-based oxide nanoparticles with different element dopings （Zr, Y） were synthesized by the method of mi- cropores-diffused coprecipitation （MDC） using ammonia solution as the precipitation agent. The activities of the catalysts for soot oxidation were evaluated by the temperature-programmed oxidation （TPO） reaction. Ce-based oxides prepared in this study exhibited high catalytic activity for soot oxidation under tile condition of loose contact between soot particles and catalysts, and the catalytic ac- tivity ofultrafine Ce0.gZr0 iO2 nanoparticle for soot combustion was the highest, whose/＂10, Ts0 and Sco2m was 364, 442 ~C and 98.3%, respectively. All catalysts were systematically characterized by means of X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, Brumauer-Emett-Teller （BET）, Fourier transform infrared spectroscopy （FT-IR） and UV-Vis diffuse reflectance spectroscopy （UV-Vis DRS）. It was indicated that the MDC method could prepare the ultrafine Ce-bascd oxide nanoparticles whose the crystal lattice were perfect, and the BET surface area and average crystal size of the ultrafine nanoparticles changed with the different element dopings （Zr, Y）. The H2-TPR measurements showed that the ultrafine Ce-based ox- ide nanoparticles with the doping-Zr cation could be favorable for improving the redox property of the catalysts.     

汽车尾气净化催化剂用CexZr1-xO2固溶体的研究进展

综述了 Ce O2 和 Ce XZr1 - XO2 固溶体在汽车尾气净化催化剂中的作用、铈锆氧化物的体相结构及影响铈锆氧化物固溶体储氧能力 (OSC)和织构热稳定性的因素 ,并对其在催化剂中的应用作了简要阐述。