Antigen detection on resin sections and methods for improving the immunogold labeling by manipulating the resin

Considering the importance of immunolocalization of cellular substances combined with good ultrastructure and ease of use, this review is focused on the use of resin and the possibilities of manipulating the resin before and after embedding in order to improve the immunolabeling of resin sections for electron microscopy. The qualities of acrylic resins and conventional epoxy resin for immunoelectron microscopy are discussed. Acrylic sections are usually more suited for immunoelectron microscopy than conventional epoxy sections. Different etching procedures (sodium ethoxide or sodium metaperiodate) may be applied to conventional epoxy sections to enhance the yield of immunolabeling. Lately, a method which does not involve any kind of etching has been developed for enhancing the immunogold labeling of epoxy sections up to about 8 times. This method involves increased concentration of accelerator in the epoxy resin mixture when processing the tissue. The ultrastructural preservation of the tissue is important in immunoelectron microscopical procedures, and not only the intensity of the immunolabeling; in this respect no resin may compete with the widely used epoxy resins.     

Sulphated glycosaminoglycans in guinea pig eosinophils studied by means of cationic colloidal gold

Using bone marrow embedded in hydrophilic resin Lowicryl K4M and cationic colloidal gold pH 1.0 labelling, we studied sites of sulphation and sulphated glycosaminoglycans ultrastructurally in various maturational stages of both eosinophil granulocytes and eosinophil granules of guinea pig. Eosinophil granules reacted positively to cationic gold, the pattern of labelling varying according to the degree of cell maturation. The formation of eosinophil granules takes place throughout the myelocyte stage. Early eosinophil myelocytes contain a large Golgi apparatus with active granulogenesis, while late ones contain a small and less active Golgi apparatus. All the immature granules were labelled positively. However, mature granules with a central crystal bar lost their affinity towards colloidal gold. Interestingly, strong colloidal gold labelling was also observed in the trans to transmost Golgi apparatus, especially in immature eosinophil granulocytes. This indicates that sulphation of glycosaminoglycans occurs in the trans to transmost Golgi apparatus of eosinophil granulocytes. Prior absorption with poly-L-lysine prevented colloidal gold labelling of tissue sections. Methylation of sections at 37 degrees C did not alter the gold labelling, whereas the labelling disappeared after methylation at 60 degrees C. Prior treatment with chondroitinase ABC or heparinase I abolished the majority of colloidal gold labelling in immature eosinophil granules. Taking these results together, we conclude that immature eosinophil granules contain sulphated glycosaminoglycans including chondroitin sulphate or heparan sulphate or both.     

Silver-enhanced diaminobenzidine-sulfide (SEDS): a technique for high-resolution immunoelectron microscopy demonstrated with monoamine immunoreactivity in monkey cerebral cortex and caudate

A common frustration of immunoelectron microscopy (IEM) is the density of the 3,3'-diaminobenzidine (DAB) label, which obscures intracellular details of labeled structures. To overcome this problem, a silver enhancement protocol was developed which leaves silver deposits on very low levels of DAB. The resulting label is composed of easily visualized punctate silver deposits, localized in processes with little or no detectable DAB. This technique incorporates several modifications into previously described methods for silver enhancement of DAB. The principal innovation is to pretreat the DAB label with sodium sulfide before silver enhancement, which substantially increases the sensitivity of the silver enhancement. In addition, cysteine was used in place of thioglycolic acid to suppress tissue argyrophilia, allowing use of both glutaraldehyde- and paraformaldehyde-fixed tissue without degradation of ultrastructure. We demonstrate this technique with dopamine, norepinephrine (NE), and serotonin (5HT) immunoreactivity in monkey prefrontal cerebral cortex and with dopamine immunoreactivity in the anterior caudate. The punctate label allows essentially unobscured visualization of the intracellular details and cell membranes of these monoamine axons. Whereas 5HT axons formed small asymmetric synapses, dopamine and NE axons typically formed small symmetric synapses with notably subtle membrane specializations. It is likely that these are often obscured by conventional DAB labeling. The use of several preparations indicates that this technique will be useful with a variety of antibodies. It might also provide an attractive alternative to colloidal gold, especially with glutaraldehyde-fixed tissue which is not easily penetrated by gold particles.     

A numerical model of an intensive care ventilator-humidifier system

Cryofixation followed by freeze substitution in osmium tetroxide was evaluated as a method for preparing biological specimens for immunoelectronmicroscopy. Samples were rapidly frozen by impact onto a sapphire block cooled with liquid nitrogen, substituted at -80 degrees C in acetone containing osmium tetroxide, and embedded in epoxy resin. With this protocol, excellent ultrastructure can be combined with localization of antigens that otherwise would be inactivated by the osmium, but labeling may need to be enhanced by chemically etching the sections prior to staining. The effects of etching on various structures in the sections were investigated by examining the sections with atomic force microscopy, an approach that yields three-dimensional views of the surface of the section. A considerable part of the section was removed or collapsed by the etching, and these effects occurred differentially in several components of the tissue and with different etching protocols. Nevertheless, the results suggest that the partial removal of the plastic by etching of freeze-substituted tissue can be explored as a method for exposing fine biological structures for observation with atomic force microscopy.     

Microwave procedures for electron microscopy and resin-embedded sections

Microwaves now have well-established applications in routine light microscopy. They are employed in tissue fixation and to accelerate a wide spectrum of staining procedures. Besides producing superior preservation of cellular antigens through microwave fixation, this form of irradiation has been employed for antigen retrieval, a procedure that has been a major factor in the optimization of immunolabelling in paraffin sections and cytological preparations. A commercial tissue processor has recently been developed which employs microwaves in a markedly accelerated, one-step processing of tissue blocks, completing the procedure within a fraction of conventional times. Microwaves have also been successfully applied in a variety of molecular techniques such as in situ hybridization and polymerase chain reaction. The adoption of microwaves in electron microscopic procedures has been slower, largely because the requirement for speed in processing is not as great, except in diagnostic samples. However, as this review will show, there are equally as many innovative applications of microwaves in electron microscopy. Microwaves have been employed for rapid processing of fine needle aspiration biopsy samples, in keeping with the requirement for speed in this method of diagnosis. Ultrafast fixation of tissue samples has resulted in the better demonstration of cellular enzymes and proteins. It has been clearly shown that microwave-stimulated on grid staining in uranyl acetate and lead citrate produces more consistent results and without background precipitation. Microwaves can be used to hasten resin polymerization and exposure to microwaves results in antigen retrieval in both resin-embedded thick sections and for immuno-electron microscopy. Immunolabelling shows enhanced sensitivity and the technique is anticipated to contribute greatly to the optimization of immuno-electron microscopy. The potential for greatly accelerated preparation of samples for electron microscopy exists but is yet to be fully realized.     

Antibody penetration into LR-White sections

The purpose of this investigation is to study the ability of antibodies to penetrate sections of LR-WHITE resin. The methods used in this study were the following: (1) Reembedding of sections labeled with immunogold (1 nm) and peroxidase/DAB/gold chloride, (2) tilting of ultrathin sections treated with immunogold (1 nm), (3) immunolabeling of cylindrical structures embedded in LR-WHITE, (4) application of primary and secondary antibodies on opposite sides of ultrathin sections. Fibrin and human pituitary tissue was embedded in LR-WHITE and treated with anti-fibrinogen or anti-ACTH respectively (ACTH = Adrenocorticotropic hormone). No indication of antibody penetration into the section were found with either of the methods, contrary to findings in earlier publications. The significance of this result is that antigens cannot be demonstrated in the interior of LR-WHITE sections with post-embedding techniques. Furthermore, LR-WHITE resin may be used for quantitative immunoelectron microscopy, and the resin may be used for double immunogold labeling since the application of immunoreagents on opposite sides of the sections is completely safe.     

A hydrophilic resin-embedding method for light and electron microscopic detection of tissue anionic sites with cationic colloidal iron: as applied to mouse Paneth cells

A cationic colloidal iron method was introduced for electron microscopic detection of anionic sites in hydrophilic resin-embedded specimens, and the method was applied to Paneth cells of the mouse jejunum. Mouse jejunal blocks were embedded in hydrophilic acrylic resin (LR White), cut into ultrathin sections, stained with the diluted cationic colloidal iron, and exposed to osmium vapor. The jejunal tissues, including the Paneth cells, embedded in hydrophilic resin were reactive to the fine cationic colloidal iron. At pH value 1.5, fine electron dense colloidal iron deposited along the rims of the secretory granules and the Golgi apparatus of the Paneth cell. Colloidal particles distributed on the osmiophilic reticular structures in the rim and in dot-like fashion lined the border between the granular core and rim. At pH value 4.0, ribosomes reacted to cationic colloidal iron particles in addition to the granular rims and Golgi apparatus. At pH 7.0, even the cores of the secretory granules were stained. Semi-thin sections prepared from the LR White-embedded specimens and stained at pH 1.5 with the diluted (1:3 in volume) cationic colloidal iron showed sufficient Prussian blue reaction for light microscopy in the rims of Paneth granules and mucus of goblet cells. This method is therefore useful for correlative light and electron microscopic detection of tissue anionic sites, including sulfate, carboxyl and phosphate groups, at various pH values.     

Identification of functional connections between calmodulin and the yeast actin cytoskeleton

For scarce antigens or antigens which are embedded in a dense macromolecular structure, on-section labeling, the first method of choice, is not always successful. Often, the antigen can be localized by immunofluorescence microscopy, usually by a pre-embedding labeling method. Most of these methods lead to loss of ultrastructural details and, hence, labeling at electron microscope resolution does not add essential information. The scope of this paper is to compare five permeabilization methods for pre-embedding labelling for electron microscopy. We aim for a method that is easy to use and suitable for routine investigations. For our ongoing work, special attention is given to labeling of the cell nucleus. Accessibility of cytoplasmic and nuclear antigens is monitored with a set of different marker antibodies. From this investigation, we suggest that prefixation with formaldehyde/glutaraldehyde is necessary to stabilize the ultrastructure before using a detergent (Triton X-100 or Brij 58) to permeabilize or remove the membranes. The experimental conditions for labeling should be checked first with fluorescence or fluorescence-gold markers by fluorescence microscopy. Then either ultrasmall gold particles (with or without fluorochrome) with silver enhancement or, if the ultrasmall gold particles are obstructed, peroxidase markers are advised. The most promising technique to localize scarce antigens with good contrast is the combination of a pre-embedding peroxidase/tyramide-FITC or -biotin labeling followed by an on-section colloidal gold detection.     

Overexpression of cardiotrophin-1 and gp130 during experimental acute Chagasic cardiomyopathy

The purpose of this study was to examine how antigen retrieval affected the yield of immunogold labeling on epoxy sections based on embedding with different amounts of accelerator. The concentration of accelerator DMP-30 (tri(dimethyl amino methyl) phenol) was varied in the range of 0-8% in the processing of the tissue for epoxy embedding. Immunogold labeling was performed on epoxy sections and LR-White sections of fibrin clots and renal tissue with IgG-deposits, and the antibodies used were anti-fibrinogen anti-IgG and, respectively. For some of the sections antigen retrieval was performed by heating the sections in citrate buffer. In all cases, the yield of immunogold labeling increased following antigen retrieval. The increase (%) in the yield of immunogold labeling as a result of antigen retrieval was larger for epoxy sections than for LR-White sections. The immunolabeling on high-accelerator epoxy sections exposed to antigen retrieval was about 20% more intense than on untreated LR-White sections both for IgG and fibrinogen. In addition to breaking fixations bonds introduced by the chemical fixation, we believe that the antigen retrieval also breaks bonds between the epoxy resin and the embedded tissue. The combination of increased amount of accelerator during tissue processing for epoxy embedding and antigen retrieval by heating in citrate buffer is a potent method for increasing specific immunolabeling on epoxy sections.     

A method of combining biocytin tract-tracing with avidin-biotin-peroxidase complex immunocytochemistry for pre-embedding electron microscopic labeling in neonatal tissue

A new method that allows the combination of avidin-biotin-peroxidase visualization of antigens and silver-intensified gold labeling of biocytin, a rapid tract-tracer, is described. The method provides a practical tool for in vivo and in vitro studies of chemically specified afferent-target relationships and particularly in developing neural pathways where biocytin is invaluable as a rapidly transporting, sensitive tracer requiring little permeabilizing agents. Transported biocytin was first visualized with silver-intensified colloidal gold conjugated to anti-biotin IgG. This was followed by blocking of all unbound biotin groups of biocytin in the tissue with an Avidin-Biotin blocking kit. Finally, a second antigen, neuronal nitric oxide synthase NOS or GluR2/3 subunit of AMPA receptors, was visualized selectively with avidin-biotin-peroxidase/DAB. This protocol allowed visualization of two chromagens that could be distinguished by electron microscopy. The presence of biocytin was evident by silver particles, while accumulation of peroxidase reaction product marked only the antibody labeling: no cross-reaction between biocytin and the avidin-biotin-peroxidase was observed.     

A fluid-phase endocytotic capacity and intracellular degradation of a foreign protein (horseradish peroxidase) by lysosomal cysteine proteinases in the rat junctional epithelium

We investigated the co-localization of lysosomal cathepsins B, H and L, and horseradish peroxidase (HRP) in junctional epithelial (JE) cells both as a fluid-phase endocytotic marker to demonstrate the fluid-phase endocytotic capacity of JE cells, and to understand the morphological relationships of the endocytosed foreign substances to lysosomal cathepsins in these cells. The diaminobenzidine (DAB) histochemical and cytochemical methods and immunohistochemical avidin-biotin-peroxidase complex and immunocytochemical post-embedding colloidal gold methods were used. Under light microscopy, DAB reaction products based on HRP were found in JE but were rare or absent in the oral sulcular epithelium and oral epithelium. Immunolabeling for cathepsins B and H was found in the granular structures of the cells, but no cathepsin L was identified. With electron microscopy, DAB reaction products, which indicated both HRP and the azurophil granules of neutrophils, were endocytosed into JE cells. Using a post-embedding technique, gold particles indicating HRP were present on the plasma membrane of JE cells, at the periphery of electronlucent vacuoles, and in the electrondense granules. Gold particles indicating cathepsin B or H were found in the electrondense granules. With different sizes of colloidal golds, the co-localization of cathepsin B or H with HRP was indicated only in the electrondense portion of the larger vacuoles consisting of electronlucent and -dense parts. This study provided the first morphological data which indicate that JE has a fluid phase endocytotic capacity, and which suggest that the lysosomal cathepsins B and H are involved in the intracellular degradation of foreign substances invading through the gingival sulcus in JE cells.     

Functional disabilities of disabled workers in vocational aid facilities and a social welfare factory

Detection of nucleic acid sequence at the ultrastructural level has allowed us to better understand the expression of genes in some fields of application in cell biology. In situ hybridization at the ultrastructural level can be carried out using three different methods: on vibratome sections before embedding in epoxy resin, on ultrathin frozen section, or on ultrathin section of tissue embedded in hydrophilic resin such as Lowicryl. Before starting the detection of nucleic acid sequences at the electron microscope level, the experimenter has to choose various parameters; the type of tissue fixation, the probe and its label, and the in situ hybridization method, depending on the sensitivity, the resolution and the ultrastructural preservation required. This review of technical aspects, by describing the different methods of ultrastructural in situ hybridization, will help the experimenter to optimize each step of the hybridization procedure.     

Ultrastructural localization of cellular prion protein (PrPc) at the neuromuscular junction

We examined the localization of the normal cellular isoform of prion protein (PrPc) in mammalian skeletal muscle. Using two anti-PrP antibodies, the neuromuscular junction (NMJ) was preferentially stained after immunohistofluorescence. The mouse, hamster, and human NMJ displayed a fluorescent signal specific for PrPc. Postembedding immunoelectron microscopy analysis performed in the mouse muscle showed that the PrPc-specific colloidal gold immunolabelling was concentrated over the sarcoplasmic cytoplasm. The membrane of the postsynaptic domain was devoid of gold particles, while a weak signal was occasionally observed close to the presynaptic vesicles of the terminal axons. These results indicate that the PrP gene is expressed in mammalian muscle at the NMJ. The subsynaptic sarcoplasm of the NMJ appears to be the privileged site where PrPc presumably associated with endosome membrane may play a role in either physiological activity or maintenance of the morphological integrity of the synapse.     

Clear acrylic resin T-bar used in denture identification

A preformed, T-shaped, clear acrylic resin bar can be utilized as a vehicle for identification of an existing removable dental prosthesis. A printed label attached to the T-bar makes a convenient vehicle for embedding the label in the prosthesis with light-cured acrylic resin. The resultant finished surface of the T-bar assembly provides a protective cover and an exceptionally clear window for viewing the label. The procedure is time-effective and relatively easy.     

Characterization of extracellular proteinases of Tritrichomonas foetus

BACKGROUND: Previously it has been difficult to localize in histological sections fluorescent dyes used to label living cells in early embryos. Fluorescent dyes typically are readily soluble in alcohol, xylene, and other common solvents used for conventional paraffin processing. Consequently, they are lost during paraffin embedment. Loss of label can be circumvented with the use of frozen sections, but this technique is laborious to use with young gastrulating and neurulating embryos and it is difficult to obtain consistently high-quality serial sections. Alternative methods such as photoconversion have been used with the fluorescent carbocyanine dye DiI. In this procedure, a diaminobenzidine (DAB)-insoluble reaction product can be deposited in the tissues of whole embryos (using UV photoconversion), which can later be viewed in conventional paraffin sections, but this method is time intensive, technically demanding, and allows for processing of only a single embryo at a time. Moreover, in our hands photoconversion produces inconsistent results and frequently yields significant nonspecific staining. METHODS: We have developed an immunohistochemically based process for demonstrating cells labeled with the fluorescent dye [5- (and -6)-carboxyfluorescein diacetate, succinimidyl ester (CFSE)]. With this new technique, cells labeled in living embryos with CFSE can be viewed after later development, first in whole mounts and subsequently in conventional paraffin serial sections. Typically, selected regions of mouse and chick embryos are injected with dye, cultured for periods of about 24 h, viewed with fluorescence microscopy (and recorded on videotape) using an appropriate filter set, and fixed with a formaldehyde-based fixative. An antifluorescein antibody is next bound to the fluorescein groups of CFSE, and an insoluble reaction product is then generated using a horseradish peroxidase (HRP)-conjugated secondary antibody and DAB. RESULTS: The DAB reaction product deposited with our novel technique can be seen readily in whole mounts using standard stereo light microscopy, providing a permanent label. Moreover, after routine processing for paraffin embedment and histological serial sectioning, the reaction product persists, allowing detailed analyses of the positions and fates of labeled cells. CONCLUSIONS: This simple, immunocytochemical technique, tested in both mouse and chick embryos, provides a highly specific, permanent, and reproducible method for localizing descendants of fluorescently labeled living cells in conventional paraffin sections.     

A characterisation of dark-field imaging of colloidal gold labels in a scanning transmission X-ray microscope

While X-ray microscopes provide images of biological specimens for which the contrast is mainly due to the difference in the absorption of carbon and oxygen when X-rays transmitted through the specimen are detected, signals other than absorption can also be used to form images. Using the Stony Brook scanning transmission X-ray microscope at the National Synchrotron Light Source, high-angle dark-field images have been formed of cells labelled with colloidal gold, with and without silver enhancement. The high density of the colloidal gold particles, or the silver particles seeded by the gold, leads to a large scattering signal, and the fact that the particle diameters are comparable to the width of the microscope point spread function results in good localisation of the label with high contrast. The dark-field images can have a greater signal to noise ratio than bright-field images acquired with the same incident X-ray dose. The theory of dark-and bright-field imaging is reviewed. Theoretical calculations of scattering from gold and silver particles are presented and good agreement is found between these and experimental dark-field images of 30 nm diameter gold particles. The signal to noise ratios of experimental bright-and dark-field images are measured and found to be in agreement with theory. Images are presented of cells labelled by immunolabelling and in situ hybridisation.     

Suggestibility in hypochondriacal patients and healthy control subjects. An experimental case-control study

The effects of slow freezing and thawing on enzyme compartmentalization and ultrastructure were studied in rat liver slices frozen in dry ice, isopentane/ethanol-dry ice, or liquid nitrogen, and stored at -80 degrees C for 1-14 days. Non-frozen slices served as controls. Frozen liver slices were thawed in a Karnovsky fixative and processed for transmission electron microscopy (TEM). After all freezing protocols, the outer zone of frozen-thawed tissue was ultrastructurally very similar to that of non-frozen liver. Towards the center of the tissue, the ultrastructure progressively deteriorated. Comparison with 50-microm cryostat sections prepared for TEM showed that thawing and not freezing is the detrimental step for fair preservation of ultrastructure. After thawing, homogenization, and differential centrifugation, distribution patterns of soluble marker enzymes were analyzed (cytosol, lactate dehydrogenase; mitochondrial matrix, glutamate dehydrogenase; lysosomes, acid phosphatase). The enzyme activities were not affected by storage for 2 weeks and the activity distributions showed that protein leakage from compartments was only minimally increased in frozen-thawed tissue compared with that from non-frozen tissue, irrespective of the method of freezing. In conclusion, fairly large tissue slices (20x5x3 mm) may be frozen and stored at -80 degrees C for biochemical, ultrahistochemical or ultrastructural studies. For ultrastructural analysis, only the periphery of the tissue slice should be used.     

High resolution immunogold analysis reveals distinct subcellular compartmentation of protein kinase C gamma and delta in rat Purkinje cells

High resolution immunogold cytochemistry was used to investigate the subcellular distribution of protein kinase C gamma and delta in Purkinje cells of the rat cerebellum. Postembedding incubation with an antibody raised to a peptide sequence near the C-terminus of protein kinase C gamma resulted in strong labelling along the dendrosomatic plasma membrane. A quantitative analysis indicated that this labelling reflected the existence of two pools of protein kinase C gamma; one membrane associated pool and one cytoplasmic pool located within 50 nm of the plasma membrane. The labelling along the plasma membrane showed a pronounced and abrupt increase when moving from the cell body into the axon initial segment. Gold particles signalling protein kinase C gamma were also enriched in putative Purkinje axon terminals in the dentate nucleus. The only organelle showing a consistent immunolabelling for protein kinase C gamma was the Golgi apparatus where the gold particles were restricted to the trans face. Protein kinase C gamma immunoreactivity also occurred in the Purkinje cell spines, with an enrichment in or near the postsynaptic density. Antibodies to protein kinase C delta produced a very different labelling pattern in the Purkinje cells. Most of the gold particles were associated with rough endoplasmic reticulum, particularly with those cisternae that were located close to the nucleus or in the nuclear indentations. No significant protein kinase C delta immunolabelling was detected at the plasma membrane or in Purkinje cell spines. The present data point to a highly specific compartmentation of the two major protein kinase C isozymes in Purkinje cells and suggest that these isozymes act on different substrates and hence have different regulatory functions within these neurons.     

-Coexistence of neural proliferations with early epithelial neoplasias and benign ectopias of the uterine cervix-

A method for processing and embedding alginate-polylysine microencapsulated pancreatic tissue in glycol methacrylate resin (GMA) is described. Fixation in 4% phosphate buffered formaldehyde, processing in ascending concentrations of glycol methacrylate monomer and embedding in Technovit 7100 results in well preserved morphological details of hydrogels, hydrogel-cell interfaces, and encapsulated pancreatic tissue. Routine staining with Loeffler's methylene blue, hematoxylin and eosin, and Romanovsky-Giemsa gave excellent images of the GMA embedded alginate polylysine membrane and tissues allowing cells on the outside of the capsule to be analyzed effectively as part of the foreign body reaction against the capsule membrane.     

Breeding of Philander frenata (Didelphimorphia, Didelphidae) in captivity

STATEMENT OF PROBLEM: Because water sorption of autopolymerizing acrylic reline resins is accompanied by volumetric change, it is a physical property of importance. As residual monomer leaches into the oral fluids and causes tissue irritation, low solubility of these resins is desired. Another requirement is a satisfactory bond between the autopolymerizing acrylic resins and the denture base acrylic resin. PURPOSE: This study compared the water sorption, solubility, and the transverse bond strength of 2 autopolymerizing acrylic resins (Duraliner II and Kooliner) and 1 heat-polymerizing acrylic resin (Lucitone 550). MATERIAL AND METHODS: The water sorption and solubility test was performed as per International Standards Organization Specification No. 1567 for denture base polymers. Bond strengths between the autopolymerizing acrylic resins and the heat-polymerizing acrylic resin were determine with a 3-point loading test made on specimens immersed in distilled water at 37 degrees C for 50 hours and for 30 days. Visual inspection determined whether failures were adhesive or cohesive. RESULTS: Duraliner II acrylic resin showed significantly lower water sorption than Kooliner and Lucitone 550 acrylic resins. No difference was noted in the solubility of all materials. Kooliner acrylic resin demonstrated significantly lower transverse bond strength to denture base acrylic resin and failed adhesively. The failures seen with Duraliner II acrylic resin were primarily cohesive in nature. CONCLUSIONS: Autopolymerizing acrylic reline resins met water sorption and solubility requirements. However, Kooliner acrylic resin demonstrated significantly lower bond strength to denture base acrylic resin.