Pyrolytic Trifluoromethylation of [76]-, [78]-, [84]-, and Aza[60]Fullerenes with Silver Trifluoroacetate; Evidence for Coordination of Fullerenes to Silver

Pyrolytic trifluoromethylation of [76], [78], [84], and aza[60]fullerenes with silver trifluoroacetate at 300°C results in extensive polyaddition of up to 18, 18, 20 and 20 CF₃ groups, respectively. In contrast to trifluoromethylation of [60]- and [70]fullerenes that give a full range of derivatives ranging upwards from C_n(CF₃)₂, [76]-, [78]-, and [84]-fullerenes only give C_n(CF₃)_6-18 derivatives, largely in the 10-12 CF₃ range; reaction with [76]fullerene is accompanied by formation of C₆₀(CF₃)₆ attributed to cage fragmentation. For aza[60]fullerene the hexa-addition level dominates, in contrast to its other reactions which give predominantly penta-addition products. All the compounds showed peaks at 1256±2 and 1180-1190 cm^-1, due to the CF₃ group, and peaks in this region are shown also by the soluble extract obtained on trifluoromethylation of nanotubes. As in trifluoromethylation of [60]- and [70]-fullerenes, the products obtained initially are involatile, attributed to formation os silver complexes; these are decomposed on subsequent solution in toluene. Mixed isomeric trifluoromethylated C₆₀F₈ derivatives viz. C₆₀F₇CF₃, C₆₀F₆(FG₃)₂, C₆₀F₅(CF₃)₃ and C₆₀F₄(CF₃)₄, and C₆₀F₄CF₃CF₂CF₃ (a C₆₀F₆ derivative) have been isolated from fluorination of [60]fullerene with MnF₃/K₂NilF₆ at 510°C.     

HPLC Diode-Array Analysis of C60 and C70 Polymeric Fullerene Oxides (Fullerene Polymeric Ozonides)

It is shown by HPLC diode-array analysis that the C₆₀ and C₇₀ polymeric fullerene oxides ([C₆₀]-PFOs and [C₇₀]-PFOs) which are polymeric ozonides, are composed by nine different components. The ozonide derivatives of C₆₀ and C₇₀ have been proved to be practically analogous in chemical structure and composition. The most important component of both [C₆₀]-PFOs and [C₇₀]-PFOs accounts for about 3/4 of each sample. The overozonation of [C₆₀]-PFOs in methanol has been studied and shown to not produce any significant changes.     

Spectroscopic Evidence for Anionic Coordination Complexes of the Transition Metals with C70 and the Higher Fullerenes C76, C78, C82, C84, C86, C90, and C92

The carbonylate anions [M(CO)₅]^- (M = Mn, Re), [Co(CO)₄]^-, [CpFe(CO)₂]^-, and [CpM(CO)₃]^- (M = Mo, W) react with C₇₀ via single electron transfer processes to give, respectively, the corresponding 17-electron, metal-centered radicals Co(CO)₄, M(CO)₅ (M = Mn, Re), CpFe(CO)₂, and CpM(CO)₃ (M = Mo, W) in addition to the radical anion C₇₀^-. In secondary thermal or photochemical processes, the metal-centered radicals Co(CO)₄ and M(CO)₅ (M = Mn, Re) combine with the C₇₀^- to form the new η²-C₇₀ complexes [Co(CO)₃(η²-C₇₀)]^- and [M(CO)₄(η²-C₇₀)]^-. However, the metal-centered radicals CpM(CO)₃ (M = Mo, W) require photolysis to react with C₇₀^- to form [CpM(CO)₂(η²-C₇₀)]^-, whereas neither thermolysis nor photolysis induces reaction between CpFe(CO)₂ and C₇₀^-. The photochemical reaction of [Mn(CO)₅]^- with a mixture of higher fullerenes known to contain at least C₇₆, C₇₈, C₈₄, C₈₆, and C₉₀ resulted similarly in the formation of the higher fullerene complexes [Mn(CO)₄(η²-C_n)]^- (n = 76, 78, 80, 82, 84, 86, 88, 90, 92, 96, and 98), all identified using electrospray mass spectrometry.     

UNSTABLE PRODUCTS FROM THE OZONATION OF C60 IN SOLVENTS

The ozonation of a solution of C₆₀ in toluene results in the formation of several unstable compounds C₆₀X and C₆₀Y[1-5] which decay completely at room temperature within about 1 h. The products are oxides C₆₀O[6,6], C₆₀O₂[I], C₆₀O₂[II], and possibly an isomer of C₆₀O₃. The transformations are not due to oxidation by atmospheric oxygen but are spontaneous. The ozonation of a solution of C₆₀O[6,6] in toluene results in the formation of two unstable compounds C₆₀Z[1-2] which also decay completely to C₆₀O₂[I] and C₆₀O₂[II]. It is suggested that all unstable “parents” are ozonides.     

Spontaneous Decay of Highly-Charged Fullerene Ions C60Z and C58z

Using isotope-resolved, two sector field mass spectrometric techniques we have identified and investigated quantitatively the energetics and kinetics (in particular the kinetic energy release, KER) of the spontaneous decay reactions C_60-2m^z+ → C_60-2m-p(z-1)+ ₊ C_p⁺ with m = 0 or 1, z ranging from 3 to 6 and p = 2 and 4. The obtained KER results are not compatible with the properties expected for a single-step fissioning reaction as described by the liquid drop model. Therefore the present data had to be interpreted by a different fragmentation mechanism. This novel reaction sequence, termed auto charge transfer (ACT) reaction, is initiated by the statistically driven neutral C₂ (or C₄₎ evaporation followed by an electron transfer process from the receding C₂ (or C₄) fragment to the remaining highly-charged fullerene ion thereby leading finally to the two charged reaction products observed in the exit channel of the decay reaction. Moreover, in the case that a C₂⁺ loss from C₆₀z+ is occurring in the first field-free region we have been able to demonstrate that it is possible to observe in the second field-free region a subsequent C₂ evaporation from the C₅₈(z-1)⁺ fragment ion.     

Arylation of [60]Fullerene with Br2/FeCl3/PhH: Formation of C58 Derivatives via CO Loss

Heating a mixture of [60]fullerene, bromine, ferric chloride and benzene under reflux for 24 h products a range of phenylated [60]fullerene derivatives. The main product is C₆₀Ph₅H but other components identified by mass spectrometry (and in some cases separated by HPLC) are: C_6oPh_n(n = 4, 6, 8, 10, 12), C₆₀Ph_nO₂(n = 4, 6, 8, 10, 12), C₆₀Ph_nOH (n = 7, 9, 11), C₆₀Ph_nH₂ (n = 4, 10), C₆₀Ph₄H₄, C₆₀Ph₅H₃, C₆₀Ph_n0₂H (n = 5, 9), C₆₀Ph₄C₆H₄O₂, C₆₀Ph₉OH₃, and C₆₀Ph₁₁ O₃H₂. In the corresponding reaction with toluene, the crude reaction mixture contained C₆₀(MeC₆H₄)₄ as a main product; C₆₀(ClC₆H₄)₅H was obtained from the reaction with chlorobenzene. Formation of these derivatives is believed to involve radical bromination of the fullerene, followed by electrophilic substitution of the hatogenofullerene into the aromatic, accompanied in some case by hydrolysis, elimination and epoxide formation; oxidation may also introduce ketone/dioxetane functionality. The EI mass spectra of C₆₀Ph₄O₂ and C₆₀Ph₈O₂show degradation to C₅₈Ph_n (n = 0-8), having structures believed to be related to the pseudofollerenes C₆₈Ph_n (n = 0-8) reported recently. These results suggest that some derivatisations of fullerenes confer stability, due to the relief of strain.     

Synthesis of Calix[4, 5, 6] Resorcinarenes Using Fullerene C60 as Template

We present a new use of fullerene C₆₀ as a template for the synthesis of cyclic resorcinarenes, The cyclocondensation of 2-methyl-resorcinol with benzaldehyde and hexanal in THF, catalyzed by AlCl₃, in the presence of 1%, 5%, and 10% fullerene C₆₀, produces calix[4], [5], and [6] resorcinarenes, with the pentamer and hexamer as the major products. The resorcinarenes were characterized by ¹H, ¹³C NMR, FTIR, FAB⁺ mass spectrometry, and elemental analysis.     

The Solid-State Mechanochemical Reaction of Fullerene C60

The solid-state mechanochemical reaction of fullerene C₆₀ by the use of a high-speed vibration milling technique has been applied to the nucleophilic addition of an organozinc reagent to C₆₀, [4+2] cycloaddition of C₆₀ with condensed aromatic hydrocarbons, 1,3-dipolar addition of C₆₀ with organic azides, and dimerization of C₆₀.     

Stone-Wales Rearrangement Pathways from the Hinge-Opened [2+2] C60 Dimer to Ipr C120 Fullerenes. Vibrational Analysis of Intermediates

Possibility of the previously proposed hinge-opened product 2 of [2+2] C₆₀, dimer 1 transforming itself into IPR C₁₂₀ fullerenes by a series of generalized Stone-Wales (GSW) rearrangements has been tested by seeking all topologically acceptable pathways with the help of a graphical search program. the first IPR isomer 4 appeared after 20 GSW steps from the wide-bridged dumb-bell shaped precursor 3. More than 1,000 C₁₂₀ fullerene structures were generated during subsequent ten GSW steps, but the outstanding T_dC₁₂₀ global minimum 5 was not reached. Semiempirical vibrational calculations predict characteristic transition in the vibrational spectra in the course of rearrangement pathway.     

Synthesis of Heterocycle-Containing [60]Fullerene Derivatives. II.1 Recent Progress in [4 2]- and [3 2]-Cycloaddition Routes

Recent progress of synthesis of C₆₀ derivatives functionalized with hetero-cycles is reviewed, focusing attention on [4+2]- and [3+2] cycloaddition methodologies and oxidative heterocyclization.     

ISOLATION AND CHARACTERISATION OF C60(CF3)2

From the products of reactions of [60]fullerene with either K₂PtF₆ at 470 °C or AgF at 520 °C, we have isolated C₆₀(CF₃)₂, the simplest trifluoromethylfullerene, which gives a single ¹⁹F NMR line at -69.5 ppm. The HPLC retention time is less than that of C₆₀F₂ confirming the trend observed for other fluoro- vs. trifluoromethylfullerenes namely that the latter elute more rapidly. Other trifluoromethyl- containing species, C₆₀(CF₃)₄O, C₆₀F₅CF₃, C₆₀(CF₃)₄H₂, C₆₀(CF₃)₆H₂, and C₆₀(CF₃H)₃ were detected in the product mixture.     

Thermally Activated Decay Processes of Isolated Superhot C60 in Molecular Beams

We have studied thermally activated decay processes of an ensemble of isolated superhot C₆₀ molecules in molecular beams by several different methods. Highly vibrationally excited C₆₀ molecules in effusive or supersonic beams (with average vibrational energy of 10-20 eV) were generated in an all ceramic, two-stage high temperature nozzle source. the decay kinetics due to various decay processes of the initially canonical ensemble was followed by a mass spectrometric methods for a large range of initial temperatures (T_o=1100 - 1950 K). the processes studied are: (1) fragmentation (C₂ emission) of the neutral C₆₀ (2) C₂ emission from the C⁺₆₀ ions (3) black-body like radiative cooling, and (4) delayed electron emission. the experiments described here are: (a) Depletion of the integrated C₆₀ flux. (b) Analysis of C₆₀ time-of-flight distributions. (c) Dependence of electron impact induced ionization/ fragmentation of C₆₀ upon its initial thermal excitation, and (d) Thermal energy dependence of delayed electron emission. It is shown that thermal kinetics models using a single set of independently measured parameters uniquely reproduce all the experimental observations. the models take into account the different cooling processes and their time evolution. We analyze in detail the evolution of the initially canonical vibrational energy distribution during the flight time to the detector as it is gradually being distorted due to evaporative and radiative cooling mechanisms. It is concluded that the correct parameters to be used for describing the thermally activated decay kinetics of superhot C₆₀ are activation energy of E_o = 4.3 - 4.8 eV for the neutral fragmentation channel C₆₀ → C₅₈ + C₂ and E₁=4.0 - 4.3 for the ion fragmentation channel C⁺₆₀→ C⁺₅₈ + C₂, and corresponding pre-exponential factors of A_o = A₁ = 2.5 × 10¹³ sec^-1. the emissivity coefficient for black body like radiation was found to be ε = 4.5 × 10^-5.     

Photochemical Reaction of Furans in the Presence of [60] Fullerene

The first evidence was presented which supports a photochemical pathway during the reaction of furan derivatives in the presence of C₆₀, which was formerly believed to proceed via a thermal [2+4]-concerted cycloaddition reaction of furans with C₆₀. LD-TOF-MS, UV-vis, FT-IR and ¹H-, ¹³C-NMR spectra showed that     

Synthesis and Spectral Characterization of Difunctional Fullerenes

The oxidation of C₆₀ with m-chloroperbenzoic acid gave C₆₀O₂ with a high positional selectivity, as the ¹³C NMR analysis suggested. Diadducts C₆₀CCI₂O, C₆₀CCl₂(anthracene), C₆₀CCl₂[(CH₂CH₂)₂N₂], and C₆₀CCI₂[Pt-(PPh₃)₂] were synthesized, isolated, and characterized by negative ion FAB mass spectroscopy.     

软模板导向合成多级孔丝光沸石及其苯的苄基化催化性能

通常认为丝光沸石是具有一维孔道结构的微孔沸石, 在涉及大分子的催化反应中存在较为严重的扩散限制。以双季铵型表面活性剂C₁₈H₃₇N⁺(CH₃)₂C₆H₁₂N⁺(CH₃)₂C₆H₁₃(Br^-)₂(C_18-6-6Br₂)作为软模板, 在水热条件下制备了多级孔丝光沸石分子筛。采用XRD、FT-IR、SEM、TEM、TG-DTG、N₂物理吸附、NH₃-TPD等手段对样品的晶体结构和物化性能进行了表征。结果表明, 加入C_18-6-6Br₂制备了纳米棒定向排列的多级孔丝光沸石, 而且可通过改变合成体系中C_18-6-6Br₂/SiO₂的比值, 对样品的晶粒尺寸、介孔表面积和介孔孔容进行系统调变。在苯与苯甲醇的苄基化反应中, 多级孔样品比传统微孔丝光沸石表现出更好的苄基化反应催化性能和显著提高的反应速率。多级孔丝光沸石优异的催化性能归因于介孔的存在使其具有更多的可接近活性位和更优异的质量传输性质, 这种独特的多级孔丝光沸石在大分子催化转化反应中具有较大的应用潜力。     

Synthesis and Characterization of Dialkyl-C61

Three-step synthesis from dialkyl ketone (R₂C=O) with C₆₀ gave C₆₀(CR₂)_n [R = Me, Et, Pr, Bu, (CH₂)₅.; n = 1, 2]. The adducts were isolated by means of gel permeation chromatography, and the monoadducts were characterized by ¹H and/or ¹³C NMR spectroscopies as a mixture of major [5, 6] and minor [6, 6] isomers. Their solubility and electrochemical properties were reported.     

GROUP TRANSFER AND DIMERIZATION PROCESSES OF C60(CN)2 UNDER ATMOSPHERIC PRESSURE IONIZATION CONDITIONS

Neutral and anionic C₆₀(CN)₂ were investigated with electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) mass spectrometry. It was observed that its anions underwent cyano- group and oxygen transfer, and dimerization processes in ESI conditions to form C₆₀(CN)₃H^-, C₆₀(CN)₂(OH₂)^-, [C₆₀(CN)₃H]^-₂, [C₆₀(CN)₂(OH₂)]^-₂ and [(C₆₀)₂(CN)₂(OH)]^-. Meanwhile, neutral C₆₀(CN)₂, for which no signal was observed in ESIMS, showed a base peak corresponding to C₆₀(CN)₂Cl^- in APCIMS spectra with CHCl₃ used as solvent, while only a molecular ion peak corresponding to C₆₀(CN)^-₂ was observed for the toluene solution of neutral C₆₀(CN)₂ in the same conditions. Possible mechanisms for group transfer and dimerization were proposed based on these observations.     

Regiochemistry of Azide Additions to [70]Fullerene

In this paper we report for the first time on the reaction of C₇₀ with alkyl azides and show that the [3+2]-cycloaddition occurs preferably at bond 7 followed by bond 5 to give two regioisomeric A/B-triazolines and one C/C-triazoline Thermal extrusion of N₂ from these triazolines leads to open [5,6]-bridged iminofullerenes as A/A- and B/C-isomers as well as to the ring closed [6,6]-bridged analogues as A/B- and C/C-isomers. These results are in line with the corresponding thermal reaction of C₇₀ with diazomethane.     

Ag glasses based on Zn-phosphate

The partial substitution of Zn²⁺ for Ag⁺ in Ag₄P₂O₇ leads to the formation of a wide glassy domain of composition [Ag₄P₂O₇] _(1−y) [Zn₂P₂O₇] _(y) with 0.20y0.87. The introduction of AgI in these materials results in a new series of glasses of formula [(Ag₄P₂O₇)_(1−y) (Zn₂P₂O₇)_(y)] _(1−X) [AgI] _(x), which domain for the composition y = 0.25 corresponds to 0x 0.64. The structure as well as the thermal and electrical properties of these materials are compared with those of the [AgPO₃] _(1−X) [AgI] _(x) and [Ag₄P₂O₇] _(1−x) [AgI] _(x) glasses.     

Magnetic Properties of Some Fullerene Compounds

Magnetic properties of some fullerene intercalation compounds are detailed. A few examples are presented including properties of 1) Acceptors: MoF₆ From magnetic measurements the existence of positively charged C₆₀ (C₆₀⁺) can be inferred 2) Donnors: Yb_xC₆₀ and Eu₃C₆₀ compounds. Magnetic properties of (Yb_xC₆₀) are dominated by crystal field effects. A high field magnetic transition (17 T at 4 K) occurs in Eu₃C₆₀ associated with a large hysteresis of the magnetization and relaxation effects. This complex magnetic behaviour is attribued to Eu²⁺.